On Qualcomm SoCs, certain branch clocks either need to be always-on, or
should be if you're interested in touching some part of the hardware.
Using CLK_IS_CRITICAL for this purpose sounds like a genius idea,
however that messes with the runtime pm handling - if a clock is
marked as such, the clock controller device will never enter the
"suspended" state, leaving the associated resources online, which in
turn breaks SoC-wide suspend.
This series aims to solve that on a couple SoCs that I could test the
changes on and it sprinkles some runtime pm enablement atop these drivers.
Signed-off-by: Konrad Dybcio <[email protected]>
---
Changes in v3:
- Rebase (next-20231219)
- Fix up a copypaste mistake in "gcc-sm6375: Unregister critical clocks" (bod)
- Pick up tags
- Link to v2: https://lore.kernel.org/r/[email protected]
Changes in v2:
- Rebase
- Pick up tags
- Fix up missing pm_runtime_put in SM6375 GCC (Johan)
- Clarify the commit message of "Add runtime PM" commits (Johan)
- "GPU_CCC" -> "GPU_CC" (oops)
- Rebase atop next-20231129
- Also fix up camcc-sm8550 & gcc-sm4450
- Unify and clean up the comment style
- Fix missing comments in gcc-sc7180..
- Drop Johan's ack from "clk: qcom: Use qcom_branch_set_clk_en()"
- Improve 6115 dt patch commit message (Bjorn)
- Link to v1: https://lore.kernel.org/r/[email protected]
---
Konrad Dybcio (15):
clk: qcom: branch: Add a helper for setting the enable bit
clk: qcom: Use qcom_branch_set_clk_en()
clk: qcom: gcc-sm6375: Unregister critical clocks
clk: qcom: gcc-sm6375: Add runtime PM
clk: qcom: gpucc-sm6375: Unregister critical clocks
clk: qcom: gpucc-sm6115: Unregister critical clocks
clk: qcom: gpucc-sm6115: Add runtime PM
clk: qcom: gcc-sm6115: Unregister critical clocks
clk: qcom: gcc-sm6115: Add runtime PM
clk: qcom: gcc-qcm2290: Unregister critical clocks
clk: qcom: gcc-qcm2290: Add runtime PM
arm64: dts: qcom: sm6375: Add VDD_CX to GCC
arm64: dts: qcom: qcm2290: Add VDD_CX to GCC
arm64: dts: qcom: sm6115: Add VDD_CX to GCC
arm64: dts: qcom: sm6115: Add VDD_CX to GPU_CC
arch/arm64/boot/dts/qcom/qcm2290.dtsi | 1 +
arch/arm64/boot/dts/qcom/sm6115.dtsi | 3 +
arch/arm64/boot/dts/qcom/sm6375.dtsi | 1 +
drivers/clk/qcom/camcc-sm8550.c | 9 +--
drivers/clk/qcom/clk-branch.h | 7 ++
drivers/clk/qcom/dispcc-qcm2290.c | 3 +-
drivers/clk/qcom/dispcc-sc7280.c | 6 +-
drivers/clk/qcom/dispcc-sc8280xp.c | 3 +-
drivers/clk/qcom/dispcc-sm6115.c | 3 +-
drivers/clk/qcom/dispcc-sm8250.c | 3 +-
drivers/clk/qcom/dispcc-sm8450.c | 6 +-
drivers/clk/qcom/dispcc-sm8550.c | 6 +-
drivers/clk/qcom/gcc-qcm2290.c | 127 ++++++-----------------------
drivers/clk/qcom/gcc-sa8775p.c | 24 +++---
drivers/clk/qcom/gcc-sc7180.c | 21 ++---
drivers/clk/qcom/gcc-sc7280.c | 19 ++---
drivers/clk/qcom/gcc-sc8180x.c | 27 +++----
drivers/clk/qcom/gcc-sc8280xp.c | 24 +++---
drivers/clk/qcom/gcc-sdx55.c | 11 +--
drivers/clk/qcom/gcc-sdx65.c | 12 +--
drivers/clk/qcom/gcc-sdx75.c | 9 +--
drivers/clk/qcom/gcc-sm4450.c | 27 ++-----
drivers/clk/qcom/gcc-sm6115.c | 145 +++++++---------------------------
drivers/clk/qcom/gcc-sm6375.c | 126 +++++++----------------------
drivers/clk/qcom/gcc-sm7150.c | 22 ++----
drivers/clk/qcom/gcc-sm8250.c | 18 ++---
drivers/clk/qcom/gcc-sm8350.c | 19 ++---
drivers/clk/qcom/gcc-sm8450.c | 20 ++---
drivers/clk/qcom/gcc-sm8550.c | 20 ++---
drivers/clk/qcom/gpucc-sc7280.c | 8 +-
drivers/clk/qcom/gpucc-sc8280xp.c | 8 +-
drivers/clk/qcom/gpucc-sm6115.c | 52 +++++-------
drivers/clk/qcom/gpucc-sm6375.c | 33 +-------
drivers/clk/qcom/gpucc-sm8550.c | 9 +--
drivers/clk/qcom/lpasscorecc-sc7180.c | 6 +-
drivers/clk/qcom/videocc-sm8250.c | 5 +-
drivers/clk/qcom/videocc-sm8350.c | 9 +--
drivers/clk/qcom/videocc-sm8450.c | 12 +--
drivers/clk/qcom/videocc-sm8550.c | 12 +--
39 files changed, 236 insertions(+), 640 deletions(-)
---
base-commit: aa4db8324c4d0e67aa4670356df4e9fae14b4d37
change-id: 20230717-topic-branch_aon_cleanup-6976c13fe71c
Best regards,
--
Konrad Dybcio <[email protected]>
We hardcode some clocks to be always-on, as they're essential to the
functioning of the SoC / some peripherals. Add a helper to do so
to make the writes less magic.
Reviewed-by: Johan Hovold <[email protected]>
Reviewed-by: Bryan O'Donoghue <[email protected]>
Signed-off-by: Konrad Dybcio <[email protected]>
---
drivers/clk/qcom/clk-branch.h | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/drivers/clk/qcom/clk-branch.h b/drivers/clk/qcom/clk-branch.h
index 8ffed603c050..0514bc43100b 100644
--- a/drivers/clk/qcom/clk-branch.h
+++ b/drivers/clk/qcom/clk-branch.h
@@ -64,6 +64,7 @@ struct clk_mem_branch {
#define CBCR_FORCE_MEM_PERIPH_OFF BIT(12)
#define CBCR_WAKEUP GENMASK(11, 8)
#define CBCR_SLEEP GENMASK(7, 4)
+#define CBCR_CLOCK_ENABLE BIT(0)
static inline void qcom_branch_set_force_mem_core(struct regmap *regmap,
struct clk_branch clk, bool on)
@@ -98,6 +99,12 @@ static inline void qcom_branch_set_sleep(struct regmap *regmap, struct clk_branc
FIELD_PREP(CBCR_SLEEP, val));
}
+static inline void qcom_branch_set_clk_en(struct regmap *regmap, u32 cbcr)
+{
+ regmap_update_bits(regmap, cbcr, CBCR_CLOCK_ENABLE,
+ CBCR_CLOCK_ENABLE);
+}
+
extern const struct clk_ops clk_branch_ops;
extern const struct clk_ops clk_branch2_ops;
extern const struct clk_ops clk_branch_simple_ops;
--
2.43.0
The GPU_CC block on SM6115 is powered by the VDD_CX rail. We need to
ensure that CX is enabled to prevent unwanted power collapse and that
the reference is dropped when unused so that the system can enter a
firmware-managed lower power state.
Enable runtime PM to keep the power flowing only when necessary.
Signed-off-by: Konrad Dybcio <[email protected]>
---
drivers/clk/qcom/gpucc-sm6115.c | 19 +++++++++++++++++--
1 file changed, 17 insertions(+), 2 deletions(-)
diff --git a/drivers/clk/qcom/gpucc-sm6115.c b/drivers/clk/qcom/gpucc-sm6115.c
index 93a50431aef8..b50979ce1cbe 100644
--- a/drivers/clk/qcom/gpucc-sm6115.c
+++ b/drivers/clk/qcom/gpucc-sm6115.c
@@ -8,6 +8,7 @@
#include <linux/mod_devicetable.h>
#include <linux/module.h>
#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
#include <linux/regmap.h>
#include <dt-bindings/clock/qcom,sm6115-gpucc.h>
@@ -443,10 +444,21 @@ MODULE_DEVICE_TABLE(of, gpu_cc_sm6115_match_table);
static int gpu_cc_sm6115_probe(struct platform_device *pdev)
{
struct regmap *regmap;
+ int ret;
+
+ ret = devm_pm_runtime_enable(&pdev->dev);
+ if (ret)
+ return ret;
+
+ ret = pm_runtime_resume_and_get(&pdev->dev);
+ if (ret)
+ return ret;
regmap = qcom_cc_map(pdev, &gpu_cc_sm6115_desc);
- if (IS_ERR(regmap))
+ if (IS_ERR(regmap)) {
+ pm_runtime_put(&pdev->dev);
return PTR_ERR(regmap);
+ }
clk_alpha_pll_configure(&gpu_cc_pll0, regmap, &gpu_cc_pll0_config);
clk_alpha_pll_configure(&gpu_cc_pll1, regmap, &gpu_cc_pll1_config);
@@ -461,7 +473,10 @@ static int gpu_cc_sm6115_probe(struct platform_device *pdev)
qcom_branch_set_clk_en(regmap, 0x1078); /* GPU_CC_AHB_CLK */
qcom_branch_set_clk_en(regmap, 0x1060); /* GPU_CC_GX_CXO_CLK */
- return qcom_cc_really_probe(pdev, &gpu_cc_sm6115_desc, regmap);
+ ret = qcom_cc_really_probe(pdev, &gpu_cc_sm6115_desc, regmap);
+ pm_runtime_put(&pdev->dev);
+
+ return ret;
}
static struct platform_driver gpu_cc_sm6115_driver = {
--
2.43.0
Instead of magically poking at the bit0 of branch clocks' CBCR, use
the newly introduced helper.
Reviewed-by: Bryan O'Donoghue <[email protected]>
Signed-off-by: Konrad Dybcio <[email protected]>
---
drivers/clk/qcom/camcc-sm8550.c | 9 ++-------
drivers/clk/qcom/dispcc-qcm2290.c | 3 +--
drivers/clk/qcom/dispcc-sc7280.c | 6 +-----
drivers/clk/qcom/dispcc-sc8280xp.c | 3 +--
drivers/clk/qcom/dispcc-sm6115.c | 3 +--
drivers/clk/qcom/dispcc-sm8250.c | 3 +--
drivers/clk/qcom/dispcc-sm8450.c | 6 +-----
drivers/clk/qcom/dispcc-sm8550.c | 6 +-----
drivers/clk/qcom/gcc-sa8775p.c | 24 +++++++++---------------
drivers/clk/qcom/gcc-sc7180.c | 21 ++++++++-------------
drivers/clk/qcom/gcc-sc7280.c | 19 +++++++------------
drivers/clk/qcom/gcc-sc8180x.c | 27 ++++++++++-----------------
drivers/clk/qcom/gcc-sc8280xp.c | 24 +++++++++---------------
drivers/clk/qcom/gcc-sdx55.c | 11 +++--------
drivers/clk/qcom/gcc-sdx65.c | 12 ++++--------
drivers/clk/qcom/gcc-sdx75.c | 9 ++-------
drivers/clk/qcom/gcc-sm4450.c | 27 ++++++++-------------------
drivers/clk/qcom/gcc-sm6375.c | 10 +++-------
drivers/clk/qcom/gcc-sm7150.c | 22 ++++++++--------------
drivers/clk/qcom/gcc-sm8250.c | 18 ++++++------------
drivers/clk/qcom/gcc-sm8350.c | 19 +++++++------------
drivers/clk/qcom/gcc-sm8450.c | 20 +++++++-------------
drivers/clk/qcom/gcc-sm8550.c | 20 +++++++-------------
drivers/clk/qcom/gpucc-sc7280.c | 8 ++------
drivers/clk/qcom/gpucc-sc8280xp.c | 8 ++------
drivers/clk/qcom/gpucc-sm8550.c | 9 ++-------
drivers/clk/qcom/lpasscorecc-sc7180.c | 6 +-----
drivers/clk/qcom/videocc-sm8250.c | 5 ++---
drivers/clk/qcom/videocc-sm8350.c | 9 ++-------
drivers/clk/qcom/videocc-sm8450.c | 12 +++---------
drivers/clk/qcom/videocc-sm8550.c | 12 +++---------
31 files changed, 124 insertions(+), 267 deletions(-)
diff --git a/drivers/clk/qcom/camcc-sm8550.c b/drivers/clk/qcom/camcc-sm8550.c
index dd51ba4ea757..de424913cf47 100644
--- a/drivers/clk/qcom/camcc-sm8550.c
+++ b/drivers/clk/qcom/camcc-sm8550.c
@@ -3536,13 +3536,8 @@ static int cam_cc_sm8550_probe(struct platform_device *pdev)
clk_lucid_ole_pll_configure(&cam_cc_pll11, regmap, &cam_cc_pll11_config);
clk_lucid_ole_pll_configure(&cam_cc_pll12, regmap, &cam_cc_pll12_config);
- /*
- * Keep clocks always enabled:
- * cam_cc_gdsc_clk
- * cam_cc_sleep_clk
- */
- regmap_update_bits(regmap, 0x1419c, BIT(0), BIT(0));
- regmap_update_bits(regmap, 0x142cc, BIT(0), BIT(0));
+ qcom_branch_set_clk_en(regmap, 0x1419c); /* CAM_CC_GDSC_CLK */
+ qcom_branch_set_clk_en(regmap, 0x142cc); /* CAM_CC_SLEEP_CLK */
ret = qcom_cc_really_probe(pdev, &cam_cc_sm8550_desc, regmap);
diff --git a/drivers/clk/qcom/dispcc-qcm2290.c b/drivers/clk/qcom/dispcc-qcm2290.c
index 9206f0eed446..a6d905feeddb 100644
--- a/drivers/clk/qcom/dispcc-qcm2290.c
+++ b/drivers/clk/qcom/dispcc-qcm2290.c
@@ -519,8 +519,7 @@ static int disp_cc_qcm2290_probe(struct platform_device *pdev)
clk_alpha_pll_configure(&disp_cc_pll0, regmap, &disp_cc_pll0_config);
- /* Keep DISP_CC_XO_CLK always-ON */
- regmap_update_bits(regmap, 0x604c, BIT(0), BIT(0));
+ qcom_branch_set_clk_en(regmap, 0x604c); /* DISP_CC_XO_CLK */
ret = qcom_cc_really_probe(pdev, &disp_cc_qcm2290_desc, regmap);
