From: WANG Xuerui <[email protected]>
The algorithms work on 64 bytes at a time, which is the L1 cache line
size of all current and future LoongArch cores (that we care about), as
confirmed by Huacai. The code is based on the generic int.uc algorithm,
unrolled 4 times for LSX and 2 times for LASX. Further unrolling does
not meaningfully improve the performance according to experiments.
Performance numbers measured during system boot on a 3A5000 @ 2.5GHz:
> raid6: lasx gen() 12726 MB/s
> raid6: lsx gen() 10001 MB/s
> raid6: int64x8 gen() 2876 MB/s
> raid6: int64x4 gen() 3867 MB/s
> raid6: int64x2 gen() 2531 MB/s
> raid6: int64x1 gen() 1945 MB/s
Comparison of xor() speeds (from different boots but meaningful anyway):
> lasx: 11226 MB/s
> lsx: 6395 MB/s
> int64x4: 2147 MB/s
Performance as measured by raid6test:
> raid6: lasx gen() 25109 MB/s
> raid6: lsx gen() 13233 MB/s
> raid6: int64x8 gen() 4164 MB/s
> raid6: int64x4 gen() 6005 MB/s
> raid6: int64x2 gen() 5781 MB/s
> raid6: int64x1 gen() 4119 MB/s
> raid6: using algorithm lasx gen() 25109 MB/s
> raid6: .... xor() 14439 MB/s, rmw enabled
Signed-off-by: WANG Xuerui <[email protected]>
---
include/linux/raid/pq.h | 2 +
lib/raid6/Makefile | 1 +
lib/raid6/algos.c | 8 +
lib/raid6/loongarch.h | 38 ++++
lib/raid6/loongarch_simd.c | 422 +++++++++++++++++++++++++++++++++++++
lib/raid6/test/Makefile | 12 ++
6 files changed, 483 insertions(+)
create mode 100644 lib/raid6/loongarch.h
create mode 100644 lib/raid6/loongarch_simd.c
diff --git a/include/linux/raid/pq.h b/include/linux/raid/pq.h
index f29aaaf2eb21e..8744474858487 100644
--- a/include/linux/raid/pq.h
+++ b/include/linux/raid/pq.h
@@ -108,6 +108,8 @@ extern const struct raid6_calls raid6_vpermxor1;
extern const struct raid6_calls raid6_vpermxor2;
extern const struct raid6_calls raid6_vpermxor4;
extern const struct raid6_calls raid6_vpermxor8;
+extern const struct raid6_calls raid6_lsx;
+extern const struct raid6_calls raid6_lasx;
struct raid6_recov_calls {
void (*data2)(int, size_t, int, int, void **);
diff --git a/lib/raid6/Makefile b/lib/raid6/Makefile
index 45e17619422b4..2b9ebe1054806 100644
--- a/lib/raid6/Makefile
+++ b/lib/raid6/Makefile
@@ -9,6 +9,7 @@ raid6_pq-$(CONFIG_ALTIVEC) += altivec1.o altivec2.o altivec4.o altivec8.o \
vpermxor1.o vpermxor2.o vpermxor4.o vpermxor8.o
raid6_pq-$(CONFIG_KERNEL_MODE_NEON) += neon.o neon1.o neon2.o neon4.o neon8.o recov_neon.o recov_neon_inner.o
raid6_pq-$(CONFIG_S390) += s390vx8.o recov_s390xc.o
+raid6_pq-$(CONFIG_LOONGARCH) += loongarch_simd.o
