Currently, direct wqe is not supported for wr-list. RoCE driver excludes
direct wqe for wr-list by judging whether the number of wr is 1.
For a wr-list where the second wr is a length-error atomic wr, the
post-send driver handles the first wr and adds 1 to the wr number counter
firstly. While handling the second wr, the driver finds out a length error
and terminates the wr handle process, remaining the counter at 1. This
causes the driver mistakenly judges there is only 1 wr and thus enters
the direct wqe process, carrying the current length-error atomic wqe.
This patch fixes the error by adding a judgement whether the current wr
is a bad wr. If so, use the normal doorbell process but not direct wqe
despite the wr number is 1.
Fixes: 01584a5edcc4 ("RDMA/hns: Add support of direct wqe")
Signed-off-by: Junxian Huang <[email protected]>
---
drivers/infiniband/hw/hns/hns_roce_hw_v2.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/infiniband/hw/hns/hns_roce_hw_v2.c b/drivers/infiniband/hw/hns/hns_roce_hw_v2.c
index 8f7eb11066b4..f95551b6d407 100644
--- a/drivers/infiniband/hw/hns/hns_roce_hw_v2.c
+++ b/drivers/infiniband/hw/hns/hns_roce_hw_v2.c
@@ -750,7 +750,8 @@ static int hns_roce_v2_post_send(struct ib_qp *ibqp,
qp->sq.head += nreq;
qp->next_sge = sge_idx;
- if (nreq == 1 && (qp->en_flags & HNS_ROCE_QP_CAP_DIRECT_WQE))
+ if (nreq == 1 && !ret &&
+ (qp->en_flags & HNS_ROCE_QP_CAP_DIRECT_WQE))
write_dwqe(hr_dev, qp, wqe);
else
update_sq_db(hr_dev, qp);
--
2.30.0