if (ret) {
diff --git a/drivers/clk/qcom/dispcc-sc7280.c b/drivers/clk/qcom/dispcc-sc7280.c
index ad596d567f6a..2d40febbedc2 100644
--- a/drivers/clk/qcom/dispcc-sc7280.c
+++ b/drivers/clk/qcom/dispcc-sc7280.c
@@ -878,11 +878,7 @@ static int disp_cc_sc7280_probe(struct platform_device *pdev)
clk_lucid_pll_configure(&disp_cc_pll0, regmap, &disp_cc_pll0_config);
- /*
- * Keep the clocks always-ON
- * DISP_CC_XO_CLK
- */
- regmap_update_bits(regmap, 0x5008, BIT(0), BIT(0));
+ qcom_branch_set_clk_en(regmap, 0x5008); /* DISP_CC_XO_CLK */
return qcom_cc_really_probe(pdev, &disp_cc_sc7280_desc, regmap);
}
diff --git a/drivers/clk/qcom/dispcc-sc8280xp.c b/drivers/clk/qcom/dispcc-sc8280xp.c
index 30f636b9f0ec..606beb34028d 100644
--- a/drivers/clk/qcom/dispcc-sc8280xp.c
+++ b/drivers/clk/qcom/dispcc-sc8280xp.c
@@ -3178,8 +3178,7 @@ static int disp_cc_sc8280xp_probe(struct platform_device *pdev)
goto out_pm_runtime_put;
}
- /* DISP_CC_XO_CLK always-on */
- regmap_update_bits(regmap, 0x605c, BIT(0), BIT(0));
+ qcom_branch_set_clk_en(regmap, 0x605c); /* DISP_CC_XO_CLK */
out_pm_runtime_put:
pm_runtime_put_sync(&pdev->dev);
diff --git a/drivers/clk/qcom/dispcc-sm6115.c b/drivers/clk/qcom/dispcc-sm6115.c
index 1fab43f08e73..a3cf7d09dfb2 100644
--- a/drivers/clk/qcom/dispcc-sm6115.c
+++ b/drivers/clk/qcom/dispcc-sm6115.c
@@ -583,8 +583,7 @@ static int disp_cc_sm6115_probe(struct platform_device *pdev)
clk_alpha_pll_configure(&disp_cc_pll0, regmap, &disp_cc_pll0_config);
- /* Keep DISP_CC_XO_CLK always-ON */
- regmap_update_bits(regmap, 0x604c, BIT(0), BIT(0));
+ qcom_branch_set_clk_en(regmap, 0x604c); /* DISP_CC_XO_CLK */
ret = qcom_cc_really_probe(pdev, &disp_cc_sm6115_desc, regmap);
if (ret) {
diff --git a/drivers/clk/qcom/dispcc-sm8250.c b/drivers/clk/qcom/dispcc-sm8250.c
index e17bb8b543b5..eedb48311ac9 100644
--- a/drivers/clk/qcom/dispcc-sm8250.c
+++ b/drivers/clk/qcom/dispcc-sm8250.c
@@ -1365,8 +1365,7 @@ static int disp_cc_sm8250_probe(struct platform_device *pdev)
/* Enable clock gating for MDP clocks */
regmap_update_bits(regmap, 0x8000, 0x10, 0x10);
- /* DISP_CC_XO_CLK always-on */
- regmap_update_bits(regmap, 0x605c, BIT(0), BIT(0));
+ qcom_branch_set_clk_en(regmap, 0x605c); /* DISP_CC_XO_CLK */
ret = qcom_cc_really_probe(pdev, &disp_cc_sm8250_desc, regmap);
diff --git a/drivers/clk/qcom/dispcc-sm8450.c b/drivers/clk/qcom/dispcc-sm8450.c
index 2c4aecd75186..2c374286ee66 100644
--- a/drivers/clk/qcom/dispcc-sm8450.c
+++ b/drivers/clk/qcom/dispcc-sm8450.c
@@ -1787,11 +1787,7 @@ static int disp_cc_sm8450_probe(struct platform_device *pdev)
/* Enable clock gating for MDP clocks */
regmap_update_bits(regmap, DISP_CC_MISC_CMD, 0x10, 0x10);
- /*
- * Keep clocks always enabled:
- * disp_cc_xo_clk
- */
- regmap_update_bits(regmap, 0xe05c, BIT(0), BIT(0));
+ qcom_branch_set_clk_en(regmap, 0xe05c); /* DISP_CC_XO_CLK */
ret = qcom_cc_really_probe(pdev, &disp_cc_sm8450_desc, regmap);
if (ret)
diff --git a/drivers/clk/qcom/dispcc-sm8550.c b/drivers/clk/qcom/dispcc-sm8550.c
index aefa19f3c2c5..cad2ca39c6c6 100644
--- a/drivers/clk/qcom/dispcc-sm8550.c
+++ b/drivers/clk/qcom/dispcc-sm8550.c
@@ -1772,11 +1772,7 @@ static int disp_cc_sm8550_probe(struct platform_device *pdev)
/* Enable clock gating for MDP clocks */
regmap_update_bits(regmap, DISP_CC_MISC_CMD, 0x10, 0x10);
- /*
- * Keep clocks always enabled:
- * disp_cc_xo_clk
- */
- regmap_update_bits(regmap, 0xe054, BIT(0), BIT(0));
+ qcom_branch_set_clk_en(regmap, 0xe054); /* DISP_CC_XO_CLK */
ret = qcom_cc_really_probe(pdev, &disp_cc_sm8550_desc, regmap);
if (ret)
diff --git a/drivers/clk/qcom/gcc-sa8775p.c b/drivers/clk/qcom/gcc-sa8775p.c
index 8171d23c96e6..9145ceecbb2f 100644
--- a/drivers/clk/qcom/gcc-sa8775p.c
+++ b/drivers/clk/qcom/gcc-sa8775p.c
@@ -4742,21 +4742,15 @@ static int gcc_sa8775p_probe(struct platform_device *pdev)
if (ret)
return ret;
- /*
- * Keep the clocks always-ON
- * GCC_CAMERA_AHB_CLK, GCC_CAMERA_XO_CLK, GCC_DISP1_AHB_CLK,
- * GCC_DISP1_XO_CLK, GCC_DISP_AHB_CLK, GCC_DISP_XO_CLK,
- * GCC_GPU_CFG_AHB_CLK, GCC_VIDEO_AHB_CLK, GCC_VIDEO_XO_CLK.
- */
- regmap_update_bits(regmap, 0x32004, BIT(0), BIT(0));
- regmap_update_bits(regmap, 0x32020, BIT(0), BIT(0));
- regmap_update_bits(regmap, 0xc7004, BIT(0), BIT(0));
- regmap_update_bits(regmap, 0xc7018, BIT(0), BIT(0));
- regmap_update_bits(regmap, 0x33004, BIT(0), BIT(0));
- regmap_update_bits(regmap, 0x33018, BIT(0), BIT(0));
- regmap_update_bits(regmap, 0x7d004, BIT(0), BIT(0));
- regmap_update_bits(regmap, 0x34004, BIT(0), BIT(0));
- regmap_update_bits(regmap, 0x34024, BIT(0), BIT(0));
+ qcom_branch_set_clk_en(regmap, 0x32004); /* GCC_CAMERA_AHB_CLK */
+ qcom_branch_set_clk_en(regmap, 0x32020); /* GCC_CAMERA_XO_CLK */
+ qcom_branch_set_clk_en(regmap, 0xc7004); /* GCC_DISP1_AHB_CLK */
+ qcom_branch_set_clk_en(regmap, 0xc7018); /* GCC_DISP1_XO_CLK */
+ qcom_branch_set_clk_en(regmap, 0x33004); /* GCC_DISP_AHB_CLK */
+ qcom_branch_set_clk_en(regmap, 0x33018); /* GCC_DISP_XO_CLK */
+ qcom_branch_set_clk_en(regmap, 0x7d004); /* GCC_GPU_CFG_AHB_CLK */
+ qcom_branch_set_clk_en(regmap, 0x34004); /* GCC_VIDEO_AHB_CLK */
+ qcom_branch_set_clk_en(regmap, 0x34024); /* GCC_VIDEO_XO_CLK */
return qcom_cc_really_probe(pdev, &gcc_sa8775p_desc, regmap);
}
diff --git a/drivers/clk/qcom/gcc-sc7180.c b/drivers/clk/qcom/gcc-sc7180.c
index a3406aadbd17..8fcf30fe2050 100644
--- a/drivers/clk/qcom/gcc-sc7180.c
+++ b/drivers/clk/qcom/gcc-sc7180.c
@@ -2443,19 +2443,14 @@ static int gcc_sc7180_probe(struct platform_device *pdev)
regmap_update_bits(regmap, 0x4d110, 0x3, 0x3);
regmap_update_bits(regmap, 0x71028, 0x3, 0x3);
- /*
- * Keep the clocks always-ON
- * GCC_CPUSS_GNOC_CLK, GCC_VIDEO_AHB_CLK, GCC_CAMERA_AHB_CLK,
- * GCC_DISP_AHB_CLK, GCC_GPU_CFG_AHB_CLK
- */
- regmap_update_bits(regmap, 0x48004, BIT(0), BIT(0));
- regmap_update_bits(regmap, 0x0b004, BIT(0), BIT(0));
- regmap_update_bits(regmap, 0x0b008, BIT(0), BIT(0));
- regmap_update_bits(regmap, 0x0b00c, BIT(0), BIT(0));
- regmap_update_bits(regmap, 0x0b02c, BIT(0), BIT(0));
- regmap_update_bits(regmap, 0x0b028, BIT(0), BIT(0));
- regmap_update_bits(regmap, 0x0b030, BIT(0), BIT(0));
- regmap_update_bits(regmap, 0x71004, BIT(0), BIT(0));
+ qcom_branch_set_clk_en(regmap, 0x48004); /* GCC_CPUSS_GNOC_CLK */
+ qcom_branch_set_clk_en(regmap, 0x0b004); /* GCC_VIDEO_AHB_CLK */
+ qcom_branch_set_clk_en(regmap, 0x0b008); /* GCC_CAMERA_AHB_CLK */
+ qcom_branch_set_clk_en(regmap, 0x0b00c); /* GCC_DISP_AHB_CLK */
+ qcom_branch_set_clk_en(regmap, 0x0b02c); /* GCC_CAMERA_XO_CLK */
+ qcom_branch_set_clk_en(regmap, 0x0b028); /* GCC_VIDEO_XO_CLK */
+ qcom_branch_set_clk_en(regmap, 0x0b030); /* GCC_DISP_XO_CLK */
+ qcom_branch_set_clk_en(regmap, 0x71004); /* GCC_GPU_CFG_AHB_CLK */
ret = qcom_cc_register_rcg_dfs(regmap, gcc_dfs_clocks,
ARRAY_SIZE(gcc_dfs_clocks));
diff --git a/drivers/clk/qcom/gcc-sc7280.c b/drivers/clk/qcom/gcc-sc7280.c
index 2b661df5de26..b2e2fa2a01a7 100644
--- a/drivers/clk/qcom/gcc-sc7280.c
+++ b/drivers/clk/qcom/gcc-sc7280.c
@@ -3453,18 +3453,13 @@ static int gcc_sc7280_probe(struct platform_device *pdev)
if (IS_ERR(regmap))
return PTR_ERR(regmap);
- /*
- * Keep the clocks always-ON
- * GCC_CAMERA_AHB_CLK/XO_CLK, GCC_DISP_AHB_CLK/XO_CLK
- * GCC_VIDEO_AHB_CLK/XO_CLK, GCC_GPU_CFG_AHB_CLK
- */
- regmap_update_bits(regmap, 0x26004, BIT(0), BIT(0));
- regmap_update_bits(regmap, 0x26028, BIT(0), BIT(0));
- regmap_update_bits(regmap, 0x27004, BIT(0), BIT(0));
- regmap_update_bits(regmap, 0x2701C, BIT(0), BIT(0));
- regmap_update_bits(regmap, 0x28004, BIT(0), BIT(0));
- regmap_update_bits(regmap, 0x28014, BIT(0), BIT(0));
- regmap_update_bits(regmap, 0x71004, BIT(0), BIT(0));
+ qcom_branch_set_clk_en(regmap, 0x26004);/* GCC_CAMERA_AHB_CLK */
+ qcom_branch_set_clk_en(regmap, 0x26028);/* GCC_CAMERA_XO_CLK */
+ qcom_branch_set_clk_en(regmap, 0x27004);/* GCC_DISP_AHB_CLK */
+ qcom_branch_set_clk_en(regmap, 0x2701c);/* GCC_DISP_XO_CLK */
+ qcom_branch_set_clk_en(regmap, 0x28004);/* GCC_VIDEO_AHB_CLK */
+ qcom_branch_set_clk_en(regmap, 0x28014);/* GCC_VIDEO_XO_CLK */
+ qcom_branch_set_clk_en(regmap, 0x71004);/* GCC_GPU_CFG_AHB_CLK */
regmap_update_bits(regmap, 0x7100C, BIT(13), BIT(13));
ret = qcom_cc_register_rcg_dfs(regmap, gcc_dfs_clocks,
diff --git a/drivers/clk/qcom/gcc-sc8180x.c b/drivers/clk/qcom/gcc-sc8180x.c
index ae2147381559..764cd41c5660 100644
--- a/drivers/clk/qcom/gcc-sc8180x.c
+++ b/drivers/clk/qcom/gcc-sc8180x.c
@@ -4579,23 +4579,16 @@ static int gcc_sc8180x_probe(struct platform_device *pdev)
if (IS_ERR(regmap))
return PTR_ERR(regmap);
- /*
- * Enable the following always-on clocks:
- * GCC_VIDEO_AHB_CLK, GCC_CAMERA_AHB_CLK, GCC_DISP_AHB_CLK,
- * GCC_VIDEO_XO_CLK, GCC_CAMERA_XO_CLK, GCC_DISP_XO_CLK,
- * GCC_CPUSS_GNOC_CLK, GCC_CPUSS_DVM_BUS_CLK, GCC_NPU_CFG_AHB_CLK and
- * GCC_GPU_CFG_AHB_CLK
- */
- regmap_update_bits(regmap, 0xb004, BIT(0), BIT(0));
- regmap_update_bits(regmap, 0xb008, BIT(0), BIT(0));
- regmap_update_bits(regmap, 0xb00c, BIT(0), BIT(0));
- regmap_update_bits(regmap, 0xb040, BIT(0), BIT(0));
- regmap_update_bits(regmap, 0xb044, BIT(0), BIT(0));
- regmap_update_bits(regmap, 0xb048, BIT(0), BIT(0));
- regmap_update_bits(regmap, 0x48004, BIT(0), BIT(0));
- regmap_update_bits(regmap, 0x48190, BIT(0), BIT(0));
- regmap_update_bits(regmap, 0x4d004, BIT(0), BIT(0));
- regmap_update_bits(regmap, 0x71004, BIT(0), BIT(0));
+ qcom_branch_set_clk_en(regmap, 0xb004); /* GCC_VIDEO_AHB_CLK */
+ qcom_branch_set_clk_en(regmap, 0xb008); /* GCC_CAMERA_AHB_CLK */
+ qcom_branch_set_clk_en(regmap, 0xb00c); /* GCC_DISP_AHB_CLK */
+ qcom_branch_set_clk_en(regmap, 0xb040); /* GCC_VIDEO_XO_CLK */
+ qcom_branch_set_clk_en(regmap, 0xb044); /* GCC_CAMERA_XO_CLK */
+ qcom_branch_set_clk_en(regmap, 0xb048); /* GCC_DISP_XO_CLK */
+ qcom_branch_set_clk_en(regmap, 0x48004); /* GCC_CPUSS_GNOC_CLK */
+ qcom_branch_set_clk_en(regmap, 0x48190); /* GCC_CPUSS_DVM_BUS_CLK */
+ qcom_branch_set_clk_en(regmap, 0x4d004); /* GCC_NPU_CFG_AHB_CLK */
+ qcom_branch_set_clk_en(regmap, 0x71004); /* GCC_GPU_CFG_AHB_CLK */
/* Disable the GPLL0 active input to NPU and GPU via MISC registers */
regmap_update_bits(regmap, 0x4d110, 0x3, 0x3);
diff --git a/drivers/clk/qcom/gcc-sc8280xp.c b/drivers/clk/qcom/gcc-sc8280xp.c
index bfb77931e868..1ba78990b9f4 100644
--- a/drivers/clk/qcom/gcc-sc8280xp.c
+++ b/drivers/clk/qcom/gcc-sc8280xp.c
@@ -7543,21 +7543,15 @@ static int gcc_sc8280xp_probe(struct platform_device *pdev)