hostprogs += mktables
diff --git a/lib/raid6/algos.c b/lib/raid6/algos.c
index a22a05c9af8a3..739c7ebcae1a2 100644
--- a/lib/raid6/algos.c
+++ b/lib/raid6/algos.c
@@ -73,6 +73,14 @@ const struct raid6_calls * const raid6_algos[] = {
&raid6_neonx2,
&raid6_neonx1,
#endif
+#ifdef CONFIG_LOONGARCH
+#ifdef CONFIG_CPU_HAS_LASX
+ &raid6_lasx,
+#endif
+#ifdef CONFIG_CPU_HAS_LSX
+ &raid6_lsx,
+#endif
+#endif
#if defined(__ia64__)
&raid6_intx32,
&raid6_intx16,
diff --git a/lib/raid6/loongarch.h b/lib/raid6/loongarch.h
new file mode 100644
index 0000000000000..acfc33ce70562
--- /dev/null
+++ b/lib/raid6/loongarch.h
@@ -0,0 +1,38 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Copyright (C) 2023 WANG Xuerui <[email protected]>
+ *
+ * raid6/loongarch.h
+ *
+ * Definitions common to LoongArch RAID-6 code only
+ */
+
+#ifndef _LIB_RAID6_LOONGARCH_H
+#define _LIB_RAID6_LOONGARCH_H
+
+#ifdef __KERNEL__
+
+#include <asm/cpu-features.h>
+#include <asm/fpu.h>
+
+#else /* for user-space testing */
+
+#include <sys/auxv.h>
+
+/* have to supply these defines for glibc 2.37- and musl */
+#ifndef HWCAP_LOONGARCH_LSX
+#define HWCAP_LOONGARCH_LSX (1 << 4)
+#endif
+#ifndef HWCAP_LOONGARCH_LASX
+#define HWCAP_LOONGARCH_LASX (1 << 5)
+#endif
+
+#define kernel_fpu_begin()
+#define kernel_fpu_end()
+
+#define cpu_has_lsx (getauxval(AT_HWCAP) & HWCAP_LOONGARCH_LSX)
+#define cpu_has_lasx (getauxval(AT_HWCAP) & HWCAP_LOONGARCH_LASX)
+
+#endif /* __KERNEL__ */
+
+#endif /* _LIB_RAID6_LOONGARCH_H */
diff --git a/lib/raid6/loongarch_simd.c b/lib/raid6/loongarch_simd.c
new file mode 100644
index 0000000000000..ebb33e5c8f060
--- /dev/null
+++ b/lib/raid6/loongarch_simd.c
@@ -0,0 +1,422 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * RAID6 syndrome calculations in LoongArch SIMD (LSX & LASX)
+ *
+ * Copyright 2023 WANG Xuerui <[email protected]>
+ *
+ * Based on the generic RAID-6 code (int.uc):
+ *
+ * Copyright 2002-2004 H. Peter Anvin
+ */
+
+#include <linux/raid/pq.h>
+#include "loongarch.h"
+
+/*
+ * The vector algorithms are currently priority 0, which means the generic
+ * scalar algorithms are not being disabled if vector support is present.
+ * This is like the similar LoongArch RAID5 XOR code, with the main reason
+ * repeated here: it cannot be ruled out at this point of time, that some
+ * future (maybe reduced) models could run the vector algorithms slower than
+ * the scalar ones, maybe for errata or micro-op reasons. It may be
+ * appropriate to revisit this after one or two more uarch generations.
