This series brings fixes to the GPIO buttons, adds gpio-line-names and
introduces the SLG51000 camera on Xperia Edo devices.
Signed-off-by: Konrad Dybcio <[email protected]>
---
Changes in v2:
- Fix the Fixes tag in patch 4
- Pick up tags
- Link to v1: https://lore.kernel.org/r/[email protected]
---
Konrad Dybcio (4):
arm64: dts: qcom: sm8250-edo: Add gpio line names for TLMM
arm64: dts: qcom: sm8250-edo: Add GPIO line names for PMIC GPIOs
arm64: dts: qcom: sm8250-pdx203: Configure SLG51000 PMIC
arm64: dts: qcom: sm8250-edo: Rectify gpio-keys
.../dts/qcom/sm8250-sony-xperia-edo-pdx203.dts | 364 +++++++++++++++++++++
.../dts/qcom/sm8250-sony-xperia-edo-pdx206.dts | 243 ++++++++++++++
.../boot/dts/qcom/sm8250-sony-xperia-edo.dtsi | 61 +++-
3 files changed, 655 insertions(+), 13 deletions(-)
---
base-commit: 9dbf40840551df336c95ce2a3adbdd25ed53c0ef
change-id: 20230614-topic-edo_pinsgpiopmic-df8bd6f1b6db
Best regards,
--
Konrad Dybcio <[email protected]>
Sony ever so graciously provides GPIO line names in their downstream
kernel (though sometimes they are not 100% accurate and you can judge
that by simply looking at them and with what drivers they are used).
Add these to the PDX203&206 DTSIs to better document the hardware.
Diff between 203 and 206:
pm8009_gpios
< "CAM_PWR_LD_EN",
> "NC",
pm8150_gpios
< "NC",
> "G_ASSIST_N",
< "WLC_EN_N", /* GPIO_10 */
> "NC", /* GPIO_10 */
Which is due to 5 II having an additional Google Assistant hardware
button and 1 II having a wireless charger & different camera wiring
to accommodate the additional 3D iToF sensor.
Signed-off-by: Konrad Dybcio <[email protected]>
---
.../dts/qcom/sm8250-sony-xperia-edo-pdx203.dts | 50 ++++++++++++++++++++++
.../dts/qcom/sm8250-sony-xperia-edo-pdx206.dts | 50 ++++++++++++++++++++++
2 files changed, 100 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx203.dts b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx203.dts
index 84104d2b2010..62590c6bd306 100644
--- a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx203.dts
+++ b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx203.dts
@@ -15,6 +15,56 @@ / {
/delete-node/ &vreg_l7f_1p8;
+&pm8009_gpios {
+ gpio-line-names = "NC", /* GPIO_1 */
+ "CAM_PWR_LD_EN",
+ "WIDEC_PWR_EN",
+ "NC";
+};
+
+&pm8150_gpios {
+ gpio-line-names = "VOL_DOWN_N", /* GPIO_1 */
+ "OPTION_2",
+ "NC",
+ "PM_SLP_CLK_IN",
+ "OPTION_1",
+ "NC",
+ "NC",
+ "SP_ARI_PWR_ALARM",
+ "NC",
+ "NC"; /* GPIO_10 */
+};
+
+&pm8150b_gpios {
+ gpio-line-names = "SNAPSHOT_N", /* GPIO_1 */
+ "FOCUS_N",
+ "NC",
+ "NC",
+ "RF_LCD_ID_EN",
+ "NC",
+ "NC",
+ "LCD_ID",
+ "NC",
+ "WLC_EN_N", /* GPIO_10 */
+ "NC",
+ "RF_ID";
+};
+
+&pm8150l_gpios {
+ gpio-line-names = "NC", /* GPIO_1 */
+ "PM3003A_EN",
+ "NC",
+ "NC",
+ "NC",
+ "AUX2_THERM",
+ "BB_HP_EN",
+ "FP_LDO_EN",
+ "PMX_RESET_N",
+ "AUX3_THERM", /* GPIO_10 */
+ "DTV_PWR_EN",
+ "PM3003A_MODE";
+};
+
&tlmm {
gpio-line-names = "AP_CTI_IN", /* GPIO_0 */