goto err_put_rpm;
}
- /*
- * Keep the clocks always-ON
- * GCC_CAMERA_AHB_CLK, GCC_CAMERA_XO_CLK, GCC_DISP_AHB_CLK,
- * GCC_DISP_XO_CLK, GCC_GPU_CFG_AHB_CLK, GCC_VIDEO_AHB_CLK,
- * GCC_VIDEO_XO_CLK, GCC_DISP1_AHB_CLK, GCC_DISP1_XO_CLK
- */
- regmap_update_bits(regmap, 0x26004, BIT(0), BIT(0));
- regmap_update_bits(regmap, 0x26020, BIT(0), BIT(0));
- regmap_update_bits(regmap, 0x27004, BIT(0), BIT(0));
- regmap_update_bits(regmap, 0x27028, BIT(0), BIT(0));
- regmap_update_bits(regmap, 0x71004, BIT(0), BIT(0));
- regmap_update_bits(regmap, 0x28004, BIT(0), BIT(0));
- regmap_update_bits(regmap, 0x28028, BIT(0), BIT(0));
- regmap_update_bits(regmap, 0xbb004, BIT(0), BIT(0));
- regmap_update_bits(regmap, 0xbb028, BIT(0), BIT(0));
+ qcom_branch_set_clk_en(regmap, 0x26004); /* GCC_CAMERA_AHB_CLK */
+ qcom_branch_set_clk_en(regmap, 0x26020); /* GCC_CAMERA_XO_CLK */
+ qcom_branch_set_clk_en(regmap, 0x27004); /* GCC_DISP_AHB_CLK */
+ qcom_branch_set_clk_en(regmap, 0x27028); /* GCC_DISP_XO_CLK */
+ qcom_branch_set_clk_en(regmap, 0x71004); /* GCC_GPU_CFG_AHB_CLK */
+ qcom_branch_set_clk_en(regmap, 0x28004); /* GCC_VIDEO_AHB_CLK */
+ qcom_branch_set_clk_en(regmap, 0x28028); /* GCC_VIDEO_XO_CLK */
+ qcom_branch_set_clk_en(regmap, 0xbb004); /* GCC_DISP1_AHB_CLK */
+ qcom_branch_set_clk_en(regmap, 0xbb028); /* GCC_DISP1_XO_CLK */
ret = qcom_cc_register_rcg_dfs(regmap, gcc_dfs_clocks, ARRAY_SIZE(gcc_dfs_clocks));
if (ret)
diff --git a/drivers/clk/qcom/gcc-sdx55.c b/drivers/clk/qcom/gcc-sdx55.c
index d5e17122698c..314931b4b10f 100644
--- a/drivers/clk/qcom/gcc-sdx55.c
+++ b/drivers/clk/qcom/gcc-sdx55.c
@@ -1611,14 +1611,9 @@ static int gcc_sdx55_probe(struct platform_device *pdev)
if (IS_ERR(regmap))
return PTR_ERR(regmap);
- /*
- * Keep the clocks always-ON as they are critical to the functioning
- * of the system:
- * GCC_SYS_NOC_CPUSS_AHB_CLK, GCC_CPUSS_AHB_CLK, GCC_CPUSS_GNOC_CLK
- */
- regmap_update_bits(regmap, 0x6d008, BIT(0), BIT(0));
- regmap_update_bits(regmap, 0x6d008, BIT(21), BIT(21));
- regmap_update_bits(regmap, 0x6d008, BIT(22), BIT(22));
+ qcom_branch_set_clk_en(regmap, 0x6d008); /* GCC_SYS_NOC_CPUSS_AHB_CLK */
+ regmap_update_bits(regmap, 0x6d008, BIT(21), BIT(21)); /* GCC_CPUSS_AHB_CLK */
+ regmap_update_bits(regmap, 0x6d008, BIT(22), BIT(22)); /* GCC_CPUSS_GNOC_CLK */
return qcom_cc_really_probe(pdev, &gcc_sdx55_desc, regmap);
}
diff --git a/drivers/clk/qcom/gcc-sdx65.c b/drivers/clk/qcom/gcc-sdx65.c
index ffddbed5a6db..999268cc8eee 100644
--- a/drivers/clk/qcom/gcc-sdx65.c
+++ b/drivers/clk/qcom/gcc-sdx65.c
@@ -1574,14 +1574,10 @@ static int gcc_sdx65_probe(struct platform_device *pdev)
regmap = qcom_cc_map(pdev, &gcc_sdx65_desc);
if (IS_ERR(regmap))
return PTR_ERR(regmap);
- /*
- * Keep the clocks always-ON as they are critical to the functioning
- * of the system:
- * GCC_SYS_NOC_CPUSS_AHB_CLK, GCC_CPUSS_AHB_CLK, GCC_CPUSS_GNOC_CLK
- */
- regmap_update_bits(regmap, 0x6d008, BIT(0), BIT(0));
- regmap_update_bits(regmap, 0x6d008, BIT(21), BIT(21));
- regmap_update_bits(regmap, 0x6d008, BIT(22), BIT(22));
+
+ qcom_branch_set_clk_en(regmap, 0x6d008); /* GCC_SYS_NOC_CPUSS_AHB_CLK */
+ regmap_update_bits(regmap, 0x6d008, BIT(21), BIT(21)); /* GCC_CPUSS_AHB_CLK */
+ regmap_update_bits(regmap, 0x6d008, BIT(22), BIT(22)); /* GCC_CPUSS_GNOC_CLK */
return qcom_cc_really_probe(pdev, &gcc_sdx65_desc, regmap);
}
diff --git a/drivers/clk/qcom/gcc-sdx75.c b/drivers/clk/qcom/gcc-sdx75.c
index 573af17bd24c..0189da8c7a13 100644
--- a/drivers/clk/qcom/gcc-sdx75.c
+++ b/drivers/clk/qcom/gcc-sdx75.c
@@ -2936,13 +2936,8 @@ static int gcc_sdx75_probe(struct platform_device *pdev)
if (ret)
return ret;
- /*
- * Keep clocks always enabled:
- * gcc_ahb_pcie_link_clk
- * gcc_xo_pcie_link_clk
- */
- regmap_update_bits(regmap, 0x3e004, BIT(0), BIT(0));
- regmap_update_bits(regmap, 0x3e008, BIT(0), BIT(0));
+ qcom_branch_set_clk_en(regmap, 0x3e004); /* GCC_AHB_PCIE_LINK_CLK */
+ qcom_branch_set_clk_en(regmap, 0x3e008); /* GCC_XO_PCIE_LINK_CLK */
return qcom_cc_really_probe(pdev, &gcc_sdx75_desc, regmap);
}
diff --git a/drivers/clk/qcom/gcc-sm4450.c b/drivers/clk/qcom/gcc-sm4450.c
index 31abe2775fc8..ce7c209a3ed6 100644
--- a/drivers/clk/qcom/gcc-sm4450.c
+++ b/drivers/clk/qcom/gcc-sm4450.c
@@ -2849,25 +2849,14 @@ static int gcc_sm4450_probe(struct platform_device *pdev)
qcom_branch_set_force_mem_core(regmap, gcc_ufs_phy_ice_core_clk, true);
- /*
- * Keep clocks always enabled:
- * gcc_camera_ahb_clk
- * gcc_camera_sleep_clk
- * gcc_camera_xo_clk
- * gcc_disp_ahb_clk
- * gcc_disp_xo_clk
- * gcc_gpu_cfg_ahb_clk
- * gcc_video_ahb_clk
- * gcc_video_xo_clk
- */
- regmap_update_bits(regmap, 0x36004, BIT(0), BIT(0));
- regmap_update_bits(regmap, 0x36018, BIT(0), BIT(0));
- regmap_update_bits(regmap, 0x3601c, BIT(0), BIT(0));
- regmap_update_bits(regmap, 0x37004, BIT(0), BIT(0));
- regmap_update_bits(regmap, 0x37014, BIT(0), BIT(0));
- regmap_update_bits(regmap, 0x81004, BIT(0), BIT(0));
- regmap_update_bits(regmap, 0x42004, BIT(0), BIT(0));
- regmap_update_bits(regmap, 0x42018, BIT(0), BIT(0));
+ qcom_branch_set_clk_en(regmap, 0x36004); /* GCC_CAMERA_AHB_CLK */
+ qcom_branch_set_clk_en(regmap, 0x36018); /* GCC_CAMERA_SLEEP_CLK */
+ qcom_branch_set_clk_en(regmap, 0x3601c); /* GCC_CAMERA_XO_CLK */
+ qcom_branch_set_clk_en(regmap, 0x37004); /* GCC_DISP_AHB_CLK */
+ qcom_branch_set_clk_en(regmap, 0x37014); /* GCC_DISP_XO_CLK */
+ qcom_branch_set_clk_en(regmap, 0x81004); /* GCC_GPU_CFG_AHB_CLK */
+ qcom_branch_set_clk_en(regmap, 0x42004); /* GCC_VIDEO_AHB_CLK */
+ qcom_branch_set_clk_en(regmap, 0x42018); /* GCC_VIDEO_XO_CLK */
regmap_update_bits(regmap, 0x4201c, BIT(21), BIT(21));
diff --git a/drivers/clk/qcom/gcc-sm6375.c b/drivers/clk/qcom/gcc-sm6375.c
index 3dd15d765b22..fe1a004c259d 100644
--- a/drivers/clk/qcom/gcc-sm6375.c
+++ b/drivers/clk/qcom/gcc-sm6375.c
@@ -3882,13 +3882,9 @@ static int gcc_sm6375_probe(struct platform_device *pdev)
if (ret)
return ret;
- /*
- * Keep the following clocks always on:
- * GCC_CAMERA_XO_CLK, GCC_CPUSS_GNOC_CLK, GCC_DISP_XO_CLK
- */
- regmap_update_bits(regmap, 0x17028, BIT(0), BIT(0));
- regmap_update_bits(regmap, 0x2b004, BIT(0), BIT(0));
- regmap_update_bits(regmap, 0x1702c, BIT(0), BIT(0));
+ qcom_branch_set_clk_en(regmap, 0x17028); /* GCC_CAMERA_XO_CLK */
+ qcom_branch_set_clk_en(regmap, 0x2b004); /* GCC_CPUSS_GNOC_CLK */
+ qcom_branch_set_clk_en(regmap, 0x1702c); /* GCC_DISP_XO_CLK */
clk_lucid_pll_configure(&gpll10, regmap, &gpll10_config);
clk_lucid_pll_configure(&gpll11, regmap, &gpll11_config);
diff --git a/drivers/clk/qcom/gcc-sm7150.c b/drivers/clk/qcom/gcc-sm7150.c
index d9983bb27475..673810be8310 100644
--- a/drivers/clk/qcom/gcc-sm7150.c
+++ b/drivers/clk/qcom/gcc-sm7150.c
@@ -3002,20 +3002,14 @@ static int gcc_sm7150_probe(struct platform_device *pdev)
regmap_update_bits(regmap, 0x4d110, 0x3, 0x3);
regmap_update_bits(regmap, 0x71028, 0x3, 0x3);
- /*
- * Keep the critical clocks always-ON
- * GCC_CPUSS_GNOC_CLK, GCC_VIDEO_AHB_CLK, GCC_CAMERA_AHB_CLK,
- * GCC_DISP_AHB_CLK, GCC_CAMERA_XO_CLK, GCC_VIDEO_XO_CLK,
- * GCC_DISP_XO_CLK, GCC_GPU_CFG_AHB_CLK
- */
- regmap_update_bits(regmap, 0x48004, BIT(0), BIT(0));
- regmap_update_bits(regmap, 0x0b004, BIT(0), BIT(0));
- regmap_update_bits(regmap, 0x0b008, BIT(0), BIT(0));
- regmap_update_bits(regmap, 0x0b00c, BIT(0), BIT(0));
- regmap_update_bits(regmap, 0x0b02c, BIT(0), BIT(0));
- regmap_update_bits(regmap, 0x0b028, BIT(0), BIT(0));
- regmap_update_bits(regmap, 0x0b030, BIT(0), BIT(0));
- regmap_update_bits(regmap, 0x71004, BIT(0), BIT(0));
+ qcom_branch_set_clk_en(regmap, 0x48004); /* GCC_CPUSS_GNOC_CLK */
+ qcom_branch_set_clk_en(regmap, 0x0b004); /* GCC_VIDEO_AHB_CLK */
+ qcom_branch_set_clk_en(regmap, 0x0b008); /* GCC_CAMERA_AHB_CLK */
+ qcom_branch_set_clk_en(regmap, 0x0b00c); /* GCC_DISP_AHB_CLK */
+ qcom_branch_set_clk_en(regmap, 0x0b02c); /* GCC_CAMERA_XO_CLK */
+ qcom_branch_set_clk_en(regmap, 0x0b028); /* GCC_VIDEO_XO_CLK */
+ qcom_branch_set_clk_en(regmap, 0x0b030); /* GCC_DISP_XO_CLK */
+ qcom_branch_set_clk_en(regmap, 0x71004); /* GCC_GPU_CFG_AHB_CLK */
ret = qcom_cc_register_rcg_dfs(regmap, gcc_sm7150_dfs_desc,
ARRAY_SIZE(gcc_sm7150_dfs_desc));
diff --git a/drivers/clk/qcom/gcc-sm8250.c b/drivers/clk/qcom/gcc-sm8250.c
index c6c5261264f1..a8aa3f1f6373 100644
--- a/drivers/clk/qcom/gcc-sm8250.c
+++ b/drivers/clk/qcom/gcc-sm8250.c
@@ -3643,18 +3643,12 @@ static int gcc_sm8250_probe(struct platform_device *pdev)
regmap_update_bits(regmap, 0x4d110, 0x3, 0x3);
regmap_update_bits(regmap, 0x71028, 0x3, 0x3);
- /*
- * Keep the clocks always-ON
- * GCC_VIDEO_AHB_CLK, GCC_CAMERA_AHB_CLK, GCC_DISP_AHB_CLK,
- * GCC_CPUSS_DVM_BUS_CLK, GCC_GPU_CFG_AHB_CLK,
- * GCC_SYS_NOC_CPUSS_AHB_CLK
- */
- regmap_update_bits(regmap, 0x0b004, BIT(0), BIT(0));
- regmap_update_bits(regmap, 0x0b008, BIT(0), BIT(0));
- regmap_update_bits(regmap, 0x0b00c, BIT(0), BIT(0));
- regmap_update_bits(regmap, 0x4818c, BIT(0), BIT(0));
- regmap_update_bits(regmap, 0x71004, BIT(0), BIT(0));
- regmap_update_bits(regmap, 0x52000, BIT(0), BIT(0));
+ qcom_branch_set_clk_en(regmap, 0x0b004); /* GCC_VIDEO_AHB_CLK */
+ qcom_branch_set_clk_en(regmap, 0x0b008); /* GCC_CAMERA_AHB_CLK */
+ qcom_branch_set_clk_en(regmap, 0x0b00c); /* GCC_DISP_AHB_CLK */
+ qcom_branch_set_clk_en(regmap, 0x4818c); /* GCC_CPUSS_DVM_BUS_CLK */
+ qcom_branch_set_clk_en(regmap, 0x71004); /* GCC_GPU_CFG_AHB_CLK */
+ qcom_branch_set_clk_en(regmap, 0x52000); /* GCC_SYS_NOC_CPUSS_AHB_CLK */
ret = qcom_cc_register_rcg_dfs(regmap, gcc_dfs_clocks,
ARRAY_SIZE(gcc_dfs_clocks));
diff --git a/drivers/clk/qcom/gcc-sm8350.c b/drivers/clk/qcom/gcc-sm8350.c
index 1385a98eb3bb..f7e1775663f5 100644
--- a/drivers/clk/qcom/gcc-sm8350.c
+++ b/drivers/clk/qcom/gcc-sm8350.c
@@ -3806,18 +3806,13 @@ static int gcc_sm8350_probe(struct platform_device *pdev)
return PTR_ERR(regmap);
}
- /*
- * Keep the critical clock always-On
- * GCC_CAMERA_AHB_CLK, GCC_CAMERA_XO_CLK, GCC_DISP_AHB_CLK, GCC_DISP_XO_CLK,
- * GCC_GPU_CFG_AHB_CLK, GCC_VIDEO_AHB_CLK, GCC_VIDEO_XO_CLK
- */
- regmap_update_bits(regmap, 0x26004, BIT(0), BIT(0));
- regmap_update_bits(regmap, 0x26018, BIT(0), BIT(0));
- regmap_update_bits(regmap, 0x27004, BIT(0), BIT(0));
- regmap_update_bits(regmap, 0x2701c, BIT(0), BIT(0));
- regmap_update_bits(regmap, 0x71004, BIT(0), BIT(0));
- regmap_update_bits(regmap, 0x28004, BIT(0), BIT(0));
