Add support for the RTQ2208 SubPMIC
This ic integrates with configurable, synchrnous buck converters and two
ldos.
Signed-off-by: Alina Yu <[email protected]>
Reported-by: kernel test robot <[email protected]>
---
v5
- Modify 'rdesc->fixed_uV' get, becasue "richtek,fixed-uV" is removed from yaml
- Modify 'mtp_sel' get because read property is changed from "richtek,mtp-sel" to
"richtek,mtp-sel-high" in yaml
- Add missing regulators_node points to regulator node in yaml
- Include <linux/bitfield.h> for 'FIELD_PREP' reported by kernel test robot
---
drivers/regulator/Kconfig | 11 +
drivers/regulator/Makefile | 1 +
drivers/regulator/rtq2208-regulator.c | 549 ++++++++++++++++++++++++++++++++++
3 files changed, 561 insertions(+)
create mode 100644 drivers/regulator/rtq2208-regulator.c
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index e5f3613..a6b2c84 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -1213,6 +1213,17 @@ config REGULATOR_RTQ6752
synchronous boost converters for PAVDD, and one synchronous NAVDD
buck-boost. This device is suitable for automotive TFT-LCD panel.
+config REGULATOR_RTQ2208
+ tristate "Richtek RTQ2208 SubPMIC Regulator"
+ depends on I2C
+ select REGMAP_I2C
+ help
+ This driver adds support for RTQ2208 SubPMIC regulators.
+ The RTQ2208 is a multi-phase, programmable power management IC that
+ integrate with dual multi-configurable, synchronous buck converters
+ and two ldos. It features wide output voltage range from 0.4V to 2.05V
+ and the capability to configure the corresponding power stages.
+
config REGULATOR_S2MPA01
tristate "Samsung S2MPA01 voltage regulator"
depends on MFD_SEC_CORE || COMPILE_TEST
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index 58dfe01..04cbad17 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -143,6 +143,7 @@ obj-$(CONFIG_REGULATOR_RT6245) += rt6245-regulator.o
obj-$(CONFIG_REGULATOR_RTMV20) += rtmv20-regulator.o
obj-$(CONFIG_REGULATOR_RTQ2134) += rtq2134-regulator.o
obj-$(CONFIG_REGULATOR_RTQ6752) += rtq6752-regulator.o
+obj-$(CONFIG_REGULATOR_RTQ2208) += rtq2208-regulator.o
obj-$(CONFIG_REGULATOR_S2MPA01) += s2mpa01.o
obj-$(CONFIG_REGULATOR_S2MPS11) += s2mps11.o
obj-$(CONFIG_REGULATOR_S5M8767) += s5m8767.o
diff --git a/drivers/regulator/rtq2208-regulator.c b/drivers/regulator/rtq2208-regulator.c
new file mode 100644
index 0000000..2cfbc68
--- /dev/null
+++ b/drivers/regulator/rtq2208-regulator.c
@@ -0,0 +1,549 @@
+// SPDX-License-Identifier: GPL-2.0+
+
+#include <linux/bitops.h>
+#include <linux/bitfield.h>
+#include <linux/util_macros.h>
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/regmap.h>
+#include <linux/regulator/driver.h>
+
+/* Register */
+#define RTQ2208_REG_GLOBAL_INT1 0x12
+#define RTQ2208_REG_FLT_RECORDBUCK_CB 0x18
+#define RTQ2208_REG_GLOBAL_INT1_MASK 0x1D
+#define RTQ2208_REG_FLT_MASKBUCK_CB 0x1F
+#define RTQ2208_REG_BUCK_C_CFG0 0x32
+#define RTQ2208_REG_BUCK_B_CFG0 0x42
+#define RTQ2208_REG_BUCK_A_CFG0 0x52
+#define RTQ2208_REG_BUCK_D_CFG0 0x62
+#define RTQ2208_REG_BUCK_G_CFG0 0x72
+#define RTQ2208_REG_BUCK_F_CFG0 0x82
+#define RTQ2208_REG_BUCK_E_CFG0 0x92
+#define RTQ2208_REG_BUCK_H_CFG0 0xA2
+#define RTQ2208_REG_LDO1_CFG 0xB1
+#define RTQ2208_REG_LDO2_CFG 0xC1
+
+/* Mask */
+#define RTQ2208_BUCK_NR_MTP_SEL_MASK GENMASK(7, 0)
+#define RTQ2208_BUCK_EN_NR_MTP_SEL0_MASK BIT(0)
+#define RTQ2208_BUCK_EN_NR_MTP_SEL1_MASK BIT(1)
+#define RTQ2208_BUCK_RSPUP_MASK GENMASK(6, 4)
+#define RTQ2208_BUCK_RSPDN_MASK GENMASK(2, 0)
+#define RTQ2208_BUCK_NRMODE_MASK BIT(5)
+#define RTQ2208_BUCK_STRMODE_MASK BIT(5)
+#define RTQ2208_BUCK_EN_STR_MASK BIT(0)
+#define RTQ2208_LDO_EN_STR_MASK BIT(7)
+#define RTQ2208_EN_DIS_MASK BIT(0)
+#define RTQ2208_BUCK_RAMP_SEL_MASK GENMASK(2, 0)
+#define RTQ2208_HD_INT_MASK BIT(0)
+
+/* Size */
+#define RTQ2208_VOUT_MAXNUM 256
+#define RTQ2208_BUCK_NUM_IRQ_REGS 5
+#define RTQ2208_STS_NUM_IRQ_REGS 2
+
+/* Value */
+#define RTQ2208_RAMP_VALUE_MIN_uV 500
+#define RTQ2208_RAMP_VALUE_MAX_uV 64000
+
+#define RTQ2208_BUCK_MASK(uv_irq, ov_irq) (1 << ((uv_irq) % 8) | 1 << ((ov_irq) % 8))
+
+enum {