"MDM2AP_ERR_FATAL",
diff --git a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx206.dts b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx206.dts
index fae6568cb79e..ea4571bf4fbf 100644
--- a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx206.dts
+++ b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx206.dts
@@ -30,6 +30,56 @@ g-assist-key {
};
};
+&pm8009_gpios {
+ gpio-line-names = "NC", /* GPIO_1 */
+ "NC",
+ "WIDEC_PWR_EN",
+ "NC";
+};
+
+&pm8150_gpios {
+ gpio-line-names = "VOL_DOWN_N", /* GPIO_1 */
+ "OPTION_2",
+ "NC",
+ "PM_SLP_CLK_IN",
+ "OPTION_1",
+ "G_ASSIST_N",
+ "NC",
+ "SP_ARI_PWR_ALARM",
+ "NC",
+ "NC"; /* GPIO_10 */
+};
+
+&pm8150b_gpios {
+ gpio-line-names = "SNAPSHOT_N", /* GPIO_1 */
+ "FOCUS_N",
+ "NC",
+ "NC",
+ "RF_LCD_ID_EN",
+ "NC",
+ "NC",
+ "LCD_ID",
+ "NC",
+ "NC", /* GPIO_10 */
+ "NC",
+ "RF_ID";
+};
+
+&pm8150l_gpios {
+ gpio-line-names = "NC", /* GPIO_1 */
+ "PM3003A_EN",
+ "NC",
+ "NC",
+ "NC",
+ "AUX2_THERM",
+ "BB_HP_EN",
+ "FP_LDO_EN",
+ "PMX_RESET_N",
+ "NC", /* GPIO_10 */
+ "NC",
+ "PM3003A_MODE";
+};
+
&tlmm {
gpio-line-names = "AP_CTI_IN", /* GPIO_0 */
"MDM2AP_ERR_FATAL",
--
2.41.0
Set up the corresponding GPIOs properly and add the leftover hardware
buttons to mark this piece of the puzzle complete.
Fixes: 46e14907c716 ("arm64: dts: qcom: sm8250-edo: Add hardware keys")
Reviewed-by: Marijn Suijten <[email protected]>
Signed-off-by: Konrad Dybcio <[email protected]>
---
.../dts/qcom/sm8250-sony-xperia-edo-pdx206.dts | 10 ++++
.../boot/dts/qcom/sm8250-sony-xperia-edo.dtsi | 54 +++++++++++++++++++---
2 files changed, 58 insertions(+), 6 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx206.dts b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx206.dts
index ea4571bf4fbf..58a521046f5f 100644
--- a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx206.dts
+++ b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx206.dts
@@ -20,6 +20,8 @@ &framebuffer {
};
&gpio_keys {
+ pinctrl-0 = <&focus_n &snapshot_n &vol_down_n &g_assist_n>;
+
g-assist-key {
label = "Google Assistant Key";
linux,code = <KEY_LEFTMETA>;
@@ -48,6 +50,14 @@ &pm8150_gpios {
"SP_ARI_PWR_ALARM",
"NC",
"NC"; /* GPIO_10 */
+
+ g_assist_n: g-assist-n-state {
+ pins = "gpio6";
+ function = "normal";
+ power-source = <1>;
+ bias-pull-up;
+ input-enable;
+ };
};
&pm8150b_gpios {
diff --git a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi
index 70da10fb9d9d..897b97db819e 100644
--- a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi
@@ -51,12 +51,26 @@ framebuffer: framebuffer@9c000000 {
gpio_keys: gpio-keys {
compatible = "gpio-keys";
- /*
- * Camera focus (light press) and camera snapshot (full press)
- * seem not to work properly.. Adding the former one stalls the CPU
- * and the latter kills the volume down key for whatever reason. In any
- * case, they are both on &pm8150b_gpios: camera focus(2), camera snapshot(1).
