According to CTA 861 the channel/speaker allocation info in the
audio infoframe only applies to uncompressed (PCM) audio streams.
The channel count info should indicate the number of channels
in the transmitted audio, which usually won't match the number of
channels used to transmit the compressed bitstream.
Some devices (eg some Sony TVs) will refuse to decode compressed
audio if these values are not set correctly.
To fix this we can simply set the channel count to 0 (which means
"refer to stream header") and set the channel/speaker allocation to 0
as well (which would mean stereo FL/FR for PCM, a safe value all sinks
will support) when transmitting compressed audio.
Signed-off-by: Matthias Reichl <[email protected]>
---
sound/soc/codecs/hdmi-codec.c | 36 +++++++++++++++++++++++------------
1 file changed, 24 insertions(+), 12 deletions(-)
diff --git a/sound/soc/codecs/hdmi-codec.c b/sound/soc/codecs/hdmi-codec.c
index 6d980fbc42077..d21f69f053422 100644
--- a/sound/soc/codecs/hdmi-codec.c
+++ b/sound/soc/codecs/hdmi-codec.c
@@ -495,31 +495,43 @@ static int hdmi_codec_fill_codec_params(struct snd_soc_dai *dai,
struct hdmi_codec_params *hp)
{
struct hdmi_codec_priv *hcp = snd_soc_dai_get_drvdata(dai);
- int idx;
-
- /* Select a channel allocation that matches with ELD and pcm channels */
- idx = hdmi_codec_get_ch_alloc_table_idx(hcp, channels);
- if (idx < 0) {
- dev_err(dai->dev, "Not able to map channels to speakers (%d)\n",
- idx);
- hcp->chmap_idx = HDMI_CODEC_CHMAP_IDX_UNKNOWN;
- return idx;
+ int idx = HDMI_CODEC_CHMAP_IDX_UNKNOWN;
+ u8 ca_id = 0;
+ bool pcm_audio = !(hcp->iec_status[0] & IEC958_AES0_NONAUDIO);
+
+ if (pcm_audio) {
+ /* Select a channel allocation that matches with ELD and pcm channels */
+ idx = hdmi_codec_get_ch_alloc_table_idx(hcp, channels);
+
+ if (idx < 0) {
+ dev_err(dai->dev, "Not able to map channels to speakers (%d)\n",
+ idx);
+ hcp->chmap_idx = HDMI_CODEC_CHMAP_IDX_UNKNOWN;
+ return idx;
+ }
+
+ ca_id = hdmi_codec_channel_alloc[idx].ca_id;
}
memset(hp, 0, sizeof(*hp));
hdmi_audio_infoframe_init(&hp->cea);
- hp->cea.channels = channels;
+
+ if (pcm_audio)
+ hp->cea.channels = channels;
+ else
+ hp->cea.channels = 0;
+
hp->cea.coding_type = HDMI_AUDIO_CODING_TYPE_STREAM;
hp->cea.sample_size = HDMI_AUDIO_SAMPLE_SIZE_STREAM;
hp->cea.sample_frequency = HDMI_AUDIO_SAMPLE_FREQUENCY_STREAM;
- hp->cea.channel_allocation = hdmi_codec_channel_alloc[idx].ca_id;
+ hp->cea.channel_allocation = ca_id;
hp->sample_width = sample_width;
hp->sample_rate = sample_rate;
hp->channels = channels;
- hcp->chmap_idx = hdmi_codec_channel_alloc[idx].ca_id;
+ hcp->chmap_idx = idx;
return 0;
}
--
2.39.2
On Sat, 24 Jun 2023 18:52:32 +0200,
Matthias Reichl wrote:
>
> According to CTA 861 the channel/speaker allocation info in the
> audio infoframe only applies to uncompressed (PCM) audio streams.
>
> The channel count info should indicate the number of channels
> in the transmitted audio, which usually won't match the number of
> channels used to transmit the compressed bitstream.
>
> Some devices (eg some Sony TVs) will refuse to decode compressed
> audio if these values are not set correctly.
>
> To fix this we can simply set the channel count to 0 (which means
> "refer to stream header") and set the channel/speaker allocation to 0
> as well (which would mean stereo FL/FR for PCM, a safe value all sinks
> will support) when transmitting compressed audio.
>
> Signed-off-by: Matthias Reichl <[email protected]>
Thanks, applied now.
Takashi
On Sat, 24 Jun 2023 18:52:32 +0200, Matthias Reichl wrote:
> According to CTA 861 the channel/speaker allocation info in the
> audio infoframe only applies to uncompressed (PCM) audio streams.
>
> The channel count info should indicate the number of channels
> in the transmitted audio, which usually won't match the number of
> channels used to transmit the compressed bitstream.
>
> [...]
Applied to
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next
Thanks!
[1/1] ASoC: hdmi-codec: fix channel info for compressed formats
commit: 7b5162080174ae50e8288574379d339b0fcd1760
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark
On Thu, Jun 29, 2023 at 12:44:31PM +0200, Takashi Iwai wrote:
> Mark Brown wrote:
> > Applied to
> > https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next
> Oh, I already applied this one together with another fix for HDMI,
> and it's in the ongoing PR to Linus. I didn't notice that it was
> ASoC-only. Sorry for confusion!
No worries, two copies won't hurt anything. I think it was already
running through my CI by the time you applied it and didn't seem worth
it to restart everything.
On Thu, 29 Jun 2023 12:33:33 +0200,
Mark Brown wrote:
>
> On Sat, 24 Jun 2023 18:52:32 +0200, Matthias Reichl wrote:
> > According to CTA 861 the channel/speaker allocation info in the
> > audio infoframe only applies to uncompressed (PCM) audio streams.
> >
> > The channel count info should indicate the number of channels
> > in the transmitted audio, which usually won't match the number of
> > channels used to transmit the compressed bitstream.
> >
> > [...]
>
> Applied to
>
> https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next
Oh, I already applied this one together with another fix for HDMI,
and it's in the ongoing PR to Linus. I didn't notice that it was
ASoC-only. Sorry for confusion!
Takashi