IPQ5332 uses tsens v2.3.3 IP and it is having combined interrupt.
It does not have RPM and kernel needs to take care of sensor
enablement, calibration. Hence introduced new feature_config,
ops and data for IPQ5332.
Signed-off-by: Praveenkumar I <[email protected]>
---
[v5]:
No changes.
[v4]:
No changes.
[v3]:
No changes.
[v2]:
Added tsens_features for ipq5332 with VER_2_X_NO_RPM. Used
hw_ids to mention the available sensors. Dropped v2 in
ops_ipq5332.
drivers/thermal/qcom/tsens-v2.c | 25 +++++++++++++++++++++++++
drivers/thermal/qcom/tsens.c | 3 +++
drivers/thermal/qcom/tsens.h | 2 +-
3 files changed, 29 insertions(+), 1 deletion(-)
diff --git a/drivers/thermal/qcom/tsens-v2.c b/drivers/thermal/qcom/tsens-v2.c
index 7190e477b173..512839597ac6 100644
--- a/drivers/thermal/qcom/tsens-v2.c
+++ b/drivers/thermal/qcom/tsens-v2.c
@@ -69,6 +69,17 @@ static struct tsens_features ipq8074_feat = {
.trip_max_temp = 204000,
};
+static struct tsens_features ipq5332_feat = {
+ .ver_major = VER_2_X_NO_RPM,
+ .crit_int = 1,
+ .combo_int = 1,
+ .adc = 0,
+ .srot_split = 1,
+ .max_sensors = 16,
+ .trip_min_temp = 0,
+ .trip_max_temp = 204000,
+};
+
static const struct reg_field tsens_v2_regfields[MAX_REGFIELDS] = {
/* ----- SROT ------ */
/* VERSION */
@@ -270,6 +281,20 @@ struct tsens_plat_data data_ipq8074 = {
.fields = tsens_v2_regfields,
};
+static const struct tsens_ops ops_ipq5332 = {
+ .init = init_tsens_v2_no_rpm,
+ .get_temp = get_temp_tsens_valid,
+ .calibrate = tsens_v2_calibration,
+};
+
+struct tsens_plat_data data_ipq5332 = {
+ .num_sensors = 5,
+ .ops = &ops_ipq5332,
+ .hw_ids = (unsigned int []){11, 12, 13, 14, 15},
+ .feat = &ipq5332_feat,
+ .fields = tsens_v2_regfields,
+};
+
/* Kept around for backward compatibility with old msm8996.dtsi */
struct tsens_plat_data data_8996 = {
.num_sensors = 13,
diff --git a/drivers/thermal/qcom/tsens.c b/drivers/thermal/qcom/tsens.c
index 9dc0c2150948..af58a94628a8 100644
--- a/drivers/thermal/qcom/tsens.c
+++ b/drivers/thermal/qcom/tsens.c
@@ -1106,6 +1106,9 @@ static const struct of_device_id tsens_table[] = {
}, {
.compatible = "qcom,ipq8074-tsens",
.data = &data_ipq8074,
+ }, {
+ .compatible = "qcom,ipq5332-tsens",
+ .data = &data_ipq5332,
}, {
.compatible = "qcom,mdm9607-tsens",
.data = &data_9607,
diff --git a/drivers/thermal/qcom/tsens.h b/drivers/thermal/qcom/tsens.h
index b2e8f0f2b466..1dde363914cd 100644
--- a/drivers/thermal/qcom/tsens.h
+++ b/drivers/thermal/qcom/tsens.h
@@ -648,6 +648,6 @@ extern struct tsens_plat_data data_8226, data_8909, data_8916, data_8939, data_8
extern struct tsens_plat_data data_tsens_v1, data_8976, data_8956;
/* TSENS v2 targets */
-extern struct tsens_plat_data data_8996, data_ipq8074, data_tsens_v2;
+extern struct tsens_plat_data data_8996, data_ipq8074, data_ipq5332, data_tsens_v2;
#endif /* __QCOM_TSENS_H__ */
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project