LinuxLists.cc - [PATCH v3 0/4] NVMEM cells in sysfs

2023-06-05 13:57:00

Subject: [PATCH v3 0/4] NVMEM cells in sysfs

Hello,

As part of a previous effort, support for dynamic NVMEM layouts was
brought into mainline, helping a lot in getting information from NVMEM
devices at non-static locations. One common example of NVMEM cell is the
MAC address that must be used. Sometimes the cell content is mainly (or
only) useful to the kernel, and sometimes it is not. Users might also
want to know the content of cells such as: the manufacturing place and
date, the hardware version, the unique ID, etc. Two possibilities in
this case: either the users re-implement their own parser to go through
the whole device and search for the information they want, or the kernel
can expose the content of the cells if deemed relevant. This second
approach sounds way more relevant than the first one to avoid useless
code duplication, so here is a series bringing NVMEM cells content to
the user through sysfs.

Here is a real life example with a Marvell Armada 7040 TN48m switch:

$ nvmem=/sys/bus/nvmem/devices/1-00563/
$ for i in `ls -1 $nvmem/cells/*`; do basename $i; hexdump -C $i | head -n1; done
country-code
00000000 54 57 |TW|
crc32
00000000 bb cd 51 98 |..Q.|
device-version
00000000 02 |.|
diag-version
00000000 56 31 2e 30 2e 30 |V1.0.0|
label-revision
00000000 44 31 |D1|
mac-address
00000000 18 be 92 13 9a 00 |......|
manufacture-date
00000000 30 32 2f 32 34 2f 32 30 32 31 20 31 38 3a 35 39 |02/24/2021 18:59|
manufacturer
00000000 44 4e 49 |DNI|
num-macs
00000000 00 40 |.@|
onie-version
00000000 32 30 32 30 2e 31 31 2d 56 30 31 |2020.11-V01|
platform-name
00000000 38 38 46 37 30 34 30 2f 38 38 46 36 38 32 30 |88F7040/88F6820|
product-name
00000000 54 4e 34 38 4d 2d 50 2d 44 4e |TN48M-P-DN|
serial-number
00000000 54 4e 34 38 31 50 32 54 57 32 30 34 32 30 33 32 |TN481P2TW2042032|
vendor
00000000 44 4e 49 |DNI|

Here is a list of known limitations though:
* It is currently not possible to know whether the cell contains ASCII
or binary data, so by default all cells are exposed in binary form.
* For now the implementation focuses on the read aspect. Technically
speaking, in some cases, it could be acceptable to write the cells, I
guess, but for now read-only files sound more than enough. A writable
path can be added later anyway.
* The sysfs entries are created when the device probes, not when the
NVMEM driver does. This means, if an NVMEM layout is used *and*
compiled as a module *and* not installed properly in the system (a
usermode helper tries to load the module otherwise), then the sysfs
cells won't appear when the layout is actually insmod'ed because the
sysfs folders/files have already been populated.

Changes in v3:
* Patch 1 is new: fix a style issue which bothered me when reading the
core.
* Patch 2 is new: Don't error out when an attribute group does not
contain any attributes, it's easier for developers to handle "empty"
directories this way. It avoids strange/bad solutions to be
implemented and does not cost much.
* Drop the is_visible hook as it is no longer needed.
* Stop allocating an empty attribute array to comply with the sysfs core
checks (this check has been altered in the first commits).
* Fix a missing tab in the ABI doc.

Changes in v2:
* Do not mention the cells might become writable in the future in the
ABI documentation.
* Fix a wrong return value reported by Dan and kernel test robot.
* Implement .is_bin_visible().
* Avoid overwriting the list of attribute groups, but keep the cells
attribute group writable as we need to populate it at run time.
* Improve the commit messages.
* Give a real life example in the cover letter.

