This dts adds support for BQ Aquaris M5 (Longcheer L9100) released in
2015.
Add a device tree with initial support for:
- GPIO keys
- Hall sensor
- SDHCI
- WCNSS (BT/WIFI)
- Accelerometer/Magnetometer
- Vibrator
- Touchscreen
- Front flash
Signed-off-by: André Apitzsch <[email protected]>
---
André Apitzsch (2):
dt-bindings: arm: qcom: Add BQ Aquaris M5
arm64: dts: qcom: msm8939-longcheer-l9100: Add initial device tree
Documentation/devicetree/bindings/arm/qcom.yaml | 1 +
arch/arm64/boot/dts/qcom/Makefile | 1 +
.../boot/dts/qcom/msm8939-longcheer-l9100.dts | 340 +++++++++++++++++++++
3 files changed, 342 insertions(+)
---
base-commit: 4d2c646ac07cf4a35ef1c4a935a1a4fd6c6b1a36
change-id: 20230724-bq_m5-bc9afe378f8d
Best regards,
--
André Apitzsch <[email protected]>
Add a compatible for BQ Aquaris M5 (Longcheer L9100).
Signed-off-by: André Apitzsch <[email protected]>
---
Documentation/devicetree/bindings/arm/qcom.yaml | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml
index a6f7ef4f0830..66f660dd5026 100644
--- a/Documentation/devicetree/bindings/arm/qcom.yaml
+++ b/Documentation/devicetree/bindings/arm/qcom.yaml
@@ -186,6 +186,7 @@ properties:
- items:
- enum:
+ - longcheer,l9100
- samsung,a7
- sony,kanuti-tulip
- square,apq8039-t2
--
2.41.0
This dts adds support for BQ Aquaris M5 (Longcheer L9100) released in
2015.
Add a device tree with initial support for:
- GPIO keys
- Hall sensor
- SDHCI
- WCNSS (BT/WIFI)
- Accelerometer/Magnetometer
- Vibrator
- Touchscreen
- Front flash
Signed-off-by: André Apitzsch <[email protected]>
---
arch/arm64/boot/dts/qcom/Makefile | 1 +
.../boot/dts/qcom/msm8939-longcheer-l9100.dts | 340 +++++++++++++++++++++
2 files changed, 341 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 23fd31d4bf5a..3200bc92853f 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -39,6 +39,7 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8916-thwc-uf896.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8916-thwc-ufi001c.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8916-wingtech-wt88047.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8916-yiming-uz801v3.dtb
+dtb-$(CONFIG_ARCH_QCOM) += msm8939-longcheer-l9100.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8939-samsung-a7.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8939-sony-xperia-kanuti-tulip.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8953-motorola-potter.dtb
diff --git a/arch/arm64/boot/dts/qcom/msm8939-longcheer-l9100.dts b/arch/arm64/boot/dts/qcom/msm8939-longcheer-l9100.dts
new file mode 100644
index 000000000000..74782e323a2c
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8939-longcheer-l9100.dts
@@ -0,0 +1,340 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+/dts-v1/;
+
+#include "msm8939-pm8916.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/qcom,pmic-mpp.h>
+
+/ {
+ model = "BQ Aquaris M5 (Longcheer L9100)";
+ compatible = "longcheer,l9100", "qcom,msm8939";
+ chassis-type = "handset";
+
+ aliases {
+ mmc0 = &sdhc_1; /* eMMC */
+ mmc1 = &sdhc_2; /* SD card */
+ serial0 = &blsp_uart2;
+ };
+
+ chosen {
+ stdout-path = "serial0";
+ };
+
+ gpio-hall-sensor {
+ compatible = "gpio-keys";
+
+ pinctrl-0 = <&gpio_hall_sensor_default>;
+ pinctrl-names = "default";
+
+ label = "GPIO Hall Effect Sensor";
+
+ event-hall-sensor {
+ label = "Hall Effect Sensor";
+ gpios = <&tlmm 20 GPIO_ACTIVE_LOW>;
+ linux,input-type = <EV_SW>;
+ linux,code = <SW_LID>;
+ linux,can-disable;
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ pinctrl-0 = <&gpio_keys_default>;
+ pinctrl-names = "default";
+
+ label = "GPIO Buttons";
+
+ button-volume-up {
+ label = "Volume Up";
+ gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEUP>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led-0 {
