When referring to array of phandles, using <> to separate the array
entries is better notation as it makes potential errors with phandle
and cell arguments easier to catch. Fix the outliers to be consistent
with the rest of the usage.
Cc: Wadim Egorov <[email protected]>
Fixes: 0ad58871f63c ("arm64: dts: ti: Add basic support for phyBOARD-Lyra-AM625")
Signed-off-by: Nishanth Menon <[email protected]>
---
Vignesh,
I missed in the review, just noticed. just cosmetic though, might be worthwhile to
pick or squash.
arch/arm64/boot/dts/ti/k3-am625-phyboard-lyra-rdk.dts | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/ti/k3-am625-phyboard-lyra-rdk.dts b/arch/arm64/boot/dts/ti/k3-am625-phyboard-lyra-rdk.dts
index 5024f1e38fc4..a438baf542c2 100644
--- a/arch/arm64/boot/dts/ti/k3-am625-phyboard-lyra-rdk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am625-phyboard-lyra-rdk.dts
@@ -57,7 +57,7 @@ key-menu {
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
- pinctrl-0 = <&leds_pins_default &user_leds_pins_default>;
+ pinctrl-0 = <&leds_pins_default>, <&user_leds_pins_default>;
led-1 {
gpios = <&main_gpio0 32 GPIO_ACTIVE_HIGH>;
@@ -167,8 +167,7 @@ AM62X_IOPAD(0x084, PIN_OUTPUT, 7) /* (L23) GPMC0_ADVn_ALE.GPIO0_32 */
&cpsw3g {
pinctrl-names = "default";
- pinctrl-0 = <&main_rgmii1_pins_default
- &main_rgmii2_pins_default>;
+ pinctrl-0 = <&main_rgmii1_pins_default>, <&main_rgmii2_pins_default>;
};
&cpsw_port2 {
--
2.40.0