Reuse pcie_aer_is_native() to determine the native AER ownership.
Signed-off-by: Smita Koralahalli <[email protected]>
---
v2:
Replaced pcie_aer_is_native() at a later stage for automated
backports.
---
drivers/cxl/pci.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/cxl/pci.c b/drivers/cxl/pci.c
index 2323169b6e5f..44a21ab7add5 100644
--- a/drivers/cxl/pci.c
+++ b/drivers/cxl/pci.c
@@ -529,7 +529,6 @@ static int cxl_pci_setup_regs(struct pci_dev *pdev, enum cxl_regloc_type type,
static int cxl_pci_ras_unmask(struct pci_dev *pdev)
{
- struct pci_host_bridge *host_bridge = pci_find_host_bridge(pdev->bus);
struct cxl_dev_state *cxlds = pci_get_drvdata(pdev);
void __iomem *addr;
u32 orig_val, val, mask;
@@ -542,7 +541,7 @@ static int cxl_pci_ras_unmask(struct pci_dev *pdev)
}
/* BIOS has PCIe AER error control */
- if (!host_bridge->native_aer)
+ if (!pcie_aer_is_native(pdev))
return 0;
rc = pcie_capability_read_word(pdev, PCI_EXP_DEVCTL, &cap);
--
2.17.1
On 7/21/23 2:47 PM, Smita Koralahalli wrote:
> Reuse pcie_aer_is_native() to determine the native AER ownership.
Although it is straightforward, IMO, the commit log should include
few words about *why* you are making this change.
For example, usage of host_bride->native_aer does not cover command
line override of AER ownership. So use pcie_aer_is_native() to
determine the ownership.
With that fixed,
Reviewed-by: Kuppuswamy Sathyanarayanan <[email protected]>
>
> Signed-off-by: Smita Koralahalli <[email protected]>
> ---
> v2:
> Replaced pcie_aer_is_native() at a later stage for automated
> backports.
> ---
> drivers/cxl/pci.c | 3 +--
> 1 file changed, 1 insertion(+), 2 deletions(-)
>
> diff --git a/drivers/cxl/pci.c b/drivers/cxl/pci.c
> index 2323169b6e5f..44a21ab7add5 100644
> --- a/drivers/cxl/pci.c
> +++ b/drivers/cxl/pci.c
> @@ -529,7 +529,6 @@ static int cxl_pci_setup_regs(struct pci_dev *pdev, enum cxl_regloc_type type,
>
> static int cxl_pci_ras_unmask(struct pci_dev *pdev)
> {
> - struct pci_host_bridge *host_bridge = pci_find_host_bridge(pdev->bus);
> struct cxl_dev_state *cxlds = pci_get_drvdata(pdev);
> void __iomem *addr;
> u32 orig_val, val, mask;
> @@ -542,7 +541,7 @@ static int cxl_pci_ras_unmask(struct pci_dev *pdev)
> }
>
> /* BIOS has PCIe AER error control */
> - if (!host_bridge->native_aer)
> + if (!pcie_aer_is_native(pdev))
> return 0;
>
> rc = pcie_capability_read_word(pdev, PCI_EXP_DEVCTL, &cap);
--
Sathyanarayanan Kuppuswamy
Linux Kernel Developer
On 21.07.23 21:47:40, Smita Koralahalli wrote:
> Reuse pcie_aer_is_native() to determine the native AER ownership.
>
> Signed-off-by: Smita Koralahalli <[email protected]>
With Sathyanarayanan comments addressed:
Reviewed-by: Robert Richter <[email protected]>
> ---
> v2:
> Replaced pcie_aer_is_native() at a later stage for automated
> backports.
> ---
> drivers/cxl/pci.c | 3 +--
> 1 file changed, 1 insertion(+), 2 deletions(-)
>
> diff --git a/drivers/cxl/pci.c b/drivers/cxl/pci.c
> index 2323169b6e5f..44a21ab7add5 100644
> --- a/drivers/cxl/pci.c
> +++ b/drivers/cxl/pci.c
> @@ -529,7 +529,6 @@ static int cxl_pci_setup_regs(struct pci_dev *pdev, enum cxl_regloc_type type,
>
> static int cxl_pci_ras_unmask(struct pci_dev *pdev)
> {
> - struct pci_host_bridge *host_bridge = pci_find_host_bridge(pdev->bus);
> struct cxl_dev_state *cxlds = pci_get_drvdata(pdev);
> void __iomem *addr;
> u32 orig_val, val, mask;
> @@ -542,7 +541,7 @@ static int cxl_pci_ras_unmask(struct pci_dev *pdev)
> }
>
> /* BIOS has PCIe AER error control */
> - if (!host_bridge->native_aer)
> + if (!pcie_aer_is_native(pdev))
> return 0;
>
> rc = pcie_capability_read_word(pdev, PCI_EXP_DEVCTL, &cap);
> --
> 2.17.1
>
Smita Koralahalli wrote:
> Reuse pcie_aer_is_native() to determine the native AER ownership.
Looks good.