Miquel Raynal (4):
sysfs: Improve readability by following the kernel coding style
sysfs: Skip empty folders creation
ABI: sysfs-nvmem-cells: Expose cells through sysfs
nvmem: core: Expose cells through sysfs

Documentation/ABI/testing/sysfs-nvmem-cells | 19 +++
drivers/nvmem/core.c | 128 +++++++++++++++++++-
fs/sysfs/group.c | 12 +-
3 files changed, 151 insertions(+), 8 deletions(-)
create mode 100644 Documentation/ABI/testing/sysfs-nvmem-cells

--
2.34.1

2023-06-05 13:59:04

by Miquel Raynal

[permalink] [raw]

Subject: [PATCH v3 4/4] nvmem: core: Expose cells through sysfs

The binary content of nvmem devices is available to the user so in the
easiest cases, finding the content of a cell is rather easy as it is
just a matter of looking at a known and fixed offset. However, nvmem
layouts have been recently introduced to cope with more advanced
situations, where the offset and size of the cells is not known in
advance or is dynamic. When using layouts, more advanced parsers are
used by the kernel in order to give direct access to the content of each
cell, regardless of its position/size in the underlying
device. Unfortunately, these information are not accessible by users,
unless by fully re-implementing the parser logic in userland.

Let's expose the cells and their content through sysfs to avoid these
situations. Of course the relevant NVMEM sysfs Kconfig option must be
enabled for this support to be available.

Not all nvmem devices expose cells. Indeed, the .bin_attrs attribute
group member will be filled at runtime only when relevant and will
remain empty otherwise. In this case, as the cells attribute group will
be empty, it will not lead to any additional folder/file creation.

Exposed cells are read-only. There is, in practice, everything in the
core to support a write path, but as I don't see any need for that, I
prefer to keep the interface simple (and probably safer). The interface
is documented as being in the "testing" state which means we can later
add a write attribute if though relevant.

There is one limitation though: if a layout is built as a module but is
not properly installed in the system and loaded manually with insmod
while the nvmem device driver was built-in, the cells won't appear in
sysfs. But if done like that, the cells won't be usable by the built-in
kernel drivers anyway.

Signed-off-by: Miquel Raynal <[email protected]>
---
drivers/nvmem/core.c | 128 +++++++++++++++++++++++++++++++++++++++++--
1 file changed, 124 insertions(+), 4 deletions(-)

diff --git a/drivers/nvmem/core.c b/drivers/nvmem/core.c
index 342cd380b420..625e3de273b7 100644
--- a/drivers/nvmem/core.c
+++ b/drivers/nvmem/core.c
@@ -325,6 +325,61 @@ static umode_t nvmem_bin_attr_is_visible(struct kobject *kobj,
return nvmem_bin_attr_get_umode(nvmem);
}

+static struct nvmem_cell *nvmem_create_cell(struct nvmem_cell_entry *entry,
+ const char *id, int index);
+
+static ssize_t nvmem_cell_attr_read(struct file *filp, struct kobject *kobj,
+ struct bin_attribute *attr, char *buf,
+ loff_t pos, size_t count)
+{
+ struct nvmem_cell_entry *entry;
+ struct nvmem_cell *cell = NULL;
+ struct nvmem_device *nvmem;
+ size_t cell_sz, read_len;
+ struct device *dev;
+ void *content;
+
+ if (attr->private)
+ dev = attr->private;
+ else
+ dev = kobj_to_dev(kobj);
+ nvmem = to_nvmem_device(dev);
+
+ mutex_lock(&nvmem_mutex);
+ list_for_each_entry(entry, &nvmem->cells, node) {
+ if (strncmp(entry->name, attr->attr.name, XATTR_NAME_MAX))
+ continue;
+
+ cell = nvmem_create_cell(entry, entry->name, 0);
+ if (IS_ERR(cell)) {
+ mutex_unlock(&nvmem_mutex);
+ return PTR_ERR(cell);
+ }
+
+ break;
+ }
+ mutex_unlock(&nvmem_mutex);
+
+ if (!cell)
+ return -EINVAL;
+
+ content = nvmem_cell_read(cell, &cell_sz);
+ if (IS_ERR(content)) {
+ read_len = PTR_ERR(content);
+ goto destroy_cell;
+ }
+
+ read_len = min_t(unsigned int, cell_sz - pos, count);
+ memcpy(buf, content + pos, read_len);
+ kfree(content);
+
+destroy_cell:
+ kfree_const(cell->id);
+ kfree(cell);
+
+ return read_len;
+}
+
/* default read/write permissions */
static struct bin_attribute bin_attr_rw_nvmem = {
.attr = {
@@ -346,8 +401,14 @@ static const struct attribute_group nvmem_bin_group = {
.is_bin_visible = nvmem_bin_attr_is_visible,
};