+ gpios = <&tlmm 17 GPIO_ACTIVE_HIGH>;
+ color = <LED_COLOR_ID_WHITE>;
+ default-state = "off";
+ function = LED_FUNCTION_KBD_BACKLIGHT;
+
+ pinctrl-0 = <&button_backlight_default>;
+ pinctrl-names = "default";
+ };
+ };
+
+ reg_ts_vdd: regulator-vdd-ts {
+ compatible = "regulator-fixed";
+ regulator-name = "regulator-vdd-ts";
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+
+ gpio = <&tlmm 78 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-0 = <&ts_vdd_default>;
+ pinctrl-names = "default";
+ };
+
+ backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pm8916_pwm 0 100000>;
+ brightness-levels = <0 255>;
+ num-interpolated-steps = <255>;
+ default-brightness-level = <128>;
+ enable-gpios = <&tlmm 98 GPIO_ACTIVE_HIGH>;
+
+ pinctrl-0 = <&lcd_bl_en_default>;
+ pinctrl-names = "default";
+ };
+
+ flash-led-controller {
+ compatible = "ocs,ocp8110";
+ flash-gpios = <&tlmm 8 GPIO_ACTIVE_HIGH>;
+ enable-gpios = <&tlmm 49 GPIO_ACTIVE_HIGH>;
+
+ pinctrl-0 = <&camera_front_flash_default>;
+ pinctrl-names = "default";
+
+ led {
+ function = LED_FUNCTION_FLASH;
+ color = <LED_COLOR_ID_WHITE>;
+ flash-max-timeout-us = <250000>;
+ };
+ };
+
+ usb_id: usb-id {
+ compatible = "linux,extcon-usb-gpio";
+ id-gpio = <&tlmm 110 GPIO_ACTIVE_HIGH>;
+ pinctrl-0 = <&usb_id_default &usb_id_switch_default>;
+ pinctrl-names = "default";
+ };
+
+};
+
+&blsp_i2c3 {
+ status = "okay";
+
+ magnetometer@d {
+ compatible = "asahi-kasei,ak09911";
+ reg = <0x0d>;
+
+ vdd-supply = <&pm8916_l17>;
+ vid-supply = <&pm8916_l6>;
+
+ reset-gpios = <&tlmm 68 GPIO_ACTIVE_HIGH>;
+
+ pinctrl-0 = <&mag_reset_default>;
+ pinctrl-names = "default";
+ };
+
+ light-sensor@23 {
+ compatible = "liteon,ltr559";
+ reg = <0x23>;
+
+ vdd-supply = <&pm8916_l17>;
+ vddio-supply = <&pm8916_l5>;
+
+ interrupt-parent = <&tlmm>;
+ interrupts = <113 IRQ_TYPE_EDGE_FALLING>;
+
+ pinctrl-0 = <&light_int_default>;
+ pinctrl-names = "default";
+ };
+
+ imu@68 {
+ compatible = "bosch,bmi160";
+ reg = <0x68>;
+
+ vdd-supply = <&pm8916_l17>;
+ vddio-supply = <&pm8916_l6>;
+ };
+};
+
+&blsp_i2c5 {
+ status = "okay";
+
+ touchscreen@4a {
+ compatible = "atmel,maxtouch";
+ reg = <0x4a>;
+
+ interrupt-parent = <&tlmm>;
+ interrupts = <13 IRQ_TYPE_LEVEL_LOW>;
+
+ reset-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>;
+
+ vdda-supply = <&pm8916_l6>;
+ vdd-supply = <®_ts_vdd>;
+
+ pinctrl-0 = <&ts_int_reset_default>;
+ pinctrl-names = "default";
+
+ /* Keys listed from right to left */
+ linux,keycodes = <KEY_APPSELECT KEY_HOMEPAGE KEY_BACK>;
+ };
+};
+
+&blsp_uart2 {
+ status = "okay";
+};
+
+&mdss {
+ status = "okay";
+};
+
+&pm8916_pwm {
+ pinctrl-0 = <&pwm_out>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&pm8916_resin {
+ linux,code = <KEY_VOLUMEDOWN>;
+ status = "okay";
+};
+
+&pm8916_vib {
+ status = "okay";
+};
+
+&sdhc_1 {
+ status = "okay";
+};
+
+&sdhc_2 {
+ pinctrl-0 = <&sdc2_default &sdc2_cd_default>;
+ pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>;
+ pinctrl-names = "default", "sleep";
+
+ cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
+
+ status = "okay";
+};
+
+&usb {
+ extcon = <&usb_id>, <&usb_id>;
+ status = "okay";
+};
+
+&usb_hs_phy {
+ extcon = <&usb_id>;
+};
+
+&wcnss {
+ status = "okay";
+};
+
+&wcnss_iris {
+ compatible = "qcom,wcn3620";
+};
+
+&pm8916_rpm_regulators {
+ pm8916_l17: l17 {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ };
+};
+
+&tlmm {
+ button_backlight_default: button-backlight-default-state {
+ pins = "gpio17";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ camera_front_flash_default: camera-front-flash-default-state {
+ pins = "gpio8", "gpio49";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ gpio_hall_sensor_default: gpio-hall-sensor-default-state {
