For TJA1120, the enable bit for cable test is not writable if the PHY is
not in test mode.
Signed-off-by: Radu Pirea (NXP OSS) <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
---
drivers/net/phy/nxp-c45-tja11xx.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/net/phy/nxp-c45-tja11xx.c b/drivers/net/phy/nxp-c45-tja11xx.c
index a52067da9dbf..92a2eca2a02c 100644
--- a/drivers/net/phy/nxp-c45-tja11xx.c
+++ b/drivers/net/phy/nxp-c45-tja11xx.c
@@ -145,6 +145,7 @@
#define VEND1_PORT_FUNC_ENABLES 0x8048
#define PTP_ENABLE BIT(3)
+#define PHY_TEST_ENABLE BIT(0)
#define VEND1_PORT_PTP_CONTROL 0x9000
#define PORT_PTP_CONTROL_BYPASS BIT(11)
@@ -1258,6 +1259,8 @@ static int nxp_c45_cable_test_start(struct phy_device *phydev)
{
const struct nxp_c45_regmap *regmap = nxp_c45_get_regmap(phydev);
+ phy_set_bits_mmd(phydev, MDIO_MMD_VEND1,
+ VEND1_PORT_FUNC_ENABLES, PHY_TEST_ENABLE);
return phy_set_bits_mmd(phydev, MDIO_MMD_VEND1, regmap->cable_test,
CABLE_TEST_ENABLE | CABLE_TEST_START);
}
@@ -1299,6 +1302,8 @@ static int nxp_c45_cable_test_get_status(struct phy_device *phydev,
phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, regmap->cable_test,
CABLE_TEST_ENABLE);
+ phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1,
+ VEND1_PORT_FUNC_ENABLES, PHY_TEST_ENABLE);
return nxp_c45_start_op(phydev);
}
--
2.34.1