+/* Cell attributes will be dynamically allocated */
+static struct attribute_group nvmem_cells_group = {
+ .name = "cells",
+};
+
static const struct attribute_group *nvmem_dev_groups[] = {
&nvmem_bin_group,
+ &nvmem_cells_group,
NULL,
};

@@ -406,6 +467,59 @@ static void nvmem_sysfs_remove_compat(struct nvmem_device *nvmem,
device_remove_bin_file(nvmem->base_dev, &nvmem->eeprom);
}

+static int nvmem_populate_sysfs_cells(struct nvmem_device *nvmem)
+{
+ struct bin_attribute **cells_attrs, *attrs;
+ struct nvmem_cell_entry *entry;
+ unsigned int ncells = 0, i = 0;
+ int ret = 0;
+
+ mutex_lock(&nvmem_mutex);
+
+ if (list_empty(&nvmem->cells))
+ goto unlock_mutex;
+
+ list_for_each_entry(entry, &nvmem->cells, node)
+ ncells++;
+
+ /* Allocate an array of attributes with a sentinel */
+ cells_attrs = devm_kcalloc(&nvmem->dev, ncells + 1,
+ sizeof(struct bin_attribute *), GFP_KERNEL);
+ if (!cells_attrs) {
+ ret = -ENOMEM;
+ goto unlock_mutex;
+ }
+
+ attrs = devm_kcalloc(&nvmem->dev, ncells, sizeof(struct bin_attribute), GFP_KERNEL);
+ if (!attrs) {
+ ret = -ENOMEM;
+ goto unlock_mutex;
+ }
+
+ /* Initialize each attribute to take the name and size of the cell */
+ list_for_each_entry(entry, &nvmem->cells, node) {
+ sysfs_bin_attr_init(&attrs[i]);
+ attrs[i].attr.name = devm_kstrdup(&nvmem->dev, entry->name, GFP_KERNEL);
+ attrs[i].attr.mode = 0444;
+ attrs[i].size = entry->bytes;
+ attrs[i].read = &nvmem_cell_attr_read;
+ if (!attrs[i].attr.name) {
+ ret = -ENOMEM;
+ goto unlock_mutex;
+ }
+
+ cells_attrs[i] = &attrs[i];
+ i++;
+ }
+
+ nvmem_cells_group.bin_attrs = cells_attrs;
+
+unlock_mutex:
+ mutex_unlock(&nvmem_mutex);
+
+ return ret;
+}
+
#else /* CONFIG_NVMEM_SYSFS */

static int nvmem_sysfs_setup_compat(struct nvmem_device *nvmem,
@@ -976,16 +1090,22 @@ struct nvmem_device *nvmem_register(const struct nvmem_config *config)
if (rval)
goto err_remove_cells;

+ rval = nvmem_add_cells_from_layout(nvmem);
+ if (rval)
+ goto err_remove_cells;
+
+#ifdef CONFIG_NVMEM_SYSFS
+ rval = nvmem_populate_sysfs_cells(nvmem);
+ if (rval)
+ goto err_remove_cells;
+#endif
+
dev_dbg(&nvmem->dev, "Registering nvmem device %s\n", config->name);

rval = device_add(&nvmem->dev);
if (rval)
goto err_remove_cells;

- rval = nvmem_add_cells_from_layout(nvmem);
- if (rval)
- goto err_remove_cells;
-
blocking_notifier_call_chain(&nvmem_notifier, NVMEM_ADD, nvmem);

return nvmem;
--
2.34.1

2023-06-05 14:04:03

by Miquel Raynal

[permalink] [raw]

Subject: [PATCH v3 3/4] ABI: sysfs-nvmem-cells: Expose cells through sysfs

2023-06-06 10:56:38

by Srinivas Kandagatla

[permalink] [raw]

Subject: Re: [PATCH v3 4/4] nvmem: core: Expose cells through sysfs

Thanks for doing this Miquel

Few minor comments below.