+ RTQ2208_BUCK_B = 0,
+ RTQ2208_BUCK_C,
+ RTQ2208_BUCK_D,
+ RTQ2208_BUCK_A,
+ RTQ2208_BUCK_F,
+ RTQ2208_BUCK_G,
+ RTQ2208_BUCK_H,
+ RTQ2208_BUCK_E,
+ RTQ2208_LDO2,
+ RTQ2208_LDO1,
+ RTQ2208_LDO_MAX,
+};
+
+enum {
+ RTQ2208_AUTO_MODE = 0,
+ RTQ2208_FCCM,
+};
+
+struct rtq2208_regulator_desc {
+ struct regulator_desc desc;
+ unsigned int mtp_sel_reg;
+ unsigned int mtp_sel_mask;
+ unsigned int mode_reg;
+ unsigned int mode_mask;
+ unsigned int suspend_config_reg;
+ unsigned int suspend_enable_mask;
+ unsigned int suspend_mode_mask;
+ unsigned int fixed_uV;
+};
+
+struct rtq2208_rdev_map {
+ struct regulator_dev *rdev[RTQ2208_LDO_MAX];
+ struct regmap *regmap;
+ struct device *dev;
+};
+
+/* set Normal Auto/FCCM mode */
+static int rtq2208_set_mode(struct regulator_dev *rdev, unsigned int mode)
+{
+ struct rtq2208_regulator_desc *rdesc =
+ (struct rtq2208_regulator_desc *)rdev->desc;
+ unsigned int val, shift;
+
+ switch (mode) {
+ case REGULATOR_MODE_NORMAL:
+ val = RTQ2208_AUTO_MODE;
+ break;
+ case REGULATOR_MODE_FAST:
+ val = RTQ2208_FCCM;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ shift = ffs(rdesc->mode_mask) - 1;
+ return regmap_update_bits(rdev->regmap, rdesc->mode_reg,
+ rdesc->mode_mask, val << shift);
+}
+
+static unsigned int rtq2208_get_mode(struct regulator_dev *rdev)
+{
+ struct rtq2208_regulator_desc *rdesc =
+ (struct rtq2208_regulator_desc *)rdev->desc;
+ unsigned int mode_val;
+ int ret;
+
+ ret = regmap_read(rdev->regmap, rdesc->mode_reg, &mode_val);
+ if (ret)
+ return REGULATOR_MODE_INVALID;
+
+ return (mode_val & rdesc->mode_mask) ? REGULATOR_MODE_FAST : REGULATOR_MODE_NORMAL;
+}
+
+static int rtq2208_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay)
+{
+ const struct regulator_desc *rdesc = rdev->desc;
+ unsigned int sel = 0, val;
+
+ ramp_delay = max(ramp_delay, RTQ2208_RAMP_VALUE_MIN_uV);
+ ramp_delay = min(ramp_delay, RTQ2208_RAMP_VALUE_MAX_uV);
+
+ ramp_delay /= RTQ2208_RAMP_VALUE_MIN_uV;
+
+ /*
+ * fls(ramp_delay) - 1: doing LSB shift, let it starts from 0
+ *
+ * RTQ2208_BUCK_RAMP_SEL_MASK - sel: doing descending order shifting.
+ * Because the relation of seleltion and value is like that
+ *
+ * seletion: value
+ * 000: 64mv
+ * 001: 32mv
+ * ...
+ * 111: 0.5mv
+ *
+ * For example, if I would like to select 64mv, the fls(ramp_delay) - 1 will be 0b111,
+ * and I need to use 0b111 - sel to do the shifting
+ */
+
+ sel = fls(ramp_delay) - 1;
+ sel = RTQ2208_BUCK_RAMP_SEL_MASK - sel;
+
+ val = FIELD_PREP(RTQ2208_BUCK_RSPUP_MASK, sel) | FIELD_PREP(RTQ2208_BUCK_RSPDN_MASK, sel);
+
+ return regmap_update_bits(rdev->regmap, rdesc->ramp_reg,
+ RTQ2208_BUCK_RSPUP_MASK | RTQ2208_BUCK_RSPDN_MASK, val);
+}
+
+static int rtq2208_set_suspend_enable(struct regulator_dev *rdev)
+{
+ struct rtq2208_regulator_desc *rdesc =
+ (struct rtq2208_regulator_desc *)rdev->desc;
+
+ return regmap_set_bits(rdev->regmap, rdesc->suspend_config_reg, rdesc->suspend_enable_mask);
+}
+
+static int rtq2208_set_suspend_disable(struct regulator_dev *rdev)
+{
+ struct rtq2208_regulator_desc *rdesc =
+ (struct rtq2208_regulator_desc *)rdev->desc;
+
+ return regmap_update_bits(rdev->regmap, rdesc->suspend_config_reg, rdesc->suspend_enable_mask, 0);
+}
+
+static int rtq2208_set_suspend_mode(struct regulator_dev *rdev, unsigned int mode)
+{
+ struct rtq2208_regulator_desc *rdesc =
+ (struct rtq2208_regulator_desc *)rdev->desc;
+ unsigned int val, shift;
+
+ switch (mode) {
+ case REGULATOR_MODE_NORMAL:
+ val = RTQ2208_AUTO_MODE;
+ break;
+ case REGULATOR_MODE_FAST:
+ val = RTQ2208_FCCM;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ shift = ffs(rdesc->suspend_mode_mask) - 1;
+
+ return regmap_update_bits(rdev->regmap, rdesc->suspend_config_reg,
+ rdesc->suspend_mode_mask, val << shift);
+}
+
+static int rtq2208_ldo_get_voltage(struct regulator_dev *rdev)
+{
+ struct rtq2208_regulator_desc *rdesc =
+ (struct rtq2208_regulator_desc *)rdev->desc;
+
+ return rdesc->fixed_uV;
+}
+
+static const struct regulator_ops rtq2208_regulator_buck_ops = {
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .is_enabled = regulator_is_enabled_regmap,