+ */
+
+#ifdef CONFIG_CPU_HAS_LSX
+#define NSIZE 16
+
+static int raid6_has_lsx(void)
+{
+ return cpu_has_lsx;
+}
+
+static void raid6_lsx_gen_syndrome(int disks, size_t bytes, void **ptrs)
+{
+ u8 **dptr = (u8 **)ptrs;
+ u8 *p, *q;
+ int d, z, z0;
+
+ z0 = disks - 3; /* Highest data disk */
+ p = dptr[z0+1]; /* XOR parity */
+ q = dptr[z0+2]; /* RS syndrome */
+
+ kernel_fpu_begin();
+
+ /*
+ * $vr0, $vr1, $vr2, $vr3: wp
+ * $vr4, $vr5, $vr6, $vr7: wq
+ * $vr8, $vr9, $vr10, $vr11: wd
+ * $vr12, $vr13, $vr14, $vr15: w2
+ * $vr16, $vr17, $vr18, $vr19: w1
+ */
+ for ( d = 0 ; d < bytes ; d += NSIZE*4 ) {
+ /* wq$$ = wp$$ = *(unative_t *)&dptr[z0][d+$$*NSIZE]; */
+ asm volatile("vld $vr0, %0" : : "m"(dptr[z0][d+0*NSIZE]));
+ asm volatile("vld $vr1, %0" : : "m"(dptr[z0][d+1*NSIZE]));
+ asm volatile("vld $vr2, %0" : : "m"(dptr[z0][d+2*NSIZE]));
+ asm volatile("vld $vr3, %0" : : "m"(dptr[z0][d+3*NSIZE]));
+ asm volatile("vori.b $vr4, $vr0, 0");
+ asm volatile("vori.b $vr5, $vr1, 0");
+ asm volatile("vori.b $vr6, $vr2, 0");
+ asm volatile("vori.b $vr7, $vr3, 0");
+ for ( z = z0-1 ; z >= 0 ; z-- ) {
+ /* wd$$ = *(unative_t *)&dptr[z][d+$$*NSIZE]; */
+ asm volatile("vld $vr8, %0" : : "m"(dptr[z][d+0*NSIZE]));
+ asm volatile("vld $vr9, %0" : : "m"(dptr[z][d+1*NSIZE]));
+ asm volatile("vld $vr10, %0" : : "m"(dptr[z][d+2*NSIZE]));
+ asm volatile("vld $vr11, %0" : : "m"(dptr[z][d+3*NSIZE]));
+ /* wp$$ ^= wd$$; */
+ asm volatile("vxor.v $vr0, $vr0, $vr8");
+ asm volatile("vxor.v $vr1, $vr1, $vr9");
+ asm volatile("vxor.v $vr2, $vr2, $vr10");
+ asm volatile("vxor.v $vr3, $vr3, $vr11");
+ /* w2$$ = MASK(wq$$); */
+ asm volatile("vslti.b $vr12, $vr4, 0");
+ asm volatile("vslti.b $vr13, $vr5, 0");
+ asm volatile("vslti.b $vr14, $vr6, 0");
+ asm volatile("vslti.b $vr15, $vr7, 0");
+ /* w1$$ = SHLBYTE(wq$$); */
+ asm volatile("vslli.b $vr16, $vr4, 1");
+ asm volatile("vslli.b $vr17, $vr5, 1");
+ asm volatile("vslli.b $vr18, $vr6, 1");
+ asm volatile("vslli.b $vr19, $vr7, 1");
+ /* w2$$ &= NBYTES(0x1d); */
+ asm volatile("vandi.b $vr12, $vr12, 0x1d");
+ asm volatile("vandi.b $vr13, $vr13, 0x1d");
+ asm volatile("vandi.b $vr14, $vr14, 0x1d");
+ asm volatile("vandi.b $vr15, $vr15, 0x1d");
+ /* w1$$ ^= w2$$; */
+ asm volatile("vxor.v $vr16, $vr16, $vr12");
+ asm volatile("vxor.v $vr17, $vr17, $vr13");
