On some SoCs (like the SM6115 / SM4250 SoC), the enable bit inside
'tcsr_check_reg' needs to be set first to 'enable' EUD mode.
So introduce a vendor-specific dt-property 'qcom,secure-eud-reg'
which specifies the base address of the TCSR reg space and the offset
of the 'tcsr_check_reg'.
Signed-off-by: Bhupesh Sharma <[email protected]>
---
Documentation/devicetree/bindings/soc/qcom/qcom,eud.yaml | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,eud.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,eud.yaml
index f2c5ec7e6437b..ca38d219e57d5 100644
--- a/Documentation/devicetree/bindings/soc/qcom/qcom,eud.yaml
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,eud.yaml
@@ -45,6 +45,14 @@ properties:
$ref: /schemas/graph.yaml#/properties/port
description: This port is to be attached to the type C connector.
+ qcom,secure-eud-reg:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ items:
+ - items:
+ - description: phandle to TCSR hardware block
+ - description: offset of the secure mode manager register
+ description: TCSR hardware block
+
required:
- compatible
- reg
--
2.38.1
On 18/07/2023 08:10, Bhupesh Sharma wrote:
> On some SoCs (like the SM6115 / SM4250 SoC), the enable bit inside
> 'tcsr_check_reg' needs to be set first to 'enable' EUD mode.
>
> So introduce a vendor-specific dt-property 'qcom,secure-eud-reg'
> which specifies the base address of the TCSR reg space and the offset
> of the 'tcsr_check_reg'.
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Best regards,
Krzysztof