The BigTreeTech Pi is an H616 based board based on CB1.
Just in Rpi format board.
It features the same internals as BTT CB1 but adds:
- Fan port
- IR receiver
- ADXL345 Accelerometer connector via SPI
- 24V DC power supply via terminal plugs
- USB to CAN module connector (The actual USB to CAN happens on the external module)
List of currently working things is same as BTT CB1 but also:
- IR receiver
- ADXL345 connector
Signed-off-by: Martin Botka <[email protected]>
---
Changes in V2:
- Add UART alongside aliases and chosen for it
- Add model string
- Enable IR receiver
- Enable SPI0 for ADXL345 connector
arch/arm64/boot/dts/allwinner/Makefile | 1 +
.../allwinner/sun50i-h616-bigtreetech-pi.dts | 68 +++++++++++++++++++
2 files changed, 69 insertions(+)
create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-h616-bigtreetech-pi.dts
diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile
index 7b386428510b..0b6232a7f328 100644
--- a/arch/arm64/boot/dts/allwinner/Makefile
+++ b/arch/arm64/boot/dts/allwinner/Makefile
@@ -39,5 +39,6 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-pine-h64-model-b.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-tanix-tx6.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-tanix-tx6-mini.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h616-bigtreetech-cb1-manta.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h616-bigtreetech-pi.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h616-orangepi-zero2.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h616-x96-mate.dtb
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616-bigtreetech-pi.dts b/arch/arm64/boot/dts/allwinner/sun50i-h616-bigtreetech-pi.dts
new file mode 100644
index 000000000000..cbeedf147ab6
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h616-bigtreetech-pi.dts
@@ -0,0 +1,68 @@
+// SPDX-License-Identifier: (GPL-2.0+ or MIT)
+/*
+ * Copyright (C) 2023 Martin Botka <[email protected]>.
+ */
+
+/dts-v1/;
+
+#include "sun50i-h616-bigtreetech-cb1.dtsi"
+
+/ {
+ model = "BigTreeTech Pi"
+ compatible = "bigtreetech,pi", "allwinner,sun50i-h616";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&ehci2 {
+ status = "okay";
+};
+
+&ehci3 {
+ status = "okay";
+};
+
+&ir {
+ status = "okay";
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&ohci1 {
+ status = "okay";
+};
+
+&ohci2 {
+ status = "okay";
+};
+
+&ohci3 {
+ status = "okay";
+};
+
+&spi0 {
+ /* SPI connection for onboard connector for ADXL345 accelerometer */
+ status = "okay";
+}
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_ph_pins>;
+ status = "okay";
+};
--
2.41.0
On Fri, 4 Aug 2023 11:00:32 +0200
Martin Botka <[email protected]> wrote:
Hi,
> The BigTreeTech Pi is an H616 based board based on CB1.
> Just in Rpi format board.
>
> It features the same internals as BTT CB1 but adds:
> - Fan port
> - IR receiver
> - ADXL345 Accelerometer connector via SPI
> - 24V DC power supply via terminal plugs
> - USB to CAN module connector (The actual USB to CAN happens on the external module)
>
> List of currently working things is same as BTT CB1 but also:
> - IR receiver
> - ADXL345 connector
>
> Signed-off-by: Martin Botka <[email protected]>
> ---
> Changes in V2:
> - Add UART alongside aliases and chosen for it
> - Add model string
> - Enable IR receiver
> - Enable SPI0 for ADXL345 connector
>
> arch/arm64/boot/dts/allwinner/Makefile | 1 +
> .../allwinner/sun50i-h616-bigtreetech-pi.dts | 68 +++++++++++++++++++
> 2 files changed, 69 insertions(+)
> create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-h616-bigtreetech-pi.dts
>
> diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile
> index 7b386428510b..0b6232a7f328 100644
> --- a/arch/arm64/boot/dts/allwinner/Makefile
> +++ b/arch/arm64/boot/dts/allwinner/Makefile
> @@ -39,5 +39,6 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-pine-h64-model-b.dtb
> dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-tanix-tx6.dtb
> dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-tanix-tx6-mini.dtb
> dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h616-bigtreetech-cb1-manta.dtb
> +dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h616-bigtreetech-pi.dtb
> dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h616-orangepi-zero2.dtb
> dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h616-x96-mate.dtb
> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616-bigtreetech-pi.dts b/arch/arm64/boot/dts/allwinner/sun50i-h616-bigtreetech-pi.dts
> new file mode 100644
> index 000000000000..cbeedf147ab6
> --- /dev/null
> +++ b/arch/arm64/boot/dts/allwinner/sun50i-h616-bigtreetech-pi.dts
> @@ -0,0 +1,68 @@
> +// SPDX-License-Identifier: (GPL-2.0+ or MIT)
> +/*
> + * Copyright (C) 2023 Martin Botka <[email protected]>.
> + */
> +
> +/dts-v1/;
> +
> +#include "sun50i-h616-bigtreetech-cb1.dtsi"
> +
> +/ {
> + model = "BigTreeTech Pi"
missing semicolon
> + compatible = "bigtreetech,pi", "allwinner,sun50i-h616";
> +
> + aliases {
> + serial0 = &uart0;
> + };
> +
> + chosen {
> + stdout-path = "serial0:115200n8";
> + };
> +};
> +
> +&ehci0 {
> + status = "okay";
> +};
> +
> +&ehci1 {
> + status = "okay";
> +};
> +
> +&ehci2 {
> + status = "okay";
> +};
> +
> +&ehci3 {
> + status = "okay";
> +};
> +
> +&ir {
> + status = "okay";
> +};
> +
> +&ohci0 {
> + status = "okay";
> +};
> +
> +&ohci1 {
> + status = "okay";
> +};
> +
> +&ohci2 {
> + status = "okay";
> +};
> +
> +&ohci3 {
> + status = "okay";
> +};
> +
> +&spi0 {
> + /* SPI connection for onboard connector for ADXL345 accelerometer */
You need to specify the pinctrl properties here, since there is no
default. I guess it's PortC? Then you can copy from the OPiZero2, just
check the CS situation.
> + status = "okay";
> +}
missing semicolon;
Rest looks fine.
Thanks,
Andre
> +
> +&uart0 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&uart0_ph_pins>;
> + status = "okay";
> +};