+ asm volatile("vxor.v $vr18, $vr18, $vr14");
+ asm volatile("vxor.v $vr19, $vr19, $vr15");
+ /* wq$$ = w1$$ ^ wd$$; */
+ asm volatile("vxor.v $vr4, $vr16, $vr8");
+ asm volatile("vxor.v $vr5, $vr17, $vr9");
+ asm volatile("vxor.v $vr6, $vr18, $vr10");
+ asm volatile("vxor.v $vr7, $vr19, $vr11");
+ }
+ /* *(unative_t *)&p[d+NSIZE*$$] = wp$$; */
+ asm volatile("vst $vr0, %0" : "=m"(p[d+NSIZE*0]));
+ asm volatile("vst $vr1, %0" : "=m"(p[d+NSIZE*1]));
+ asm volatile("vst $vr2, %0" : "=m"(p[d+NSIZE*2]));
+ asm volatile("vst $vr3, %0" : "=m"(p[d+NSIZE*3]));
+ /* *(unative_t *)&q[d+NSIZE*$$] = wq$$; */
+ asm volatile("vst $vr4, %0" : "=m"(q[d+NSIZE*0]));
+ asm volatile("vst $vr5, %0" : "=m"(q[d+NSIZE*1]));
+ asm volatile("vst $vr6, %0" : "=m"(q[d+NSIZE*2]));
+ asm volatile("vst $vr7, %0" : "=m"(q[d+NSIZE*3]));
+ }
+
+ kernel_fpu_end();
+}
+
+static void raid6_lsx_xor_syndrome(int disks, int start, int stop,
+ size_t bytes, void **ptrs)
+{
+ u8 **dptr = (u8 **)ptrs;
+ u8 *p, *q;
+ int d, z, z0;
+
+ z0 = stop; /* P/Q right side optimization */
+ p = dptr[disks-2]; /* XOR parity */
+ q = dptr[disks-1]; /* RS syndrome */
+
+ kernel_fpu_begin();
+
+ /*
+ * $vr0, $vr1, $vr2, $vr3: wp
+ * $vr4, $vr5, $vr6, $vr7: wq
+ * $vr8, $vr9, $vr10, $vr11: wd
+ * $vr12, $vr13, $vr14, $vr15: w2
+ * $vr16, $vr17, $vr18, $vr19: w1
+ */
+ for ( d = 0 ; d < bytes ; d += NSIZE*4 ) {
+ /* P/Q data pages */
+ /* wq$$ = wp$$ = *(unative_t *)&dptr[z0][d+$$*NSIZE]; */
+ asm volatile("vld $vr0, %0" : : "m"(dptr[z0][d+0*NSIZE]));
+ asm volatile("vld $vr1, %0" : : "m"(dptr[z0][d+1*NSIZE]));
+ asm volatile("vld $vr2, %0" : : "m"(dptr[z0][d+2*NSIZE]));
+ asm volatile("vld $vr3, %0" : : "m"(dptr[z0][d+3*NSIZE]));
+ asm volatile("vori.b $vr4, $vr0, 0");
+ asm volatile("vori.b $vr5, $vr1, 0");
+ asm volatile("vori.b $vr6, $vr2, 0");
+ asm volatile("vori.b $vr7, $vr3, 0");
+ for ( z = z0-1 ; z >= start ; z-- ) {
+ /* wd$$ = *(unative_t *)&dptr[z][d+$$*NSIZE]; */
+ asm volatile("vld $vr8, %0" : : "m"(dptr[z][d+0*NSIZE]));
+ asm volatile("vld $vr9, %0" : : "m"(dptr[z][d+1*NSIZE]));
+ asm volatile("vld $vr10, %0" : : "m"(dptr[z][d+2*NSIZE]));
+ asm volatile("vld $vr11, %0" : : "m"(dptr[z][d+3*NSIZE]));
+ /* wp$$ ^= wd$$; */
+ asm volatile("vxor.v $vr0, $vr0, $vr8");
+ asm volatile("vxor.v $vr1, $vr1, $vr9");
