From: Zelong Dong <[email protected]>
Add new compatible and DT bindings for Amlogic's Meson-C3 Reset Controller
Change-Id: Ie8941818bde5b736689e43367f66827c5bc0449e
Signed-off-by: Zelong Dong <[email protected]>
---
.../bindings/reset/amlogic,meson-reset.yaml | 1 +
.../reset/amlogic,meson-c3-reset.h | 119 ++++++++++++++++++
2 files changed, 120 insertions(+)
create mode 100644 include/dt-bindings/reset/amlogic,meson-c3-reset.h
diff --git a/Documentation/devicetree/bindings/reset/amlogic,meson-reset.yaml b/Documentation/devicetree/bindings/reset/amlogic,meson-reset.yaml
index d3fdee89d4f8..cf1da9f7bc51 100644
--- a/Documentation/devicetree/bindings/reset/amlogic,meson-reset.yaml
+++ b/Documentation/devicetree/bindings/reset/amlogic,meson-reset.yaml
@@ -18,6 +18,7 @@ properties:
- amlogic,meson-axg-reset # Reset Controller on AXG and compatible SoCs
- amlogic,meson-a1-reset # Reset Controller on A1 and compatible SoCs
- amlogic,meson-s4-reset # Reset Controller on S4 and compatible SoCs
+ - amlogic,meson-c3-reset # Reset Controller on C3 and compatible SoCs
reg:
maxItems: 1
diff --git a/include/dt-bindings/reset/amlogic,meson-c3-reset.h b/include/dt-bindings/reset/amlogic,meson-c3-reset.h
new file mode 100644
index 000000000000..24b39d60b2f7
--- /dev/null
+++ b/include/dt-bindings/reset/amlogic,meson-c3-reset.h
@@ -0,0 +1,119 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
+/*
+ * Copyright (c) 2023 Amlogic, Inc. All rights reserved.
+ */
+
+#ifndef _DT_BINDINGS_AMLOGIC_MESON_C3_RESET_H
+#define _DT_BINDINGS_AMLOGIC_MESON_C3_RESET_H
+
+/* RESET0 */
+/* 0-3 */
+#define RESET_USBCTRL 4
+/* 5-7 */
+#define RESET_USBPHY20 8
+/* 9 */
+#define RESET_USB2DRD 10
+#define RESET_MIPI_DSI_HOST 11
+#define RESET_MIPI_DSI_PHY 12
+/* 13-20 */
+#define RESET_GE2D 21
+#define RESET_DWAP 22
+/* 23-31 */
+
+/* RESET1 */
+#define RESET_AUDIO 32
+/* 33-34 */
+#define RESET_DDRAPB 35
+#define RESET_DDR 36
+#define RESET_DOS_CAPB3 37
+#define RESET_DOS 38
+/* 39-46 */
+#define RESET_NNA 47
+#define RESET_ETHERNET 48
+#define RESET_ISP 49
+#define RESET_VC9000E_APB 50
+#define RESET_VC9000E_A 51
+/* 52 */
+#define RESET_VC9000E_CORE 53
+/* 54-63 */
+
+/* RESET2 */
+#define RESET_ABUS_ARB 64
+#define RESET_IRCTRL 65
+/* 66 */
+#define RESET_TEMP_PII 67
+/* 68-72 */
+#define RESET_SPICC_0 73
+#define RESET_SPICC_1 74
+#define RESET_RSA 75
+
+/* 76-79 */
+#define RESET_MSR_CLK 80
+#define RESET_SPIFC 81
+#define RESET_SAR_ADC 82
+/* 83-87 */
+#define RESET_ACODEC 88
+/* 89-90 */
+#define RESET_WATCHDOG 91
+/* 92-95 */
+
+/* RESET3 */
+#define RESET_ISP_NIC_GPV 96
+#define RESET_ISP_NIC_MAIN 97
+#define RESET_ISP_NIC_VCLK 98
+#define RESET_ISP_NIC_VOUT 99
+#define RESET_ISP_NIC_ALL 100
+#define RESET_VOUT 101
+#define RESET_VOUT_VENC 102
+/* 103 */
+#define RESET_CVE_NIC_GPV 104
+#define RESET_CVE_NIC_MAIN 105
+#define RESET_CVE_NIC_GE2D 106
+#define RESET_CVE_NIC_DW 106
+#define RESET_CVE_NIC_CVE 108
+#define RESET_CVE_NIC_ALL 109
+#define RESET_CVE 110
+/* 112-127 */
+
+/* RESET4 */
+#define RESET_RTC 128
+#define RESET_PWM_AB 129
+#define RESET_PWM_CD 130
+#define RESET_PWM_EF 131
+#define RESET_PWM_GH 132
