Add linux device tree entry related to
Yosemite V4 specific devices connected to BMC SoC.
Signed-off-by: Delphine CC Chiu <[email protected]>
---
arch/arm/boot/dts/Makefile | 1 +
.../dts/aspeed-bmc-facebook-yosemitev4.dts | 570 ++++++++++++++++++
2 files changed, 571 insertions(+)
create mode 100644 arch/arm/boot/dts/aspeed-bmc-facebook-yosemitev4.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 59829fc90315..871e6d271262 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1631,6 +1631,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
aspeed-bmc-facebook-galaxy100.dtb \
aspeed-bmc-facebook-greatlakes.dtb \
aspeed-bmc-facebook-minipack.dtb \
+ aspeed-bmc-facebook-yosemitev4.dtb \
aspeed-bmc-facebook-tiogapass.dtb \
aspeed-bmc-facebook-wedge40.dtb \
aspeed-bmc-facebook-wedge100.dtb \
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-yosemitev4.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-yosemitev4.dts
new file mode 100644
index 000000000000..1df151fb6ff3
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-facebook-yosemitev4.dts
@@ -0,0 +1,570 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2022 Facebook Inc.
+
+/dts-v1/;
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+#include <dt-bindings/i2c/i2c.h>
+
+/ {
+ model = "Facebook Yosemite V4 BMC";
+ compatible = "facebook,yosemitev4-bmc", "aspeed,ast2600";
+
+ aliases {
+ serial4 = &uart5;
+ serial5 = &uart6;
+ serial6 = &uart7;
+ serial7 = &uart8;
+ serial8 = &uart9;
+ };
+
+ chosen {
+ bootargs = "console=ttyS4,57600n8";
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x80000000>;
+ };
+
+ iio-hwmon {
+ compatible = "iio-hwmon";
+ io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>,
+ <&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
+ <&adc1 0>, <&adc1 1>;
+ };
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&uart3 {
+ status = "okay";
+};
+
+&uart4 {
+ status = "okay";
+};
+
+&uart5 {
+ status = "okay";
+};
+
+&uart6 {
+ status = "okay";
+};
+
+&uart7 {
+ status = "okay";
+};
+
+&uart8 {
+ status = "okay";
+};
+
+&uart9 {
+ status = "okay";
+};
+
+&wdt1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wdtrst1_default>;
+ aspeed,reset-type = "soc";
+ aspeed,external-signal;
+ aspeed,ext-push-pull;
+ aspeed,ext-active-high;
+ aspeed,ext-pulse-duration = <256>;
+};
+
+&mac2 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rmii3_default>;
+ no-hw-checksum;
+ use-ncsi;
+ mlx,multi-host;
+ ncsi-ctrl,start-redo-probe;
+ ncsi-ctrl,no-channel-monitor;
+ ncsi-package = <1>;
+ ncsi-channel = <1>;
+ ncsi-rexmit = <1>;
+ ncsi-timeout = <2>;
+};
+
+&mac3 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rmii4_default>;
+ no-hw-checksum;
+ use-ncsi;
+ mlx,multi-host;
+ ncsi-ctrl,start-redo-probe;
+ ncsi-ctrl,no-channel-monitor;
+ ncsi-package = <1>;
+ ncsi-channel = <1>;
+ ncsi-rexmit = <1>;
+ ncsi-timeout = <2>;
+};
+
+&rtc {
+ status = "okay";
+};
+
+&fmc {
+ status = "okay";
+ flash@0 {
+ status = "okay";
+ m25p,fast-read;
+ label = "bmc";
+ spi-rx-bus-width = <4>;
+ spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-64.dtsi"
+ };
+ flash@1 {
+ status = "okay";
+ m25p,fast-read;
+ label = "bmc2";
+ spi-rx-bus-width = <4>;
+ spi-max-frequency = <50000000>;
+ };
+};
+
+&i2c0 {
+ status = "okay";
+ bus-frequency = <400000>;
+ multi-master;
+ adm1278@40 {
+ compatible = "adi,adm1278";
+ reg = <0x40>;
+ };
+};
+
+&i2c1 {
+ status = "okay";
+ bus-frequency = <400000>;
+ multi-master;
+ adm1278@40 {
+ compatible = "adi,adm1278";
+ reg = <0x40>;
+ };
+};
+
+&i2c2 {
+ status = "okay";
+ bus-frequency = <400000>;
+ multi-master;
+ adm1278@40 {
+ compatible = "adi,adm1278";