+ asm volatile("vxor.v $vr2, $vr2, $vr10");
+ asm volatile("vxor.v $vr3, $vr3, $vr11");
+ /* w2$$ = MASK(wq$$); */
+ asm volatile("vslti.b $vr12, $vr4, 0");
+ asm volatile("vslti.b $vr13, $vr5, 0");
+ asm volatile("vslti.b $vr14, $vr6, 0");
+ asm volatile("vslti.b $vr15, $vr7, 0");
+ /* w1$$ = SHLBYTE(wq$$); */
+ asm volatile("vslli.b $vr16, $vr4, 1");
+ asm volatile("vslli.b $vr17, $vr5, 1");
+ asm volatile("vslli.b $vr18, $vr6, 1");
+ asm volatile("vslli.b $vr19, $vr7, 1");
+ /* w2$$ &= NBYTES(0x1d); */
+ asm volatile("vandi.b $vr12, $vr12, 0x1d");
+ asm volatile("vandi.b $vr13, $vr13, 0x1d");
+ asm volatile("vandi.b $vr14, $vr14, 0x1d");
+ asm volatile("vandi.b $vr15, $vr15, 0x1d");
+ /* w1$$ ^= w2$$; */
+ asm volatile("vxor.v $vr16, $vr16, $vr12");
+ asm volatile("vxor.v $vr17, $vr17, $vr13");
+ asm volatile("vxor.v $vr18, $vr18, $vr14");
+ asm volatile("vxor.v $vr19, $vr19, $vr15");
+ /* wq$$ = w1$$ ^ wd$$; */
+ asm volatile("vxor.v $vr4, $vr16, $vr8");
+ asm volatile("vxor.v $vr5, $vr17, $vr9");
+ asm volatile("vxor.v $vr6, $vr18, $vr10");
+ asm volatile("vxor.v $vr7, $vr19, $vr11");
+ }
+
+ /* P/Q left side optimization */
+ for ( z = start-1 ; z >= 0 ; z-- ) {
+ /* w2$$ = MASK(wq$$); */
+ asm volatile("vslti.b $vr12, $vr4, 0");
+ asm volatile("vslti.b $vr13, $vr5, 0");
+ asm volatile("vslti.b $vr14, $vr6, 0");
+ asm volatile("vslti.b $vr15, $vr7, 0");
+ /* w1$$ = SHLBYTE(wq$$); */
+ asm volatile("vslli.b $vr16, $vr4, 1");
+ asm volatile("vslli.b $vr17, $vr5, 1");
+ asm volatile("vslli.b $vr18, $vr6, 1");
+ asm volatile("vslli.b $vr19, $vr7, 1");
+ /* w2$$ &= NBYTES(0x1d); */
+ asm volatile("vandi.b $vr12, $vr12, 0x1d");
+ asm volatile("vandi.b $vr13, $vr13, 0x1d");
+ asm volatile("vandi.b $vr14, $vr14, 0x1d");
+ asm volatile("vandi.b $vr15, $vr15, 0x1d");
+ /* wq$$ = w1$$ ^ w2$$; */
+ asm volatile("vxor.v $vr4, $vr16, $vr12");
+ asm volatile("vxor.v $vr5, $vr17, $vr13");
+ asm volatile("vxor.v $vr6, $vr18, $vr14");
+ asm volatile("vxor.v $vr7, $vr19, $vr15");
+ }
+ /*
+ * *(unative_t *)&p[d+NSIZE*$$] ^= wp$$;
+ * *(unative_t *)&q[d+NSIZE*$$] ^= wq$$;
+ */
+ asm volatile(
+ "vld $vr20, %0\n\t"
+ "vld $vr21, %1\n\t"
+ "vld $vr22, %2\n\t"
+ "vld $vr23, %3\n\t"
+ "vld $vr24, %4\n\t"
+ "vld $vr25, %5\n\t"
+ "vld $vr26, %6\n\t"
+ "vld $vr27, %7\n\t"
+ "vxor.v $vr20, $vr20, $vr0\n\t"
