DTS and driver already support pcie_clkreq function for a pin. Add it
to fix dtbs_check warning:
qcom-sdx65-mtp.dtb: pinctrl@f100000: pcie-ep-clkreq-default-state: 'oneOf' conditional failed, one must be fixed:
'bias-disable', 'drive-strength', 'function', 'pins' do not match any of the regexes: '-pins$', 'pinctrl-[0-9]+'
'pcie_clkreq' is not one of ['blsp_uart1', 'blsp_spi1', ... 'gpio']
Signed-off-by: Krzysztof Kozlowski <[email protected]>
---
Documentation/devicetree/bindings/pinctrl/qcom,sdx65-tlmm.yaml | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sdx65-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sdx65-tlmm.yaml
index 2ef793ae4038..27319782d94b 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,sdx65-tlmm.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sdx65-tlmm.yaml
@@ -85,7 +85,7 @@ $defs:
qdss_tracectl_a, dac_calib13, qdss_traceclk_a, dac_calib14,
dac_calib15, hdmi_rcv, dac_calib16, hdmi_cec, pwr_modem,
dac_calib17, hdmi_ddc, pwr_nav, dac_calib18, pwr_crypto,
- dac_calib19, hdmi_hot, dac_calib20, dac_calib21, pci_e0,
+ dac_calib19, hdmi_hot, dac_calib20, dac_calib21, pci_e0, pcie_clkreq,
dac_calib22, dac_calib23, dac_calib24, tsif1_sync, dac_calib25,
sd_write, tsif1_error, blsp_spi2, blsp_uart2, blsp_uim2,
qdss_cti, blsp_i2c2, blsp_spi3, blsp_uart3, blsp_uim3, blsp_i2c3,
--
2.34.1
On Sat, Jun 17, 2023 at 01:18:09PM +0200, Krzysztof Kozlowski wrote:
> DTS and driver already support pcie_clkreq function for a pin. Add it
> to fix dtbs_check warning:
>
> qcom-sdx65-mtp.dtb: pinctrl@f100000: pcie-ep-clkreq-default-state: 'oneOf' conditional failed, one must be fixed:
> 'bias-disable', 'drive-strength', 'function', 'pins' do not match any of the regexes: '-pins$', 'pinctrl-[0-9]+'
> 'pcie_clkreq' is not one of ['blsp_uart1', 'blsp_spi1', ... 'gpio']
>
> Signed-off-by: Krzysztof Kozlowski <[email protected]>
Acked-by: Conor Dooley <[email protected]>
Cheers,
Conor.
> ---
> Documentation/devicetree/bindings/pinctrl/qcom,sdx65-tlmm.yaml | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sdx65-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sdx65-tlmm.yaml
> index 2ef793ae4038..27319782d94b 100644
> --- a/Documentation/devicetree/bindings/pinctrl/qcom,sdx65-tlmm.yaml
> +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sdx65-tlmm.yaml
> @@ -85,7 +85,7 @@ $defs:
> qdss_tracectl_a, dac_calib13, qdss_traceclk_a, dac_calib14,
> dac_calib15, hdmi_rcv, dac_calib16, hdmi_cec, pwr_modem,
> dac_calib17, hdmi_ddc, pwr_nav, dac_calib18, pwr_crypto,
> - dac_calib19, hdmi_hot, dac_calib20, dac_calib21, pci_e0,
> + dac_calib19, hdmi_hot, dac_calib20, dac_calib21, pci_e0, pcie_clkreq,
> dac_calib22, dac_calib23, dac_calib24, tsif1_sync, dac_calib25,
> sd_write, tsif1_error, blsp_spi2, blsp_uart2, blsp_uim2,
> qdss_cti, blsp_i2c2, blsp_spi3, blsp_uart3, blsp_uim3, blsp_i2c3,
> --
> 2.34.1
>
On Sat, Jun 17, 2023 at 1:18 PM Krzysztof Kozlowski
<[email protected]> wrote:
> DTS and driver already support pcie_clkreq function for a pin. Add it
> to fix dtbs_check warning:
>
> qcom-sdx65-mtp.dtb: pinctrl@f100000: pcie-ep-clkreq-default-state: 'oneOf' conditional failed, one must be fixed:
> 'bias-disable', 'drive-strength', 'function', 'pins' do not match any of the regexes: '-pins$', 'pinctrl-[0-9]+'
> 'pcie_clkreq' is not one of ['blsp_uart1', 'blsp_spi1', ... 'gpio']
>
> Signed-off-by: Krzysztof Kozlowski <[email protected]>
Patch applied!
Yours,
Linus Walleij