+#define RESET_PWM_IJ 133
+#define RESET_PWM_KL 134
+#define RESET_PWM_MN 135
+/* 136-137 */
+#define RESET_UART_A 138
+#define RESET_UART_B 139
+#define RESET_UART_C 140
+#define RESET_UART_D 141
+#define RESET_UART_E 142
+#define RESET_UART_F 143
+#define RESET_I2C_S_A 144
+#define RESET_I2C_M_A 145
+#define RESET_I2C_M_B 146
+#define RESET_I2C_M_C 147
+#define RESET_I2C_M_D 148
+/* 149-151 */
+#define RESET_SD_EMMC_A 152
+#define RESET_SD_EMMC_B 153
+#define RESET_SD_EMMC_C 154
+
+/* RESET5 */
+/* 160-172 */
+#define RESET_BRG_NIC_NNA 173
+#define RESET_BRG_MUX_NIC_MAIN 174
+#define RESET_BRG_AO_NIC_ALL 175
+/* 176-183 */
+#define RESET_BRG_NIC_VAPB 184
+#define RESET_BRG_NIC_SDIO_B 185
+#define RESET_BRG_NIC_SDIO_A 186
+#define RESET_BRG_NIC_EMMC 187
+#define RESET_BRG_NIC_DSU 188
+#define RESET_BRG_NIC_SYSCLK 189
+#define RESET_BRG_NIC_MAIN 190
+#define RESET_BRG_NIC_ALL 191
+
+#endif
--
2.35.1
Hello Zelong,
Thank you for the patch! Please find my notes below.
On Fri, Jun 30, 2023 at 08:10:57PM +0800, zelong dong wrote:
> From: Zelong Dong <[email protected]>
>
> Add new compatible and DT bindings for Amlogic's Meson-C3 Reset Controller
>
> Change-Id: Ie8941818bde5b736689e43367f66827c5bc0449e
> Signed-off-by: Zelong Dong <[email protected]>
> ---
> .../bindings/reset/amlogic,meson-reset.yaml | 1 +
> .../reset/amlogic,meson-c3-reset.h | 119 ++++++++++++++++++
> 2 files changed, 120 insertions(+)
> create mode 100644 include/dt-bindings/reset/amlogic,meson-c3-reset.h
>
> diff --git a/Documentation/devicetree/bindings/reset/amlogic,meson-reset.yaml b/Documentation/devicetree/bindings/reset/amlogic,meson-reset.yaml
> index d3fdee89d4f8..cf1da9f7bc51 100644
> --- a/Documentation/devicetree/bindings/reset/amlogic,meson-reset.yaml
> +++ b/Documentation/devicetree/bindings/reset/amlogic,meson-reset.yaml
> @@ -18,6 +18,7 @@ properties:
> - amlogic,meson-axg-reset # Reset Controller on AXG and compatible SoCs
> - amlogic,meson-a1-reset # Reset Controller on A1 and compatible SoCs
> - amlogic,meson-s4-reset # Reset Controller on S4 and compatible SoCs
> + - amlogic,meson-c3-reset # Reset Controller on C3 and compatible SoCs
>
> reg:
> maxItems: 1
> diff --git a/include/dt-bindings/reset/amlogic,meson-c3-reset.h b/include/dt-bindings/reset/amlogic,meson-c3-reset.h
> new file mode 100644
> index 000000000000..24b39d60b2f7
> --- /dev/null
> +++ b/include/dt-bindings/reset/amlogic,meson-c3-reset.h
> @@ -0,0 +1,119 @@
> +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
Please fix the license issue, you can get it from checkpatch:
$ scripts/checkpatch.pl --strict include/dt-bindings/reset/amlogic,meson-c3-reset.h
WARNING: DT binding headers should be licensed (GPL-2.0-only OR .*)
#1: FILE: include/dt-bindings/reset/amlogic,meson-c3-reset.h:1:
+/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
total: 0 errors, 1 warnings, 0 checks, 119 lines checked
NOTE: For some of the reported defects, checkpatch may be able to
mechanically convert to the typical style using --fix or --fix-inplace.
include/dt-bindings/reset/amlogic,meson-c3-reset.h has style problems, please review.