+ .list_voltage = regulator_list_voltage_linear_range,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_mode = rtq2208_set_mode,
+ .get_mode = rtq2208_get_mode,
+ .set_ramp_delay = rtq2208_set_ramp_delay,
+ .set_active_discharge = regulator_set_active_discharge_regmap,
+ .set_suspend_enable = rtq2208_set_suspend_enable,
+ .set_suspend_disable = rtq2208_set_suspend_disable,
+ .set_suspend_mode = rtq2208_set_suspend_mode,
+};
+
+static const struct regulator_ops rtq2208_regulator_ldo_ops = {
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .is_enabled = regulator_is_enabled_regmap,
+ .set_active_discharge = regulator_set_active_discharge_regmap,
+ .set_suspend_enable = rtq2208_set_suspend_enable,
+ .set_suspend_disable = rtq2208_set_suspend_disable,
+ .get_voltage = rtq2208_ldo_get_voltage,
+};
+
+static int rtq2208_of_parse_cb(struct device_node *np,
+ const struct regulator_desc *desc,
+ struct regulator_config *config)
+{
+ struct rtq2208_regulator_desc *rdesc =
+ (struct rtq2208_regulator_desc *)desc;
+ u32 min_uV, max_uV;
+ int ret;
+
+ ret = of_property_read_u32(np, "regulator-min-microvolt", &min_uV);
+ if (ret)
+ return ret;
+
+ ret = of_property_read_u32(np, "regulator-max-microvolt", &max_uV);
+ if (ret)
+ return ret;
+
+ if (min_uV == max_uV)
+ rdesc->fixed_uV = min_uV;
+
+ return ret;
+}
+
+static unsigned int rtq2208_of_map_mode(unsigned int mode)
+{
+ switch (mode) {
+ case RTQ2208_AUTO_MODE:
+ return REGULATOR_MODE_NORMAL;
+ case RTQ2208_FCCM:
+ return REGULATOR_MODE_FAST;
+ default:
+ return REGULATOR_MODE_INVALID;
+ }
+}
+
+static int rtq2208_init_irq_mask(struct rtq2208_rdev_map *rdev_map, unsigned int *buck_masks)
+{
+ unsigned char buck_clr_masks[5] = {0x33, 0x33, 0x33, 0x33, 0x33},
+ sts_clr_masks[2] = {0xE7, 0xF7}, sts_masks[2] = {0xE6, 0xF6};
+ int ret;
+
+ /* write clear all buck irq once */
+ ret = regmap_bulk_write(rdev_map->regmap, RTQ2208_REG_FLT_RECORDBUCK_CB, buck_clr_masks, 5);
+ if (ret)
+ return dev_err_probe(rdev_map->dev, ret, "Failed to clr buck irqs\n");
+
+ /* write clear general irq once */
+ ret = regmap_bulk_write(rdev_map->regmap, RTQ2208_REG_GLOBAL_INT1, sts_clr_masks, 2);
+ if (ret)
+ return dev_err_probe(rdev_map->dev, ret, "Failed to clr general irqs\n");
+
+ /* unmask buck ov/uv irq */
+ ret = regmap_bulk_write(rdev_map->regmap, RTQ2208_REG_FLT_MASKBUCK_CB, buck_masks, 5);
+ if (ret)
+ return dev_err_probe(rdev_map->dev, ret, "Failed to unmask buck irqs\n");
+
+ /* unmask needed general irq */
+ return regmap_bulk_write(rdev_map->regmap, RTQ2208_REG_GLOBAL_INT1_MASK, sts_masks, 2);
+}
+
+static irqreturn_t rtq2208_irq_handler(int irqno, void *devid)
+{
+ unsigned char buck_flags[RTQ2208_BUCK_NUM_IRQ_REGS], sts_flags[RTQ2208_STS_NUM_IRQ_REGS];
+ int ret = 0, i, uv_bit, ov_bit;
+ struct rtq2208_rdev_map *rdev_map = devid;
+ struct regulator_dev *rdev;
+
+ if (!rdev_map)
+ return IRQ_NONE;
+
+ /* read irq event */
+ ret = regmap_bulk_read(rdev_map->regmap, RTQ2208_REG_FLT_RECORDBUCK_CB,
+ buck_flags, ARRAY_SIZE(buck_flags));
+ if (ret)
+ return IRQ_NONE;
+
+ ret = regmap_bulk_read(rdev_map->regmap, RTQ2208_REG_GLOBAL_INT1,
+ sts_flags, ARRAY_SIZE(sts_flags));
+ if (ret)
+ return IRQ_NONE;
+
+ /* clear irq event */
+ ret = regmap_bulk_write(rdev_map->regmap, RTQ2208_REG_FLT_RECORDBUCK_CB,
+ buck_flags, ARRAY_SIZE(buck_flags));
+ if (ret)
+ return IRQ_NONE;
+
+ ret = regmap_bulk_write(rdev_map->regmap, RTQ2208_REG_GLOBAL_INT1,
+ sts_flags, ARRAY_SIZE(sts_flags));
+ if (ret)
+ return IRQ_NONE;
+
+ for (i = 0; i < RTQ2208_LDO_MAX; i++) {
+ if (!rdev_map->rdev[i])
+ continue;
+
+ rdev = rdev_map->rdev[i];
+ /* uv irq */
+ uv_bit = (i & 1) ? 4 : 0;
+ if (buck_flags[i >> 1] & (1 << uv_bit))
+ regulator_notifier_call_chain(rdev,
+ REGULATOR_EVENT_UNDER_VOLTAGE, NULL);
+ /* ov irq */
+ ov_bit = uv_bit + 1;
+ if (buck_flags[i >> 1] & (1 << ov_bit))
+ regulator_notifier_call_chain(rdev,
+ REGULATOR_EVENT_REGULATION_OUT, NULL);
+
+ /* hd irq */
+ if (sts_flags[1] & RTQ2208_HD_INT_MASK)
+ regulator_notifier_call_chain(rdev,
