The config options for kexec and crash features are consolidated
into new file kernel/Kconfig.kexec. Under the "General Setup" submenu
is a new submenu "Kexec and crash handling". All the kexec and
crash options that were once in the arch-dependent submenu "Processor
type and features" are now consolidated in the new submenu.
The following options are impacted:
- KEXEC
- KEXEC_FILE
- KEXEC_SIG
- KEXEC_SIG_FORCE
- KEXEC_BZIMAGE_VERIFY_SIG
- KEXEC_JUMP
- CRASH_DUMP
The three main options are KEXEC, KEXEC_FILE and CRASH_DUMP.
Architectures specify support of certain KEXEC and CRASH features with
similarly named new ARCH_SUPPORTS_<option> config options.
Architectures can utilize the new ARCH_SELECTS_<option> config
options to specify additional components when <option> is enabled.
To summarize, the ARCH_SUPPORTS_<option> permits the <option> to be
enabled, and the ARCH_SELECTS_<option> handles side effects (ie.
select statements).
Signed-off-by: Eric DeVolder <[email protected]>
---
arch/Kconfig | 13 -----
init/Kconfig | 2 +
kernel/Kconfig.kexec | 110 +++++++++++++++++++++++++++++++++++++++++++
3 files changed, 112 insertions(+), 13 deletions(-)
create mode 100644 kernel/Kconfig.kexec
diff --git a/arch/Kconfig b/arch/Kconfig
index 205fd23e0cad..a37730679730 100644
--- a/arch/Kconfig
+++ b/arch/Kconfig
@@ -11,19 +11,6 @@ source "arch/$(SRCARCH)/Kconfig"
menu "General architecture-dependent options"
-config CRASH_CORE
- bool
-
-config KEXEC_CORE
- select CRASH_CORE
- bool
-
-config KEXEC_ELF
- bool
-
-config HAVE_IMA_KEXEC
- bool
-
config ARCH_HAS_SUBPAGE_FAULTS
bool
help
diff --git a/init/Kconfig b/init/Kconfig
index 32c24950c4ce..4424447e23a5 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -1917,6 +1917,8 @@ config BINDGEN_VERSION_TEXT
config TRACEPOINTS
bool
+source "kernel/Kconfig.kexec"
+
endmenu # General setup
source "arch/Kconfig"
diff --git a/kernel/Kconfig.kexec b/kernel/Kconfig.kexec
new file mode 100644
index 000000000000..5d576ddfd999
--- /dev/null
+++ b/kernel/Kconfig.kexec
@@ -0,0 +1,110 @@
+# SPDX-License-Identifier: GPL-2.0-only
+
+menu "Kexec and crash features"
+
+config CRASH_CORE
+ bool
+
+config KEXEC_CORE
+ select CRASH_CORE
+ bool
+
+config KEXEC_ELF
+ bool
+
+config HAVE_IMA_KEXEC
+ bool
+
+config KEXEC
+ bool "Enable kexec system call"
+ default ARCH_DEFAULT_KEXEC
+ depends on ARCH_SUPPORTS_KEXEC
+ select KEXEC_CORE
+ help
+ kexec is a system call that implements the ability to shutdown your
+ current kernel, and to start another kernel. It is like a reboot
+ but it is independent of the system firmware. And like a reboot
+ you can start any kernel with it, not just Linux.
+
+ The name comes from the similarity to the exec system call.
+
+ It is an ongoing process to be certain the hardware in a machine
+ is properly shutdown, so do not be surprised if this code does not
+ initially work for you. As of this writing the exact hardware
+ interface is strongly in flux, so no good recommendation can be
+ made.
+
+config KEXEC_FILE
+ bool "Enable kexec file based system call"
+ depends on ARCH_SUPPORTS_KEXEC_FILE
+ select KEXEC_CORE
+ help
+ This is new version of kexec system call. This system call is
+ file based and takes file descriptors as system call argument
+ for kernel and initramfs as opposed to list of segments as
+ accepted by kexec system call.
+
+config KEXEC_SIG
+ bool "Verify kernel signature during kexec_file_load() syscall"
+ depends on KEXEC_FILE
+ help
+ This option makes the kexec_file_load() syscall check for a valid
+ signature of the kernel image. The image can still be loaded without
+ a valid signature unless you also enable KEXEC_SIG_FORCE, though if
+ there's a signature that we can check, then it must be valid.
+
+ In addition to this option, you need to enable signature
+ verification for the corresponding kernel image type being
+ loaded in order for this to work.