+ reg = <0x40>;
+ };
+};
+
+&i2c3 {
+ status = "okay";
+ bus-frequency = <400000>;
+ multi-master;
+ adm1278@40 {
+ compatible = "adi,adm1278";
+ reg = <0x40>;
+ };
+};
+
+&i2c4 {
+ status = "okay";
+ bus-frequency = <400000>;
+ multi-master;
+ adm1278@40 {
+ compatible = "adi,adm1278";
+ reg = <0x40>;
+ };
+};
+
+&i2c5 {
+ status = "okay";
+ bus-frequency = <400000>;
+ multi-master;
+ adm1278@40 {
+ compatible = "adi,adm1278";
+ reg = <0x40>;
+ };
+};
+
+&i2c6 {
+ status = "okay";
+ bus-frequency = <400000>;
+ multi-master;
+ adm1278@40 {
+ compatible = "adi,adm1278";
+ reg = <0x40>;
+ };
+};
+
+&i2c7 {
+ status = "okay";
+ bus-frequency = <400000>;
+ multi-master;
+ adm1278@40 {
+ compatible = "adi,adm1278";
+ reg = <0x40>;
+ };
+};
+
+&i2c8 {
+ status = "okay";
+ bus-frequency = <400000>;
+ i2cswitch@70 {
+ compatible = "nxp,pca9544";
+ idle-state = <0>;
+ i2c-mux-idle-disconnect;
+ reg = <0x70>;
+ };
+};
+
+&i2c9 {
+ status = "okay";
+ bus-frequency = <400000>;
+ i2cswitch@71 {
+ compatible = "nxp,pca9544";
+ idle-state = <0>;
+ i2c-mux-idle-disconnect;
+ reg = <0x71>;
+ };
+};
+
+&i2c10 {
+ status = "okay";
+ bus-frequency = <400000>;
+};
+
+&i2c11 {
+ status = "okay";
+ bus-frequency = <400000>;
+ adm1272@10 {
+ compatible = "adi, adm1272";
+ reg = <0x10>;
+ };
+
+ adm1272@12 {
+ compatible = "adi, adm1272";
+ reg = <0x12>;
+ };
+
+ pca9555@20 {
+ compatible = "nxp,pca9555";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ pca9555@21 {
+ compatible = "nxp,pca9555";
+ reg = <0x21>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ pca9555@22 {
+ compatible = "nxp,pca9555";
+ reg = <0x22>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ pca9555@23 {
+ compatible = "nxp,pca9555";
+ reg = <0x23>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ tmp75@48 {
+ compatible = "ti,tmp75";
+ reg = <0x48>;
+ };
+
+ tmp75@49 {
+ compatible = "ti,tmp75";
+ reg = <0x49>;
+ };
+
+ tmp75@4a {
+ compatible = "ti,tmp75";
+ reg = <0x4a>;
+ };
+
+ tmp75@4b {
+ compatible = "ti,tmp75";
+ reg = <0x4b>;
+ };
+
+ eeprom@54 {
+ compatible = "atmel,24c256";
+ reg = <0x54>;
+ };
+};
+
+&i2c12 {
+ status = "okay";
+ bus-frequency = <400000>;
+};
+
+&i2c13 {
+ status = "okay";
+ bus-frequency = <400000>;
+};
+
+&i2c14 {
+ status = "okay";
+ bus-frequency = <400000>;
+ adc128d818@1d {
+ compatible = "ti,adc128d818";
+ reg = <0x1d>;
+ ti,mode = /bits/ 8 <2>;
+ };
+
+ adc128d818@35 {
+ compatible = "ti,adc128d818";
+ reg = <0x35>;
+ ti,mode = /bits/ 8 <2>;
+ };
+
+ adc128d818@37 {
+ compatible = "ti,adc128d818";
+ reg = <0x37>;
+ ti,mode = /bits/ 8 <2>;
+ };
+
+ ina230@40 {
+ compatible = "ti,ina230";
+ reg = <0x40>;
+ };
+
+ ina230@41 {
+ compatible = "ti,ina230";
+ reg = <0x41>;
+ };
+
+ ina230@42 {
+ compatible = "ti,ina230";
+ reg = <0x42>;
+ };
+
+ ina230@41 {
+ compatible = "ti,ina230";
+ reg = <0x43>;
+ };
+
+ ina230@44 {
+ compatible = "ti,ina230";
+ reg = <0x44>;
+ };
+
+ tmp75@48 {
+ compatible = "ti,tmp75";
+ reg = <0x48>;
+ };
+
+ tmp75@4e {
+ compatible = "ti,tmp75";
+ reg = <0x4e>;
+ };
+
+ tmp75@4f {
+ compatible = "ti,tmp75";
+ reg = <0x4f>;
+ };
+
+ eeprom@50 {
+ compatible = "atmel,24c128";
+ reg = <0x50>;
+ };
+
+ eeprom@51 {
+ compatible = "atmel,24c128";
+ reg = <0x51>;
+ };
+
+ i2cswitch@71 {
+ compatible = "nxp,pca9846";
+ idle-state = <0>;
+ i2c-mux-idle-disconnect;
+ reg = <0x71>;
+
+ i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ adc128d818@1f {
+ compatible = "ti,adc128d818";
+ reg = <0x1f>;
+ ti,mode = /bits/ 8 <2>;
+ };
+
+ max31790@20{
+ compatible = "max31790";
+ reg = <0x20>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ fan-mode = "pwm";