+ REGULATOR_EVENT_OVER_TEMP, NULL);
+ }
+
+ return IRQ_HANDLED;
+}
+
+#define RTQ2208_REGULATOR_INFO(_name, _base) \
+{ \
+ .name = #_name, \
+ .base = _base, \
+}
+#define BUCK_RG_BASE(_id) RTQ2208_REG_BUCK_##_id##_CFG0
+#define BUCK_RG_SHIFT(_base, _shift) (_base + _shift)
+#define LDO_RG_BASE(_id) RTQ2208_REG_LDO##_id##_CFG
+#define LDO_RG_SHIFT(_base, _shift) (_base + _shift)
+#define VSEL_SHIFT(_sel) (_sel ? 3 : 1)
+#define MTP_SEL_MASK(_sel) RTQ2208_BUCK_EN_NR_MTP_SEL##_sel##_MASK
+
+static const struct linear_range rtq2208_vout_range[] = {
+ REGULATOR_LINEAR_RANGE(400000, 0, 180, 5000),
+ REGULATOR_LINEAR_RANGE(1310000, 181, 255, 10000),
+};
+
+static void rtq2208_init_regulator_desc(struct rtq2208_regulator_desc *rdesc, int mtp_sel, int idx)
+{
+ struct regulator_desc *desc;
+ static const struct {
+ char *name;
+ int base;
+ } regulator_info[] = {
+ RTQ2208_REGULATOR_INFO(buck-b, BUCK_RG_BASE(B)),
+ RTQ2208_REGULATOR_INFO(buck-c, BUCK_RG_BASE(C)),
+ RTQ2208_REGULATOR_INFO(buck-d, BUCK_RG_BASE(D)),
+ RTQ2208_REGULATOR_INFO(buck-a, BUCK_RG_BASE(A)),
+ RTQ2208_REGULATOR_INFO(buck-f, BUCK_RG_BASE(F)),
+ RTQ2208_REGULATOR_INFO(buck-g, BUCK_RG_BASE(G)),
+ RTQ2208_REGULATOR_INFO(buck-h, BUCK_RG_BASE(H)),
+ RTQ2208_REGULATOR_INFO(buck-e, BUCK_RG_BASE(E)),
+ RTQ2208_REGULATOR_INFO(ldo2, LDO_RG_BASE(2)),
+ RTQ2208_REGULATOR_INFO(ldo1, LDO_RG_BASE(1)),
+ }, *curr_info;
+
+ curr_info = regulator_info + idx;
+ desc = &rdesc->desc;
+ desc->name = curr_info->name;
+ desc->of_match = of_match_ptr(curr_info->name);
+ desc->regulators_node = of_match_ptr("regulators");
+ desc->id = idx;
+ desc->owner = THIS_MODULE;
+ desc->type = REGULATOR_VOLTAGE;
+ desc->enable_mask = mtp_sel ? MTP_SEL_MASK(1) : MTP_SEL_MASK(0);
+ desc->active_discharge_on = RTQ2208_EN_DIS_MASK;
+ desc->active_discharge_off = 0;
+ desc->active_discharge_mask = RTQ2208_EN_DIS_MASK;
+
+ rdesc->mode_mask = RTQ2208_BUCK_NRMODE_MASK;
+
+ if (idx >= RTQ2208_BUCK_B && idx <= RTQ2208_BUCK_E) {
+ /* init buck desc */
+ desc->enable_reg = BUCK_RG_SHIFT(curr_info->base, 2);
+ desc->ops = &rtq2208_regulator_buck_ops;
+ desc->vsel_reg = curr_info->base + VSEL_SHIFT(mtp_sel);
+ desc->vsel_mask = RTQ2208_BUCK_NR_MTP_SEL_MASK;
+ desc->n_voltages = RTQ2208_VOUT_MAXNUM;
+ desc->linear_ranges = rtq2208_vout_range;
+ desc->n_linear_ranges = ARRAY_SIZE(rtq2208_vout_range);
+ desc->ramp_reg = BUCK_RG_SHIFT(curr_info->base, 5);
+ desc->active_discharge_reg = curr_info->base;
+ desc->of_map_mode = rtq2208_of_map_mode;
+
+ rdesc->mode_reg = BUCK_RG_SHIFT(curr_info->base, 2);
+ rdesc->suspend_config_reg = BUCK_RG_SHIFT(curr_info->base, 4);
+ rdesc->suspend_enable_mask = RTQ2208_BUCK_EN_STR_MASK;
+ rdesc->suspend_mode_mask = RTQ2208_BUCK_STRMODE_MASK;
+ } else {
+ /* init ldo desc */
+ desc->enable_reg = curr_info->base;
+ desc->ops = &rtq2208_regulator_ldo_ops;
+ desc->n_voltages = 1;
+ desc->active_discharge_reg = LDO_RG_SHIFT(curr_info->base, 2);
+ desc->of_parse_cb = rtq2208_of_parse_cb;
+
+ rdesc->suspend_config_reg = curr_info->base;
+ rdesc->suspend_enable_mask = RTQ2208_LDO_EN_STR_MASK;
+ }
+}
+
+/** different slave address corresponds different used bucks
+ * slave address 0x10: BUCK[BCA FGE]
+ * slave address 0x20: BUCK[BC FGHE]
+ * slave address 0x40: BUCK[C G]
+ */
+static int rtq2208_regulator_check(int slave_addr, int *num, int *regulator_idx_table, unsigned int *buck_masks)
+{
+ static bool rtq2208_used_table[3][RTQ2208_LDO_MAX] = {
+ /* BUCK[BCA FGE], LDO[12] */
+ {1, 1, 0, 1, 1, 1, 0, 1, 1, 1},
+ /* BUCK[BC FGHE], LDO[12]*/
+ {1, 1, 0, 0, 1, 1, 1, 1, 1, 1},
+ /* BUCK[C G], LDO[12] */
+ {0, 1, 0, 0, 0, 1, 0, 0, 1, 1},
+ };
+ int i, idx = ffs(slave_addr >> 4) - 1;
+ u8 mask;
+
+ for (i = 0; i < RTQ2208_LDO_MAX; i++) {
+ if (!rtq2208_used_table[idx][i])
+ continue;
+
+ regulator_idx_table[(*num)++] = i;
+
+ mask = RTQ2208_BUCK_MASK(4 * i, 4 * i + 1);
+ buck_masks[i >> 1] &= ~mask;
+ }
+
+ return 0;
+}
+
+static const struct regmap_config rtq2208_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .max_register = 0xEF,
+};
+
+static int rtq2208_probe(struct i2c_client *i2c)