+ pins = "gpio20";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ gpio_keys_default: gpio-keys-default-state {
+ pins = "gpio107";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ lcd_bl_en_default: lcd-bl-en-default-state {
+ pins = "gpio98";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ light_int_default: light-int-default-state {
+ pins = "gpio113";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ mag_reset_default: mag-reset-default-state {
+ pins = "gpio68";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ sdc2_cd_default: sdc2-cd-default-state {
+ pins = "gpio38";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ ts_int_reset_default: ts-int-reset-default-state {
+ pins = "gpio12", "gpio13";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ ts_vdd_default: ts-vdd-default-state {
+ pins = "gpio78";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ usb_id_default: usb-id-default-state {
+ pins = "gpio110";
+ function = "gpio";
+ drive-strength = <8>;
+ bias-pull-up;
+ };
+
+ usb_id_switch_default: usb-id-switch-default-state {
+ pins = "gpio121";
+ function = "gpio";
+ drive-strength = <2>;
+ output-high;
+ };
+};
+
+&pm8916_mpps {
+ pwm_out: mpp4-state {
+ pins = "mpp4";
+ function = "digital";
+ power-source = <PM8916_MPP_VPH>;
+ output-low;
+ qcom,dtest = <1>;
+ };
+};
--
2.41.0
On 24/07/2023 22:52, André Apitzsch wrote:
> Add a compatible for BQ Aquaris M5 (Longcheer L9100).
>
> Signed-off-by: André Apitzsch <[email protected]>
> ---
> Documentation/devicetree/bindings/arm/qcom.yaml | 1 +
> 1 file changed, 1 insertion(+)
Reviewed-by: Krzysztof Kozlowski <[email protected]>
---
This is an automated instruction, just in case, because many review tags
are being ignored. If you do not know the process, here is a short
explanation:
Please add Acked-by/Reviewed-by/Tested-by tags when posting new
versions, under or above your Signed-off-by tag. Tag is "received", when
provided in a message replied to you on the mailing list. Tools like b4
can help here. However, there's no need to repost patches *only* to add
the tags. The upstream maintainer will do that for acks received on the
version they apply.
https://elixir.bootlin.com/linux/v5.17/source/Documentation/process/submitting-patches.rst#L540
Best regards,
Krzysztof
On 24/07/2023 22:52, André Apitzsch wrote:
> This dts adds support for BQ Aquaris M5 (Longcheer L9100) released in
> 2015.
>
> Add a device tree with initial support for:
>
...
> +&usb_hs_phy {
> + extcon = <&usb_id>;
> +};
> +
> +&wcnss {
> + status = "okay";
> +};
> +
> +&wcnss_iris {
> + compatible = "qcom,wcn3620";
> +};
> +
> +&pm8916_rpm_regulators {
> + pm8916_l17: l17 {
> + regulator-min-microvolt = <2850000>;
> + regulator-max-microvolt = <2850000>;
> + };
> +};
> +
> +&tlmm {
Please sort all node extends/overrides by name.
Best regards,
Krzysztof
On 25.07.2023 07:46, Krzysztof Kozlowski wrote:
> On 24/07/2023 22:52, André Apitzsch wrote:
>> Add a compatible for BQ Aquaris M5 (Longcheer L9100).
>>
>> Signed-off-by: André Apitzsch <[email protected]>
>> ---
>> Documentation/devicetree/bindings/arm/qcom.yaml | 1 +
>> 1 file changed, 1 insertion(+)
>
>
> Reviewed-by: Krzysztof Kozlowski <[email protected]>
>
>
> ---
>
> This is an automated instruction, just in case, because many review tags
> are being ignored. If you do not know the process, here is a short
> explanation:
>
> Please add Acked-by/Reviewed-by/Tested-by tags when posting new
> versions, under or above your Signed-off-by tag. Tag is "received", when
> provided in a message replied to you on the mailing list. Tools like b4
> can help here. However, there's no need to repost patches *only* to add
> the tags. The upstream maintainer will do that for acks received on the
> version they apply.