- regmap_update_bits(regmap, 0x28020, BIT(0), BIT(0));
+ qcom_branch_set_clk_en(regmap, 0x26004); /* GCC_CAMERA_AHB_CLK */
+ qcom_branch_set_clk_en(regmap, 0x26018); /* GCC_CAMERA_XO_CLK */
+ qcom_branch_set_clk_en(regmap, 0x27004); /* GCC_DISP_AHB_CLK */
+ qcom_branch_set_clk_en(regmap, 0x2701c); /* GCC_DISP_XO_CLK */
+ qcom_branch_set_clk_en(regmap, 0x71004); /* GCC_GPU_CFG_AHB_CLK */
+ qcom_branch_set_clk_en(regmap, 0x28004); /* GCC_VIDEO_AHB_CLK */
+ qcom_branch_set_clk_en(regmap, 0x28020); /* GCC_VIDEO_XO_CLK */
ret = qcom_cc_register_rcg_dfs(regmap, gcc_dfs_clocks, ARRAY_SIZE(gcc_dfs_clocks));
if (ret)
diff --git a/drivers/clk/qcom/gcc-sm8450.c b/drivers/clk/qcom/gcc-sm8450.c
index 563542982551..c9544f1bbd71 100644
--- a/drivers/clk/qcom/gcc-sm8450.c
+++ b/drivers/clk/qcom/gcc-sm8450.c
@@ -3280,19 +3280,13 @@ static int gcc_sm8450_probe(struct platform_device *pdev)
/* FORCE_MEM_CORE_ON for ufs phy ice core clocks */
regmap_update_bits(regmap, gcc_ufs_phy_ice_core_clk.halt_reg, BIT(14), BIT(14));
- /*
- * Keep the critical clock always-On
- * gcc_camera_ahb_clk, gcc_camera_xo_clk, gcc_disp_ahb_clk,
- * gcc_disp_xo_clk, gcc_gpu_cfg_ahb_clk, gcc_video_ahb_clk,
- * gcc_video_xo_clk
- */
- regmap_update_bits(regmap, 0x36004, BIT(0), BIT(0));
- regmap_update_bits(regmap, 0x36020, BIT(0), BIT(0));
- regmap_update_bits(regmap, 0x37004, BIT(0), BIT(0));
- regmap_update_bits(regmap, 0x3701c, BIT(0), BIT(0));
- regmap_update_bits(regmap, 0x81004, BIT(0), BIT(0));
- regmap_update_bits(regmap, 0x42004, BIT(0), BIT(0));
- regmap_update_bits(regmap, 0x42028, BIT(0), BIT(0));
+ qcom_branch_set_clk_en(regmap, 0x36004); /* GCC_CAMERA_AHB_CLK */
+ qcom_branch_set_clk_en(regmap, 0x36020); /* GCC_CAMERA_XO_CLK */
+ qcom_branch_set_clk_en(regmap, 0x37004); /* GCC_DISP_AHB_CLK */
+ qcom_branch_set_clk_en(regmap, 0x3701c); /* GCC_DISP_XO_CLK */
+ qcom_branch_set_clk_en(regmap, 0x81004); /* GCC_GPU_CFG_AHB_CLK */
+ qcom_branch_set_clk_en(regmap, 0x42004); /* GCC_VIDEO_AHB_CLK */
+ qcom_branch_set_clk_en(regmap, 0x42028); /* GCC_VIDEO_XO_CLK */
return qcom_cc_really_probe(pdev, &gcc_sm8450_desc, regmap);
}
diff --git a/drivers/clk/qcom/gcc-sm8550.c b/drivers/clk/qcom/gcc-sm8550.c
index 586126c4dd90..bb45bc6d72db 100644
--- a/drivers/clk/qcom/gcc-sm8550.c
+++ b/drivers/clk/qcom/gcc-sm8550.c
@@ -3344,19 +3344,13 @@ static int gcc_sm8550_probe(struct platform_device *pdev)
/* FORCE_MEM_CORE_ON for ufs phy ice core clocks */
regmap_update_bits(regmap, gcc_ufs_phy_ice_core_clk.halt_reg, BIT(14), BIT(14));
- /*
- * Keep the critical clock always-On
- * gcc_camera_ahb_clk, gcc_camera_xo_clk, gcc_disp_ahb_clk,
- * gcc_disp_xo_clk, gcc_gpu_cfg_ahb_clk, gcc_video_ahb_clk,
- * gcc_video_xo_clk
- */
- regmap_update_bits(regmap, 0x26004, BIT(0), BIT(0));
- regmap_update_bits(regmap, 0x26028, BIT(0), BIT(0));
- regmap_update_bits(regmap, 0x27004, BIT(0), BIT(0));
- regmap_update_bits(regmap, 0x27018, BIT(0), BIT(0));
- regmap_update_bits(regmap, 0x71004, BIT(0), BIT(0));
- regmap_update_bits(regmap, 0x32004, BIT(0), BIT(0));
- regmap_update_bits(regmap, 0x32030, BIT(0), BIT(0));
+ qcom_branch_set_clk_en(regmap, 0x26004); /* GCC_CAMERA_AHB_CLK */
+ qcom_branch_set_clk_en(regmap, 0x26028); /* GCC_CAMERA_XO_CLK */
+ qcom_branch_set_clk_en(regmap, 0x27004); /* GCC_DISP_AHB_CLK */
+ qcom_branch_set_clk_en(regmap, 0x27018); /* GCC_DISP_XO_CLK */
+ qcom_branch_set_clk_en(regmap, 0x71004); /* GCC_GPU_CFG_AHB_CLK */
+ qcom_branch_set_clk_en(regmap, 0x32004); /* GCC_VIDEO_AHB_CLK */
+ qcom_branch_set_clk_en(regmap, 0x32030); /* GCC_VIDEO_XO_CLK */
/* Clear GDSC_SLEEP_ENA_VOTE to stop votes being auto-removed in sleep. */
regmap_write(regmap, 0x52024, 0x0);
diff --git a/drivers/clk/qcom/gpucc-sc7280.c b/drivers/clk/qcom/gpucc-sc7280.c
index 1490cd45a654..0eeca1e9ccc1 100644
--- a/drivers/clk/qcom/gpucc-sc7280.c
+++ b/drivers/clk/qcom/gpucc-sc7280.c
@@ -457,12 +457,8 @@ static int gpu_cc_sc7280_probe(struct platform_device *pdev)
clk_lucid_pll_configure(&gpu_cc_pll1, regmap, &gpu_cc_pll1_config);
- /*
- * Keep the clocks always-ON
- * GPU_CC_CB_CLK, GPUCC_CX_GMU_CLK
- */
- regmap_update_bits(regmap, 0x1170, BIT(0), BIT(0));
- regmap_update_bits(regmap, 0x1098, BIT(0), BIT(0));
+ qcom_branch_set_clk_en(regmap, 0x1170); /* GPU_CC_CB_CLK */
+ qcom_branch_set_clk_en(regmap, 0x1098); /* GPUCC_CX_GMU_CLK */
regmap_update_bits(regmap, 0x1098, BIT(13), BIT(13));
return qcom_cc_really_probe(pdev, &gpu_cc_sc7280_desc, regmap);
diff --git a/drivers/clk/qcom/gpucc-sc8280xp.c b/drivers/clk/qcom/gpucc-sc8280xp.c
index 8e147ee294ee..55102f648a5d 100644
--- a/drivers/clk/qcom/gpucc-sc8280xp.c
+++ b/drivers/clk/qcom/gpucc-sc8280xp.c
@@ -444,12 +444,8 @@ static int gpu_cc_sc8280xp_probe(struct platform_device *pdev)
clk_lucid_pll_configure(&gpu_cc_pll0, regmap, &gpu_cc_pll0_config);
clk_lucid_pll_configure(&gpu_cc_pll1, regmap, &gpu_cc_pll1_config);
- /*
- * Keep the clocks always-ON
- * GPU_CC_CB_CLK, GPU_CC_CXO_CLK
- */
- regmap_update_bits(regmap, 0x1170, BIT(0), BIT(0));
- regmap_update_bits(regmap, 0x109c, BIT(0), BIT(0));
+ qcom_branch_set_clk_en(regmap, 0x1170); /* GPU_CC_CB_CLK */
+ qcom_branch_set_clk_en(regmap, 0x109c); /* GPU_CC_CXO_CLK */
ret = qcom_cc_really_probe(pdev, &gpu_cc_sc8280xp_desc, regmap);
pm_runtime_put(&pdev->dev);
diff --git a/drivers/clk/qcom/gpucc-sm8550.c b/drivers/clk/qcom/gpucc-sm8550.c
index 420dcb27b47d..98ecac49c1b9 100644
--- a/drivers/clk/qcom/gpucc-sm8550.c
+++ b/drivers/clk/qcom/gpucc-sm8550.c
@@ -575,13 +575,8 @@ static int gpu_cc_sm8550_probe(struct platform_device *pdev)
clk_lucid_ole_pll_configure(&gpu_cc_pll0, regmap, &gpu_cc_pll0_config);
clk_lucid_ole_pll_configure(&gpu_cc_pll1, regmap, &gpu_cc_pll1_config);
- /*
- * Keep clocks always enabled:
- * gpu_cc_cxo_aon_clk
- * gpu_cc_demet_clk
- */
- regmap_update_bits(regmap, 0x9004, BIT(0), BIT(0));
- regmap_update_bits(regmap, 0x900c, BIT(0), BIT(0));
+ qcom_branch_set_clk_en(regmap, 0x9004); /* GPU_CC_CXO_AON_CLK */
+ qcom_branch_set_clk_en(regmap, 0x900c); /* GPU_CC_DEMET_CLK */
return qcom_cc_really_probe(pdev, &gpu_cc_sm8550_desc, regmap);
}
diff --git a/drivers/clk/qcom/lpasscorecc-sc7180.c b/drivers/clk/qcom/lpasscorecc-sc7180.c
index 9051fd567112..e4c20cc4c998 100644
--- a/drivers/clk/qcom/lpasscorecc-sc7180.c
+++ b/drivers/clk/qcom/lpasscorecc-sc7180.c
@@ -401,11 +401,7 @@ static int lpass_core_cc_sc7180_probe(struct platform_device *pdev)
goto exit;
}
- /*
- * Keep the CLK always-ON
- * LPASS_AUDIO_CORE_SYSNOC_SWAY_CORE_CLK
- */
- regmap_update_bits(regmap, 0x24000, BIT(0), BIT(0));
+ qcom_branch_set_clk_en(regmap, 0x24000); /* LPASS_AUDIO_CORE_SYSNOC_SWAY_CORE_CLK */
/* PLL settings */
regmap_write(regmap, 0x1008, 0x20);
diff --git a/drivers/clk/qcom/videocc-sm8250.c b/drivers/clk/qcom/videocc-sm8250.c
index ad46c4014a40..d11a5bdf7da7 100644
--- a/drivers/clk/qcom/videocc-sm8250.c
+++ b/drivers/clk/qcom/videocc-sm8250.c
@@ -383,9 +383,8 @@ static int video_cc_sm8250_probe(struct platform_device *pdev)
clk_lucid_pll_configure(&video_pll0, regmap, &video_pll0_config);
clk_lucid_pll_configure(&video_pll1, regmap, &video_pll1_config);
- /* Keep VIDEO_CC_AHB_CLK and VIDEO_CC_XO_CLK ALWAYS-ON */
- regmap_update_bits(regmap, 0xe58, BIT(0), BIT(0));
- regmap_update_bits(regmap, 0xeec, BIT(0), BIT(0));
+ qcom_branch_set_clk_en(regmap, 0xe58); /* VIDEO_CC_AHB_CLK */
+ qcom_branch_set_clk_en(regmap, 0xeec); /* VIDEO_CC_XO_CLK */
ret = qcom_cc_really_probe(pdev, &video_cc_sm8250_desc, regmap);
diff --git a/drivers/clk/qcom/videocc-sm8350.c b/drivers/clk/qcom/videocc-sm8350.c
index 7246f3c99492..a14d6702e6c3 100644
--- a/drivers/clk/qcom/videocc-sm8350.c
+++ b/drivers/clk/qcom/videocc-sm8350.c
@@ -558,13 +558,8 @@ static int video_cc_sm8350_probe(struct platform_device *pdev)
clk_lucid_pll_configure(&video_pll0, regmap, &video_pll0_config);
clk_lucid_pll_configure(&video_pll1, regmap, &video_pll1_config);
- /*
- * Keep clocks always enabled:
- * video_cc_ahb_clk
- * video_cc_xo_clk
- */
- regmap_update_bits(regmap, 0xe58, BIT(0), BIT(0));
- regmap_update_bits(regmap, video_cc_xo_clk_cbcr, BIT(0), BIT(0));
+ qcom_branch_set_clk_en(regmap, 0xe58); /* VIDEO_CC_AHB_CLK */
+ qcom_branch_set_clk_en(regmap, video_cc_xo_clk_cbcr); /* VIDEO_CC_XO_CLK */
ret = qcom_cc_really_probe(pdev, &video_cc_sm8350_desc, regmap);
pm_runtime_put(&pdev->dev);
diff --git a/drivers/clk/qcom/videocc-sm8450.c b/drivers/clk/qcom/videocc-sm8450.c
index 16a61146e619..52a4b08ad577 100644
--- a/drivers/clk/qcom/videocc-sm8450.c
+++ b/drivers/clk/qcom/videocc-sm8450.c
@@ -423,15 +423,9 @@ static int video_cc_sm8450_probe(struct platform_device *pdev)
clk_lucid_evo_pll_configure(&video_cc_pll0, regmap, &video_cc_pll0_config);
clk_lucid_evo_pll_configure(&video_cc_pll1, regmap, &video_cc_pll1_config);
- /*
- * Keep clocks always enabled:
- * video_cc_ahb_clk
- * video_cc_sleep_clk
- * video_cc_xo_clk
- */
- regmap_update_bits(regmap, 0x80e4, BIT(0), BIT(0));
- regmap_update_bits(regmap, 0x8130, BIT(0), BIT(0));
- regmap_update_bits(regmap, 0x8114, BIT(0), BIT(0));
+ qcom_branch_set_clk_en(regmap, 0x80e4); /* VIDEO_CC_AHB_CLK */
+ qcom_branch_set_clk_en(regmap, 0x8130); /* VIDEO_CC_SLEEP_CLK */
+ qcom_branch_set_clk_en(regmap, 0x8114); /* VIDEO_CC_XO_CLK */
ret = qcom_cc_really_probe(pdev, &video_cc_sm8450_desc, regmap);
diff --git a/drivers/clk/qcom/videocc-sm8550.c b/drivers/clk/qcom/videocc-sm8550.c
index f3c9dfaee968..28747d483a30 100644
--- a/drivers/clk/qcom/videocc-sm8550.c
+++ b/drivers/clk/qcom/videocc-sm8550.c
@@ -428,15 +428,9 @@ static int video_cc_sm8550_probe(struct platform_device *pdev)
clk_lucid_ole_pll_configure(&video_cc_pll0, regmap, &video_cc_pll0_config);
clk_lucid_ole_pll_configure(&video_cc_pll1, regmap, &video_cc_pll1_config);
- /*
- * Keep clocks always enabled:
- * video_cc_ahb_clk
- * video_cc_sleep_clk
- * video_cc_xo_clk
- */
- regmap_update_bits(regmap, 0x80f4, BIT(0), BIT(0));
- regmap_update_bits(regmap, 0x8140, BIT(0), BIT(0));
- regmap_update_bits(regmap, 0x8124, BIT(0), BIT(0));
+ qcom_branch_set_clk_en(regmap, 0x80f4); /* VIDEO_CC_AHB_CLK */
+ qcom_branch_set_clk_en(regmap, 0x8140); /* VIDEO_CC_SLEEP_CLK */
+ qcom_branch_set_clk_en(regmap, 0x8124); /* VIDEO_CC_XO_CLK */
ret = qcom_cc_really_probe(pdev, &video_cc_sm8550_desc, regmap);
--
2.43.0
Some clocks need to be always-on, but we don't really do anything
with them, other than calling enable() once and telling Linux they're
enabled.