+{
+ struct device *dev = &i2c->dev;
+ struct regmap *regmap;
+ struct rtq2208_regulator_desc *rdesc;
+ struct regulator_dev *rdev;
+ struct regulator_config cfg;
+ struct rtq2208_rdev_map *rdev_map;
+ int i, ret = 0, idx, mtp_sel, n_regulator = 0;
+ unsigned int regulator_idx_table[RTQ2208_LDO_MAX],
+ buck_masks[RTQ2208_BUCK_NUM_IRQ_REGS] = {0x33, 0x33, 0x33, 0x33, 0x33};
+
+ rdev_map = devm_kzalloc(dev, sizeof(struct rtq2208_rdev_map), GFP_KERNEL);
+ if (!rdev_map)
+ return -ENOMEM;
+
+ /* get mtp_sel0 or mtp_sel1 */
+ mtp_sel = device_property_read_bool(dev, "richtek,mtp-sel-high");
+
+ regmap = devm_regmap_init_i2c(i2c, &rtq2208_regmap_config);
+ if (IS_ERR(regmap))
+ return dev_err_probe(dev, PTR_ERR(regmap), "Failed to allocate regmap\n");
+
+ /* get needed regulator */
+ ret = rtq2208_regulator_check(i2c->addr, &n_regulator, regulator_idx_table, buck_masks);
+ if (ret)
+ return dev_err_probe(dev, ret, "Failed to check used regulators\n");
+
+ rdev_map->regmap = regmap;
+ rdev_map->dev = dev;
+
+ cfg.dev = dev;
+
+ for (i = 0; i < n_regulator; i++) {
+ idx = regulator_idx_table[i];
+
+ rdesc = devm_kcalloc(dev, 1, sizeof(struct rtq2208_regulator_desc), GFP_KERNEL);
+ if (!rdesc)
+ return -ENOMEM;
+
+ /* init regulator desc */
+ rtq2208_init_regulator_desc(rdesc, mtp_sel, idx);
+
+ /* regiser regulator */
+ rdev = devm_regulator_register(dev, &rdesc->desc, &cfg);
+ if (IS_ERR(rdev))
+ return PTR_ERR(rdev);
+
+ rdev_map->rdev[idx] = rdev;
+ }
+
+ /* init interrupt mask */
+ ret = rtq2208_init_irq_mask(rdev_map, buck_masks);
+ if (ret)
+ return ret;
+
+ /* register interrupt */
+ ret = devm_request_threaded_irq(dev, i2c->irq, NULL, rtq2208_irq_handler,
+ IRQF_ONESHOT, dev_name(dev), rdev_map);
+
+ return ret;
+}
+
+static const struct of_device_id __maybe_unused rtq2208_device_tables[] = {
+ { .compatible = "richtek,rtq2208", },
+ {}
+};
+MODULE_DEVICE_TABLE(of, rtq2208_device_tables);
+
+static struct i2c_driver rtq2208_driver = {
+ .driver = {
+ .name = "rtq2208",
+ .of_match_table = rtq2208_device_tables,
+ },
+ .probe_new = rtq2208_probe,
+};
+module_i2c_driver(rtq2208_driver);
+
+MODULE_AUTHOR("Alina Yu <[email protected]>");
+MODULE_DESCRIPTION("Richtek RTQ2208 Regulator Driver");
+MODULE_LICENSE("GPL v2");
--
2.7.4
Hi,
On Wed, Jul 26, 2023 at 03:13:12PM +0800, Alina Yu wrote:
> Add support for the RTQ2208 SubPMIC
> This ic integrates with configurable, synchrnous buck converters and two
> ldos.
>
> Signed-off-by: Alina Yu <[email protected]>
> Reported-by: kernel test robot <[email protected]>
This patch series is to add new drivers, not fix.
Why do you add the Reported-by tag?
> ---
> v5
> - Modify 'rdesc->fixed_uV' get, becasue "richtek,fixed-uV" is removed from yaml
> - Modify 'mtp_sel' get because read property is changed from "richtek,mtp-sel" to
> "richtek,mtp-sel-high" in yaml
> - Add missing regulators_node points to regulator node in yaml
> - Include <linux/bitfield.h> for 'FIELD_PREP' reported by kernel test robot
> ---
> drivers/regulator/Kconfig | 11 +
> drivers/regulator/Makefile | 1 +
> drivers/regulator/rtq2208-regulator.c | 549 ++++++++++++++++++++++++++++++++++
> 3 files changed, 561 insertions(+)
> create mode 100644 drivers/regulator/rtq2208-regulator.c
>
> diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
> index e5f3613..a6b2c84 100644
> --- a/drivers/regulator/Kconfig
> +++ b/drivers/regulator/Kconfig
> @@ -1213,6 +1213,17 @@ config REGULATOR_RTQ6752
> synchronous boost converters for PAVDD, and one synchronous NAVDD
> buck-boost. This device is suitable for automotive TFT-LCD panel.
>
> +config REGULATOR_RTQ2208
> + tristate "Richtek RTQ2208 SubPMIC Regulator"
> + depends on I2C
> + select REGMAP_I2C
> + help
> + This driver adds support for RTQ2208 SubPMIC regulators.
> + The RTQ2208 is a multi-phase, programmable power management IC that
> + integrate with dual multi-configurable, synchronous buck converters
> + and two ldos. It features wide output voltage range from 0.4V to 2.05V
> + and the capability to configure the corresponding power stages.