>
> https://elixir.bootlin.com/linux/v5.17/source/Documentation/process/submitting-patches.rst#L540
Krzysztof, update your bot to paste this link with s/v5.17/latest/g
Konrad
On Mon, Jul 24, 2023 at 10:52:42PM +0200, Andr? Apitzsch wrote:
> This dts adds support for BQ Aquaris M5 (Longcheer L9100) released in
> 2015.
>
> Add a device tree with initial support for:
>
> - GPIO keys
> - Hall sensor
> - SDHCI
> - WCNSS (BT/WIFI)
> - Accelerometer/Magnetometer
> - Vibrator
> - Touchscreen
> - Front flash
>
> Signed-off-by: Andr? Apitzsch <[email protected]>
> ---
> arch/arm64/boot/dts/qcom/Makefile | 1 +
> .../boot/dts/qcom/msm8939-longcheer-l9100.dts | 340 +++++++++++++++++++++
> 2 files changed, 341 insertions(+)
>
> [...]
> diff --git a/arch/arm64/boot/dts/qcom/msm8939-longcheer-l9100.dts b/arch/arm64/boot/dts/qcom/msm8939-longcheer-l9100.dts
> new file mode 100644
> index 000000000000..74782e323a2c
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/msm8939-longcheer-l9100.dts
> @@ -0,0 +1,340 @@
> [...]
> +
> + usb_id: usb-id {
> + compatible = "linux,extcon-usb-gpio";
> + id-gpio = <&tlmm 110 GPIO_ACTIVE_HIGH>;
id-gpios, to avoid conflict with
https://lore.kernel.org/linux-arm-msm/[email protected]/
> + pinctrl-0 = <&usb_id_default &usb_id_switch_default>;
> + pinctrl-names = "default";
> + };
> +
> +};
> [...]
> +
> +&mdss {
> + status = "okay";
> +};
> +
I'd introduce this together with the display support.
Thanks,
Stephan
On 25/07/2023 10:13, Konrad Dybcio wrote:
> On 25.07.2023 07:46, Krzysztof Kozlowski wrote:
>> On 24/07/2023 22:52, André Apitzsch wrote:
>>> Add a compatible for BQ Aquaris M5 (Longcheer L9100).
>>>
>>> Signed-off-by: André Apitzsch <[email protected]>
>>> ---
>>> Documentation/devicetree/bindings/arm/qcom.yaml | 1 +
>>> 1 file changed, 1 insertion(+)
>>
>>
>> Reviewed-by: Krzysztof Kozlowski <[email protected]>
>>
>>
>> ---
>>
>> This is an automated instruction, just in case, because many review tags
>> are being ignored. If you do not know the process, here is a short
>> explanation:
>>
>> Please add Acked-by/Reviewed-by/Tested-by tags when posting new
>> versions, under or above your Signed-off-by tag. Tag is "received", when
>> provided in a message replied to you on the mailing list. Tools like b4
>> can help here. However, there's no need to repost patches *only* to add
>> the tags. The upstream maintainer will do that for acks received on the
>> version they apply.
>>
>> https://elixir.bootlin.com/linux/v5.17/source/Documentation/process/submitting-patches.rst#L540
> Krzysztof, update your bot to paste this link with s/v5.17/latest/g
Is there any difference? :) I would need to update links in all my
templates and re-check the links...
Best regards,
Krzysztof
On 25.07.2023 11:43, Krzysztof Kozlowski wrote:
> On 25/07/2023 10:13, Konrad Dybcio wrote:
>> On 25.07.2023 07:46, Krzysztof Kozlowski wrote:
>>> On 24/07/2023 22:52, André Apitzsch wrote:
>>>> Add a compatible for BQ Aquaris M5 (Longcheer L9100).
>>>>
>>>> Signed-off-by: André Apitzsch <[email protected]>
>>>> ---
>>>> Documentation/devicetree/bindings/arm/qcom.yaml | 1 +
>>>> 1 file changed, 1 insertion(+)
>>>
>>>
>>> Reviewed-by: Krzysztof Kozlowski <[email protected]>
>>>
>>>
>>> ---
>>>
>>> This is an automated instruction, just in case, because many review tags
>>> are being ignored. If you do not know the process, here is a short
>>> explanation:
>>>
>>> Please add Acked-by/Reviewed-by/Tested-by tags when posting new
>>> versions, under or above your Signed-off-by tag. Tag is "received", when
>>> provided in a message replied to you on the mailing list. Tools like b4
>>> can help here. However, there's no need to repost patches *only* to add
>>> the tags. The upstream maintainer will do that for acks received on the
>>> version they apply.
>>>
>>> https://elixir.bootlin.com/linux/v5.17/source/Documentation/process/submitting-patches.rst#L540
>> Krzysztof, update your bot to paste this link with s/v5.17/latest/g
>
> Is there any difference? :) I would need to update links in all my
> templates and re-check the links...