On 05/06/2023 14:34, Miquel Raynal wrote:
> The binary content of nvmem devices is available to the user so in the
> easiest cases, finding the content of a cell is rather easy as it is
> just a matter of looking at a known and fixed offset. However, nvmem
> layouts have been recently introduced to cope with more advanced
> situations, where the offset and size of the cells is not known in
> advance or is dynamic. When using layouts, more advanced parsers are
> used by the kernel in order to give direct access to the content of each
> cell, regardless of its position/size in the underlying
> device. Unfortunately, these information are not accessible by users,
> unless by fully re-implementing the parser logic in userland.
>
> Let's expose the cells and their content through sysfs to avoid these
> situations. Of course the relevant NVMEM sysfs Kconfig option must be
> enabled for this support to be available.
>
> Not all nvmem devices expose cells. Indeed, the .bin_attrs attribute
> group member will be filled at runtime only when relevant and will
> remain empty otherwise. In this case, as the cells attribute group will
> be empty, it will not lead to any additional folder/file creation.
>
> Exposed cells are read-only. There is, in practice, everything in the
> core to support a write path, but as I don't see any need for that, I
> prefer to keep the interface simple (and probably safer). The interface
> is documented as being in the "testing" state which means we can later
> add a write attribute if though relevant.
>
> There is one limitation though: if a layout is built as a module but is
> not properly installed in the system and loaded manually with insmod
> while the nvmem device driver was built-in, the cells won't appear in
> sysfs. But if done like that, the cells won't be usable by the built-in
> kernel drivers anyway.
>
> Signed-off-by: Miquel Raynal <[email protected]>
> ---
> drivers/nvmem/core.c | 128 +++++++++++++++++++++++++++++++++++++++++--
> 1 file changed, 124 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/nvmem/core.c b/drivers/nvmem/core.c
> index 342cd380b420..625e3de273b7 100644
> --- a/drivers/nvmem/core.c
> +++ b/drivers/nvmem/core.c
> @@ -325,6 +325,61 @@ static umode_t nvmem_bin_attr_is_visible(struct kobject *kobj,
> return nvmem_bin_attr_get_umode(nvmem);
> }
>
> +static struct nvmem_cell *nvmem_create_cell(struct nvmem_cell_entry *entry,
> + const char *id, int index);
> +
> +static ssize_t nvmem_cell_attr_read(struct file *filp, struct kobject *kobj,
> + struct bin_attribute *attr, char *buf,
> + loff_t pos, size_t count)
> +{
> + struct nvmem_cell_entry *entry;
> + struct nvmem_cell *cell = NULL;
> + struct nvmem_device *nvmem;
> + size_t cell_sz, read_len;
> + struct device *dev;
> + void *content;
> +
> + if (attr->private)
> + dev = attr->private;
I see no point in this, as we do not set any private data for this
attribute.

How about storing nvmem_cell_entry in private and using it here.
This should also avoid looping for every cell in the follow on code.

> + else
> + dev = kobj_to_dev(kobj);

new line here.

> + nvmem = to_nvmem_device(dev);
> +
> + mutex_lock(&nvmem_mutex);
> + list_for_each_entry(entry, &nvmem->cells, node) {
> + if (strncmp(entry->name, attr->attr.name, XATTR_NAME_MAX))
> + continue;
> +
> + cell = nvmem_create_cell(entry, entry->name, 0);

> + if (IS_ERR(cell)) {
> + mutex_unlock(&nvmem_mutex);
> + return PTR_ERR(cell);
> + }
> +
> + break;
> + }
> + mutex_unlock(&nvmem_mutex);
> +
> + if (!cell)
> + return -EINVAL;
> +
> + content = nvmem_cell_read(cell, &cell_sz);
> + if (IS_ERR(content)) {
> + read_len = PTR_ERR(content);
> + goto destroy_cell;
> + }
> +
> + read_len = min_t(unsigned int, cell_sz - pos, count); > + memcpy(buf, content + pos, read_len);
> + kfree(content);
> +
> +destroy_cell:
> + kfree_const(cell->id);
> + kfree(cell);
> +
> + return read_len;
> +}
> +
> /* default read/write permissions */
> static struct bin_attribute bin_attr_rw_nvmem = {
> .attr = {
> @@ -346,8 +401,14 @@ static const struct attribute_group nvmem_bin_group = {
> .is_bin_visible = nvmem_bin_attr_is_visible,
> };
>
> +/* Cell attributes will be dynamically allocated */
> +static struct attribute_group nvmem_cells_group = {
> + .name = "cells",
> +};
> +
> static const struct attribute_group *nvmem_dev_groups[] = {
> &nvmem_bin_group,
> + &nvmem_cells_group,
> NULL,
> };
>
> @@ -406,6 +467,59 @@ static void nvmem_sysfs_remove_compat(struct nvmem_device *nvmem,
> device_remove_bin_file(nvmem->base_dev, &nvmem->eeprom);
> }
>
> +static int nvmem_populate_sysfs_cells(struct nvmem_device *nvmem)
> +{
> + struct bin_attribute **cells_attrs, *attrs;
> + struct nvmem_cell_entry *entry;
> + unsigned int ncells = 0, i = 0;
> + int ret = 0;
> +
> + mutex_lock(&nvmem_mutex);
> +
> + if (list_empty(&nvmem->cells))
> + goto unlock_mutex;
> +
> + list_for_each_entry(entry, &nvmem->cells, node)
> + ncells++;