+
+config KEXEC_SIG_FORCE
+ bool "Require a valid signature in kexec_file_load() syscall"
+ depends on KEXEC_SIG
+ help
+ This option makes kernel signature verification mandatory for
+ the kexec_file_load() syscall.
+
+config KEXEC_IMAGE_VERIFY_SIG
+ bool "Enable Image signature verification support"
+ default ARCH_DEFAULT_KEXEC_IMAGE_VERIFY_SIG
+ depends on KEXEC_SIG
+ depends on EFI && SIGNED_PE_FILE_VERIFICATION
+ help
+ Enable Image signature verification support.
+
+config KEXEC_BZIMAGE_VERIFY_SIG
+ bool "Enable bzImage signature verification support"
+ depends on KEXEC_SIG
+ depends on SIGNED_PE_FILE_VERIFICATION
+ select SYSTEM_TRUSTED_KEYRING
+ help
+ Enable bzImage signature verification support.
+
+config KEXEC_JUMP
+ bool "kexec jump"
+ depends on KEXEC && HIBERNATION
+ depends on ARCH_SUPPORTS_KEXEC_JUMP
+ help
+ Jump between original kernel and kexeced kernel and invoke
+ code in physical address mode via KEXEC
+
+config CRASH_DUMP
+ bool "kernel crash dumps"
+ depends on ARCH_SUPPORTS_CRASH_DUMP
+ select KEXEC_CORE
+ select CRASH_CORE
+ help
+ Generate crash dump after being started by kexec.
+ This should be normally only set in special crash dump kernels
+ which are loaded in the main kernel with kexec-tools into
+ a specially reserved region and then later executed after
+ a crash by kdump/kexec. The crash dump kernel must be compiled
+ to a memory address not used by the main kernel or BIOS using
+ PHYSICAL_START, or it must be built as a relocatable image
+ (CONFIG_RELOCATABLE=y).
+ For more details see Documentation/admin-guide/kdump/kdump.rst
+
+ For s390, this option also enables zfcpdump.
+ See also <file:Documentation/s390/zfcpdump.rst>
+
+endmenu
--
2.31.1
On Mon, Jun 26, 2023 at 12:13:20PM -0400, Eric DeVolder wrote:
> +config KEXEC
> + bool "Enable kexec system call"
> + default ARCH_DEFAULT_KEXEC
> + depends on ARCH_SUPPORTS_KEXEC
> + select KEXEC_CORE
> + help
> + kexec is a system call that implements the ability to shutdown your
> + current kernel, and to start another kernel. It is like a reboot
> + but it is independent of the system firmware. And like a reboot
> + you can start any kernel with it, not just Linux.
> +
> + The name comes from the similarity to the exec system call.
> +
> + It is an ongoing process to be certain the hardware in a machine
> + is properly shutdown, so do not be surprised if this code does not
> + initially work for you. As of this writing the exact hardware
> + interface is strongly in flux, so no good recommendation can be
> + made.
Is this last paragraph still true? Is the hardware interface still
"strongly in flux" ?
--
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 80Mbps down 10Mbps up. Decent connectivity at last!
On 6/26/23 11:19, Russell King (Oracle) wrote:
> On Mon, Jun 26, 2023 at 12:13:20PM -0400, Eric DeVolder wrote:
>> +config KEXEC
>> + bool "Enable kexec system call"
>> + default ARCH_DEFAULT_KEXEC
>> + depends on ARCH_SUPPORTS_KEXEC
>> + select KEXEC_CORE
>> + help
>> + kexec is a system call that implements the ability to shutdown your
>> + current kernel, and to start another kernel. It is like a reboot
>> + but it is independent of the system firmware. And like a reboot
>> + you can start any kernel with it, not just Linux.
>> +
>> + The name comes from the similarity to the exec system call.
>> +
>> + It is an ongoing process to be certain the hardware in a machine
>> + is properly shutdown, so do not be surprised if this code does not
>> + initially work for you. As of this writing the exact hardware
>> + interface is strongly in flux, so no good recommendation can be
>> + made.
>
> Is this last paragraph still true? Is the hardware interface still
> "strongly in flux" ?
>
Russell,
In short, I don't know. Specifically with respect to the verbage you point out, it was
present in most of the original Kconfig descriptions. Some archs are probably in better
shape than others, but overall I've always see people issue caution statements around
kexec/kdump.
$0.02
eric