Unregister them to save a couple of bytes and, perhaps more
importantly, allow for runtime suspend of the clock controller device,
as CLK_IS_CRITICAL prevents the latter.
Signed-off-by: Konrad Dybcio <[email protected]>
---
drivers/clk/qcom/gcc-sm6115.c | 123 +++---------------------------------------
1 file changed, 8 insertions(+), 115 deletions(-)
diff --git a/drivers/clk/qcom/gcc-sm6115.c b/drivers/clk/qcom/gcc-sm6115.c
index 13e521cd4259..87a2bfe222a3 100644
--- a/drivers/clk/qcom/gcc-sm6115.c
+++ b/drivers/clk/qcom/gcc-sm6115.c
@@ -1586,36 +1586,6 @@ static struct clk_branch gcc_cam_throttle_rt_clk = {
},
};
-static struct clk_branch gcc_camera_ahb_clk = {
- .halt_reg = 0x17008,
- .halt_check = BRANCH_HALT_DELAY,
- .hwcg_reg = 0x17008,
- .hwcg_bit = 1,
- .clkr = {
- .enable_reg = 0x17008,
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_camera_ahb_clk",
- .flags = CLK_IS_CRITICAL,
- .ops = &clk_branch2_ops,
- },
- },
-};
-
-static struct clk_branch gcc_camera_xo_clk = {
- .halt_reg = 0x17028,
- .halt_check = BRANCH_HALT,
- .clkr = {
- .enable_reg = 0x17028,
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_camera_xo_clk",
- .flags = CLK_IS_CRITICAL,
- .ops = &clk_branch2_ops,
- },
- },
-};
-
static struct clk_branch gcc_camss_axi_clk = {
.halt_reg = 0x58044,
.halt_check = BRANCH_HALT,
@@ -2124,38 +2094,6 @@ static struct clk_branch gcc_cfg_noc_usb3_prim_axi_clk = {
},
};
-static struct clk_branch gcc_cpuss_gnoc_clk = {
- .halt_reg = 0x2b004,
- .halt_check = BRANCH_HALT_VOTED,
- .hwcg_reg = 0x2b004,
- .hwcg_bit = 1,
- .clkr = {
- .enable_reg = 0x79004,
- .enable_mask = BIT(22),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_cpuss_gnoc_clk",
- .flags = CLK_IS_CRITICAL,
- .ops = &clk_branch2_ops,
- },
- },
-};
-
-static struct clk_branch gcc_disp_ahb_clk = {
- .halt_reg = 0x1700c,
- .halt_check = BRANCH_HALT,
- .hwcg_reg = 0x1700c,
- .hwcg_bit = 1,
- .clkr = {
- .enable_reg = 0x1700c,
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_disp_ahb_clk",
- .flags = CLK_IS_CRITICAL,
- .ops = &clk_branch2_ops,
- },
- },
-};
-
static struct clk_regmap_div gcc_disp_gpll0_clk_src = {
.reg = 0x17058,
.shift = 0,
@@ -2215,20 +2153,6 @@ static struct clk_branch gcc_disp_throttle_core_clk = {
},
};
-static struct clk_branch gcc_disp_xo_clk = {
- .halt_reg = 0x1702c,
- .halt_check = BRANCH_HALT,
- .clkr = {
- .enable_reg = 0x1702c,
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_disp_xo_clk",
- .flags = CLK_IS_CRITICAL,
- .ops = &clk_branch2_ops,
- },
- },
-};
-
static struct clk_branch gcc_gp1_clk = {
.halt_reg = 0x4d000,
.halt_check = BRANCH_HALT,
@@ -2283,22 +2207,6 @@ static struct clk_branch gcc_gp3_clk = {
},
};
-static struct clk_branch gcc_gpu_cfg_ahb_clk = {
- .halt_reg = 0x36004,
- .halt_check = BRANCH_HALT,
- .hwcg_reg = 0x36004,
- .hwcg_bit = 1,
- .clkr = {
- .enable_reg = 0x36004,
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_gpu_cfg_ahb_clk",
- .flags = CLK_IS_CRITICAL,
- .ops = &clk_branch2_ops,
- },
- },
-};
-
static struct clk_branch gcc_gpu_gpll0_clk_src = {
.halt_check = BRANCH_HALT_DELAY,
.clkr = {
@@ -2771,22 +2679,6 @@ static struct clk_branch gcc_sdcc2_apps_clk = {
},
};
-static struct clk_branch gcc_sys_noc_cpuss_ahb_clk = {
- .halt_reg = 0x2b06c,
- .halt_check = BRANCH_HALT_VOTED,
- .hwcg_reg = 0x2b06c,
- .hwcg_bit = 1,
- .clkr = {
- .enable_reg = 0x79004,
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_sys_noc_cpuss_ahb_clk",
- .flags = CLK_IS_CRITICAL,
- .ops = &clk_branch2_ops,
- },
- },
-};
-
static struct clk_branch gcc_sys_noc_ufs_phy_axi_clk = {
.halt_reg = 0x45098,
.halt_check = BRANCH_HALT,
@@ -3272,8 +3164,6 @@ static struct clk_regmap *gcc_sm6115_clocks[] = {
[GCC_BOOT_ROM_AHB_CLK] = &gcc_boot_rom_ahb_clk.clkr,
[GCC_CAM_THROTTLE_NRT_CLK] = &gcc_cam_throttle_nrt_clk.clkr,
[GCC_CAM_THROTTLE_RT_CLK] = &gcc_cam_throttle_rt_clk.clkr,
- [GCC_CAMERA_AHB_CLK] = &gcc_camera_ahb_clk.clkr,
- [GCC_CAMERA_XO_CLK] = &gcc_camera_xo_clk.clkr,
[GCC_CAMSS_AXI_CLK] = &gcc_camss_axi_clk.clkr,
[GCC_CAMSS_AXI_CLK_SRC] = &gcc_camss_axi_clk_src.clkr,
[GCC_CAMSS_CAMNOC_ATB_CLK] = &gcc_camss_camnoc_atb_clk.clkr,
@@ -3322,20 +3212,16 @@ static struct clk_regmap *gcc_sm6115_clocks[] = {
[GCC_CAMSS_TOP_AHB_CLK] = &gcc_camss_top_ahb_clk.clkr,
[GCC_CAMSS_TOP_AHB_CLK_SRC] = &gcc_camss_top_ahb_clk_src.clkr,
[GCC_CFG_NOC_USB3_PRIM_AXI_CLK] = &gcc_cfg_noc_usb3_prim_axi_clk.clkr,
- [GCC_CPUSS_GNOC_CLK] = &gcc_cpuss_gnoc_clk.clkr,
- [GCC_DISP_AHB_CLK] = &gcc_disp_ahb_clk.clkr,
[GCC_DISP_GPLL0_CLK_SRC] = &gcc_disp_gpll0_clk_src.clkr,
[GCC_DISP_GPLL0_DIV_CLK_SRC] = &gcc_disp_gpll0_div_clk_src.clkr,
[GCC_DISP_HF_AXI_CLK] = &gcc_disp_hf_axi_clk.clkr,
[GCC_DISP_THROTTLE_CORE_CLK] = &gcc_disp_throttle_core_clk.clkr,
- [GCC_DISP_XO_CLK] = &gcc_disp_xo_clk.clkr,
[GCC_GP1_CLK] = &gcc_gp1_clk.clkr,
[GCC_GP1_CLK_SRC] = &gcc_gp1_clk_src.clkr,
[GCC_GP2_CLK] = &gcc_gp2_clk.clkr,
[GCC_GP2_CLK_SRC] = &gcc_gp2_clk_src.clkr,
[GCC_GP3_CLK] = &gcc_gp3_clk.clkr,
[GCC_GP3_CLK_SRC] = &gcc_gp3_clk_src.clkr,
- [GCC_GPU_CFG_AHB_CLK] = &gcc_gpu_cfg_ahb_clk.clkr,
[GCC_GPU_GPLL0_CLK_SRC] = &gcc_gpu_gpll0_clk_src.clkr,
[GCC_GPU_GPLL0_DIV_CLK_SRC] = &gcc_gpu_gpll0_div_clk_src.clkr,
[GCC_GPU_IREF_CLK] = &gcc_gpu_iref_clk.clkr,
@@ -3376,7 +3262,6 @@ static struct clk_regmap *gcc_sm6115_clocks[] = {
[GCC_SDCC2_AHB_CLK] = &gcc_sdcc2_ahb_clk.clkr,
[GCC_SDCC2_APPS_CLK] = &gcc_sdcc2_apps_clk.clkr,
[GCC_SDCC2_APPS_CLK_SRC] = &gcc_sdcc2_apps_clk_src.clkr,
- [GCC_SYS_NOC_CPUSS_AHB_CLK] = &gcc_sys_noc_cpuss_ahb_clk.clkr,
[GCC_SYS_NOC_UFS_PHY_AXI_CLK] = &gcc_sys_noc_ufs_phy_axi_clk.clkr,
[GCC_SYS_NOC_USB3_PRIM_AXI_CLK] = &gcc_sys_noc_usb3_prim_axi_clk.clkr,
[GCC_UFS_CLKREF_CLK] = &gcc_ufs_clkref_clk.clkr,
@@ -3513,6 +3398,14 @@ static int gcc_sm6115_probe(struct platform_device *pdev)
clk_alpha_pll_configure(&gpll10, regmap, &gpll10_config);
clk_alpha_pll_configure(&gpll11, regmap, &gpll11_config);
+ qcom_branch_set_clk_en(regmap, 0x17008); /* GCC_CAMERA_AHB_CLK */
+ qcom_branch_set_clk_en(regmap, 0x17028); /* GCC_CAMERA_XO_CLK */
+ qcom_branch_set_clk_en(regmap, 0x2b004); /* GCC_CPUSS_GNOC_CLK */
+ qcom_branch_set_clk_en(regmap, 0x1700c); /* GCC_DISP_AHB_CLK */
+ qcom_branch_set_clk_en(regmap, 0x1702c); /* GCC_DISP_XO_CLK */
+ qcom_branch_set_clk_en(regmap, 0x36004); /* GCC_GPU_CFG_AHB_CLK */
+ qcom_branch_set_clk_en(regmap, 0x2b06c); /* GCC_SYS_NOC_CPUSS_AHB_CLK */
+
return qcom_cc_really_probe(pdev, &gcc_sm6115_desc, regmap);
}
--
2.43.0
The GCC block on SM6375 is powered by the VDD_CX rail. We need to ensure
that CX is enabled to prevent unwanted power collapse and that the
reference is dropped when unused so that the system can enter a
firmware-managed lower power state.
Enable runtime PM to keep the power flowing only when necessary.
Signed-off-by: Konrad Dybcio <[email protected]>
---
drivers/clk/qcom/gcc-sm6375.c | 22 +++++++++++++++++++---
1 file changed, 19 insertions(+), 3 deletions(-)
diff --git a/drivers/clk/qcom/gcc-sm6375.c b/drivers/clk/qcom/gcc-sm6375.c
index 44c74e74885f..dff0b2f20759 100644
--- a/drivers/clk/qcom/gcc-sm6375.c
+++ b/drivers/clk/qcom/gcc-sm6375.c
@@ -8,6 +8,7 @@
#include <linux/module.h>
#include <linux/of.h>
#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
#include <linux/regmap.h>
#include <dt-bindings/clock/qcom,sm6375-gcc.h>
@@ -3785,13 +3786,25 @@ static int gcc_sm6375_probe(struct platform_device *pdev)
struct regmap *regmap;
int ret;
+ ret = devm_pm_runtime_enable(&pdev->dev);
+ if (ret)
+ return ret;
+
+ ret = pm_runtime_resume_and_get(&pdev->dev);
+ if (ret)
+ return ret;
+
regmap = qcom_cc_map(pdev, &gcc_sm6375_desc);
- if (IS_ERR(regmap))
+ if (IS_ERR(regmap)) {
+ pm_runtime_put(&pdev->dev);
return PTR_ERR(regmap);
+ }
ret = qcom_cc_register_rcg_dfs(regmap, gcc_dfs_clocks, ARRAY_SIZE(gcc_dfs_clocks));
- if (ret)
+ if (ret) {
+ pm_runtime_put(&pdev->dev);
return ret;
+ }
qcom_branch_set_clk_en(regmap, 0x17028); /* GCC_CAMERA_XO_CLK */
qcom_branch_set_clk_en(regmap, 0x2b004); /* GCC_CPUSS_GNOC_CLK */
@@ -3807,7 +3820,10 @@ static int gcc_sm6375_probe(struct platform_device *pdev)
clk_lucid_pll_configure(&gpll8, regmap, &gpll8_config);
clk_zonda_pll_configure(&gpll9, regmap, &gpll9_config);
- return qcom_cc_really_probe(pdev, &gcc_sm6375_desc, regmap);
+ ret = qcom_cc_really_probe(pdev, &gcc_sm6375_desc, regmap);
+ pm_runtime_put(&pdev->dev);
+
+ return ret;
}
static struct platform_driver gcc_sm6375_driver = {
--
2.43.0
The GCC block on SM6115 is powered by the VDD_CX rail. We need to ensure
that CX is enabled to prevent unwanted power collapse and that the
reference is dropped when unused so that the system can enter a
firmware-managed lower power state.
Enable runtime PM to keep the power flowing only when necessary.
Signed-off-by: Konrad Dybcio <[email protected]>
---
drivers/clk/qcom/gcc-sm6115.c | 22 +++++++++++++++++++---
1 file changed, 19 insertions(+), 3 deletions(-)
diff --git a/drivers/clk/qcom/gcc-sm6115.c b/drivers/clk/qcom/gcc-sm6115.c
index 87a2bfe222a3..3e0a3fd09718 100644
--- a/drivers/clk/qcom/gcc-sm6115.c
+++ b/drivers/clk/qcom/gcc-sm6115.c
@@ -9,6 +9,7 @@
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/clk-provider.h>
+#include <linux/pm_runtime.h>
#include <linux/regmap.h>
#include <linux/reset-controller.h>
@@ -3384,14 +3385,26 @@ static int gcc_sm6115_probe(struct platform_device *pdev)
struct regmap *regmap;
int ret;
+ ret = devm_pm_runtime_enable(&pdev->dev);
+ if (ret)
+ return ret;
+
+ ret = pm_runtime_resume_and_get(&pdev->dev);
+ if (ret)
+ return ret;
+
regmap = qcom_cc_map(pdev, &gcc_sm6115_desc);
- if (IS_ERR(regmap))
+ if (IS_ERR(regmap)) {
+ pm_runtime_put(&pdev->dev);
return PTR_ERR(regmap);
+ }
ret = qcom_cc_register_rcg_dfs(regmap, gcc_dfs_clocks,
ARRAY_SIZE(gcc_dfs_clocks));
- if (ret)
+ if (ret) {
+ pm_runtime_put(&pdev->dev);
return ret;
+ }
clk_alpha_pll_configure(&gpll8, regmap, &gpll8_config);
clk_alpha_pll_configure(&gpll9, regmap, &gpll9_config);
@@ -3406,7 +3419,10 @@ static int gcc_sm6115_probe(struct platform_device *pdev)
qcom_branch_set_clk_en(regmap, 0x36004); /* GCC_GPU_CFG_AHB_CLK */
qcom_branch_set_clk_en(regmap, 0x2b06c); /* GCC_SYS_NOC_CPUSS_AHB_CLK */
- return qcom_cc_really_probe(pdev, &gcc_sm6115_desc, regmap);
+ ret = qcom_cc_really_probe(pdev, &gcc_sm6115_desc, regmap);
+ pm_runtime_put(&pdev->dev);
+
+ return ret;
}
static struct platform_driver gcc_sm6115_driver = {
--
2.43.0
Some clocks need to be always-on, but we don't really do anything
with them, other than calling enable() once and telling Linux they're
enabled.
