Currently, we do not check the return status of the pause command,
immediately after we load firmware. If the pause has failed,
the firmware is not running.
Signed-off-by: Stefan Binding <[email protected]>
---
sound/pci/hda/cs35l41_hda.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/sound/pci/hda/cs35l41_hda.c b/sound/pci/hda/cs35l41_hda.c
index f9c97270db6f6..29f1dce45f1dc 100644
--- a/sound/pci/hda/cs35l41_hda.c
+++ b/sound/pci/hda/cs35l41_hda.c
@@ -781,7 +781,12 @@ static int cs35l41_smart_amp(struct cs35l41_hda *cs35l41)
goto clean_dsp;
}
- cs35l41_set_cspl_mbox_cmd(cs35l41->dev, cs35l41->regmap, CSPL_MBOX_CMD_PAUSE);
+ ret = cs35l41_set_cspl_mbox_cmd(cs35l41->dev, cs35l41->regmap, CSPL_MBOX_CMD_PAUSE);
+ if (ret) {
+ dev_err(cs35l41->dev, "Error waiting for DSP to pause: %u\n", ret);
+ goto clean_dsp;
+ }
+
cs35l41->firmware_running = true;
return 0;
--
2.34.1