From: Arnd Bergmann <[email protected]>
The dummycon default console size used to be determined by architecture,
but now this is a Kconfig setting on everything except ARM. Tracing this
back in the historic git trees, this was used to match the size of VGA
console or VGA framebuffer on early machines, but nowadays that code is
no longer used, except probably on the old footbridge/netwinder since
that is the only one that supports vgacon.
On machines with a framebuffer, booting with DT so far results in always
using the hardcoded 80x30 size in dummycon, while on ATAGS the setting
can come from a bootloader specific override. Both seem to be worse
choices than the Kconfig setting, since the actual text size for fbcon
also depends on the selected font.
Make this work the same way as everywhere else and use the normal
Kconfig setting, except for the footbridge with vgacon, which keeps
using the traditional code. If vgacon is disabled, footbridge can
also ignore the setting. This means the screen_info only has to be
provided when either vgacon or EFI are enabled now.
To limit the amount of surprises on Arm, change the Kconfig default
to the previously used 80x30 setting instead of the usual 80x25.
Reviewed-by: Thomas Zimmermann <[email protected]>
Tested-by: Linus Walleij <[email protected]>
Reviewed-by: Javier Martinez Canillas <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
---
arch/arm/kernel/atags_parse.c | 2 +-
arch/arm/kernel/setup.c | 3 +--
drivers/video/console/Kconfig | 5 +++--
drivers/video/console/dummycon.c | 2 +-
4 files changed, 6 insertions(+), 6 deletions(-)
diff --git a/arch/arm/kernel/atags_parse.c b/arch/arm/kernel/atags_parse.c
index 33f6eb5213a5a..4c815da3b77b0 100644
--- a/arch/arm/kernel/atags_parse.c
+++ b/arch/arm/kernel/atags_parse.c
@@ -69,7 +69,7 @@ static int __init parse_tag_mem32(const struct tag *tag)
__tagtable(ATAG_MEM, parse_tag_mem32);
-#if defined(CONFIG_VGA_CONSOLE) || defined(CONFIG_DUMMY_CONSOLE)
+#if defined(CONFIG_ARCH_FOOTBRIDGE) && defined(CONFIG_VGA_CONSOLE)
static int __init parse_tag_videotext(const struct tag *tag)
{
screen_info.orig_x = tag->u.videotext.x;
diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
index c66b560562b30..40326a35a179b 100644
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -928,8 +928,7 @@ static void __init request_standard_resources(const struct machine_desc *mdesc)
request_resource(&ioport_resource, &lp2);
}
-#if defined(CONFIG_VGA_CONSOLE) || defined(CONFIG_DUMMY_CONSOLE) || \
- defined(CONFIG_EFI)
+#if defined(CONFIG_VGA_CONSOLE) || defined(CONFIG_EFI)
struct screen_info screen_info = {
.orig_video_lines = 30,
.orig_video_cols = 80,
diff --git a/drivers/video/console/Kconfig b/drivers/video/console/Kconfig
index 6af90db6d2da9..b575cf54174af 100644
--- a/drivers/video/console/Kconfig
+++ b/drivers/video/console/Kconfig
@@ -52,7 +52,7 @@ config DUMMY_CONSOLE
config DUMMY_CONSOLE_COLUMNS
int "Initial number of console screen columns"
- depends on DUMMY_CONSOLE && !ARM
+ depends on DUMMY_CONSOLE && !ARCH_FOOTBRIDGE
default 160 if PARISC
default 80
help
@@ -62,8 +62,9 @@ config DUMMY_CONSOLE_COLUMNS
config DUMMY_CONSOLE_ROWS
int "Initial number of console screen rows"
- depends on DUMMY_CONSOLE && !ARM
+ depends on DUMMY_CONSOLE && !ARCH_FOOTBRIDGE
default 64 if PARISC
+ default 30 if ARM
default 25
help
On PA-RISC, the default value is 64, which should fit a 1280x1024
diff --git a/drivers/video/console/dummycon.c b/drivers/video/console/dummycon.c
index f1711b2f9ff05..70549fecee12c 100644
--- a/drivers/video/console/dummycon.c
+++ b/drivers/video/console/dummycon.c
@@ -18,7 +18,7 @@
* Dummy console driver
*/
-#if defined(__arm__)
+#if defined(CONFIG_ARCH_FOOTBRIDGE) && defined(CONFIG_VGA_CONSOLE)
#define DUMMY_COLUMNS screen_info.orig_video_cols
#define DUMMY_ROWS screen_info.orig_video_lines
#else
--
2.39.2