2023-07-24 08:26:08

by Max Filippov

[permalink] [raw]
Subject: [PATCH] xtensa: PMU: fix base address for the newer hardware

With introduction of ERI access control in RG.0 base address of the PMU
unit registers has changed. Add support for the new PMU configuration.

Cc: [email protected]
Signed-off-by: Max Filippov <[email protected]>
---
arch/xtensa/include/asm/core.h | 9 +++++++++
arch/xtensa/kernel/perf_event.c | 17 +++++++++++++----
2 files changed, 22 insertions(+), 4 deletions(-)

diff --git a/arch/xtensa/include/asm/core.h b/arch/xtensa/include/asm/core.h
index 0e1bb6f019d6..3f5ffae89b58 100644
--- a/arch/xtensa/include/asm/core.h
+++ b/arch/xtensa/include/asm/core.h
@@ -52,4 +52,13 @@
#define XTENSA_STACK_ALIGNMENT 16
#endif

+#ifndef XCHAL_HW_MIN_VERSION
+#if defined(XCHAL_HW_MIN_VERSION_MAJOR) && defined(XCHAL_HW_MIN_VERSION_MINOR)
+#define XCHAL_HW_MIN_VERSION (XCHAL_HW_MIN_VERSION_MAJOR * 100 + \
+ XCHAL_HW_MIN_VERSION_MINOR)
+#else
+#define XCHAL_HW_MIN_VERSION 0
+#endif
+#endif
+
#endif
diff --git a/arch/xtensa/kernel/perf_event.c b/arch/xtensa/kernel/perf_event.c
index a0d05c8598d0..183618090d05 100644
--- a/arch/xtensa/kernel/perf_event.c
+++ b/arch/xtensa/kernel/perf_event.c
@@ -13,17 +13,26 @@
#include <linux/perf_event.h>
#include <linux/platform_device.h>

+#include <asm/core.h>
#include <asm/processor.h>
#include <asm/stacktrace.h>

+#define XTENSA_HWVERSION_RG_2015_0 260000
+
+#if XCHAL_HW_MIN_VERSION >= XTENSA_HWVERSION_RG_2015_0
+#define XTENSA_PMU_ERI_BASE 0x00101000
+#else
+#define XTENSA_PMU_ERI_BASE 0x00001000
+#endif
+
/* Global control/status for all perf counters */
-#define XTENSA_PMU_PMG 0x1000
+#define XTENSA_PMU_PMG XTENSA_PMU_ERI_BASE
/* Perf counter values */
-#define XTENSA_PMU_PM(i) (0x1080 + (i) * 4)
+#define XTENSA_PMU_PM(i) (XTENSA_PMU_ERI_BASE + 0x80 + (i) * 4)
/* Perf counter control registers */
-#define XTENSA_PMU_PMCTRL(i) (0x1100 + (i) * 4)
+#define XTENSA_PMU_PMCTRL(i) (XTENSA_PMU_ERI_BASE + 0x100 + (i) * 4)
/* Perf counter status registers */
-#define XTENSA_PMU_PMSTAT(i) (0x1180 + (i) * 4)
+#define XTENSA_PMU_PMSTAT(i) (XTENSA_PMU_ERI_BASE + 0x180 + (i) * 4)

#define XTENSA_PMU_PMG_PMEN 0x1

--
2.30.2