Don't know, but the keyword "latest" in the link always points to the..
latest available release
Konrad
On 25/07/2023 12:03, Konrad Dybcio wrote:
> On 25.07.2023 11:43, Krzysztof Kozlowski wrote:
>> On 25/07/2023 10:13, Konrad Dybcio wrote:
>>> On 25.07.2023 07:46, Krzysztof Kozlowski wrote:
>>>> On 24/07/2023 22:52, André Apitzsch wrote:
>>>>> Add a compatible for BQ Aquaris M5 (Longcheer L9100).
>>>>>
>>>>> Signed-off-by: André Apitzsch <[email protected]>
>>>>> ---
>>>>> Documentation/devicetree/bindings/arm/qcom.yaml | 1 +
>>>>> 1 file changed, 1 insertion(+)
>>>>
>>>>
>>>> Reviewed-by: Krzysztof Kozlowski <[email protected]>
>>>>
>>>>
>>>> ---
>>>>
>>>> This is an automated instruction, just in case, because many review tags
>>>> are being ignored. If you do not know the process, here is a short
>>>> explanation:
>>>>
>>>> Please add Acked-by/Reviewed-by/Tested-by tags when posting new
>>>> versions, under or above your Signed-off-by tag. Tag is "received", when
>>>> provided in a message replied to you on the mailing list. Tools like b4
>>>> can help here. However, there's no need to repost patches *only* to add
>>>> the tags. The upstream maintainer will do that for acks received on the
>>>> version they apply.
>>>>
>>>> https://elixir.bootlin.com/linux/v5.17/source/Documentation/process/submitting-patches.rst#L540
>>> Krzysztof, update your bot to paste this link with s/v5.17/latest/g
>>
>> Is there any difference? :) I would need to update links in all my
>> templates and re-check the links...
> Don't know, but the keyword "latest" in the link always points to the..
> latest available release
And how do you update the line marker in "latest" version, so it points
to exact line I want? I could switch to latest kernel doc and point to
chapters, but then not to specific lines.
Best regards,
Krzysztof
On 26.07.2023 09:34, Krzysztof Kozlowski wrote:
> On 25/07/2023 12:03, Konrad Dybcio wrote:
>> On 25.07.2023 11:43, Krzysztof Kozlowski wrote:
>>> On 25/07/2023 10:13, Konrad Dybcio wrote:
>>>> On 25.07.2023 07:46, Krzysztof Kozlowski wrote:
>>>>> On 24/07/2023 22:52, André Apitzsch wrote:
>>>>>> Add a compatible for BQ Aquaris M5 (Longcheer L9100).
>>>>>>
>>>>>> Signed-off-by: André Apitzsch <[email protected]>
>>>>>> ---
>>>>>> Documentation/devicetree/bindings/arm/qcom.yaml | 1 +
>>>>>> 1 file changed, 1 insertion(+)
>>>>>
>>>>>
>>>>> Reviewed-by: Krzysztof Kozlowski <[email protected]>
>>>>>
>>>>>
>>>>> ---
>>>>>
>>>>> This is an automated instruction, just in case, because many review tags
>>>>> are being ignored. If you do not know the process, here is a short
>>>>> explanation:
>>>>>
>>>>> Please add Acked-by/Reviewed-by/Tested-by tags when posting new
>>>>> versions, under or above your Signed-off-by tag. Tag is "received", when
>>>>> provided in a message replied to you on the mailing list. Tools like b4
>>>>> can help here. However, there's no need to repost patches *only* to add
>>>>> the tags. The upstream maintainer will do that for acks received on the
>>>>> version they apply.
>>>>>
>>>>> https://elixir.bootlin.com/linux/v5.17/source/Documentation/process/submitting-patches.rst#L540
>>>> Krzysztof, update your bot to paste this link with s/v5.17/latest/g
>>>
>>> Is there any difference? :) I would need to update links in all my
>>> templates and re-check the links...
>> Don't know, but the keyword "latest" in the link always points to the..
>> latest available release
>
> And how do you update the line marker in "latest" version, so it points
> to exact line I want? I could switch to latest kernel doc and point to
> chapters, but then not to specific lines.
Hm, right. Didn't think about that.
Konrad
Hi!
> This dts adds support for BQ Aquaris M5 (Longcheer L9100) released in
> 2015.
Thanks for the patches. Please cc [email protected] with
phone patches.
Best regards,
Pavel
--
People of Russia, stop Putin before his war on Ukraine escalates.