NOTE: If any of the errors are false positives, please report
them to the maintainer, see CHECKPATCH in MAINTAINERS.
> +/*
> + * Copyright (c) 2023 Amlogic, Inc. All rights reserved.
> + */
> +
> +#ifndef _DT_BINDINGS_AMLOGIC_MESON_C3_RESET_H
> +#define _DT_BINDINGS_AMLOGIC_MESON_C3_RESET_H
> +
> +/* RESET0 */
> +/* 0-3 */
> +#define RESET_USBCTRL 4
> +/* 5-7 */
> +#define RESET_USBPHY20 8
> +/* 9 */
> +#define RESET_USB2DRD 10
> +#define RESET_MIPI_DSI_HOST 11
> +#define RESET_MIPI_DSI_PHY 12
> +/* 13-20 */
> +#define RESET_GE2D 21
> +#define RESET_DWAP 22
> +/* 23-31 */
> +
> +/* RESET1 */
> +#define RESET_AUDIO 32
> +/* 33-34 */
> +#define RESET_DDRAPB 35
> +#define RESET_DDR 36
> +#define RESET_DOS_CAPB3 37
> +#define RESET_DOS 38
> +/* 39-46 */
> +#define RESET_NNA 47
> +#define RESET_ETHERNET 48
> +#define RESET_ISP 49
> +#define RESET_VC9000E_APB 50
> +#define RESET_VC9000E_A 51
> +/* 52 */
> +#define RESET_VC9000E_CORE 53
> +/* 54-63 */
> +
> +/* RESET2 */
> +#define RESET_ABUS_ARB 64
> +#define RESET_IRCTRL 65
> +/* 66 */
> +#define RESET_TEMP_PII 67
> +/* 68-72 */
> +#define RESET_SPICC_0 73
> +#define RESET_SPICC_1 74
> +#define RESET_RSA 75
> +
> +/* 76-79 */
> +#define RESET_MSR_CLK 80
> +#define RESET_SPIFC 81
> +#define RESET_SAR_ADC 82
> +/* 83-87 */
> +#define RESET_ACODEC 88
> +/* 89-90 */
> +#define RESET_WATCHDOG 91
> +/* 92-95 */
> +
> +/* RESET3 */
> +#define RESET_ISP_NIC_GPV 96
> +#define RESET_ISP_NIC_MAIN 97
> +#define RESET_ISP_NIC_VCLK 98
> +#define RESET_ISP_NIC_VOUT 99
> +#define RESET_ISP_NIC_ALL 100
> +#define RESET_VOUT 101
> +#define RESET_VOUT_VENC 102
> +/* 103 */
> +#define RESET_CVE_NIC_GPV 104
> +#define RESET_CVE_NIC_MAIN 105
> +#define RESET_CVE_NIC_GE2D 106
> +#define RESET_CVE_NIC_DW 106
> +#define RESET_CVE_NIC_CVE 108
> +#define RESET_CVE_NIC_ALL 109
> +#define RESET_CVE 110
> +/* 112-127 */
> +
> +/* RESET4 */
> +#define RESET_RTC 128
> +#define RESET_PWM_AB 129
> +#define RESET_PWM_CD 130
> +#define RESET_PWM_EF 131
> +#define RESET_PWM_GH 132
> +#define RESET_PWM_IJ 133
> +#define RESET_PWM_KL 134
> +#define RESET_PWM_MN 135
> +/* 136-137 */
> +#define RESET_UART_A 138
> +#define RESET_UART_B 139
> +#define RESET_UART_C 140
> +#define RESET_UART_D 141
> +#define RESET_UART_E 142
> +#define RESET_UART_F 143
> +#define RESET_I2C_S_A 144
> +#define RESET_I2C_M_A 145
> +#define RESET_I2C_M_B 146
> +#define RESET_I2C_M_C 147
> +#define RESET_I2C_M_D 148