> +
> config REGULATOR_S2MPA01
> tristate "Samsung S2MPA01 voltage regulator"
> depends on MFD_SEC_CORE || COMPILE_TEST
> diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
> index 58dfe01..04cbad17 100644
> --- a/drivers/regulator/Makefile
> +++ b/drivers/regulator/Makefile
> @@ -143,6 +143,7 @@ obj-$(CONFIG_REGULATOR_RT6245) += rt6245-regulator.o
> obj-$(CONFIG_REGULATOR_RTMV20) += rtmv20-regulator.o
> obj-$(CONFIG_REGULATOR_RTQ2134) += rtq2134-regulator.o
> obj-$(CONFIG_REGULATOR_RTQ6752) += rtq6752-regulator.o
> +obj-$(CONFIG_REGULATOR_RTQ2208) += rtq2208-regulator.o
> obj-$(CONFIG_REGULATOR_S2MPA01) += s2mpa01.o
> obj-$(CONFIG_REGULATOR_S2MPS11) += s2mps11.o
> obj-$(CONFIG_REGULATOR_S5M8767) += s5m8767.o
> diff --git a/drivers/regulator/rtq2208-regulator.c b/drivers/regulator/rtq2208-regulator.c
> new file mode 100644
> index 0000000..2cfbc68
> --- /dev/null
> +++ b/drivers/regulator/rtq2208-regulator.c
> @@ -0,0 +1,549 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +
> +#include <linux/bitops.h>
> +#include <linux/bitfield.h>
> +#include <linux/util_macros.h>
> +#include <linux/module.h>
> +#include <linux/i2c.h>
> +#include <linux/regmap.h>
> +#include <linux/regulator/driver.h>
It seems you forgot to include mod_devicetable.h
> +
> +/* Register */
> +#define RTQ2208_REG_GLOBAL_INT1 0x12
> +#define RTQ2208_REG_FLT_RECORDBUCK_CB 0x18
> +#define RTQ2208_REG_GLOBAL_INT1_MASK 0x1D
> +#define RTQ2208_REG_FLT_MASKBUCK_CB 0x1F
> +#define RTQ2208_REG_BUCK_C_CFG0 0x32
> +#define RTQ2208_REG_BUCK_B_CFG0 0x42
> +#define RTQ2208_REG_BUCK_A_CFG0 0x52
> +#define RTQ2208_REG_BUCK_D_CFG0 0x62
> +#define RTQ2208_REG_BUCK_G_CFG0 0x72
> +#define RTQ2208_REG_BUCK_F_CFG0 0x82
> +#define RTQ2208_REG_BUCK_E_CFG0 0x92
> +#define RTQ2208_REG_BUCK_H_CFG0 0xA2
> +#define RTQ2208_REG_LDO1_CFG 0xB1
> +#define RTQ2208_REG_LDO2_CFG 0xC1
> +
> +/* Mask */
> +#define RTQ2208_BUCK_NR_MTP_SEL_MASK GENMASK(7, 0)
> +#define RTQ2208_BUCK_EN_NR_MTP_SEL0_MASK BIT(0)
> +#define RTQ2208_BUCK_EN_NR_MTP_SEL1_MASK BIT(1)
> +#define RTQ2208_BUCK_RSPUP_MASK GENMASK(6, 4)
> +#define RTQ2208_BUCK_RSPDN_MASK GENMASK(2, 0)
> +#define RTQ2208_BUCK_NRMODE_MASK BIT(5)
> +#define RTQ2208_BUCK_STRMODE_MASK BIT(5)
> +#define RTQ2208_BUCK_EN_STR_MASK BIT(0)
> +#define RTQ2208_LDO_EN_STR_MASK BIT(7)
> +#define RTQ2208_EN_DIS_MASK BIT(0)
> +#define RTQ2208_BUCK_RAMP_SEL_MASK GENMASK(2, 0)
> +#define RTQ2208_HD_INT_MASK BIT(0)
> +
> +/* Size */
> +#define RTQ2208_VOUT_MAXNUM 256
> +#define RTQ2208_BUCK_NUM_IRQ_REGS 5
> +#define RTQ2208_STS_NUM_IRQ_REGS 2
> +
> +/* Value */
> +#define RTQ2208_RAMP_VALUE_MIN_uV 500
> +#define RTQ2208_RAMP_VALUE_MAX_uV 64000
> +
> +#define RTQ2208_BUCK_MASK(uv_irq, ov_irq) (1 << ((uv_irq) % 8) | 1 << ((ov_irq) % 8))
> +
> +enum {
> + RTQ2208_BUCK_B = 0,
> + RTQ2208_BUCK_C,
> + RTQ2208_BUCK_D,
> + RTQ2208_BUCK_A,
> + RTQ2208_BUCK_F,
> + RTQ2208_BUCK_G,
> + RTQ2208_BUCK_H,
> + RTQ2208_BUCK_E,
> + RTQ2208_LDO2,
> + RTQ2208_LDO1,
> + RTQ2208_LDO_MAX,
> +};
> +
> +enum {
> + RTQ2208_AUTO_MODE = 0,
> + RTQ2208_FCCM,
> +};
> +
> +struct rtq2208_regulator_desc {
> + struct regulator_desc desc;
> + unsigned int mtp_sel_reg;
> + unsigned int mtp_sel_mask;
> + unsigned int mode_reg;
> + unsigned int mode_mask;
> + unsigned int suspend_config_reg;
> + unsigned int suspend_enable_mask;
> + unsigned int suspend_mode_mask;
> + unsigned int fixed_uV;
This is duplicated with the member 'fixed_uV' in struct regulator_desc.
> +};
> +
> +struct rtq2208_rdev_map {
> + struct regulator_dev *rdev[RTQ2208_LDO_MAX];
> + struct regmap *regmap;
> + struct device *dev;
> +};
> +
> +/* set Normal Auto/FCCM mode */
> +static int rtq2208_set_mode(struct regulator_dev *rdev, unsigned int mode)
> +{
> + struct rtq2208_regulator_desc *rdesc =
> + (struct rtq2208_regulator_desc *)rdev->desc;
> + unsigned int val, shift;
> +
> + switch (mode) {
> + case REGULATOR_MODE_NORMAL:
> + val = RTQ2208_AUTO_MODE;
> + break;
> + case REGULATOR_MODE_FAST:
> + val = RTQ2208_FCCM;
> + break;
> + default:
> + return -EINVAL;
> + }
> +
> + shift = ffs(rdesc->mode_mask) - 1;
> + return regmap_update_bits(rdev->regmap, rdesc->mode_reg,
> + rdesc->mode_mask, val << shift);
> +}
> +
> +static unsigned int rtq2208_get_mode(struct regulator_dev *rdev)
> +{
> + struct rtq2208_regulator_desc *rdesc =
> + (struct rtq2208_regulator_desc *)rdev->desc;
> + unsigned int mode_val;
> + int ret;
> +
> + ret = regmap_read(rdev->regmap, rdesc->mode_reg, &mode_val);
> + if (ret)
> + return REGULATOR_MODE_INVALID;
> +
> + return (mode_val & rdesc->mode_mask) ? REGULATOR_MODE_FAST : REGULATOR_MODE_NORMAL;
> +}
> +
> +static int rtq2208_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay)
> +{
> + const struct regulator_desc *rdesc = rdev->desc;
> + unsigned int sel = 0, val;
> +
> + ramp_delay = max(ramp_delay, RTQ2208_RAMP_VALUE_MIN_uV);
> + ramp_delay = min(ramp_delay, RTQ2208_RAMP_VALUE_MAX_uV);
> +
> + ramp_delay /= RTQ2208_RAMP_VALUE_MIN_uV;
> +
> + /*
> + * fls(ramp_delay) - 1: doing LSB shift, let it starts from 0
> + *
> + * RTQ2208_BUCK_RAMP_SEL_MASK - sel: doing descending order shifting.
