2023-06-27 19:57:35

by Luca Weiss

Subject: [PATCH 1/2] ARM: dts: qcom: msm8974: replace incorrect indentation in interconnect

The clocks definition in the interconnect nodes should use tabs (+ 1
space) for indentation instead of 9 spaces. Fix that.

Signed-off-by: Luca Weiss <[email protected]>
---
arch/arm/boot/dts/qcom/qcom-msm8974.dtsi | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8974.dtsi
index aeca504918a0..c6475837eda3 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8974.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-msm8974.dtsi
@@ -1075,7 +1075,7 @@ bimc: interconnect@fc380000 {
#interconnect-cells = <1>;
clock-names = "bus", "bus_a";
clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
- <&rpmcc RPM_SMD_BIMC_A_CLK>;
+ <&rpmcc RPM_SMD_BIMC_A_CLK>;
};

snoc: interconnect@fc460000 {
@@ -1084,7 +1084,7 @@ snoc: interconnect@fc460000 {
#interconnect-cells = <1>;
clock-names = "bus", "bus_a";
clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
- <&rpmcc RPM_SMD_SNOC_A_CLK>;
+ <&rpmcc RPM_SMD_SNOC_A_CLK>;
};

pnoc: interconnect@fc468000 {
@@ -1093,7 +1093,7 @@ pnoc: interconnect@fc468000 {
#interconnect-cells = <1>;
clock-names = "bus", "bus_a";
clocks = <&rpmcc RPM_SMD_PNOC_CLK>,
- <&rpmcc RPM_SMD_PNOC_A_CLK>;
+ <&rpmcc RPM_SMD_PNOC_A_CLK>;
};

ocmemnoc: interconnect@fc470000 {
@@ -1102,7 +1102,7 @@ ocmemnoc: interconnect@fc470000 {
#interconnect-cells = <1>;
clock-names = "bus", "bus_a";
clocks = <&rpmcc RPM_SMD_OCMEMGX_CLK>,
- <&rpmcc RPM_SMD_OCMEMGX_A_CLK>;
+ <&rpmcc RPM_SMD_OCMEMGX_A_CLK>;
};

mmssnoc: interconnect@fc478000 {
@@ -1111,7 +1111,7 @@ mmssnoc: interconnect@fc478000 {
#interconnect-cells = <1>;
clock-names = "bus", "bus_a";
clocks = <&mmcc MMSS_S0_AXI_CLK>,
- <&mmcc MMSS_S0_AXI_CLK>;
+ <&mmcc MMSS_S0_AXI_CLK>;
};

cnoc: interconnect@fc480000 {
@@ -1120,7 +1120,7 @@ cnoc: interconnect@fc480000 {
#interconnect-cells = <1>;
clock-names = "bus", "bus_a";
clocks = <&rpmcc RPM_SMD_CNOC_CLK>,
- <&rpmcc RPM_SMD_CNOC_A_CLK>;
+ <&rpmcc RPM_SMD_CNOC_A_CLK>;
};

tsens: thermal-sensor@fc4a9000 {

--
2.41.0

2023-06-27 20:53:51

by Konrad Dybcio

Subject: Re: [PATCH 1/2] ARM: dts: qcom: msm8974: replace incorrect indentation in interconnect

On 27.06.2023 21:45, Luca Weiss wrote:
> The clocks definition in the interconnect nodes should use tabs (+ 1
> space) for indentation instead of 9 spaces. Fix that.
>
> Signed-off-by: Luca Weiss <[email protected]>
> ---
Reviewed-by: Konrad Dybcio <[email protected]>

Konrad
> arch/arm/boot/dts/qcom/qcom-msm8974.dtsi | 12 ++++++------
> 1 file changed, 6 insertions(+), 6 deletions(-)
>
> diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8974.dtsi
> index aeca504918a0..c6475837eda3 100644
> --- a/arch/arm/boot/dts/qcom/qcom-msm8974.dtsi
> +++ b/arch/arm/boot/dts/qcom/qcom-msm8974.dtsi
> @@ -1075,7 +1075,7 @@ bimc: interconnect@fc380000 {
> #interconnect-cells = <1>;
> clock-names = "bus", "bus_a";
> clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
> - <&rpmcc RPM_SMD_BIMC_A_CLK>;
> + <&rpmcc RPM_SMD_BIMC_A_CLK>;
> };
>
> snoc: interconnect@fc460000 {
> @@ -1084,7 +1084,7 @@ snoc: interconnect@fc460000 {
> #interconnect-cells = <1>;
> clock-names = "bus", "bus_a";
> clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
> - <&rpmcc RPM_SMD_SNOC_A_CLK>;
> + <&rpmcc RPM_SMD_SNOC_A_CLK>;
> };
>
> pnoc: interconnect@fc468000 {
> @@ -1093,7 +1093,7 @@ pnoc: interconnect@fc468000 {
> #interconnect-cells = <1>;
> clock-names = "bus", "bus_a";
> clocks = <&rpmcc RPM_SMD_PNOC_CLK>,
> - <&rpmcc RPM_SMD_PNOC_A_CLK>;
> + <&rpmcc RPM_SMD_PNOC_A_CLK>;
> };
>
> ocmemnoc: interconnect@fc470000 {
> @@ -1102,7 +1102,7 @@ ocmemnoc: interconnect@fc470000 {
> #interconnect-cells = <1>;
> clock-names = "bus", "bus_a";
> clocks = <&rpmcc RPM_SMD_OCMEMGX_CLK>,
> - <&rpmcc RPM_SMD_OCMEMGX_A_CLK>;
> + <&rpmcc RPM_SMD_OCMEMGX_A_CLK>;
> };
>
> mmssnoc: interconnect@fc478000 {
> @@ -1111,7 +1111,7 @@ mmssnoc: interconnect@fc478000 {
> #interconnect-cells = <1>;
> clock-names = "bus", "bus_a";
> clocks = <&mmcc MMSS_S0_AXI_CLK>,
> - <&mmcc MMSS_S0_AXI_CLK>;
> + <&mmcc MMSS_S0_AXI_CLK>;
> };
>
> cnoc: interconnect@fc480000 {
> @@ -1120,7 +1120,7 @@ cnoc: interconnect@fc480000 {
> #interconnect-cells = <1>;
> clock-names = "bus", "bus_a";
> clocks = <&rpmcc RPM_SMD_CNOC_CLK>,
> - <&rpmcc RPM_SMD_CNOC_A_CLK>;
> + <&rpmcc RPM_SMD_CNOC_A_CLK>;
> };
>
> tsens: thermal-sensor@fc4a9000 {
>