- */
+ pinctrl-0 = <&focus_n &snapshot_n &vol_down_n>;
+ pinctrl-names = "default";
+
+ key-camera-focus {
+ label = "Camera Focus";
+ linux,code = <KEY_CAMERA_FOCUS>;
+ gpios = <&pm8150b_gpios 2 GPIO_ACTIVE_LOW>;
+ debounce-interval = <15>;
+ linux,can-disable;
+ gpio-key,wakeup;
+ };
+
+ key-camera-snapshot {
+ label = "Camera Snapshot";
+ linux,code = <KEY_CAMERA>;
+ gpios = <&pm8150b_gpios 1 GPIO_ACTIVE_LOW>;
+ debounce-interval = <15>;
+ linux,can-disable;
+ gpio-key,wakeup;
+ };
key-vol-down {
label = "Volume Down";
@@ -544,6 +558,34 @@ &pcie2_phy {
vdda-pll-supply = <&vreg_l9a_1p2>;
};
+&pm8150_gpios {
+ vol_down_n: vol-down-n-state {
+ pins = "gpio1";
+ function = "normal";
+ power-source = <0>;
+ bias-pull-up;
+ input-enable;
+ };
+};
+
+&pm8150b_gpios {
+ snapshot_n: snapshot-n-state {
+ pins = "gpio1";
+ function = "normal";
+ power-source = <0>;
+ bias-pull-up;
+ input-enable;
+ };
+
+ focus_n: focus-n-state {
+ pins = "gpio2";
+ function = "normal";
+ power-source = <0>;
+ bias-pull-up;
+ input-enable;
+ };
+};
+
&pon_pwrkey {
status = "okay";
};
--
2.41.0
Sony ever so graciously provides GPIO line names in their downstream
kernel (though sometimes they are not 100% accurate and you can judge
that by simply looking at them and with what drivers they are used).
Add these to the PDX203&206 DTSIs to better document the hardware.
Diff between 203 and 206:
< "CAM_PWR_A_CS",
> "FRONTC_PWR_EN",
< "CAM4_MCLK",
< "TOF_RST_N",
> "NC",
> "NC",
< "WLC_I2C_SDA",
< "WLC_I2C_SCL", /* GPIO_120 */
> "NC",
> "NC",
< "WLC_INT_N",
> "NC",
Which makes sense, as 203 has a 3D iToF, slightly different camera
power wiring and WLC (WireLess Charging).
Signed-off-by: Konrad Dybcio <[email protected]>
---
.../dts/qcom/sm8250-sony-xperia-edo-pdx203.dts | 183 +++++++++++++++++++++
.../dts/qcom/sm8250-sony-xperia-edo-pdx206.dts | 183 +++++++++++++++++++++
2 files changed, 366 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx203.dts b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx203.dts
index 356a81698731..84104d2b2010 100644
--- a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx203.dts
+++ b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx203.dts
@@ -14,3 +14,186 @@ / {
};
/delete-node/ &vreg_l7f_1p8;
+
+&tlmm {
+ gpio-line-names = "AP_CTI_IN", /* GPIO_0 */
+ "MDM2AP_ERR_FATAL",
+ "AP_CTI_OUT",