+ fanconfig = /bits/ 8 <0x19 0x19 0x19 0x18 0x18 0x18>;
+ };
+
+ tca6424@22{
+ compatible = "ti,tca6424";
+ reg = <0x22>;
+ };
+
+ max31790@23{
+ compatible = "max31790";
+ reg = <0x23>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ fan-mode = "pwm";
+ fanconfig = /bits/ 8 <0x19 0x19 0x19 0x18 0x18 0x18>;
+ };
+
+ max11615@33 {
+ compatible = "maxim,max11615";
+ reg = <0x33>;
+ };
+
+ eeprom@52 {
+ compatible = "atmel,24c128";
+ reg = <0x52>;
+ };
+
+ pca9552@61 {
+ compatible = "nxp,pca9552";
+ reg = <0x61>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+ };
+
+ i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ adc128d818@1f {
+ compatible = "ti,adc128d818";
+ reg = <0x1f>;
+ ti,mode = /bits/ 8 <2>;
+ };
+
+ max31790@20{
+ compatible = "max31790";
+ reg = <0x20>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ fan-mode = "pwm";
+ fanconfig = /bits/ 8 <0x19 0x19 0x19 0x18 0x18 0x18>;
+ };
+
+ tca6424@22{
+ compatible = "ti,tca6424";
+ reg = <0x22>;
+ };
+
+ max31790@23{
+ compatible = "max31790";
+ reg = <0x23>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ fan-mode = "pwm";
+ fanconfig = /bits/ 8 <0x19 0x19 0x19 0x18 0x18 0x18>;
+ };
+
+ max11615@33 {
+ compatible = "maxim,max11615";
+ reg = <0x33>;
+ };
+
+ eeprom@52 {
+ compatible = "atmel,24c128";
+ reg = <0x52>;
+ };
+
+ pca9552@61 {
+ compatible = "nxp,pca9552";
+ reg = <0x61>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+ };
+ };
+
+ i2cswitch@73 {
+ compatible = "nxp,pca9544";
+ idle-state = <0>;
+ i2c-mux-idle-disconnect;
+ reg = <0x73>;
+
+ i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ max11617@6a {
+ compatible = "maxim,max11617";
+ reg = <0x6a>;
+ };
+ };
+
+ i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ max11617@6a {
+ compatible = "maxim,max11617";
+ reg = <0x6a>;
+ };
+ };
+ };
+};
+
+&i2c15 {
+ status = "okay";
+ bus-frequency = <400000>;
+};
+
+&adc0 {
+ ref_voltage = <2500>;
+ status = "okay";
+ pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
+ &pinctrl_adc2_default &pinctrl_adc3_default
+ &pinctrl_adc4_default &pinctrl_adc5_default
+ &pinctrl_adc6_default &pinctrl_adc7_default>;
+};
+
+&adc1 {
+ ref_voltage = <2500>;
+ status = "okay";
+ pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default>;
+};
+
+
+&ehci0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&uhci {
+ status = "okay";
+};
--
2.25.1
On 12/07/2023 09:37, Delphine CC Chiu wrote:
> Add linux device tree entry related to
> Yosemite V4 specific devices connected to BMC SoC.
>
> Signed-off-by: Delphine CC Chiu <[email protected]>
> ---
> arch/arm/boot/dts/Makefile | 1 +
> .../dts/aspeed-bmc-facebook-yosemitev4.dts | 570 ++++++++++++++++++
> 2 files changed, 571 insertions(+)
> create mode 100644 arch/arm/boot/dts/aspeed-bmc-facebook-yosemitev4.dts
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 59829fc90315..871e6d271262 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -1631,6 +1631,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
> aspeed-bmc-facebook-galaxy100.dtb \
> aspeed-bmc-facebook-greatlakes.dtb \
> aspeed-bmc-facebook-minipack.dtb \
> + aspeed-bmc-facebook-yosemitev4.dtb \
> aspeed-bmc-facebook-tiogapass.dtb \
> aspeed-bmc-facebook-wedge40.dtb \
> aspeed-bmc-facebook-wedge100.dtb \
> diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-yosemitev4.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-yosemitev4.dts
> new file mode 100644
> index 000000000000..1df151fb6ff3
> --- /dev/null
> +++ b/arch/arm/boot/dts/aspeed-bmc-facebook-yosemitev4.dts
> @@ -0,0 +1,570 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +// Copyright 2022 Facebook Inc.
