The series adds support for the display on the stm32f746-disco board.
Changes in v7:
- Add 'Reviewed-by' tags I forgot in v6.
https://lore.kernel.org/linux-arm-kernel/[email protected]/T/
Changes in v6:
- Remove dma nodes from stm32f746-disco.dts, they are not used by LTDC,
so there is no need to enable them.
Changes in v5:
I am confident that framebuffer sizing is a real requirement for STM32 boards,
but I need some time to understand if and how to introduce this functionality.
Therefore, I drop the following patches to allow the series to be fully merged:
- [4/6] dt-bindings: display: stm32-ltdc: add optional st,fb-bpp property
- [5/6] ARM: dts: stm32: set framebuffer bit depth on stm32f746-disco
- [6/6] drm/stm: set framebuffer bit depth through DTS property
Changes in v4:
- Use DTS property instead of module parameter to set the framebuffer bit depth.
Changes in v3:
- rename ltdc-pins-a-0 to ltdc-0.
- drop [4/6] dt-bindings: display: simple: add Rocktech RK043FN48H
Applied to https://anongit.freedesktop.org/git/drm/drm-misc.git (drm-misc-next):
https://cgit.freedesktop.org/drm/drm-misc/commit/?id=c42a37a27c777d63961dd634a30f7c887949491a
- drop [5/6] drm/panel: simple: add support for Rocktech RK043FN48H panel
Applied to https://anongit.freedesktop.org/git/drm/drm-misc.git (drm-misc-next)
https://cgit.freedesktop.org/drm/drm-misc/commit/?id=13cdd12a9f934158f4ec817cf048fcb4384aa9dc
Dario Binacchi (3):
ARM: dts: stm32: add ltdc support on stm32f746 MCU
ARM: dts: stm32: add pin map for LTDC on stm32f7
ARM: dts: stm32: support display on stm32f746-disco board
arch/arm/boot/dts/st/stm32f7-pinctrl.dtsi | 35 ++++++++++++++++++
arch/arm/boot/dts/st/stm32f746-disco.dts | 43 +++++++++++++++++++++++
arch/arm/boot/dts/st/stm32f746.dtsi | 10 ++++++
3 files changed, 88 insertions(+)
--
2.34.1