Move the eeprom WP GPIO mux configuration to be part of the eeprom node
instead of the I2C node.
Cc: Robert Nelson <[email protected]>
Suggested-by: Udit Kumar <[email protected]>
Signed-off-by: Nishanth Menon <[email protected]>
---
New Patch
arch/arm64/boot/dts/ti/k3-j721e-beagleboneai64.dts | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-beagleboneai64.dts b/arch/arm64/boot/dts/ti/k3-j721e-beagleboneai64.dts
index 1a65d3617a29..a3f602e4fb45 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-beagleboneai64.dts
+++ b/arch/arm64/boot/dts/ti/k3-j721e-beagleboneai64.dts
@@ -639,12 +639,14 @@ &main_i2c6 {
&wkup_i2c0 {
status = "okay";
pinctrl-names = "default";
- pinctrl-0 = <&wkup_i2c0_pins_default &eeprom_wp_pins_default>;
+ pinctrl-0 = <&wkup_i2c0_pins_default>;
clock-frequency = <400000>;
eeprom@50 {
compatible = "atmel,24c04";
reg = <0x50>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&eeprom_wp_pins_default>;
};
};
--
2.40.0