> +/* 149-151 */
> +#define RESET_SD_EMMC_A 152
> +#define RESET_SD_EMMC_B 153
> +#define RESET_SD_EMMC_C 154
> +
> +/* RESET5 */
> +/* 160-172 */
> +#define RESET_BRG_NIC_NNA 173
> +#define RESET_BRG_MUX_NIC_MAIN 174
> +#define RESET_BRG_AO_NIC_ALL 175
> +/* 176-183 */
> +#define RESET_BRG_NIC_VAPB 184
> +#define RESET_BRG_NIC_SDIO_B 185
> +#define RESET_BRG_NIC_SDIO_A 186
> +#define RESET_BRG_NIC_EMMC 187
> +#define RESET_BRG_NIC_DSU 188
> +#define RESET_BRG_NIC_SYSCLK 189
> +#define RESET_BRG_NIC_MAIN 190
> +#define RESET_BRG_NIC_ALL 191
> +
> +#endif
> --
> 2.35.1
>
>
> _______________________________________________
> linux-amlogic mailing list
> [email protected]
> http://lists.infradead.org/mailman/listinfo/linux-amlogic
--
Thank you,
Dmitry
Hi,
On 30/06/2023 14:10, zelong dong wrote:
> From: Zelong Dong <[email protected]>
>
> Add new compatible and DT bindings for Amlogic's Meson-C3 Reset Controller
>
> Change-Id: Ie8941818bde5b736689e43367f66827c5bc0449e
Please drop Change-Id when sending patches upstream, same for patch 2
Thanks,
Neil
> Signed-off-by: Zelong Dong <[email protected]>
> ---
> .../bindings/reset/amlogic,meson-reset.yaml | 1 +
> .../reset/amlogic,meson-c3-reset.h | 119 ++++++++++++++++++
> 2 files changed, 120 insertions(+)
> create mode 100644 include/dt-bindings/reset/amlogic,meson-c3-reset.h
>
> diff --git a/Documentation/devicetree/bindings/reset/amlogic,meson-reset.yaml b/Documentation/devicetree/bindings/reset/amlogic,meson-reset.yaml
> index d3fdee89d4f8..cf1da9f7bc51 100644
> --- a/Documentation/devicetree/bindings/reset/amlogic,meson-reset.yaml
> +++ b/Documentation/devicetree/bindings/reset/amlogic,meson-reset.yaml
> @@ -18,6 +18,7 @@ properties:
> - amlogic,meson-axg-reset # Reset Controller on AXG and compatible SoCs
> - amlogic,meson-a1-reset # Reset Controller on A1 and compatible SoCs
> - amlogic,meson-s4-reset # Reset Controller on S4 and compatible SoCs
> + - amlogic,meson-c3-reset # Reset Controller on C3 and compatible SoCs
>
> reg:
> maxItems: 1
> diff --git a/include/dt-bindings/reset/amlogic,meson-c3-reset.h b/include/dt-bindings/reset/amlogic,meson-c3-reset.h
> new file mode 100644
> index 000000000000..24b39d60b2f7
> --- /dev/null
> +++ b/include/dt-bindings/reset/amlogic,meson-c3-reset.h
> @@ -0,0 +1,119 @@
> +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
> +/*
> + * Copyright (c) 2023 Amlogic, Inc. All rights reserved.