list_count_nodes?

> +
> + /* Allocate an array of attributes with a sentinel */
> + cells_attrs = devm_kcalloc(&nvmem->dev, ncells + 1,
> + sizeof(struct bin_attribute *), GFP_KERNEL);
> + if (!cells_attrs) {
> + ret = -ENOMEM;
> + goto unlock_mutex;
> + }
> +
> + attrs = devm_kcalloc(&nvmem->dev, ncells, sizeof(struct bin_attribute), GFP_KERNEL);
> + if (!attrs) {
> + ret = -ENOMEM;
> + goto unlock_mutex;
> + }
> +
> + /* Initialize each attribute to take the name and size of the cell */
> + list_for_each_entry(entry, &nvmem->cells, node) {
> + sysfs_bin_attr_init(&attrs[i]);
> + attrs[i].attr.name = devm_kstrdup(&nvmem->dev, entry->name, GFP_KERNEL);
> + attrs[i].attr.mode = 0444;
> + attrs[i].size = entry->bytes;
> + attrs[i].read = &nvmem_cell_attr_read;
> + if (!attrs[i].attr.name) {
> + ret = -ENOMEM;
> + goto unlock_mutex;
> + }
> +
> + cells_attrs[i] = &attrs[i];
> + i++;
> + }
> +
> + nvmem_cells_group.bin_attrs = cells_attrs;
> +
> +unlock_mutex:
> + mutex_unlock(&nvmem_mutex);
> +
> + return ret;
> +}
> +
> #else /* CONFIG_NVMEM_SYSFS */
>
> static int nvmem_sysfs_setup_compat(struct nvmem_device *nvmem,
> @@ -976,16 +1090,22 @@ struct nvmem_device *nvmem_register(const struct nvmem_config *config)
> if (rval)
> goto err_remove_cells;
>
> + rval = nvmem_add_cells_from_layout(nvmem);
> + if (rval)
> + goto err_remove_cells;
> +
> +#ifdef CONFIG_NVMEM_SYSFS
> + rval = nvmem_populate_sysfs_cells(nvmem);
> + if (rval)
> + goto err_remove_cells;
> +#endif
> +
> dev_dbg(&nvmem->dev, "Registering nvmem device %s\n", config->name);
>
> rval = device_add(&nvmem->dev);
> if (rval)
> goto err_remove_cells;
>
> - rval = nvmem_add_cells_from_layout(nvmem);
> - if (rval)
> - goto err_remove_cells;
> -
> blocking_notifier_call_chain(&nvmem_notifier, NVMEM_ADD, nvmem);
>
> return nvmem;

2023-06-09 16:18:44

by Miquel Raynal

[permalink] [raw]

Subject: Re: [PATCH v3 4/4] nvmem: core: Expose cells through sysfs

Hi Srinivas,

[email protected] wrote on Tue, 6 Jun 2023 11:31:07 +0100:

> Thanks for doing this Miquel

Great, I'm glad you like the idea :)

