The motorcomm phy (YT8531) supports the ability to adjust the drive
strength of the rx_clk/rx_data, and the default strength may not be
suitable for all boards. So add configurable options to better match
the boards.(e.g. StarFive VisionFive 2)
The first patch adds a description of dt-bingding, and the second patch adds
YT8531's parsing and settings for pad-driver-strength-cfg.
Changes since v3:
Patch 1:
- Used current values instead of register values
- Added units and numerical descriptions of driver-strength
Patch 2:
- Added a lookup table to listing the valid values in the schema (by Andrew Lunn)
Changes since v2:
Patch 2:
- Readjusted the order of YT8531_RGMII_xxx to below YTPHY_PAD_DRIVE_STRENGTH_REG (by Frank Sae)
- Reversed Christmas tree, sort these longest first, shortest last (by Andrew Lunn)
- Rebased on tag v6.4
Changes since v1:
Patch 1:
- Renamed "rx-xxx-driver-strength" to "motorcomm,rx-xxx-driver-strength" (by Frank Sae)
Patch 2:
- Added default values for rxc/rxd driver strength (by Frank Sea/Andrew Lunn)
- Added range checking when val is in DT (by Frank Sea/Andrew Lunn)
Previous versions:
v1 - https://patchwork.kernel.org/project/netdevbpf/cover/[email protected]
v2 - https://patchwork.kernel.org/project/netdevbpf/cover/[email protected]
v3 - https://patchwork.kernel.org/project/netdevbpf/cover/[email protected]
Samin Guo (2):
dt-bindings: net: motorcomm: Add pad driver strength cfg
net: phy: motorcomm: Add pad drive strength cfg support
.../bindings/net/motorcomm,yt8xxx.yaml | 46 +++++++
drivers/net/phy/motorcomm.c | 114 ++++++++++++++++++
2 files changed, 160 insertions(+)
base-commit: 06c2afb862f9da8dc5efa4b6076a0e48c3fbaaa5
--
2.17.1