+ "vxor.v $vr21, $vr21, $vr1\n\t"
+ "vxor.v $vr22, $vr22, $vr2\n\t"
+ "vxor.v $vr23, $vr23, $vr3\n\t"
+ "vxor.v $vr24, $vr24, $vr4\n\t"
+ "vxor.v $vr25, $vr25, $vr5\n\t"
+ "vxor.v $vr26, $vr26, $vr6\n\t"
+ "vxor.v $vr27, $vr27, $vr7\n\t"
+ "vst $vr20, %0\n\t"
+ "vst $vr21, %1\n\t"
+ "vst $vr22, %2\n\t"
+ "vst $vr23, %3\n\t"
+ "vst $vr24, %4\n\t"
+ "vst $vr25, %5\n\t"
+ "vst $vr26, %6\n\t"
+ "vst $vr27, %7\n\t"
+ : "+m"(p[d+NSIZE*0]), "+m"(p[d+NSIZE*1]),
+ "+m"(p[d+NSIZE*2]), "+m"(p[d+NSIZE*3]),
+ "+m"(q[d+NSIZE*0]), "+m"(q[d+NSIZE*1]),
+ "+m"(q[d+NSIZE*2]), "+m"(q[d+NSIZE*3])
+ );
+ }
+
+ kernel_fpu_end();
+}
+
+const struct raid6_calls raid6_lsx = {
+ raid6_lsx_gen_syndrome,
+ raid6_lsx_xor_syndrome,
+ raid6_has_lsx,
+ "lsx",
+ .priority = 0 /* see the comment near the top of the file for reason */
+};
+
+#undef NSIZE
+#endif /* CONFIG_CPU_HAS_LSX */
+
+#ifdef CONFIG_CPU_HAS_LASX
+#define NSIZE 32
+
+static int raid6_has_lasx(void)
+{
+ return cpu_has_lasx;
+}
+
+static void raid6_lasx_gen_syndrome(int disks, size_t bytes, void **ptrs)
+{
+ u8 **dptr = (u8 **)ptrs;
+ u8 *p, *q;
+ int d, z, z0;
+
+ z0 = disks - 3; /* Highest data disk */
+ p = dptr[z0+1]; /* XOR parity */
+ q = dptr[z0+2]; /* RS syndrome */
+
+ kernel_fpu_begin();
+
+ /*
+ * $xr0, $xr1: wp
+ * $xr2, $xr3: wq
+ * $xr4, $xr5: wd
+ * $xr6, $xr7: w2
+ * $xr8, $xr9: w1
+ */
+ for ( d = 0 ; d < bytes ; d += NSIZE*2 ) {
+ /* wq$$ = wp$$ = *(unative_t *)&dptr[z0][d+$$*NSIZE]; */
+ asm volatile("xvld $xr0, %0" : : "m"(dptr[z0][d+0*NSIZE]));
+ asm volatile("xvld $xr1, %0" : : "m"(dptr[z0][d+1*NSIZE]));
+ asm volatile("xvori.b $xr2, $xr0, 0");
+ asm volatile("xvori.b $xr3, $xr1, 0");
+ for ( z = z0-1 ; z >= 0 ; z-- ) {
+ /* wd$$ = *(unative_t *)&dptr[z][d+$$*NSIZE]; */
+ asm volatile("xvld $xr4, %0" : : "m"(dptr[z][d+0*NSIZE]));
+ asm volatile("xvld $xr5, %0" : : "m"(dptr[z][d+1*NSIZE]));
+ /* wp$$ ^= wd$$; */
+ asm volatile("xvxor.v $xr0, $xr0, $xr4");
+ asm volatile("xvxor.v $xr1, $xr1, $xr5");
+ /* w2$$ = MASK(wq$$); */
+ asm volatile("xvslti.b $xr6, $xr2, 0");
+ asm volatile("xvslti.b $xr7, $xr3, 0");
+ /* w1$$ = SHLBYTE(wq$$); */
+ asm volatile("xvslli.b $xr8, $xr2, 1");
+ asm volatile("xvslli.b $xr9, $xr3, 1");
+ /* w2$$ &= NBYTES(0x1d); */
+ asm volatile("xvandi.b $xr6, $xr6, 0x1d");
+ asm volatile("xvandi.b $xr7, $xr7, 0x1d");