> + */
> +
> +#ifndef _DT_BINDINGS_AMLOGIC_MESON_C3_RESET_H
> +#define _DT_BINDINGS_AMLOGIC_MESON_C3_RESET_H
> +
> +/* RESET0 */
> +/* 0-3 */
> +#define RESET_USBCTRL 4
> +/* 5-7 */
> +#define RESET_USBPHY20 8
> +/* 9 */
> +#define RESET_USB2DRD 10
> +#define RESET_MIPI_DSI_HOST 11
> +#define RESET_MIPI_DSI_PHY 12
> +/* 13-20 */
> +#define RESET_GE2D 21
> +#define RESET_DWAP 22
> +/* 23-31 */
> +
> +/* RESET1 */
> +#define RESET_AUDIO 32
> +/* 33-34 */
> +#define RESET_DDRAPB 35
> +#define RESET_DDR 36
> +#define RESET_DOS_CAPB3 37
> +#define RESET_DOS 38
> +/* 39-46 */
> +#define RESET_NNA 47
> +#define RESET_ETHERNET 48
> +#define RESET_ISP 49
> +#define RESET_VC9000E_APB 50
> +#define RESET_VC9000E_A 51
> +/* 52 */
> +#define RESET_VC9000E_CORE 53
> +/* 54-63 */
> +
> +/* RESET2 */
> +#define RESET_ABUS_ARB 64
> +#define RESET_IRCTRL 65
> +/* 66 */
> +#define RESET_TEMP_PII 67
> +/* 68-72 */
> +#define RESET_SPICC_0 73
> +#define RESET_SPICC_1 74
> +#define RESET_RSA 75
> +
> +/* 76-79 */
> +#define RESET_MSR_CLK 80
> +#define RESET_SPIFC 81
> +#define RESET_SAR_ADC 82
> +/* 83-87 */
> +#define RESET_ACODEC 88
> +/* 89-90 */
> +#define RESET_WATCHDOG 91
> +/* 92-95 */
> +
> +/* RESET3 */
> +#define RESET_ISP_NIC_GPV 96
> +#define RESET_ISP_NIC_MAIN 97
> +#define RESET_ISP_NIC_VCLK 98
> +#define RESET_ISP_NIC_VOUT 99
> +#define RESET_ISP_NIC_ALL 100
> +#define RESET_VOUT 101
> +#define RESET_VOUT_VENC 102
> +/* 103 */
> +#define RESET_CVE_NIC_GPV 104
> +#define RESET_CVE_NIC_MAIN 105
> +#define RESET_CVE_NIC_GE2D 106
> +#define RESET_CVE_NIC_DW 106
> +#define RESET_CVE_NIC_CVE 108
> +#define RESET_CVE_NIC_ALL 109
> +#define RESET_CVE 110
> +/* 112-127 */
> +
> +/* RESET4 */
> +#define RESET_RTC 128
> +#define RESET_PWM_AB 129
> +#define RESET_PWM_CD 130
> +#define RESET_PWM_EF 131
> +#define RESET_PWM_GH 132
> +#define RESET_PWM_IJ 133
> +#define RESET_PWM_KL 134
> +#define RESET_PWM_MN 135
> +/* 136-137 */
> +#define RESET_UART_A 138
> +#define RESET_UART_B 139
> +#define RESET_UART_C 140
> +#define RESET_UART_D 141
> +#define RESET_UART_E 142
> +#define RESET_UART_F 143
> +#define RESET_I2C_S_A 144
> +#define RESET_I2C_M_A 145
> +#define RESET_I2C_M_B 146
> +#define RESET_I2C_M_C 147
> +#define RESET_I2C_M_D 148
> +/* 149-151 */
> +#define RESET_SD_EMMC_A 152
> +#define RESET_SD_EMMC_B 153
> +#define RESET_SD_EMMC_C 154
> +
> +/* RESET5 */
> +/* 160-172 */
> +#define RESET_BRG_NIC_NNA 173
> +#define RESET_BRG_MUX_NIC_MAIN 174
> +#define RESET_BRG_AO_NIC_ALL 175
> +/* 176-183 */
> +#define RESET_BRG_NIC_VAPB 184
> +#define RESET_BRG_NIC_SDIO_B 185
> +#define RESET_BRG_NIC_SDIO_A 186
> +#define RESET_BRG_NIC_EMMC 187
> +#define RESET_BRG_NIC_DSU 188
> +#define RESET_BRG_NIC_SYSCLK 189
> +#define RESET_BRG_NIC_MAIN 190
> +#define RESET_BRG_NIC_ALL 191
> +
> +#endif
On 30/06/2023 14:10, zelong dong wrote:
> From: Zelong Dong <[email protected]>
>
> Add new compatible and DT bindings for Amlogic's Meson-C3 Reset Controller
>
> Change-Id: Ie8941818bde5b736689e43367f66827c5bc0449e
Please run scripts/checkpatch.pl and fix reported warnings. Some
warnings can be ignored, but the code here looks like it needs a fix.
Feel free to get in touch if the warning is not clear.
> Signed-off-by: Zelong Dong <[email protected]>
Please use scripts/get_maintainers.pl to get a list of necessary people
and lists to CC. It might happen, that command when run on an older
kernel, gives you outdated entries. Therefore please be sure you base
your patches on recent Linux kernel.
Best regards,
Krzysztof