+ "MDM2AP_STATUS",
+ "NFC_I2C_SDA",
+ "NFC_I2C_SCL",
+ "NFC_EN",
+ "NFC_CLK_REQ",
+ "NFC_ESE_PWR_REQ",
+ "DVDT_WRT_DET_AND",
+ "SPK_AMP_RESET_N", /* GPIO_10 */
+ "SPK_AMP_INT_N",
+ "APPS_I2C_1_SDA",
+ "APPS_I2C_1_SCL",
+ "NC",
+ "TX_GTR_THRES_IN",
+ "HST_BT_UART_CTS",
+ "HST_BT_UART_RFR",
+ "HST_BT_UART_TX",
+ "HST_BT_UART_RX",
+ "HST_WLAN_EN", /* GPIO_20 */
+ "HST_BT_EN",
+ "RGBC_IR_PWR_EN",
+ "FP_INT_N",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NFC_ESE_SPI_MISO",
+ "NFC_ESE_SPI_MOSI",
+ "NFC_ESE_SPI_SCLK", /* GPIO_30 */
+ "NFC_ESE_SPI_CS_N",
+ "WCD_RST_N",
+ "NC",
+ "SDM_DEBUG_UART_TX",
+ "SDM_DEBUG_UART_RX",
+ "TS_I2C_SDA",
+ "TS_I2C_SCL",
+ "TS_INT_N",
+ "FP_SPI_MISO", /* GPIO_40 */
+ "FP_SPI_MOSI",
+ "FP_SPI_SCLK",
+ "FP_SPI_CS_N",
+ "APPS_I2C_0_SDA",
+ "APPS_I2C_0_SCL",
+ "DISP_ERR_FG",
+ "UIM2_DETECT_EN",
+ "NC",
+ "NC",
+ "NC", /* GPIO_50 */
+ "NC",
+ "MDM_UART_CTS",
+ "MDM_UART_RFR",
+ "MDM_UART_TX",
+ "MDM_UART_RX",
+ "AP2MDM_STATUS",
+ "AP2MDM_ERR_FATAL",
+ "MDM_IPC_HS_UART_TX",
+ "MDM_IPC_HS_UART_RX",
+ "NC", /* GPIO_60 */
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "USB_CC_DIR",
+ "DISP_VSYNC",
+ "NC",
+ "NC",
+ "CAM_PWR_B_CS",
+ "NC", /* GPIO_70 */
+ "CAM_PWR_A_CS",
+ "SBU_SW_SEL",
+ "SBU_SW_OE",
+ "FP_RESET_N",
+ "FP_RESET_N",
+ "DISP_RESET_N",
+ "DEBUG_GPIO0",
+ "TRAY_DET",
+ "CAM2_RST_N",
+ "PCIE0_RST_N",
+ "PCIE0_CLK_REQ_N", /* GPIO_80 */
+ "PCIE0_WAKE_N",
+ "DVDT_ENABLE",
+ "DVDT_WRT_DET_OR",
+ "NC",
+ "PCIE2_RST_N",
+ "PCIE2_CLK_REQ_N",
+ "PCIE2_WAKE_N",
+ "MDM_VFR_IRQ0",
+ "MDM_VFR_IRQ1",
+ "SW_SERVICE", /* GPIO_90 */
+ "CAM_SOF",
+ "CAM1_RST_N",
+ "CAM0_RST_N",
+ "CAM0_MCLK",
+ "CAM1_MCLK",
+ "CAM2_MCLK",
+ "CAM3_MCLK",
+ "CAM4_MCLK",
+ "TOF_RST_N",
+ "NC", /* GPIO_100 */
+ "CCI0_I2C_SDA",
+ "CCI0_I2C_SCL",
+ "CCI1_I2C_SDA",
+ "CCI1_I2C_SCL_",
+ "CCI2_I2C_SDA",
+ "CCI2_I2C_SCL",
+ "CCI3_I2C_SDA",
+ "CCI3_I2C_SCL",
+ "CAM3_RST_N",
+ "NFC_DWL_REQ", /* GPIO_110 */
+ "NFC_IRQ",
+ "XVS",
+ "NC",
+ "RF_ID_EXTENSION",
+ "SPK_AMP_I2C_SDA",
+ "SPK_AMP_I2C_SCL",
+ "NC",
+ "NC",
+ "WLC_I2C_SDA",
+ "WLC_I2C_SCL", /* GPIO_120 */
+ "ACC_COVER_OPEN",
+ "ALS_PROX_INT_N",
+ "ACCEL_INT",
+ "WLAN_SW_CTRL",
+ "CAMSENSOR_I2C_SDA",
+ "CAMSENSOR_I2C_SCL",
+ "UDON_SWITCH_SEL",
+ "WDOG_DISABLE",
+ "BAROMETER_INT",
+ "NC", /* GPIO_130 */
+ "NC",
+ "FORCED_USB_BOOT",
+ "NC",
+ "NC",
+ "WLC_INT_N",