+ /* w1$$ ^= w2$$; */
+ asm volatile("xvxor.v $xr8, $xr8, $xr6");
+ asm volatile("xvxor.v $xr9, $xr9, $xr7");
+ /* wq$$ = w1$$ ^ wd$$; */
+ asm volatile("xvxor.v $xr2, $xr8, $xr4");
+ asm volatile("xvxor.v $xr3, $xr9, $xr5");
+ }
+ /* *(unative_t *)&p[d+NSIZE*$$] = wp$$; */
+ asm volatile("xvst $xr0, %0" : "=m"(p[d+NSIZE*0]));
+ asm volatile("xvst $xr1, %0" : "=m"(p[d+NSIZE*1]));
+ /* *(unative_t *)&q[d+NSIZE*$$] = wq$$; */
+ asm volatile("xvst $xr2, %0" : "=m"(q[d+NSIZE*0]));
+ asm volatile("xvst $xr3, %0" : "=m"(q[d+NSIZE*1]));
+ }
+
+ kernel_fpu_end();
+}
+
+static void raid6_lasx_xor_syndrome(int disks, int start, int stop,
+ size_t bytes, void **ptrs)
+{
+ u8 **dptr = (u8 **)ptrs;
+ u8 *p, *q;
+ int d, z, z0;
+
+ z0 = stop; /* P/Q right side optimization */
+ p = dptr[disks-2]; /* XOR parity */
+ q = dptr[disks-1]; /* RS syndrome */
+
+ kernel_fpu_begin();
+
+ /*
+ * $xr0, $xr1: wp
+ * $xr2, $xr3: wq
+ * $xr4, $xr5: wd
+ * $xr6, $xr7: w2
+ * $xr8, $xr9: w1
+ */
+ for ( d = 0 ; d < bytes ; d += NSIZE*2 ) {
+ /* P/Q data pages */
+ /* wq$$ = wp$$ = *(unative_t *)&dptr[z0][d+$$*NSIZE]; */
+ asm volatile("xvld $xr0, %0" : : "m"(dptr[z0][d+0*NSIZE]));
+ asm volatile("xvld $xr1, %0" : : "m"(dptr[z0][d+1*NSIZE]));
+ asm volatile("xvori.b $xr2, $xr0, 0");
+ asm volatile("xvori.b $xr3, $xr1, 0");
+ for ( z = z0-1 ; z >= start ; z-- ) {
+ /* wd$$ = *(unative_t *)&dptr[z][d+$$*NSIZE]; */
+ asm volatile("xvld $xr4, %0" : : "m"(dptr[z][d+0*NSIZE]));
+ asm volatile("xvld $xr5, %0" : : "m"(dptr[z][d+1*NSIZE]));
+ /* wp$$ ^= wd$$; */
+ asm volatile("xvxor.v $xr0, $xr0, $xr4");
+ asm volatile("xvxor.v $xr1, $xr1, $xr5");
+ /* w2$$ = MASK(wq$$); */
+ asm volatile("xvslti.b $xr6, $xr2, 0");
+ asm volatile("xvslti.b $xr7, $xr3, 0");
+ /* w1$$ = SHLBYTE(wq$$); */
+ asm volatile("xvslli.b $xr8, $xr2, 1");
+ asm volatile("xvslli.b $xr9, $xr3, 1");
+ /* w2$$ &= NBYTES(0x1d); */
+ asm volatile("xvandi.b $xr6, $xr6, 0x1d");
+ asm volatile("xvandi.b $xr7, $xr7, 0x1d");
+ /* w1$$ ^= w2$$; */
+ asm volatile("xvxor.v $xr8, $xr8, $xr6");
+ asm volatile("xvxor.v $xr9, $xr9, $xr7");
+ /* wq$$ = w1$$ ^ wd$$; */
+ asm volatile("xvxor.v $xr2, $xr8, $xr4");
+ asm volatile("xvxor.v $xr3, $xr9, $xr5");
+ }
+
+ /* P/Q left side optimization */
+ for ( z = start-1 ; z >= 0 ; z-- ) {