Unregister them to save a couple of bytes and, perhaps more
importantly, allow for runtime suspend of the clock controller device,
as CLK_IS_CRITICAL prevents the latter.
Reviewed-by: Bryan O'Donoghue <[email protected]>
Signed-off-by: Konrad Dybcio <[email protected]>
---
drivers/clk/qcom/gpucc-sm6375.c | 33 +++------------------------------
1 file changed, 3 insertions(+), 30 deletions(-)
diff --git a/drivers/clk/qcom/gpucc-sm6375.c b/drivers/clk/qcom/gpucc-sm6375.c
index da24276a018e..6d85936dd441 100644
--- a/drivers/clk/qcom/gpucc-sm6375.c
+++ b/drivers/clk/qcom/gpucc-sm6375.c
@@ -183,20 +183,6 @@ static struct clk_rcg2 gpucc_gx_gfx3d_clk_src = {
},
};
-static struct clk_branch gpucc_ahb_clk = {
- .halt_reg = 0x1078,
- .halt_check = BRANCH_HALT_DELAY,
- .clkr = {
- .enable_reg = 0x1078,
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gpucc_ahb_clk",
- .flags = CLK_IS_CRITICAL,
- .ops = &clk_branch2_ops,
- },
- },
-};
-
static struct clk_branch gpucc_cx_gfx3d_clk = {
.halt_reg = 0x10a4,
.halt_check = BRANCH_HALT_DELAY,
@@ -294,20 +280,6 @@ static struct clk_branch gpucc_cxo_clk = {
},
};
-static struct clk_branch gpucc_gx_cxo_clk = {
- .halt_reg = 0x1060,
- .halt_check = BRANCH_HALT_DELAY,
- .clkr = {
- .enable_reg = 0x1060,
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gpucc_gx_cxo_clk",
- .flags = CLK_IS_CRITICAL,
- .ops = &clk_branch2_ops,
- },
- },
-};
-
static struct clk_branch gpucc_gx_gfx3d_clk = {
.halt_reg = 0x1054,
.halt_check = BRANCH_HALT_DELAY,
@@ -381,7 +353,6 @@ static struct gdsc gpu_gx_gdsc = {
};
static struct clk_regmap *gpucc_sm6375_clocks[] = {
- [GPU_CC_AHB_CLK] = &gpucc_ahb_clk.clkr,
[GPU_CC_CX_GFX3D_CLK] = &gpucc_cx_gfx3d_clk.clkr,
[GPU_CC_CX_GFX3D_SLV_CLK] = &gpucc_cx_gfx3d_slv_clk.clkr,
[GPU_CC_CX_GMU_CLK] = &gpucc_cx_gmu_clk.clkr,
@@ -389,7 +360,6 @@ static struct clk_regmap *gpucc_sm6375_clocks[] = {
[GPU_CC_CXO_AON_CLK] = &gpucc_cxo_aon_clk.clkr,
[GPU_CC_CXO_CLK] = &gpucc_cxo_clk.clkr,
[GPU_CC_GMU_CLK_SRC] = &gpucc_gmu_clk_src.clkr,
- [GPU_CC_GX_CXO_CLK] = &gpucc_gx_cxo_clk.clkr,
[GPU_CC_GX_GFX3D_CLK] = &gpucc_gx_gfx3d_clk.clkr,
[GPU_CC_GX_GFX3D_CLK_SRC] = &gpucc_gx_gfx3d_clk_src.clkr,
[GPU_CC_GX_GMU_CLK] = &gpucc_gx_gmu_clk.clkr,
@@ -455,6 +425,9 @@ static int gpucc_sm6375_probe(struct platform_device *pdev)
clk_lucid_pll_configure(&gpucc_pll0, regmap, &gpucc_pll0_config);
clk_lucid_pll_configure(&gpucc_pll1, regmap, &gpucc_pll1_config);
+ qcom_branch_set_clk_en(regmap, 0x1078); /* GPUCC_AHB_CLK */
+ qcom_branch_set_clk_en(regmap, 0x1060); /* GPUCC_GX_CXO_CLK */
+
ret = qcom_cc_really_probe(pdev, &gpucc_sm6375_desc, regmap);
pm_runtime_put(&pdev->dev);
--
2.43.0
Some clocks need to be always-on, but we don't really do anything
with them, other than calling enable() once and telling Linux they're
enabled.
Unregister them to save a couple of bytes and, perhaps more
importantly, allow for runtime suspend of the clock controller device,
as CLK_IS_CRITICAL prevents the latter.
Signed-off-by: Konrad Dybcio <[email protected]>
---
drivers/clk/qcom/gpucc-sm6115.c | 33 +++------------------------------
1 file changed, 3 insertions(+), 30 deletions(-)
diff --git a/drivers/clk/qcom/gpucc-sm6115.c b/drivers/clk/qcom/gpucc-sm6115.c
index fb71c21c9a89..93a50431aef8 100644
--- a/drivers/clk/qcom/gpucc-sm6115.c
+++ b/drivers/clk/qcom/gpucc-sm6115.c
@@ -234,20 +234,6 @@ static struct clk_rcg2 gpu_cc_gx_gfx3d_clk_src = {
},
};
-static struct clk_branch gpu_cc_ahb_clk = {
- .halt_reg = 0x1078,
- .halt_check = BRANCH_HALT_DELAY,
- .clkr = {
- .enable_reg = 0x1078,
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gpu_cc_ahb_clk",
- .flags = CLK_IS_CRITICAL,
- .ops = &clk_branch2_ops,
- },
- },
-};
-
static struct clk_branch gpu_cc_crc_ahb_clk = {
.halt_reg = 0x107c,
.halt_check = BRANCH_HALT_DELAY,
@@ -336,20 +322,6 @@ static struct clk_branch gpu_cc_cxo_clk = {
},
};
-static struct clk_branch gpu_cc_gx_cxo_clk = {
- .halt_reg = 0x1060,
- .halt_check = BRANCH_HALT_DELAY,
- .clkr = {
- .enable_reg = 0x1060,
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gpu_cc_gx_cxo_clk",
- .flags = CLK_IS_CRITICAL,
- .ops = &clk_branch2_ops,
- },
- },
-};
-
static struct clk_branch gpu_cc_gx_gfx3d_clk = {
.halt_reg = 0x1054,
.halt_check = BRANCH_HALT_SKIP,
@@ -418,7 +390,6 @@ static struct gdsc gpu_gx_gdsc = {
};
static struct clk_regmap *gpu_cc_sm6115_clocks[] = {
- [GPU_CC_AHB_CLK] = &gpu_cc_ahb_clk.clkr,
[GPU_CC_CRC_AHB_CLK] = &gpu_cc_crc_ahb_clk.clkr,
[GPU_CC_CX_GFX3D_CLK] = &gpu_cc_cx_gfx3d_clk.clkr,
[GPU_CC_CX_GMU_CLK] = &gpu_cc_cx_gmu_clk.clkr,
@@ -426,7 +397,6 @@ static struct clk_regmap *gpu_cc_sm6115_clocks[] = {
[GPU_CC_CXO_AON_CLK] = &gpu_cc_cxo_aon_clk.clkr,
[GPU_CC_CXO_CLK] = &gpu_cc_cxo_clk.clkr,
[GPU_CC_GMU_CLK_SRC] = &gpu_cc_gmu_clk_src.clkr,
- [GPU_CC_GX_CXO_CLK] = &gpu_cc_gx_cxo_clk.clkr,
[GPU_CC_GX_GFX3D_CLK] = &gpu_cc_gx_gfx3d_clk.clkr,
[GPU_CC_GX_GFX3D_CLK_SRC] = &gpu_cc_gx_gfx3d_clk_src.clkr,
[GPU_CC_PLL0] = &gpu_cc_pll0.clkr,
@@ -488,6 +458,9 @@ static int gpu_cc_sm6115_probe(struct platform_device *pdev)
qcom_branch_set_force_mem_core(regmap, gpu_cc_gx_gfx3d_clk, true);
qcom_branch_set_force_periph_on(regmap, gpu_cc_gx_gfx3d_clk, true);
+ qcom_branch_set_clk_en(regmap, 0x1078); /* GPU_CC_AHB_CLK */
+ qcom_branch_set_clk_en(regmap, 0x1060); /* GPU_CC_GX_CXO_CLK */
+
return qcom_cc_really_probe(pdev, &gpu_cc_sm6115_desc, regmap);
}
--
2.43.0
The GCC block is mainly powered by VDD_CX. Describe that.
Signed-off-by: Konrad Dybcio <[email protected]>
---
arch/arm64/boot/dts/qcom/sm6375.dtsi | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm64/boot/dts/qcom/sm6375.dtsi b/arch/arm64/boot/dts/qcom/sm6375.dtsi
index 7ac8bf26dda3..f578d110f36b 100644
--- a/arch/arm64/boot/dts/qcom/sm6375.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6375.dtsi
@@ -954,6 +954,7 @@ gcc: clock-controller@1400000 {
clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
<&rpmcc RPM_SMD_XO_A_CLK_SRC>,
<&sleep_clk>;
+ power-domains = <&rpmpd SM6375_VDDCX>;
#power-domain-cells = <1>;
#clock-cells = <1>;
#reset-cells = <1>;
--
2.43.0
The GCC block is mainly powered by VDD_CX. Describe that.
Signed-off-by: Konrad Dybcio <[email protected]>
---
arch/arm64/boot/dts/qcom/qcm2290.dtsi | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm64/boot/dts/qcom/qcm2290.dtsi b/arch/arm64/boot/dts/qcom/qcm2290.dtsi
index 0911fb08ed63..51b05019ee25 100644
--- a/arch/arm64/boot/dts/qcom/qcm2290.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcm2290.dtsi
@@ -647,6 +647,7 @@ gcc: clock-controller@1400000 {
reg = <0x0 0x01400000 0x0 0x1f0000>;
clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&sleep_clk>;
clock-names = "bi_tcxo", "sleep_clk";
+ power-domains = <&rpmpd QCM2290_VDDCX>;
#clock-cells = <1>;
#reset-cells = <1>;
#power-domain-cells = <1>;
--
2.43.0
The GCC block is mainly powered by VDD_CX. Describe that.
Signed-off-by: Konrad Dybcio <[email protected]>
---
arch/arm64/boot/dts/qcom/sm6115.dtsi | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi
index 160e098f1075..30b140e1cec0 100644
--- a/arch/arm64/boot/dts/qcom/sm6115.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi
@@ -807,6 +807,7 @@ gcc: clock-controller@1400000 {
reg = <0x0 0x01400000 0x0 0x1f0000>;
clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&sleep_clk>;
clock-names = "bi_tcxo", "sleep_clk";
+ power-domains = <&rpmpd SM6115_VDDCX>;
#clock-cells = <1>;
#reset-cells = <1>;
#power-domain-cells = <1>;
--
2.43.0
Some clocks need to be always-on, but we don't really do anything
with them, other than calling enable() once and telling Linux they're
enabled.
Unregister them to save a couple of bytes and, perhaps more
importantly, allow for runtime suspend of the clock controller device,
as CLK_IS_CRITICAL prevents the latter.