+ "NC",
+ "NC",
+ "RGBC_IR_INT",
+ "NC",
+ "NC", /* GPIO_140 */
+ "NC",
+ "BT_SLIMBUS_CLK",
+ "BT_SLIMBUS_DATA",
+ "HW_ID_0",
+ "HW_ID_1",
+ "WCD_SWR_TX_CLK",
+ "WCD_SWR_TX_DATA0",
+ "WCD_SWR_TX_DATA1",
+ "WCD_SWR_RX_CLK",
+ "WCD_SWR_RX_DATA0", /* GPIO_150 */
+ "WCD_SWR_RX_DATA1",
+ "SDM_DMIC_CLK1",
+ "SDM_DMIC_DATA1",
+ "SDM_DMIC_CLK2",
+ "SDM_DMIC_DATA2",
+ "SPK_AMP_I2S_CLK",
+ "SPK_AMP_I2S_WS",
+ "SPK_AMP_I2S_ASP_DIN",
+ "SPK_AMP_I2S_ASP_DOUT",
+ "COMPASS_I2C_SDA", /* GPIO_160 */
+ "COMPASS_I2C_SCL",
+ "NC",
+ "NC",
+ "SSC_SPI_1_MISO",
+ "SSC_SPI_1_MOSI",
+ "SSC_SPI_1_CLK",
+ "SSC_SPI_1_CS_N",
+ "NC",
+ "NC",
+ "SSC_SENSOR_I2C_SDA", /* GPIO_170 */
+ "SSC_SENSOR_I2C_SCL",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "HST_BLE_SNS_UART6_TX",
+ "HST_BLE_SNS_UART6_RX",
+ "HST_WLAN_UART_TX",
+ "HST_WLAN_UART_RX";
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx206.dts b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx206.dts
index 01fe3974ee72..fae6568cb79e 100644
--- a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx206.dts
+++ b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx206.dts
@@ -30,6 +30,189 @@ g-assist-key {
};
};
+&tlmm {
+ gpio-line-names = "AP_CTI_IN", /* GPIO_0 */
+ "MDM2AP_ERR_FATAL",
+ "AP_CTI_OUT",
+ "MDM2AP_STATUS",
+ "NFC_I2C_SDA",
+ "NFC_I2C_SCL",
+ "NFC_EN",
+ "NFC_CLK_REQ",
+ "NFC_ESE_PWR_REQ",
+ "DVDT_WRT_DET_AND",
+ "SPK_AMP_RESET_N", /* GPIO_10 */
+ "SPK_AMP_INT_N",
+ "APPS_I2C_1_SDA",
+ "APPS_I2C_1_SCL",
+ "NC",
+ "TX_GTR_THRES_IN",
+ "HST_BT_UART_CTS",
+ "HST_BT_UART_RFR",
+ "HST_BT_UART_TX",
+ "HST_BT_UART_RX",
+ "HST_WLAN_EN", /* GPIO_20 */
+ "HST_BT_EN",
+ "RGBC_IR_PWR_EN",
+ "FP_INT_N",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NFC_ESE_SPI_MISO",
+ "NFC_ESE_SPI_MOSI",
+ "NFC_ESE_SPI_SCLK", /* GPIO_30 */
+ "NFC_ESE_SPI_CS_N",
+ "WCD_RST_N",
+ "NC",
+ "SDM_DEBUG_UART_TX",
+ "SDM_DEBUG_UART_RX",
+ "TS_I2C_SDA",
+ "TS_I2C_SCL",
+ "TS_INT_N",
+ "FP_SPI_MISO", /* GPIO_40 */
+ "FP_SPI_MOSI",
+ "FP_SPI_SCLK",
+ "FP_SPI_CS_N",
+ "APPS_I2C_0_SDA",
+ "APPS_I2C_0_SCL",
+ "DISP_ERR_FG",
+ "UIM2_DETECT_EN",
+ "NC",
+ "NC",
+ "NC", /* GPIO_50 */
+ "NC",
+ "MDM_UART_CTS",
+ "MDM_UART_RFR",
+ "MDM_UART_TX",
+ "MDM_UART_RX",
+ "AP2MDM_STATUS",
+ "AP2MDM_ERR_FATAL",
+ "MDM_IPC_HS_UART_TX",
+ "MDM_IPC_HS_UART_RX",
+ "NC", /* GPIO_60 */