+ /* w2$$ = MASK(wq$$); */
+ asm volatile("xvslti.b $xr6, $xr2, 0");
+ asm volatile("xvslti.b $xr7, $xr3, 0");
+ /* w1$$ = SHLBYTE(wq$$); */
+ asm volatile("xvslli.b $xr8, $xr2, 1");
+ asm volatile("xvslli.b $xr9, $xr3, 1");
+ /* w2$$ &= NBYTES(0x1d); */
+ asm volatile("xvandi.b $xr6, $xr6, 0x1d");
+ asm volatile("xvandi.b $xr7, $xr7, 0x1d");
+ /* wq$$ = w1$$ ^ w2$$; */
+ asm volatile("xvxor.v $xr2, $xr8, $xr6");
+ asm volatile("xvxor.v $xr3, $xr9, $xr7");
+ }
+ /*
+ * *(unative_t *)&p[d+NSIZE*$$] ^= wp$$;
+ * *(unative_t *)&q[d+NSIZE*$$] ^= wq$$;
+ */
+ asm volatile(
+ "xvld $xr10, %0\n\t"
+ "xvld $xr11, %1\n\t"
+ "xvld $xr12, %2\n\t"
+ "xvld $xr13, %3\n\t"
+ "xvxor.v $xr10, $xr10, $xr0\n\t"
+ "xvxor.v $xr11, $xr11, $xr1\n\t"
+ "xvxor.v $xr12, $xr12, $xr2\n\t"
+ "xvxor.v $xr13, $xr13, $xr3\n\t"
+ "xvst $xr10, %0\n\t"
+ "xvst $xr11, %1\n\t"
+ "xvst $xr12, %2\n\t"
+ "xvst $xr13, %3\n\t"
+ : "+m"(p[d+NSIZE*0]), "+m"(p[d+NSIZE*1]),
+ "+m"(q[d+NSIZE*0]), "+m"(q[d+NSIZE*1])
+ );
+ }
+
+ kernel_fpu_end();
+}
+
+const struct raid6_calls raid6_lasx = {
+ raid6_lasx_gen_syndrome,
+ raid6_lasx_xor_syndrome,
+ raid6_has_lasx,
+ "lasx",
+ .priority = 0 /* see the comment near the top of the file for reason */
+};
+#undef NSIZE
+#endif /* CONFIG_CPU_HAS_LASX */
diff --git a/lib/raid6/test/Makefile b/lib/raid6/test/Makefile
index 1f693ea3b980c..7b244bce32b3d 100644
--- a/lib/raid6/test/Makefile
+++ b/lib/raid6/test/Makefile
@@ -41,6 +41,16 @@ ifeq ($(findstring ppc,$(ARCH)),ppc)
gcc -c -x c - >/dev/null && rm ./-.o && echo yes)
endif
+ifeq ($(ARCH),loongarch64)
+ CFLAGS += -I../../../arch/loongarch/include -DCONFIG_LOONGARCH=1
+ CFLAGS += $(shell echo 'vld $$vr0, $$zero, 0' | \
+ gcc -c -x assembler - >/dev/null 2>&1 && \
+ rm ./-.o && echo -DCONFIG_CPU_HAS_LSX=1)
+ CFLAGS += $(shell echo 'xvld $$xr0, $$zero, 0' | \
+ gcc -c -x assembler - >/dev/null 2>&1 && \
+ rm ./-.o && echo -DCONFIG_CPU_HAS_LASX=1)
+endif
+
ifeq ($(IS_X86),yes)
OBJS += mmx.o sse1.o sse2.o avx2.o recov_ssse3.o recov_avx2.o avx512.o recov_avx512.o
CFLAGS += -DCONFIG_X86
@@ -54,6 +64,8 @@ else ifeq ($(HAS_ALTIVEC),yes)
CFLAGS += -DCONFIG_ALTIVEC
OBJS += altivec1.o altivec2.o altivec4.o altivec8.o \
vpermxor1.o vpermxor2.o vpermxor4.o vpermxor8.o
+else ifeq ($(ARCH),loongarch64)
+ OBJS += loongarch_simd.o
endif
.c.o:
--
2.40.0