>
> Few minor comments below.
>
> On 05/06/2023 14:34, Miquel Raynal wrote:
> > The binary content of nvmem devices is available to the user so in the
> > easiest cases, finding the content of a cell is rather easy as it is
> > just a matter of looking at a known and fixed offset. However, nvmem
> > layouts have been recently introduced to cope with more advanced
> > situations, where the offset and size of the cells is not known in
> > advance or is dynamic. When using layouts, more advanced parsers are
> > used by the kernel in order to give direct access to the content of each
> > cell, regardless of its position/size in the underlying
> > device. Unfortunately, these information are not accessible by users,
> > unless by fully re-implementing the parser logic in userland.
> >
> > Let's expose the cells and their content through sysfs to avoid these
> > situations. Of course the relevant NVMEM sysfs Kconfig option must be
> > enabled for this support to be available.
> >
> > Not all nvmem devices expose cells. Indeed, the .bin_attrs attribute
> > group member will be filled at runtime only when relevant and will
> > remain empty otherwise. In this case, as the cells attribute group will
> > be empty, it will not lead to any additional folder/file creation.
> >
> > Exposed cells are read-only. There is, in practice, everything in the
> > core to support a write path, but as I don't see any need for that, I
> > prefer to keep the interface simple (and probably safer). The interface
> > is documented as being in the "testing" state which means we can later
> > add a write attribute if though relevant.
> >
> > There is one limitation though: if a layout is built as a module but is
> > not properly installed in the system and loaded manually with insmod
> > while the nvmem device driver was built-in, the cells won't appear in
> > sysfs. But if done like that, the cells won't be usable by the built-in
> > kernel drivers anyway.
> >
> > Signed-off-by: Miquel Raynal <[email protected]>
> > ---
> > drivers/nvmem/core.c | 128 +++++++++++++++++++++++++++++++++++++++++--
> > 1 file changed, 124 insertions(+), 4 deletions(-)
> >
> > diff --git a/drivers/nvmem/core.c b/drivers/nvmem/core.c
> > index 342cd380b420..625e3de273b7 100644
> > --- a/drivers/nvmem/core.c
> > +++ b/drivers/nvmem/core.c
> > @@ -325,6 +325,61 @@ static umode_t nvmem_bin_attr_is_visible(struct kobject *kobj,
> > return nvmem_bin_attr_get_umode(nvmem);
> > }
> > > +static struct nvmem_cell *nvmem_create_cell(struct nvmem_cell_entry *entry,
> > + const char *id, int index);
> > +
> > +static ssize_t nvmem_cell_attr_read(struct file *filp, struct kobject *kobj,
> > + struct bin_attribute *attr, char *buf,
> > + loff_t pos, size_t count)
> > +{
> > + struct nvmem_cell_entry *entry;
> > + struct nvmem_cell *cell = NULL;
> > + struct nvmem_device *nvmem;
> > + size_t cell_sz, read_len;
> > + struct device *dev;
> > + void *content;
> > +
> > + if (attr->private)
> > + dev = attr->private;
> I see no point in this, as we do not set any private data for this attribute.
>
> How about storing nvmem_cell_entry in private and using it here.
> This should also avoid looping for every cell in the follow on code.

Mmmh, excellent idea, that will simplify a lot the helper, I'll do
that, thanks a lot for the suggestion!