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "USB_CC_DIR",
+ "DISP_VSYNC",
+ "NC",
+ "NC",
+ "CAM_PWR_B_CS",
+ "NC", /* GPIO_70 */
+ "FRONTC_PWR_EN",
+ "SBU_SW_SEL",
+ "SBU_SW_OE",
+ "FP_RESET_N",
+ "FP_RESET_N",
+ "DISP_RESET_N",
+ "DEBUG_GPIO0",
+ "TRAY_DET",
+ "CAM2_RST_N",
+ "PCIE0_RST_N",
+ "PCIE0_CLK_REQ_N", /* GPIO_80 */
+ "PCIE0_WAKE_N",
+ "DVDT_ENABLE",
+ "DVDT_WRT_DET_OR",
+ "NC",
+ "PCIE2_RST_N",
+ "PCIE2_CLK_REQ_N",
+ "PCIE2_WAKE_N",
+ "MDM_VFR_IRQ0",
+ "MDM_VFR_IRQ1",
+ "SW_SERVICE", /* GPIO_90 */
+ "CAM_SOF",
+ "CAM1_RST_N",
+ "CAM0_RST_N",
+ "CAM0_MCLK",
+ "CAM1_MCLK",
+ "CAM2_MCLK",
+ "CAM3_MCLK",
+ "NC",
+ "NC",
+ "NC", /* GPIO_100 */
+ "CCI0_I2C_SDA",
+ "CCI0_I2C_SCL",
+ "CCI1_I2C_SDA",
+ "CCI1_I2C_SCL_",
+ "CCI2_I2C_SDA",
+ "CCI2_I2C_SCL",
+ "CCI3_I2C_SDA",
+ "CCI3_I2C_SCL",
+ "CAM3_RST_N",
+ "NFC_DWL_REQ", /* GPIO_110 */
+ "NFC_IRQ",
+ "XVS",
+ "NC",
+ "RF_ID_EXTENSION",
+ "SPK_AMP_I2C_SDA",
+ "SPK_AMP_I2C_SCL",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "ACC_COVER_OPEN",
+ "ALS_PROX_INT_N",
+ "ACCEL_INT",
+ "WLAN_SW_CTRL",
+ "CAMSENSOR_I2C_SDA",
+ "CAMSENSOR_I2C_SCL",
+ "UDON_SWITCH_SEL",
+ "WDOG_DISABLE",
+ "BAROMETER_INT",
+ "NC", /* GPIO_130 */
+ "NC",
+ "FORCED_USB_BOOT",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "RGBC_IR_INT",
+ "NC",
+ "NC", /* GPIO_140 */
+ "NC",
+ "BT_SLIMBUS_CLK",
+ "BT_SLIMBUS_DATA",
+ "HW_ID_0",
+ "HW_ID_1",
+ "WCD_SWR_TX_CLK",
+ "WCD_SWR_TX_DATA0",
+ "WCD_SWR_TX_DATA1",
+ "WCD_SWR_RX_CLK",
+ "WCD_SWR_RX_DATA0", /* GPIO_150 */
+ "WCD_SWR_RX_DATA1",
+ "SDM_DMIC_CLK1",
+ "SDM_DMIC_DATA1",
+ "SDM_DMIC_CLK2",
+ "SDM_DMIC_DATA2",
+ "SPK_AMP_I2S_CLK",
+ "SPK_AMP_I2S_WS",
+ "SPK_AMP_I2S_ASP_DIN",
+ "SPK_AMP_I2S_ASP_DOUT",
+ "COMPASS_I2C_SDA", /* GPIO_160 */
+ "COMPASS_I2C_SCL",
+ "NC",
+ "NC",
+ "SSC_SPI_1_MISO",
+ "SSC_SPI_1_MOSI",
+ "SSC_SPI_1_CLK",
+ "SSC_SPI_1_CS_N",
+ "NC",
+ "NC",
+ "SSC_SENSOR_I2C_SDA", /* GPIO_170 */
+ "SSC_SENSOR_I2C_SCL",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "HST_BLE_SNS_UART6_TX",
+ "HST_BLE_SNS_UART6_RX",
+ "HST_WLAN_UART_TX",
+ "HST_WLAN_UART_RX";
+};
+
&vreg_l2f_1p3 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
--
2.41.0
Xperia 1 II / PRO use the Dialog SLG51000 PMIC for powering some camera
sensors. Add the required nodes to support it and remove its remnants
from -edo.dtsi, as it's absent on 5 II.