Signed-off-by: Konrad Dybcio <[email protected]>
---
drivers/clk/qcom/gcc-qcm2290.c | 105 +++--------------------------------------
1 file changed, 7 insertions(+), 98 deletions(-)
diff --git a/drivers/clk/qcom/gcc-qcm2290.c b/drivers/clk/qcom/gcc-qcm2290.c
index 48995e50c6bd..cc1dd5fc6d32 100644
--- a/drivers/clk/qcom/gcc-qcm2290.c
+++ b/drivers/clk/qcom/gcc-qcm2290.c
@@ -1397,36 +1397,6 @@ static struct clk_branch gcc_cam_throttle_rt_clk = {
},
};
-static struct clk_branch gcc_camera_ahb_clk = {
- .halt_reg = 0x17008,
- .halt_check = BRANCH_HALT_DELAY,
- .hwcg_reg = 0x17008,
- .hwcg_bit = 1,
- .clkr = {
- .enable_reg = 0x17008,
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_camera_ahb_clk",
- .flags = CLK_IS_CRITICAL,
- .ops = &clk_branch2_ops,
- },
- },
-};
-
-static struct clk_branch gcc_camera_xo_clk = {
- .halt_reg = 0x17028,
- .halt_check = BRANCH_HALT,
- .clkr = {
- .enable_reg = 0x17028,
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_camera_xo_clk",
- .flags = CLK_IS_CRITICAL,
- .ops = &clk_branch2_ops,
- },
- },
-};
-
static struct clk_branch gcc_camss_axi_clk = {
.halt_reg = 0x58044,
.halt_check = BRANCH_HALT,
@@ -1825,22 +1795,6 @@ static struct clk_branch gcc_cfg_noc_usb3_prim_axi_clk = {
},
};
-static struct clk_branch gcc_disp_ahb_clk = {
- .halt_reg = 0x1700c,
- .halt_check = BRANCH_HALT,
- .hwcg_reg = 0x1700c,
- .hwcg_bit = 1,
- .clkr = {
- .enable_reg = 0x1700c,
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_disp_ahb_clk",
- .flags = CLK_IS_CRITICAL,
- .ops = &clk_branch2_ops,
- },
- },
-};
-
static struct clk_regmap_div gcc_disp_gpll0_clk_src = {
.reg = 0x17058,
.shift = 0,
@@ -1899,20 +1853,6 @@ static struct clk_branch gcc_disp_throttle_core_clk = {
},
};
-static struct clk_branch gcc_disp_xo_clk = {
- .halt_reg = 0x1702c,
- .halt_check = BRANCH_HALT,
- .clkr = {
- .enable_reg = 0x1702c,
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_disp_xo_clk",
- .flags = CLK_IS_CRITICAL,
- .ops = &clk_branch2_ops,
- },
- },
-};
-
static struct clk_branch gcc_gp1_clk = {
.halt_reg = 0x4d000,
.halt_check = BRANCH_HALT,
@@ -1964,22 +1904,6 @@ static struct clk_branch gcc_gp3_clk = {
},
};
-static struct clk_branch gcc_gpu_cfg_ahb_clk = {
- .halt_reg = 0x36004,
- .halt_check = BRANCH_HALT,
- .hwcg_reg = 0x36004,
- .hwcg_bit = 1,
- .clkr = {
- .enable_reg = 0x36004,
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_gpu_cfg_ahb_clk",
- .flags = CLK_IS_CRITICAL,
- .ops = &clk_branch2_ops,
- },
- },
-};
-
static struct clk_branch gcc_gpu_gpll0_clk_src = {
.halt_check = BRANCH_HALT_DELAY,
.clkr = {
@@ -2439,22 +2363,6 @@ static struct clk_branch gcc_sdcc2_apps_clk = {
},
};
-static struct clk_branch gcc_sys_noc_cpuss_ahb_clk = {
- .halt_reg = 0x2b06c,
- .halt_check = BRANCH_HALT_VOTED,
- .hwcg_reg = 0x2b06c,
- .hwcg_bit = 1,
- .clkr = {
- .enable_reg = 0x79004,
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_sys_noc_cpuss_ahb_clk",
- .flags = CLK_IS_CRITICAL,
- .ops = &clk_branch2_ops,
- },
- },
-};
-
static struct clk_branch gcc_sys_noc_usb3_prim_axi_clk = {
.halt_reg = 0x1a080,
.halt_check = BRANCH_HALT,
@@ -2774,8 +2682,6 @@ static struct clk_regmap *gcc_qcm2290_clocks[] = {
[GCC_BOOT_ROM_AHB_CLK] = &gcc_boot_rom_ahb_clk.clkr,
[GCC_CAM_THROTTLE_NRT_CLK] = &gcc_cam_throttle_nrt_clk.clkr,
[GCC_CAM_THROTTLE_RT_CLK] = &gcc_cam_throttle_rt_clk.clkr,
- [GCC_CAMERA_AHB_CLK] = &gcc_camera_ahb_clk.clkr,
- [GCC_CAMERA_XO_CLK] = &gcc_camera_xo_clk.clkr,
[GCC_CAMSS_AXI_CLK] = &gcc_camss_axi_clk.clkr,
[GCC_CAMSS_AXI_CLK_SRC] = &gcc_camss_axi_clk_src.clkr,
[GCC_CAMSS_CAMNOC_ATB_CLK] = &gcc_camss_camnoc_atb_clk.clkr,
@@ -2816,19 +2722,16 @@ static struct clk_regmap *gcc_qcm2290_clocks[] = {
[GCC_CAMSS_TOP_AHB_CLK] = &gcc_camss_top_ahb_clk.clkr,
[GCC_CAMSS_TOP_AHB_CLK_SRC] = &gcc_camss_top_ahb_clk_src.clkr,
[GCC_CFG_NOC_USB3_PRIM_AXI_CLK] = &gcc_cfg_noc_usb3_prim_axi_clk.clkr,
- [GCC_DISP_AHB_CLK] = &gcc_disp_ahb_clk.clkr,
[GCC_DISP_GPLL0_CLK_SRC] = &gcc_disp_gpll0_clk_src.clkr,
[GCC_DISP_GPLL0_DIV_CLK_SRC] = &gcc_disp_gpll0_div_clk_src.clkr,
[GCC_DISP_HF_AXI_CLK] = &gcc_disp_hf_axi_clk.clkr,
[GCC_DISP_THROTTLE_CORE_CLK] = &gcc_disp_throttle_core_clk.clkr,
- [GCC_DISP_XO_CLK] = &gcc_disp_xo_clk.clkr,
[GCC_GP1_CLK] = &gcc_gp1_clk.clkr,
[GCC_GP1_CLK_SRC] = &gcc_gp1_clk_src.clkr,
[GCC_GP2_CLK] = &gcc_gp2_clk.clkr,
[GCC_GP2_CLK_SRC] = &gcc_gp2_clk_src.clkr,
[GCC_GP3_CLK] = &gcc_gp3_clk.clkr,
[GCC_GP3_CLK_SRC] = &gcc_gp3_clk_src.clkr,
- [GCC_GPU_CFG_AHB_CLK] = &gcc_gpu_cfg_ahb_clk.clkr,
[GCC_GPU_GPLL0_CLK_SRC] = &gcc_gpu_gpll0_clk_src.clkr,
[GCC_GPU_GPLL0_DIV_CLK_SRC] = &gcc_gpu_gpll0_div_clk_src.clkr,
[GCC_GPU_IREF_CLK] = &gcc_gpu_iref_clk.clkr,
@@ -2869,7 +2772,6 @@ static struct clk_regmap *gcc_qcm2290_clocks[] = {
[GCC_SDCC2_AHB_CLK] = &gcc_sdcc2_ahb_clk.clkr,
[GCC_SDCC2_APPS_CLK] = &gcc_sdcc2_apps_clk.clkr,
[GCC_SDCC2_APPS_CLK_SRC] = &gcc_sdcc2_apps_clk_src.clkr,
- [GCC_SYS_NOC_CPUSS_AHB_CLK] = &gcc_sys_noc_cpuss_ahb_clk.clkr,
[GCC_SYS_NOC_USB3_PRIM_AXI_CLK] = &gcc_sys_noc_usb3_prim_axi_clk.clkr,
[GCC_USB30_PRIM_MASTER_CLK] = &gcc_usb30_prim_master_clk.clkr,
[GCC_USB30_PRIM_MASTER_CLK_SRC] = &gcc_usb30_prim_master_clk_src.clkr,
@@ -2994,6 +2896,13 @@ static int gcc_qcm2290_probe(struct platform_device *pdev)
clk_alpha_pll_configure(&gpll8, regmap, &gpll8_config);
clk_alpha_pll_configure(&gpll9, regmap, &gpll9_config);
+ qcom_branch_set_clk_en(regmap, 0x17008); /* GCC_CAMERA_AHB_CLK */
+ qcom_branch_set_clk_en(regmap, 0x17028); /* GCC_CAMERA_XO_CLK */
+ qcom_branch_set_clk_en(regmap, 0x1700c); /* GCC_DISP_AHB_CLK */
+ qcom_branch_set_clk_en(regmap, 0x1702c); /* GCC_DISP_XO_CLK */
+ qcom_branch_set_clk_en(regmap, 0x36004); /* GCC_GPU_CFG_AHB_CLK */
+ qcom_branch_set_clk_en(regmap, 0x2b06c); /* GCC_SYS_NOC_CPUSS_AHB_CLK */
+
return qcom_cc_really_probe(pdev, &gcc_qcm2290_desc, regmap);
}
--
2.43.0
The GPU_CC block is powered by VDD_CX. Link the power domain and
provide a reasonable minimum vote (lowest available on the platform)
to ensure the registers within are accessible.
Signed-off-by: Konrad Dybcio <[email protected]>
---
arch/arm64/boot/dts/qcom/sm6115.dtsi | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi
index 30b140e1cec0..ec9a74acc69c 100644
--- a/arch/arm64/boot/dts/qcom/sm6115.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi
@@ -1723,6 +1723,8 @@ gpucc: clock-controller@5990000 {
clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
<&gcc GCC_GPU_GPLL0_CLK_SRC>,
<&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
+ power-domains = <&rpmpd SM6115_VDDCX>;
+ required-opps = <&rpmpd_opp_low_svs>;
#clock-cells = <1>;
#reset-cells = <1>;
#power-domain-cells = <1>;
--
2.43.0
The GCC block on QCM2290 is powered by the VDD_CX rail. We need to
ensure that CX is enabled to prevent unwanted power collapse and that
the reference is dropped when unused so that the system can enter a
firmware-managed lower power state.
Enable runtime PM to keep the power flowing only when necessary.
Signed-off-by: Konrad Dybcio <[email protected]>
---
drivers/clk/qcom/gcc-qcm2290.c | 22 +++++++++++++++++++---
1 file changed, 19 insertions(+), 3 deletions(-)
diff --git a/drivers/clk/qcom/gcc-qcm2290.c b/drivers/clk/qcom/gcc-qcm2290.c
index cc1dd5fc6d32..0992da84a741 100644
--- a/drivers/clk/qcom/gcc-qcm2290.c
+++ b/drivers/clk/qcom/gcc-qcm2290.c
@@ -8,6 +8,7 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
#include <linux/regmap.h>
#include <dt-bindings/clock/qcom,gcc-qcm2290.h>
@@ -2882,14 +2883,26 @@ static int gcc_qcm2290_probe(struct platform_device *pdev)
struct regmap *regmap;
int ret;
+ ret = devm_pm_runtime_enable(&pdev->dev);
+ if (ret)
+ return ret;
+
+ ret = pm_runtime_resume_and_get(&pdev->dev);
+ if (ret)
+ return ret;
+
regmap = qcom_cc_map(pdev, &gcc_qcm2290_desc);
- if (IS_ERR(regmap))
+ if (IS_ERR(regmap)) {
+ pm_runtime_put(&pdev->dev);
return PTR_ERR(regmap);
+ }
ret = qcom_cc_register_rcg_dfs(regmap, gcc_dfs_clocks,
ARRAY_SIZE(gcc_dfs_clocks));
- if (ret)
+ if (ret) {
+ pm_runtime_put(&pdev->dev);
return ret;
+ }
clk_alpha_pll_configure(&gpll10, regmap, &gpll10_config);
clk_alpha_pll_configure(&gpll11, regmap, &gpll11_config);
@@ -2903,7 +2916,10 @@ static int gcc_qcm2290_probe(struct platform_device *pdev)
qcom_branch_set_clk_en(regmap, 0x36004); /* GCC_GPU_CFG_AHB_CLK */
qcom_branch_set_clk_en(regmap, 0x2b06c); /* GCC_SYS_NOC_CPUSS_AHB_CLK */
- return qcom_cc_really_probe(pdev, &gcc_qcm2290_desc, regmap);
+ ret = qcom_cc_really_probe(pdev, &gcc_qcm2290_desc, regmap);
+ pm_runtime_put(&pdev->dev);
+
+ return ret;
}
static struct platform_driver gcc_qcm2290_driver = {
--
2.43.0
Some clocks need to be always-on, but we don't really do anything
with them, other than calling enable() once and telling Linux they're
enabled.
Unregister them to save a couple of bytes and, perhaps more
importantly, allow for runtime suspend of the clock controller device,
as CLK_IS_CRITICAL prevents the latter.
Signed-off-by: Konrad Dybcio <[email protected]>
---
drivers/clk/qcom/gcc-sm6375.c | 94 +++----------------------------------------
1 file changed, 5 insertions(+), 89 deletions(-)
diff --git a/drivers/clk/qcom/gcc-sm6375.c b/drivers/clk/qcom/gcc-sm6375.c
index fe1a004c259d..44c74e74885f 100644
--- a/drivers/clk/qcom/gcc-sm6375.c
+++ b/drivers/clk/qcom/gcc-sm6375.c
@@ -1743,22 +1743,6 @@ static struct clk_branch gcc_cam_throttle_rt_clk = {
},
};
-static struct clk_branch gcc_camera_ahb_clk = {
- .halt_reg = 0x17008,
- .halt_check = BRANCH_HALT_DELAY,
- .hwcg_reg = 0x17008,
- .hwcg_bit = 1,
- .clkr = {
- .enable_reg = 0x17008,
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_camera_ahb_clk",
- .flags = CLK_IS_CRITICAL,
- .ops = &clk_branch2_ops,
- },
- },
-};
-
static struct clk_branch gcc_camss_axi_clk = {
.halt_reg = 0x58044,
.halt_check = BRANCH_HALT,
@@ -2309,22 +2293,6 @@ static struct clk_branch gcc_cfg_noc_usb3_prim_axi_clk = {
},
};
-static struct clk_branch gcc_disp_ahb_clk = {
- .halt_reg = 0x1700c,
- .halt_check = BRANCH_HALT_VOTED,
- .hwcg_reg = 0x1700c,
- .hwcg_bit = 1,
- .clkr = {
- .enable_reg = 0x1700c,
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_disp_ahb_clk",
- .flags = CLK_IS_CRITICAL,
- .ops = &clk_branch2_ops,
- },
- },
-};
-
static struct clk_regmap_div gcc_disp_gpll0_clk_src = {
.reg = 0x17058,
.shift = 0,
@@ -2455,22 +2423,6 @@ static struct clk_branch gcc_gp3_clk = {
},
};
-static struct clk_branch gcc_gpu_cfg_ahb_clk = {
- .halt_reg = 0x36004,
- .halt_check = BRANCH_HALT_VOTED,
- .hwcg_reg = 0x36004,
- .hwcg_bit = 1,
- .clkr = {
- .enable_reg = 0x36004,
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_gpu_cfg_ahb_clk",
- .flags = CLK_IS_CRITICAL,
- .ops = &clk_branch2_ops,
- },
- },
-};
-
static struct clk_branch gcc_gpu_gpll0_clk_src = {
.halt_check = BRANCH_HALT_DELAY,
.clkr = {
@@ -3094,26 +3046,6 @@ static struct clk_branch gcc_sdcc2_apps_clk = {
},
};
-static struct clk_branch gcc_sys_noc_cpuss_ahb_clk = {
- .halt_reg = 0x2b06c,
- .halt_check = BRANCH_HALT_VOTED,
- .hwcg_reg = 0x2b06c,
- .hwcg_bit = 1,
- .clkr = {
- .enable_reg = 0x79004,
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_sys_noc_cpuss_ahb_clk",
- .parent_hws = (const struct clk_hw*[]) {
- &gcc_cpuss_ahb_postdiv_clk_src.clkr.hw,
- },
- .num_parents = 1,
- .flags = CLK_IS_CRITICAL | CLK_SET_RATE_PARENT,
- .ops = &clk_branch2_ops,
- },
- },
-};
-
static struct clk_branch gcc_sys_noc_ufs_phy_axi_clk = {
.halt_reg = 0x45098,
.halt_check = BRANCH_HALT,
@@ -3433,22 +3365,6 @@ static struct clk_branch gcc_venus_ctl_axi_clk = {
},
};
-static struct clk_branch gcc_video_ahb_clk = {
- .halt_reg = 0x17004,
- .halt_check = BRANCH_HALT_DELAY,
- .hwcg_reg = 0x17004,
- .hwcg_bit = 1,
- .clkr = {
- .enable_reg = 0x17004,
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_video_ahb_clk",
- .flags = CLK_IS_CRITICAL,
- .ops = &clk_branch2_ops,
- },
- },
-};
-
static struct clk_branch gcc_video_axi0_clk = {
.halt_reg = 0x1701c,
.halt_check = BRANCH_HALT_VOTED,
@@ -3615,7 +3531,6 @@ static struct clk_regmap *gcc_sm6375_clocks[] = {
[GCC_BOOT_ROM_AHB_CLK] = &gcc_boot_rom_ahb_clk.clkr,
[GCC_CAM_THROTTLE_NRT_CLK] = &gcc_cam_throttle_nrt_clk.clkr,
[GCC_CAM_THROTTLE_RT_CLK] = &gcc_cam_throttle_rt_clk.clkr,
- [GCC_CAMERA_AHB_CLK] = &gcc_camera_ahb_clk.clkr,
[GCC_CAMSS_AXI_CLK] = &gcc_camss_axi_clk.clkr,
[GCC_CAMSS_AXI_CLK_SRC] = &gcc_camss_axi_clk_src.clkr,
[GCC_CAMSS_CCI_0_CLK] = &gcc_camss_cci_0_clk.clkr,
@@ -3671,7 +3586,6 @@ static struct clk_regmap *gcc_sm6375_clocks[] = {
[GCC_CFG_NOC_USB3_PRIM_AXI_CLK] = &gcc_cfg_noc_usb3_prim_axi_clk.clkr,
[GCC_CPUSS_AHB_CLK_SRC] = &gcc_cpuss_ahb_clk_src.clkr,
[GCC_CPUSS_AHB_POSTDIV_CLK_SRC] = &gcc_cpuss_ahb_postdiv_clk_src.clkr,
- [GCC_DISP_AHB_CLK] = &gcc_disp_ahb_clk.clkr,
[GCC_DISP_GPLL0_CLK_SRC] = &gcc_disp_gpll0_clk_src.clkr,
[GCC_DISP_GPLL0_DIV_CLK_SRC] = &gcc_disp_gpll0_div_clk_src.clkr,
[GCC_DISP_HF_AXI_CLK] = &gcc_disp_hf_axi_clk.clkr,
@@ -3683,7 +3597,6 @@ static struct clk_regmap *gcc_sm6375_clocks[] = {
[GCC_GP2_CLK_SRC] = &gcc_gp2_clk_src.clkr,
[GCC_GP3_CLK] = &gcc_gp3_clk.clkr,
[GCC_GP3_CLK_SRC] = &gcc_gp3_clk_src.clkr,
- [GCC_GPU_CFG_AHB_CLK] = &gcc_gpu_cfg_ahb_clk.clkr,
[GCC_GPU_GPLL0_CLK_SRC] = &gcc_gpu_gpll0_clk_src.clkr,
[GCC_GPU_GPLL0_DIV_CLK_SRC] = &gcc_gpu_gpll0_div_clk_src.clkr,
[GCC_GPU_MEMNOC_GFX_CLK] = &gcc_gpu_memnoc_gfx_clk.clkr,
@@ -3739,7 +3652,6 @@ static struct clk_regmap *gcc_sm6375_clocks[] = {
[GCC_SDCC2_AHB_CLK] = &gcc_sdcc2_ahb_clk.clkr,
[GCC_SDCC2_APPS_CLK] = &gcc_sdcc2_apps_clk.clkr,
[GCC_SDCC2_APPS_CLK_SRC] = &gcc_sdcc2_apps_clk_src.clkr,
- [GCC_SYS_NOC_CPUSS_AHB_CLK] = &gcc_sys_noc_cpuss_ahb_clk.clkr,
[GCC_SYS_NOC_UFS_PHY_AXI_CLK] = &gcc_sys_noc_ufs_phy_axi_clk.clkr,
[GCC_SYS_NOC_USB3_PRIM_AXI_CLK] = &gcc_sys_noc_usb3_prim_axi_clk.clkr,
[GCC_UFS_PHY_AHB_CLK] = &gcc_ufs_phy_ahb_clk.clkr,
@@ -3766,7 +3678,6 @@ static struct clk_regmap *gcc_sm6375_clocks[] = {
[GCC_VCODEC0_AXI_CLK] = &gcc_vcodec0_axi_clk.clkr,
[GCC_VENUS_AHB_CLK] = &gcc_venus_ahb_clk.clkr,
[GCC_VENUS_CTL_AXI_CLK] = &gcc_venus_ctl_axi_clk.clkr,
- [GCC_VIDEO_AHB_CLK] = &gcc_video_ahb_clk.clkr,
[GCC_VIDEO_AXI0_CLK] = &gcc_video_axi0_clk.clkr,
[GCC_VIDEO_THROTTLE_CORE_CLK] = &gcc_video_throttle_core_clk.clkr,
[GCC_VIDEO_VCODEC0_SYS_CLK] = &gcc_video_vcodec0_sys_clk.clkr,
@@ -3885,6 +3796,11 @@ static int gcc_sm6375_probe(struct platform_device *pdev)
qcom_branch_set_clk_en(regmap, 0x17028); /* GCC_CAMERA_XO_CLK */
qcom_branch_set_clk_en(regmap, 0x2b004); /* GCC_CPUSS_GNOC_CLK */
qcom_branch_set_clk_en(regmap, 0x1702c); /* GCC_DISP_XO_CLK */
+ qcom_branch_set_clk_en(regmap, 0x17008); /* GCC_CAMERA_AHB_CLK */
+ qcom_branch_set_clk_en(regmap, 0x1700c); /* GCC_DISP_AHB_CLK */
+ qcom_branch_set_clk_en(regmap, 0x36004); /* GCC_GPU_CFG_AHB_CLK */
+ qcom_branch_set_clk_en(regmap, 0x79004); /* GCC_SYS_NOC_CPUSS_AHB_CLK */
+ qcom_branch_set_clk_en(regmap, 0x17004); /* GCC_VIDEO_AHB_CLK */
clk_lucid_pll_configure(&gpll10, regmap, &gpll10_config);
clk_lucid_pll_configure(&gpll11, regmap, &gpll11_config);
--
2.43.0
On Wed, Dec 20, 2023 at 01:30:43AM +0100, Konrad Dybcio wrote:
> Instead of magically poking at the bit0 of branch clocks' CBCR, use
> the newly introduced helper.
