the firmware only support low latency mode for h264,
but firmware will notify an event to driver
when one frame is decoded,
if V4L2_CID_MPEG_VIDEO_DEC_DISPLAY_DELAY_ENABLE is enabled,
and V4L2_CID_MPEG_VIDEO_DEC_DISPLAY_DELAY is set to 0,
driver can display the decoded frame immediately.
Fixes: ffa331d9bf94 ("media: amphion: decoder implement display delay enable")
Signed-off-by: Ming Qian <[email protected]>
---
drivers/media/platform/amphion/vdec.c | 25 ++++++++++++++++++++++---
1 file changed, 22 insertions(+), 3 deletions(-)
diff --git a/drivers/media/platform/amphion/vdec.c b/drivers/media/platform/amphion/vdec.c
index 60f3a73c6a8a..eeb2ef72df5b 100644
--- a/drivers/media/platform/amphion/vdec.c
+++ b/drivers/media/platform/amphion/vdec.c
@@ -742,6 +742,21 @@ static int vdec_frame_decoded(struct vpu_inst *inst, void *arg)
dev_info(inst->dev, "[%d] buf[%d] has been decoded\n", inst->id, info->id);
vpu_set_buffer_state(vbuf, VPU_BUF_STATE_DECODED);
vdec->decoded_frame_count++;
+ if (vdec->params.display_delay_enable) {
+ struct vpu_format *cur_fmt;
+
+ cur_fmt = vpu_get_format(inst, inst->cap_format.type);
+ vpu_set_buffer_state(vbuf, VPU_BUF_STATE_READY);
+ for (int i = 0; i < vbuf->vb2_buf.num_planes; i++)
+ vb2_set_plane_payload(&vbuf->vb2_buf,
+ i, vpu_get_fmt_plane_size(cur_fmt, i));
+ vbuf->field = cur_fmt->field;
+ vbuf->sequence = vdec->sequence++;
+ dev_dbg(inst->dev, "[%d][OUTPUT TS]%32lld\n", inst->id, vbuf->vb2_buf.timestamp);
+
+ v4l2_m2m_buf_done(vbuf, VB2_BUF_STATE_DONE);
+ vdec->display_frame_count++;
+ }
exit:
vpu_inst_unlock(inst);
@@ -769,14 +784,14 @@ static void vdec_buf_done(struct vpu_inst *inst, struct vpu_frame_info *frame)
struct vpu_format *cur_fmt;
struct vpu_vb2_buffer *vpu_buf;
struct vb2_v4l2_buffer *vbuf;
- u32 sequence;
int i;
if (!frame)
return;
vpu_inst_lock(inst);
- sequence = vdec->sequence++;
+ if (!vdec->params.display_delay_enable)
+ vdec->sequence++;
vpu_buf = vdec_find_buffer(inst, frame->luma);
vpu_inst_unlock(inst);
if (!vpu_buf) {
@@ -795,13 +810,17 @@ static void vdec_buf_done(struct vpu_inst *inst, struct vpu_frame_info *frame)
dev_err(inst->dev, "[%d] buffer id(%d, %d) dismatch\n",
inst->id, vbuf->vb2_buf.index, frame->id);
+ if (vpu_get_buffer_state(vbuf) == VPU_BUF_STATE_READY && vdec->params.display_delay_enable)
+ return;
+
if (vpu_get_buffer_state(vbuf) != VPU_BUF_STATE_DECODED)
dev_err(inst->dev, "[%d] buffer(%d) ready without decoded\n", inst->id, frame->id);
+
vpu_set_buffer_state(vbuf, VPU_BUF_STATE_READY);
for (i = 0; i < vbuf->vb2_buf.num_planes; i++)
vb2_set_plane_payload(&vbuf->vb2_buf, i, vpu_get_fmt_plane_size(cur_fmt, i));
vbuf->field = cur_fmt->field;
- vbuf->sequence = sequence;
+ vbuf->sequence = vdec->sequence;
dev_dbg(inst->dev, "[%d][OUTPUT TS]%32lld\n", inst->id, vbuf->vb2_buf.timestamp);
v4l2_m2m_buf_done(vbuf, VB2_BUF_STATE_DONE);
--
2.38.1