Signed-off-by: Konrad Dybcio <[email protected]>
---
.../dts/qcom/sm8250-sony-xperia-edo-pdx203.dts | 131 +++++++++++++++++++++
.../boot/dts/qcom/sm8250-sony-xperia-edo.dtsi | 7 --
2 files changed, 131 insertions(+), 7 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx203.dts b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx203.dts
index 62590c6bd306..f4c4575eb03b 100644
--- a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx203.dts
+++ b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx203.dts
@@ -15,6 +15,123 @@ / {
/delete-node/ &vreg_l7f_1p8;
+&i2c5 {
+ clock-frequency = <400000>;
+ status = "okay";
+
+ pmic@75 {
+ compatible = "dlg,slg51000";
+ reg = <0x75>;
+ dlg,cs-gpios = <&tlmm 69 GPIO_ACTIVE_HIGH>;
+ vin5-supply = <&vreg_s1f_1p2>;
+ vin6-supply = <&vreg_s1f_1p2>;
+
+ pinctrl-0 = <&cam_pwr_b_cs>;
+ pinctrl-names = "default";
+
+ regulators {
+ slg51000_1_ldo1: ldo1 {
+ regulator-name = "slg51000_b_ldo1";
+ regulator-min-microvolt = <2400000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ slg51000_1_ldo2: ldo2 {
+ regulator-name = "slg51000_b_ldo2";
+ regulator-min-microvolt = <2400000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ slg51000_1_ldo3: ldo3 {
+ regulator-name = "slg51000_b_ldo3";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3750000>;
+ };
+
+ slg51000_1_ldo4: ldo4 {
+ regulator-name = "slg51000_b_ldo4";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3750000>;
+ };
+
+ slg51000_1_ldo5: ldo5 {
+ regulator-name = "slg51000_b_ldo5";
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ slg51000_1_ldo6: ldo6 {
+ regulator-name = "slg51000_b_ldo6";
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ slg51000_1_ldo7: ldo7 {
+ regulator-name = "slg51000_b_ldo7";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3750000>;
+ };
+ };
+ };
+};
+
+&i2c15 {
+ pmic@75 {
+ compatible = "dlg,slg51000";
+ reg = <0x75>;
+ dlg,cs-gpios = <&tlmm 71 GPIO_ACTIVE_HIGH>;
+ vin5-supply = <&vreg_l2f_1p3>;
+ vin6-supply = <&vreg_l2f_1p3>;
+
+ pinctrl-0 = <&cam_pwr_a_cs>;
+ pinctrl-names = "default";
+
+ regulators {
+ slg51000_0_ldo1: ldo1 {
+ regulator-name = "slg51000_a_ldo1";
+ regulator-min-microvolt = <2400000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ slg51000_0_ldo2: ldo2 {
+ regulator-name = "slg51000_a_ldo2";
+ regulator-min-microvolt = <2400000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ slg51000_0_ldo3: ldo3 {
+ regulator-name = "slg51000_a_ldo3";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3750000>;
+ };
+
+ slg51000_0_ldo4: ldo4 {
+ regulator-name = "slg51000_a_ldo4";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3750000>;
+ };
+
+ slg51000_0_ldo5: ldo5 {
+ regulator-name = "slg51000_a_ldo5";
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ slg51000_0_ldo6: ldo6 {
+ regulator-name = "slg51000_a_ldo6";
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ slg51000_0_ldo7: ldo7 {
+ regulator-name = "slg51000_a_ldo7";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3750000>;
+ };
+ };
+ };
+};
+
&pm8009_gpios {
gpio-line-names = "NC", /* GPIO_1 */
"CAM_PWR_LD_EN",
@@ -246,4 +363,18 @@ &tlmm {
"HST_BLE_SNS_UART6_RX",
"HST_WLAN_UART_TX",
"HST_WLAN_UART_RX";
+
+ cam_pwr_b_cs: cam-pwr-b-state {
+ pins = "gpio69";
+ drive-strength = <2>;
+ bias-disable;
+ output-low;
+ };
+
+ cam_pwr_a_cs: cam-pwr-a-state {
+ pins = "gpio71";
+ drive-strength = <2>;
+ bias-disable;
+ output-low;
+ };
};
diff --git a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi
index 8ab82bacba81..70da10fb9d9d 100644
--- a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi
@@ -486,13 +486,6 @@ cs35l41_r: speaker-amp@41 {
};
};
-&i2c5 {
- status = "okay";
- clock-frequency = <400000>;
-
- /* Dialog SLG51000 CMIC @ 75 */
-};
-
&i2c9 {
status = "okay";
clock-frequency = <400000>;
--
2.41.0
On Tue, 20 Jun 2023 13:05:33 +0200, Konrad Dybcio wrote:
> This series brings fixes to the GPIO buttons, adds gpio-line-names and
> introduces the SLG51000 camera on Xperia Edo devices.
>
>
Applied, thanks!
[1/4] arm64: dts: qcom: sm8250-edo: Add gpio line names for TLMM
commit: 40b398beabdfe0e9088b13976e56b1dc706fe851
[2/4] arm64: dts: qcom: sm8250-edo: Add GPIO line names for PMIC GPIOs
commit: 6b8a63350752c6a5e4b54f2de6174084652cd3cd
[3/4] arm64: dts: qcom: sm8250-pdx203: Configure SLG51000 PMIC
commit: 2de55db6bca0856ecbff5c288dc330af94c8e5b1
[4/4] arm64: dts: qcom: sm8250-edo: Rectify gpio-keys
commit: a422c6a91a667b309ca1a6c08b30dbfcf7d4e866
Best regards,
--
Bjorn Andersson <[email protected]>