> +
> +/dts-v1/;
> +#include "aspeed-g6.dtsi"
> +#include <dt-bindings/gpio/aspeed-gpio.h>
> +#include <dt-bindings/leds/leds-pca955x.h>
> +#include <dt-bindings/i2c/i2c.h>
> +
> +/ {
> + model = "Facebook Yosemite V4 BMC";
> + compatible = "facebook,yosemitev4-bmc", "aspeed,ast2600";
> +
> + aliases {
> + serial4 = &uart5;
> + serial5 = &uart6;
> + serial6 = &uart7;
> + serial7 = &uart8;
> + serial8 = &uart9;
> + };
> +
> + chosen {
> + bootargs = "console=ttyS4,57600n8";
Use stdout-path
> + };
> +
> + memory@80000000 {
> + device_type = "memory";
> + reg = <0x80000000 0x80000000>;
> + };
...
> +
> +&i2c0 {
> + status = "okay";
> + bus-frequency = <400000>;
> + multi-master;
> + adm1278@40 {
Node names should be generic. See also an explanation and list of
examples (not exhaustive) in DT specification:
https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation
> + compatible = "adi,adm1278";
> + reg = <0x40>;
> + };
> +};
> +
> +&i2c1 {
> + status = "okay";
> + bus-frequency = <400000>;
> + multi-master;
> + adm1278@40 {
Look, you already got such comment so you are repeating same mistakes.
https://lore.kernel.org/all/[email protected]/
Node names should be generic. See also an explanation and list of
examples (not exhaustive) in DT specification:
https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation
> + compatible = "adi,adm1278";
> + reg = <0x40>;
> + };
> +};
> +
> +&i2c2 {
> + status = "okay";
> + bus-frequency = <400000>;
> + multi-master;
> + adm1278@40 {
Node names should be generic. See also an explanation and list of
examples (not exhaustive) in DT specification:
https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation
> + compatible = "adi,adm1278";
I stop here, there is no point to review same mistakes.
Best regards,
Krzysztof
v2 - Add Facebook Yosemite V4 (AST2600) BMC
Delphine CC Chiu (2):
dt-bindings: arm: aspeed: add Facebook Yosemite V4 board
ARM: dts: aspeed: yosemitev4: add Facebook Yosemite V4 BMC
.../bindings/arm/aspeed/aspeed.yaml | 1 +
arch/arm/boot/dts/Makefile | 1 +
.../dts/aspeed-bmc-facebook-yosemitev4.dts | 577 ++++++++++++++++++
3 files changed, 579 insertions(+)
create mode 100644 arch/arm/boot/dts/aspeed-bmc-facebook-yosemitev4.dts
--
2.25.1
Document the new compatibles used on Facebook Yosemite V4.
Signed-off-by: Delphine CC Chiu <[email protected]>
---
Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml b/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml
index e0eff4c05879..2ef6821e3648 100644
--- a/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml
+++ b/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml
@@ -79,6 +79,7 @@ properties:
- facebook,elbert-bmc
- facebook,fuji-bmc
- facebook,greatlakes-bmc
+ - facebook,yosemitev4-bmc
- ibm,everest-bmc
- ibm,rainier-bmc
- ibm,tacoma-bmc
--
2.25.1
On 14/07/2023 04:34, Delphine CC Chiu wrote:
> Document the new compatibles used on Facebook Yosemite V4.
>
> Signed-off-by: Delphine CC Chiu <[email protected]>
> ---
This is a friendly reminder during the review process.
It looks like you received a tag and forgot to add it.
If you do not know the process, here is a short explanation:
Please add Acked-by/Reviewed-by/Tested-by tags when posting new
versions. However, there's no need to repost patches *only* to add the
tags. The upstream maintainer will do that for acks received on the
version they apply.
https://elixir.bootlin.com/linux/v6.4/source/Documentation/process/submitting-patches.rst#L552
If a tag was not added on purpose, please state why and what changed.
Best regards,
Krzysztof
On 14/07/2023 04:34, Delphine CC Chiu wrote:
> v2 - Add Facebook Yosemite V4 (AST2600) BMC
>
Do not attach (thread) your patchsets to some other threads (unrelated
or older versions). This buries them deep in the mailbox and might
interfere with applying entire sets.
Best regards,
Krzysztof