Each interrupt should be in its own cell. This is much more readable.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
---
Cc: Stanislav Jakubek <[email protected]>
Cc: Linus Walleij <[email protected]>
---
arch/arm/boot/dts/broadcom/bcm-hr2.dtsi | 4 ++--
arch/arm/boot/dts/broadcom/bcm-nsp.dtsi | 4 ++--
arch/arm/boot/dts/broadcom/bcm11351.dtsi | 13 ++++++-------
arch/arm/boot/dts/broadcom/bcm21664.dtsi | 9 ++++-----
arch/arm/boot/dts/broadcom/bcm23550.dtsi | 9 ++++-----
5 files changed, 18 insertions(+), 21 deletions(-)
diff --git a/arch/arm/boot/dts/broadcom/bcm-hr2.dtsi b/arch/arm/boot/dts/broadcom/bcm-hr2.dtsi
index 33e6ba63a1ee..788a6806191a 100644
--- a/arch/arm/boot/dts/broadcom/bcm-hr2.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm-hr2.dtsi
@@ -54,8 +54,8 @@ cpu0: cpu@0 {
pmu {
compatible = "arm,cortex-a9-pmu";
- interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
interrupt-affinity = <&cpu0>;
};
diff --git a/arch/arm/boot/dts/broadcom/bcm-nsp.dtsi b/arch/arm/boot/dts/broadcom/bcm-nsp.dtsi
index 5b1dc58d40ba..9d20ba3b1ffb 100644
--- a/arch/arm/boot/dts/broadcom/bcm-nsp.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm-nsp.dtsi
@@ -72,8 +72,8 @@ cpu1: cpu@1 {
pmu {
compatible = "arm,cortex-a9-pmu";
- interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
interrupt-affinity = <&cpu0>, <&cpu1>;
};
diff --git a/arch/arm/boot/dts/broadcom/bcm11351.dtsi b/arch/arm/boot/dts/broadcom/bcm11351.dtsi
index b271a9bf06a9..53857e572080 100644
--- a/arch/arm/boot/dts/broadcom/bcm11351.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm11351.dtsi
@@ -111,13 +111,12 @@ timer@35006000 {
gpio: gpio@35003000 {
compatible = "brcm,bcm11351-gpio", "brcm,kona-gpio";
reg = <0x35003000 0x800>;
- interrupts =
- <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
#interrupt-cells = <2>;
gpio-controller;
diff --git a/arch/arm/boot/dts/broadcom/bcm21664.dtsi b/arch/arm/boot/dts/broadcom/bcm21664.dtsi
index 2eb7f5b0c1dc..fa73600e883e 100644
--- a/arch/arm/boot/dts/broadcom/bcm21664.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm21664.dtsi
@@ -101,11 +101,10 @@ timer@35006000 {
gpio: gpio@35003000 {
compatible = "brcm,bcm21664-gpio", "brcm,kona-gpio";
reg = <0x35003000 0x524>;
- interrupts =
- <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
#interrupt-cells = <2>;
gpio-controller;
diff --git a/arch/arm/boot/dts/broadcom/bcm23550.dtsi b/arch/arm/boot/dts/broadcom/bcm23550.dtsi
index 445eadb8d871..50ebe93d6bd0 100644
--- a/arch/arm/boot/dts/broadcom/bcm23550.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm23550.dtsi
@@ -101,11 +101,10 @@ resetmgr: reset-controller@1001f00 {
gpio: gpio@1003000 {
compatible = "brcm,bcm23550-gpio", "brcm,kona-gpio";
reg = <0x01003000 0x524>;
- interrupts =
- <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
#interrupt-cells = <2>;
gpio-controller;
--
2.34.1