Add the binding for the USB3.1 Genesys Logic GL3523 hub.
Signed-off-by: Marco Felsch <[email protected]>
---
Documentation/devicetree/bindings/usb/genesys,gl850g.yaml | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/usb/genesys,gl850g.yaml b/Documentation/devicetree/bindings/usb/genesys,gl850g.yaml
index cc4cf92b70d18..383625c2ef008 100644
--- a/Documentation/devicetree/bindings/usb/genesys,gl850g.yaml
+++ b/Documentation/devicetree/bindings/usb/genesys,gl850g.yaml
@@ -17,6 +17,7 @@ properties:
enum:
- usb5e3,608
- usb5e3,610
+ - usb5e3,620
reg: true
--
2.39.2
From: Anand Moon <[email protected]>
Genesys Logic GL3523 is a 4-port USB 3.1 hub that has a reset pin to
toggle and a 5.0V core supply exported though an integrated LDO is
available for powering it.
Add the support for this hub, for controlling the reset pin and the core
power supply.
Signed-off-by: Anand Moon <[email protected]>
[[email protected]: include review feedback & port to 6.4]
Signed-off-by: Marco Felsch <[email protected]>
---
drivers/usb/misc/onboard_usb_hub.c | 1 +
drivers/usb/misc/onboard_usb_hub.h | 1 +
2 files changed, 2 insertions(+)
diff --git a/drivers/usb/misc/onboard_usb_hub.c b/drivers/usb/misc/onboard_usb_hub.c
index 12fc6eb67c3bf..7aab04de9d847 100644
--- a/drivers/usb/misc/onboard_usb_hub.c
+++ b/drivers/usb/misc/onboard_usb_hub.c
@@ -409,6 +409,7 @@ static void onboard_hub_usbdev_disconnect(struct usb_device *udev)
static const struct usb_device_id onboard_hub_id_table[] = {
{ USB_DEVICE(VENDOR_ID_GENESYS, 0x0608) }, /* Genesys Logic GL850G USB 2.0 */
{ USB_DEVICE(VENDOR_ID_GENESYS, 0x0610) }, /* Genesys Logic GL852G USB 2.0 */
+ { USB_DEVICE(VENDOR_ID_GENESYS, 0x0620) }, /* Genesys Logic GL3523 USB 3.1 */
{ USB_DEVICE(VENDOR_ID_MICROCHIP, 0x2514) }, /* USB2514B USB 2.0 */
{ USB_DEVICE(VENDOR_ID_MICROCHIP, 0x2517) }, /* USB2517 USB 2.0 */
{ USB_DEVICE(VENDOR_ID_REALTEK, 0x0411) }, /* RTS5411 USB 3.1 */
diff --git a/drivers/usb/misc/onboard_usb_hub.h b/drivers/usb/misc/onboard_usb_hub.h
index aca5f50eb0da7..0134af1f9e42d 100644
--- a/drivers/usb/misc/onboard_usb_hub.h
+++ b/drivers/usb/misc/onboard_usb_hub.h
@@ -41,6 +41,7 @@ static const struct of_device_id onboard_hub_match[] = {
{ .compatible = "usb451,8142", .data = &ti_tusb8041_data, },
{ .compatible = "usb5e3,608", .data = &genesys_gl850g_data, },
{ .compatible = "usb5e3,610", .data = &genesys_gl852g_data, },
+ { .compatible = "usb5e3,620", .data = &genesys_gl852g_data, },
{ .compatible = "usbbda,411", .data = &realtek_rts5411_data, },
{ .compatible = "usbbda,5411", .data = &realtek_rts5411_data, },
{ .compatible = "usbbda,414", .data = &realtek_rts5411_data, },
--
2.39.2
On Fri, Jun 23, 2023 at 04:22:27PM +0200, Marco Felsch wrote:
> Add the binding for the USB3.1 Genesys Logic GL3523 hub.
>
> Signed-off-by: Marco Felsch <[email protected]>
Acked-by: Conor Dooley <[email protected]>
Cheers,
Conor.