> + * Because the relation of seleltion and value is like that
> + *
> + * seletion: value
> + * 000: 64mv
> + * 001: 32mv
> + * ...
> + * 111: 0.5mv
> + *
> + * For example, if I would like to select 64mv, the fls(ramp_delay) - 1 will be 0b111,
> + * and I need to use 0b111 - sel to do the shifting
> + */
> +
> + sel = fls(ramp_delay) - 1;
> + sel = RTQ2208_BUCK_RAMP_SEL_MASK - sel;
> +
> + val = FIELD_PREP(RTQ2208_BUCK_RSPUP_MASK, sel) | FIELD_PREP(RTQ2208_BUCK_RSPDN_MASK, sel);
> +
> + return regmap_update_bits(rdev->regmap, rdesc->ramp_reg,
> + RTQ2208_BUCK_RSPUP_MASK | RTQ2208_BUCK_RSPDN_MASK, val);
> +}
> +
> +static int rtq2208_set_suspend_enable(struct regulator_dev *rdev)
> +{
> + struct rtq2208_regulator_desc *rdesc =
> + (struct rtq2208_regulator_desc *)rdev->desc;
> +
> + return regmap_set_bits(rdev->regmap, rdesc->suspend_config_reg, rdesc->suspend_enable_mask);
> +}
> +
> +static int rtq2208_set_suspend_disable(struct regulator_dev *rdev)
> +{
> + struct rtq2208_regulator_desc *rdesc =
> + (struct rtq2208_regulator_desc *)rdev->desc;
> +
> + return regmap_update_bits(rdev->regmap, rdesc->suspend_config_reg, rdesc->suspend_enable_mask, 0);
> +}
> +
> +static int rtq2208_set_suspend_mode(struct regulator_dev *rdev, unsigned int mode)
> +{
> + struct rtq2208_regulator_desc *rdesc =
> + (struct rtq2208_regulator_desc *)rdev->desc;
> + unsigned int val, shift;
> +
> + switch (mode) {
> + case REGULATOR_MODE_NORMAL:
> + val = RTQ2208_AUTO_MODE;
> + break;
> + case REGULATOR_MODE_FAST:
> + val = RTQ2208_FCCM;
> + break;
> + default:
> + return -EINVAL;
> + }
> +
> + shift = ffs(rdesc->suspend_mode_mask) - 1;
> +
> + return regmap_update_bits(rdev->regmap, rdesc->suspend_config_reg,
> + rdesc->suspend_mode_mask, val << shift);
> +}
> +
> +static int rtq2208_ldo_get_voltage(struct regulator_dev *rdev)
If you use the 'fixed_uV' in regulator_desc, then this 'get_voltage' API is not needed.
> +{
> + struct rtq2208_regulator_desc *rdesc =
> + (struct rtq2208_regulator_desc *)rdev->desc;
> +
> + return rdesc->fixed_uV;
> +}
> +
> +static const struct regulator_ops rtq2208_regulator_buck_ops = {
> + .enable = regulator_enable_regmap,
> + .disable = regulator_disable_regmap,
> + .is_enabled = regulator_is_enabled_regmap,
> + .list_voltage = regulator_list_voltage_linear_range,
> + .set_voltage_sel = regulator_set_voltage_sel_regmap,
> + .get_voltage_sel = regulator_get_voltage_sel_regmap,
> + .set_mode = rtq2208_set_mode,
> + .get_mode = rtq2208_get_mode,
> + .set_ramp_delay = rtq2208_set_ramp_delay,
> + .set_active_discharge = regulator_set_active_discharge_regmap,
> + .set_suspend_enable = rtq2208_set_suspend_enable,
> + .set_suspend_disable = rtq2208_set_suspend_disable,
> + .set_suspend_mode = rtq2208_set_suspend_mode,
> +};
> +
> +static const struct regulator_ops rtq2208_regulator_ldo_ops = {
> + .enable = regulator_enable_regmap,
> + .disable = regulator_disable_regmap,
> + .is_enabled = regulator_is_enabled_regmap,
> + .set_active_discharge = regulator_set_active_discharge_regmap,
> + .set_suspend_enable = rtq2208_set_suspend_enable,
> + .set_suspend_disable = rtq2208_set_suspend_disable,
> + .get_voltage = rtq2208_ldo_get_voltage,
> +};
> +
> +static int rtq2208_of_parse_cb(struct device_node *np,
> + const struct regulator_desc *desc,
> + struct regulator_config *config)
> +{
> + struct rtq2208_regulator_desc *rdesc =
> + (struct rtq2208_regulator_desc *)desc;
> + u32 min_uV, max_uV;
> + int ret;
> +
> + ret = of_property_read_u32(np, "regulator-min-microvolt", &min_uV);
> + if (ret)
> + return ret;
> +
> + ret = of_property_read_u32(np, "regulator-max-microvolt", &max_uV);
> + if (ret)
> + return ret;
> +
> + if (min_uV == max_uV)
> + rdesc->fixed_uV = min_uV;
> +
> + return ret;
> +}
> +
> +static unsigned int rtq2208_of_map_mode(unsigned int mode)
> +{
> + switch (mode) {
> + case RTQ2208_AUTO_MODE:
> + return REGULATOR_MODE_NORMAL;
> + case RTQ2208_FCCM:
> + return REGULATOR_MODE_FAST;
> + default:
> + return REGULATOR_MODE_INVALID;
> + }
> +}
> +
