2023-07-25 07:52:30

by Guo Samin

[permalink] [raw]
Subject: [-next v1 1/1] riscv: dts: starfive: visionfive 2: Add v1.3B gmac phy configuration

Add visionfive 2 v1.3B gmac phy configuration, including drive strength
and inverting configuration.

Reviewed-by: Hal Feng <[email protected]>
Signed-off-by: Samin Guo <[email protected]>
---
.../dts/starfive/jh7110-starfive-visionfive-2-v1.3b.dts | 9 +++++++++
1 file changed, 9 insertions(+)

diff --git a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2-v1.3b.dts b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2-v1.3b.dts
index 7bca5d9e8f9b..d4ea4a2c0b9b 100644
--- a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2-v1.3b.dts
+++ b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2-v1.3b.dts
@@ -25,11 +25,20 @@
};

&phy0 {
+ motorcomm,tx-clk-adj-enabled;
+ motorcomm,tx-clk-100-inverted;
+ motorcomm,tx-clk-1000-inverted;
+ motorcomm,rx-clk-drv-microamp = <3970>;
+ motorcomm,rx-data-drv-microamp = <2910>;
rx-internal-delay-ps = <1500>;
tx-internal-delay-ps = <1500>;
};

&phy1 {
+ motorcomm,tx-clk-adj-enabled;
+ motorcomm,tx-clk-100-inverted;
+ motorcomm,rx-clk-drv-microamp = <3970>;
+ motorcomm,rx-data-drv-microamp = <2910>;
rx-internal-delay-ps = <300>;
tx-internal-delay-ps = <0>;
};
--
2.17.1



2023-07-25 08:18:06

by Guo Samin

[permalink] [raw]
Subject: Re: [-next v1 1/1] riscv: dts: starfive: visionfive 2: Add v1.3B gmac phy configuration



在 2023/7/25 15:44:06, Conor Dooley wrote:
> On Tue, Jul 25, 2023 at 03:30:39PM +0800, Samin Guo wrote:
>> Add visionfive 2 v1.3B gmac phy configuration, including drive strength
>> and inverting configuration.
>>
>> Reviewed-by: Hal Feng <[email protected]>
>> Signed-off-by: Samin Guo <[email protected]>
>
> I opted to squash this (and my temporary revert that becomes a NOP) into
> the original patch. It should appear in linux-next tomorrow as 0104340a67b1
> ("riscv: dts: starfive: visionfive 2: Add configuration of gmac and phy").
>
> Thanks,
> Conor.

Thank you so much!

Best regards,
Samin

2023-07-25 08:20:23

by Conor Dooley

[permalink] [raw]
Subject: Re: [-next v1 1/1] riscv: dts: starfive: visionfive 2: Add v1.3B gmac phy configuration

On Tue, Jul 25, 2023 at 03:30:39PM +0800, Samin Guo wrote:
> Add visionfive 2 v1.3B gmac phy configuration, including drive strength
> and inverting configuration.
>
> Reviewed-by: Hal Feng <[email protected]>
> Signed-off-by: Samin Guo <[email protected]>

I opted to squash this (and my temporary revert that becomes a NOP) into
the original patch. It should appear in linux-next tomorrow as 0104340a67b1
("riscv: dts: starfive: visionfive 2: Add configuration of gmac and phy").

Thanks,
Conor.

Attachments:
(No filename) (529.00 B)
 signature.asc (235.00 B)
 Download all attachments