>
> Reviewed-by: Bryan O'Donoghue <[email protected]>
> Signed-off-by: Konrad Dybcio <[email protected]>
> diff --git a/drivers/clk/qcom/gcc-sc8280xp.c b/drivers/clk/qcom/gcc-sc8280xp.c
> index bfb77931e868..1ba78990b9f4 100644
> --- a/drivers/clk/qcom/gcc-sc8280xp.c
> +++ b/drivers/clk/qcom/gcc-sc8280xp.c
> @@ -7543,21 +7543,15 @@ static int gcc_sc8280xp_probe(struct platform_device *pdev)
> goto err_put_rpm;
> }
>
> - /*
> - * Keep the clocks always-ON
I think you should keep this part of the comment in some form
throughout, for example:
/* Keep some clocks always on */
qcom_branch_set_clk_en(...);
...
> - * GCC_CAMERA_AHB_CLK, GCC_CAMERA_XO_CLK, GCC_DISP_AHB_CLK,
> - * GCC_DISP_XO_CLK, GCC_GPU_CFG_AHB_CLK, GCC_VIDEO_AHB_CLK,
> - * GCC_VIDEO_XO_CLK, GCC_DISP1_AHB_CLK, GCC_DISP1_XO_CLK
> - */
> - regmap_update_bits(regmap, 0x26004, BIT(0), BIT(0));
> - regmap_update_bits(regmap, 0x26020, BIT(0), BIT(0));
> - regmap_update_bits(regmap, 0x27004, BIT(0), BIT(0));
> - regmap_update_bits(regmap, 0x27028, BIT(0), BIT(0));
> - regmap_update_bits(regmap, 0x71004, BIT(0), BIT(0));
> - regmap_update_bits(regmap, 0x28004, BIT(0), BIT(0));
> - regmap_update_bits(regmap, 0x28028, BIT(0), BIT(0));
> - regmap_update_bits(regmap, 0xbb004, BIT(0), BIT(0));
> - regmap_update_bits(regmap, 0xbb028, BIT(0), BIT(0));
> + qcom_branch_set_clk_en(regmap, 0x26004); /* GCC_CAMERA_AHB_CLK */
> + qcom_branch_set_clk_en(regmap, 0x26020); /* GCC_CAMERA_XO_CLK */
> + qcom_branch_set_clk_en(regmap, 0x27004); /* GCC_DISP_AHB_CLK */
> + qcom_branch_set_clk_en(regmap, 0x27028); /* GCC_DISP_XO_CLK */
> + qcom_branch_set_clk_en(regmap, 0x71004); /* GCC_GPU_CFG_AHB_CLK */
> + qcom_branch_set_clk_en(regmap, 0x28004); /* GCC_VIDEO_AHB_CLK */
> + qcom_branch_set_clk_en(regmap, 0x28028); /* GCC_VIDEO_XO_CLK */
> + qcom_branch_set_clk_en(regmap, 0xbb004); /* GCC_DISP1_AHB_CLK */
> + qcom_branch_set_clk_en(regmap, 0xbb028); /* GCC_DISP1_XO_CLK */
>
> ret = qcom_cc_register_rcg_dfs(regmap, gcc_dfs_clocks, ARRAY_SIZE(gcc_dfs_clocks));
> if (ret)
Johan
On Wed, Dec 20, 2023 at 01:30:45AM +0100, Konrad Dybcio wrote:
> The GCC block on SM6375 is powered by the VDD_CX rail. We need to ensure
> that CX is enabled to prevent unwanted power collapse
As I pointed out earlier, this bit of the commit message is incorrect
and misleading as the power domain will never be disabled until you
enable runtime PM as part of this very patch:
https://lore.kernel.org/all/[email protected]/
Specifically, genpd will not power off CX (at runtime) while the driver
is bound when runtime PM is left disabled.
> and that the
> reference is dropped when unused so that the system can enter a
> firmware-managed lower power state.
>
> Enable runtime PM to keep the power flowing only when necessary.
The rest is correct.
Johan
On 20.12.2023 09:25, Johan Hovold wrote:
> On Wed, Dec 20, 2023 at 01:30:43AM +0100, Konrad Dybcio wrote:
>> Instead of magically poking at the bit0 of branch clocks' CBCR, use
>> the newly introduced helper.
>>
>> Reviewed-by: Bryan O'Donoghue <[email protected]>
>> Signed-off-by: Konrad Dybcio <[email protected]>
>
>> diff --git a/drivers/clk/qcom/gcc-sc8280xp.c b/drivers/clk/qcom/gcc-sc8280xp.c
>> index bfb77931e868..1ba78990b9f4 100644
>> --- a/drivers/clk/qcom/gcc-sc8280xp.c
>> +++ b/drivers/clk/qcom/gcc-sc8280xp.c
>> @@ -7543,21 +7543,15 @@ static int gcc_sc8280xp_probe(struct platform_device *pdev)
>> goto err_put_rpm;
>> }
>>
>> - /*
>> - * Keep the clocks always-ON
>
> I think you should keep this part of the comment in some form
> throughout, for example:
>
> /* Keep some clocks always on */
> qcom_branch_set_clk_en(...);
> ...
That's a good idea, it may not be entirely obvious for first-time
readers. I'll include this.
Konrad
On 20.12.2023 10:26, Johan Hovold wrote:
> On Wed, Dec 20, 2023 at 01:30:45AM +0100, Konrad Dybcio wrote:
>> The GCC block on SM6375 is powered by the VDD_CX rail. We need to ensure
>> that CX is enabled to prevent unwanted power collapse
>
> As I pointed out earlier, this bit of the commit message is incorrect
> and misleading as the power domain will never be disabled until you
> enable runtime PM as part of this very patch:
>
> https://lore.kernel.org/all/[email protected]/
>
> Specifically, genpd will not power off CX (at runtime) while the driver
> is bound when runtime PM is left disabled.
OK I only now see what you really meant.
What this bit says is true, but it may be confusing within the context
of this patch.
The CX domain must be turned on [for the SoC to function], however this
patch does not solve the issue of it being powered down [like you've said
just binding the PD will keep it always-active for RPM-disabled devices].
It complements this process, by allowing it to shut down when unnecessary.
>
>> and that the
>> reference is dropped when unused so that the system can enter a
>> firmware-managed lower power state.
>>
>> Enable runtime PM to keep the power flowing only when necessary.
>
> The rest is correct.
Let me try to reword this and see if you like it:
The GCC block on SM6375 is powered by the VDD_CX rail. The Device Tree
description of this dependency lets Linux keep the rail online to prevent
power outages. It is however undesirable to keep it enabled at all times,
as that consumes additional power.
Moreover, failing to drop the "enabled" vote prevents firmware-managed,
SoC-wide power collapse in suspend, which leads to even more wasted power.
Enable runtime PM to keep the power flowing only when necessary.
Konrad
On Wed, Dec 20, 2023 at 01:26:55PM +0100, Konrad Dybcio wrote:
> On 20.12.2023 10:26, Johan Hovold wrote:
> > On Wed, Dec 20, 2023 at 01:30:45AM +0100, Konrad Dybcio wrote:
> >> The GCC block on SM6375 is powered by the VDD_CX rail. We need to ensure
> >> that CX is enabled to prevent unwanted power collapse
> >
> > As I pointed out earlier, this bit of the commit message is incorrect
> > and misleading as the power domain will never be disabled until you
> > enable runtime PM as part of this very patch:
> >
> > https://lore.kernel.org/all/[email protected]/
> >
> > Specifically, genpd will not power off CX (at runtime) while the driver
> > is bound when runtime PM is left disabled.
> OK I only now see what you really meant.
>
> What this bit says is true, but it may be confusing within the context
> of this patch.
I'd say it's misleading since it suggests that something can currently
cause an "unwanted power collapse" which is not the case.
> The CX domain must be turned on [for the SoC to function], however this
> patch does not solve the issue of it being powered down [like you've said
> just binding the PD will keep it always-active for RPM-disabled devices].
> It complements this process, by allowing it to shut down when unnecessary.
Right, so just skip the misleading bits about "unwanted power collapse".
> >> and that the
> >> reference is dropped when unused so that the system can enter a
> >> firmware-managed lower power state.
> >>
> >> Enable runtime PM to keep the power flowing only when necessary.
> >
> > The rest is correct.
> Let me try to reword this and see if you like it:
>
>
> The GCC block on SM6375 is powered by the VDD_CX rail. The Device Tree
> description of this dependency lets Linux keep the rail online to prevent
> power outages. It is however undesirable to keep it enabled at all times,
> as that consumes additional power.
I'd skip or rephrase the second sentence myself.
> Moreover, failing to drop the "enabled" vote prevents firmware-managed,
> SoC-wide power collapse in suspend, which leads to even more wasted power.
However if this is what you meant by "firmware-managed lower power
state" then this is not correct either. genpd will still power off the
power domain during system suspend, regardless of whether a driver
implements runtime PM.
> Enable runtime PM to keep the power flowing only when necessary.
So I'm starting to question whether we need this at all. AFAIK CX is
never going to be disabled at runtime and this patch is not needed to
disable CX during system suspend.
Johan
On 20.12.2023 13:48, Johan Hovold wrote:
> On Wed, Dec 20, 2023 at 01:26:55PM +0100, Konrad Dybcio wrote:
>> On 20.12.2023 10:26, Johan Hovold wrote:
>>> On Wed, Dec 20, 2023 at 01:30:45AM +0100, Konrad Dybcio wrote:
>>>> The GCC block on SM6375 is powered by the VDD_CX rail. We need to ensure
>>>> that CX is enabled to prevent unwanted power collapse
>>>
>>> As I pointed out earlier, this bit of the commit message is incorrect
>>> and misleading as the power domain will never be disabled until you
>>> enable runtime PM as part of this very patch:
>>>
>>> https://lore.kernel.org/all/[email protected]/
>>>
>>> Specifically, genpd will not power off CX (at runtime) while the driver
>>> is bound when runtime PM is left disabled.
>
>> OK I only now see what you really meant.
>>
>> What this bit says is true, but it may be confusing within the context
>> of this patch.
>
> I'd say it's misleading since it suggests that something can currently
> cause an "unwanted power collapse" which is not the case.
>
>> The CX domain must be turned on [for the SoC to function], however this
>> patch does not solve the issue of it being powered down [like you've said
>> just binding the PD will keep it always-active for RPM-disabled devices].
>> It complements this process, by allowing it to shut down when unnecessary.
>
> Right, so just skip the misleading bits about "unwanted power collapse".
>
>>>> and that the
>>>> reference is dropped when unused so that the system can enter a
>>>> firmware-managed lower power state.
>>>>
>>>> Enable runtime PM to keep the power flowing only when necessary.
>>>
>>> The rest is correct.
>
>> Let me try to reword this and see if you like it:
>>
>>
>> The GCC block on SM6375 is powered by the VDD_CX rail. The Device Tree
>> description of this dependency lets Linux keep the rail online to prevent
>> power outages. It is however undesirable to keep it enabled at all times,
>> as that consumes additional power.
>
> I'd skip or rephrase the second sentence myself.
>
>> Moreover, failing to drop the "enabled" vote prevents firmware-managed,
>> SoC-wide power collapse in suspend, which leads to even more wasted power.
>
> However if this is what you meant by "firmware-managed lower power
> state" then this is not correct either. genpd will still power off the
> power domain during system suspend, regardless of whether a driver
> implements runtime PM.
Hm, right, I'm confusing runtime and system suspend in this message..
>
>> Enable runtime PM to keep the power flowing only when necessary.
>
> So I'm starting to question whether we need this at all. AFAIK CX is
> never going to be disabled at runtime and this patch is not needed to
> disable CX during system suspend.
After a bit of reconsideration, I think it would still be useful in
rare circumstances, i.e. when all of the peripherals are runtime
suspended, but at least one consumer that doesn't depend on GCC isn't
(some remote procs, venus on some platforms).
Remoteprocs actually directly tap into RPM/RPMh themselves, so that
may not be necessary, but with Venus I'm not sure.. Then again, running
Venus without e.g. GCC-dependent storage seems counter-intuitive.
Then I suppose adding RPM to GCC may not be necessary after all (at
least on platforms that don't use any different collapsible power
domains).. As opposed to disp/gpu/whatever_cc which usually come with
either a different domain, or a hefty required-opp and aren't required
to be on 24/7
One last concern I have is, AFAICU currently CX is assumed by Linux
to be the parent domain of all GDSCs within GCC (which is not true,
but that's a separate topic). Can the PM core cope with properly
dropping CX votes that are propagated up the chain?
i.e. take this excerpt from sc8280xp.dtsi:
// usb_0: usb@a6f8800
power-domains = <&gcc USB30_PRIM_GDSC>;
required-opps = <&rpmhpd_opp_nom>;
will runtime suspending USB drop the NOM (val = 256) vote from CX
if runtime PM is disabled for GCC? I may be totally mixing up
genpd, OPP and RPM, but to my defense it's not particularly hard
to do so :D
Konrad