xchg for variables of size 1-byte and 2-bytes is not yet available for
riscv, even though its present in other architectures such as arm64 and
x86. This could lead to not being able to implement some locking mechanisms
or requiring some rework to make it work properly.
Implement 1-byte and 2-bytes xchg in order to achieve parity with other
architectures.
Signed-off-by: Leonardo Bras <[email protected]>
---
arch/riscv/include/asm/cmpxchg.h | 31 +++++++++++++++++++++++++++++++
1 file changed, 31 insertions(+)
diff --git a/arch/riscv/include/asm/cmpxchg.h b/arch/riscv/include/asm/cmpxchg.h
index dfb433ac544f..943f094375c7 100644
--- a/arch/riscv/include/asm/cmpxchg.h
+++ b/arch/riscv/include/asm/cmpxchg.h
@@ -11,6 +11,31 @@
#include <asm/barrier.h>
#include <asm/fence.h>
+#define __arch_xchg_mask(prepend, append, r, p, n) \
+({ \
+ /* Depends on 2-byte variables being 2-byte aligned */ \
+ ulong __s = ((ulong)(p) & 0x3) * BITS_PER_BYTE; \
+ ulong __mask = GENMASK(((sizeof(*p)) * BITS_PER_BYTE) - 1, 0) \
+ << __s; \
+ ulong __newx = (ulong)(n) << __s; \
+ ulong __retx; \
+ register unsigned int __rc; \
+ \
+ __asm__ __volatile__ ( \
+ prepend \
+ "0: lr.w %0, %2\n" \
+ " and %1, %0, %z4\n" \
+ " or %1, %1, %z3\n" \
+ " sc.w %1, %1, %2\n" \
+ " bnez %1, 0b\n" \
+ append \
+ : "=&r" (__retx), "=&r" (__rc), "+A" (*(p)) \
+ : "rJ" (__newx), "rJ" (~__mask) \
+ : "memory"); \
+ \
+ r = (__typeof__(*(p)))((__retx & __mask) >> __s); \
+})
+
#define __arch_xchg(sfx, prepend, append, r, p, n) \
({ \
__asm__ __volatile__ ( \
@@ -27,7 +52,13 @@
__typeof__(*(ptr)) __new = (new); \
__typeof__(*(ptr)) __ret; \
__typeof__(ptr) __ptr = (ptr); \
+ \
switch (sizeof(*__ptr)) { \
+ case 1: \
+ case 2: \
+ __arch_xchg_mask(prepend, append, \
+ __ret, __ptr, __new); \
+ break; \
case 4: \
__arch_xchg(".w" sfx, prepend, append, \
__ret, __ptr, __new); \
--
2.41.0