>
> > + else
> > + dev = kobj_to_dev(kobj);
>
> new line here.
>
> > + nvmem = to_nvmem_device(dev);
> > +
> > + mutex_lock(&nvmem_mutex);
> > + list_for_each_entry(entry, &nvmem->cells, node) {
> > + if (strncmp(entry->name, attr->attr.name, XATTR_NAME_MAX))
> > + continue;
> > +
> > + cell = nvmem_create_cell(entry, entry->name, 0);
>
> > + if (IS_ERR(cell)) {
> > + mutex_unlock(&nvmem_mutex);
> > + return PTR_ERR(cell);
> > + }
> > +
> > + break;
> > + }
> > + mutex_unlock(&nvmem_mutex);
> > +
> > + if (!cell)
> > + return -EINVAL;
> > +
> > + content = nvmem_cell_read(cell, &cell_sz);
> > + if (IS_ERR(content)) {
> > + read_len = PTR_ERR(content);
> > + goto destroy_cell;
> > + }
> > +
> > + read_len = min_t(unsigned int, cell_sz - pos, count); > + memcpy(buf, content + pos, read_len);
> > + kfree(content);
> > +
> > +destroy_cell:
> > + kfree_const(cell->id);
> > + kfree(cell);
> > +
> > + return read_len;
> > +}
> > +
> > /* default read/write permissions */
> > static struct bin_attribute bin_attr_rw_nvmem = {
> > .attr = {
> > @@ -346,8 +401,14 @@ static const struct attribute_group nvmem_bin_group = {
> > .is_bin_visible = nvmem_bin_attr_is_visible,
> > };
> > > +/* Cell attributes will be dynamically allocated */
> > +static struct attribute_group nvmem_cells_group = {
> > + .name = "cells",
> > +};
> > +
> > static const struct attribute_group *nvmem_dev_groups[] = {
> > &nvmem_bin_group,
> > + &nvmem_cells_group,
> > NULL,
> > };
> > > @@ -406,6 +467,59 @@ static void nvmem_sysfs_remove_compat(struct nvmem_device *nvmem,
> > device_remove_bin_file(nvmem->base_dev, &nvmem->eeprom);
> > }
> > > +static int nvmem_populate_sysfs_cells(struct nvmem_device *nvmem)
> > +{
> > + struct bin_attribute **cells_attrs, *attrs;
> > + struct nvmem_cell_entry *entry;
> > + unsigned int ncells = 0, i = 0;
> > + int ret = 0;
> > +
> > + mutex_lock(&nvmem_mutex);
> > +
> > + if (list_empty(&nvmem->cells))
> > + goto unlock_mutex;
> > +
> > + list_for_each_entry(entry, &nvmem->cells, node)
> > + ncells++;
>
> list_count_nodes?

I didn't even know about this macro. Of course I'll use it!

> > +
> > + /* Allocate an array of attributes with a sentinel */
> > + cells_attrs = devm_kcalloc(&nvmem->dev, ncells + 1,
> > + sizeof(struct bin_attribute *), GFP_KERNEL);
> > + if (!cells_attrs) {
> > + ret = -ENOMEM;
> > + goto unlock_mutex;
> > + }
> > +
> > + attrs = devm_kcalloc(&nvmem->dev, ncells, sizeof(struct bin_attribute), GFP_KERNEL);
> > + if (!attrs) {
> > + ret = -ENOMEM;
> > + goto unlock_mutex;
> > + }
> > +
> > + /* Initialize each attribute to take the name and size of the cell */
> > + list_for_each_entry(entry, &nvmem->cells, node) {
> > + sysfs_bin_attr_init(&attrs[i]);
> > + attrs[i].attr.name = devm_kstrdup(&nvmem->dev, entry->name, GFP_KERNEL);
> > + attrs[i].attr.mode = 0444;
> > + attrs[i].size = entry->bytes;
> > + attrs[i].read = &nvmem_cell_attr_read;
> > + if (!attrs[i].attr.name) {
> > + ret = -ENOMEM;
> > + goto unlock_mutex;
> > + }
> > +
> > + cells_attrs[i] = &attrs[i];
> > + i++;
> > + }
> > +
> > + nvmem_cells_group.bin_attrs = cells_attrs;
> > +
> > +unlock_mutex:
> > + mutex_unlock(&nvmem_mutex);
> > +
> > + return ret;
> > +}
> > +
> > #else /* CONFIG_NVMEM_SYSFS */
> > > static int nvmem_sysfs_setup_compat(struct nvmem_device *nvmem,
> > @@ -976,16 +1090,22 @@ struct nvmem_device *nvmem_register(const struct nvmem_config *config)
> > if (rval)
> > goto err_remove_cells;
> > > + rval = nvmem_add_cells_from_layout(nvmem);
> > + if (rval)
> > + goto err_remove_cells;
> > +
> > +#ifdef CONFIG_NVMEM_SYSFS
> > + rval = nvmem_populate_sysfs_cells(nvmem);
> > + if (rval)
> > + goto err_remove_cells;
> > +#endif
> > +
> > dev_dbg(&nvmem->dev, "Registering nvmem device %s\n", config->name);
> > > rval = device_add(&nvmem->dev);
> > if (rval)
> > goto err_remove_cells;
> > > - rval = nvmem_add_cells_from_layout(nvmem);
> > - if (rval)
> > - goto err_remove_cells;
> > -
> > blocking_notifier_call_chain(&nvmem_notifier, NVMEM_ADD, nvmem);
> > > return nvmem;

Thanks,
Miquèl