> +static int rtq2208_init_irq_mask(struct rtq2208_rdev_map *rdev_map, unsigned int *buck_masks)
> +{
> + unsigned char buck_clr_masks[5] = {0x33, 0x33, 0x33, 0x33, 0x33},
> + sts_clr_masks[2] = {0xE7, 0xF7}, sts_masks[2] = {0xE6, 0xF6};
> + int ret;
> +
> + /* write clear all buck irq once */
> + ret = regmap_bulk_write(rdev_map->regmap, RTQ2208_REG_FLT_RECORDBUCK_CB, buck_clr_masks, 5);
> + if (ret)
> + return dev_err_probe(rdev_map->dev, ret, "Failed to clr buck irqs\n");
> +
> + /* write clear general irq once */
> + ret = regmap_bulk_write(rdev_map->regmap, RTQ2208_REG_GLOBAL_INT1, sts_clr_masks, 2);
> + if (ret)
> + return dev_err_probe(rdev_map->dev, ret, "Failed to clr general irqs\n");
> +
> + /* unmask buck ov/uv irq */
> + ret = regmap_bulk_write(rdev_map->regmap, RTQ2208_REG_FLT_MASKBUCK_CB, buck_masks, 5);
> + if (ret)
> + return dev_err_probe(rdev_map->dev, ret, "Failed to unmask buck irqs\n");
> +
> + /* unmask needed general irq */
> + return regmap_bulk_write(rdev_map->regmap, RTQ2208_REG_GLOBAL_INT1_MASK, sts_masks, 2);
> +}
> +
> +static irqreturn_t rtq2208_irq_handler(int irqno, void *devid)
> +{
> + unsigned char buck_flags[RTQ2208_BUCK_NUM_IRQ_REGS], sts_flags[RTQ2208_STS_NUM_IRQ_REGS];
> + int ret = 0, i, uv_bit, ov_bit;
> + struct rtq2208_rdev_map *rdev_map = devid;
> + struct regulator_dev *rdev;
> +
> + if (!rdev_map)
> + return IRQ_NONE;
> +
> + /* read irq event */
> + ret = regmap_bulk_read(rdev_map->regmap, RTQ2208_REG_FLT_RECORDBUCK_CB,
> + buck_flags, ARRAY_SIZE(buck_flags));
> + if (ret)
> + return IRQ_NONE;
> +
> + ret = regmap_bulk_read(rdev_map->regmap, RTQ2208_REG_GLOBAL_INT1,
> + sts_flags, ARRAY_SIZE(sts_flags));
> + if (ret)
> + return IRQ_NONE;
> +
> + /* clear irq event */
> + ret = regmap_bulk_write(rdev_map->regmap, RTQ2208_REG_FLT_RECORDBUCK_CB,
> + buck_flags, ARRAY_SIZE(buck_flags));
> + if (ret)
> + return IRQ_NONE;
> +
> + ret = regmap_bulk_write(rdev_map->regmap, RTQ2208_REG_GLOBAL_INT1,
> + sts_flags, ARRAY_SIZE(sts_flags));
> + if (ret)
> + return IRQ_NONE;
> +
> + for (i = 0; i < RTQ2208_LDO_MAX; i++) {
> + if (!rdev_map->rdev[i])
> + continue;
> +
> + rdev = rdev_map->rdev[i];
> + /* uv irq */
> + uv_bit = (i & 1) ? 4 : 0;
> + if (buck_flags[i >> 1] & (1 << uv_bit))
> + regulator_notifier_call_chain(rdev,
> + REGULATOR_EVENT_UNDER_VOLTAGE, NULL);
> + /* ov irq */
> + ov_bit = uv_bit + 1;
> + if (buck_flags[i >> 1] & (1 << ov_bit))
> + regulator_notifier_call_chain(rdev,
> + REGULATOR_EVENT_REGULATION_OUT, NULL);
> +
> + /* hd irq */
> + if (sts_flags[1] & RTQ2208_HD_INT_MASK)
> + regulator_notifier_call_chain(rdev,
> + REGULATOR_EVENT_OVER_TEMP, NULL);
> + }
> +
> + return IRQ_HANDLED;
> +}
> +
> +#define RTQ2208_REGULATOR_INFO(_name, _base) \
> +{ \
> + .name = #_name, \
> + .base = _base, \
> +}
> +#define BUCK_RG_BASE(_id) RTQ2208_REG_BUCK_##_id##_CFG0
> +#define BUCK_RG_SHIFT(_base, _shift) (_base + _shift)
> +#define LDO_RG_BASE(_id) RTQ2208_REG_LDO##_id##_CFG
> +#define LDO_RG_SHIFT(_base, _shift) (_base + _shift)
> +#define VSEL_SHIFT(_sel) (_sel ? 3 : 1)
> +#define MTP_SEL_MASK(_sel) RTQ2208_BUCK_EN_NR_MTP_SEL##_sel##_MASK
> +
> +static const struct linear_range rtq2208_vout_range[] = {
> + REGULATOR_LINEAR_RANGE(400000, 0, 180, 5000),
> + REGULATOR_LINEAR_RANGE(1310000, 181, 255, 10000),
> +};
> +
> +static void rtq2208_init_regulator_desc(struct rtq2208_regulator_desc *rdesc, int mtp_sel, int idx)
> +{
> + struct regulator_desc *desc;
> + static const struct {
> + char *name;
> + int base;
> + } regulator_info[] = {
> + RTQ2208_REGULATOR_INFO(buck-b, BUCK_RG_BASE(B)),
> + RTQ2208_REGULATOR_INFO(buck-c, BUCK_RG_BASE(C)),
> + RTQ2208_REGULATOR_INFO(buck-d, BUCK_RG_BASE(D)),
> + RTQ2208_REGULATOR_INFO(buck-a, BUCK_RG_BASE(A)),
> + RTQ2208_REGULATOR_INFO(buck-f, BUCK_RG_BASE(F)),
> + RTQ2208_REGULATOR_INFO(buck-g, BUCK_RG_BASE(G)),
> + RTQ2208_REGULATOR_INFO(buck-h, BUCK_RG_BASE(H)),
> + RTQ2208_REGULATOR_INFO(buck-e, BUCK_RG_BASE(E)),
> + RTQ2208_REGULATOR_INFO(ldo2, LDO_RG_BASE(2)),
> + RTQ2208_REGULATOR_INFO(ldo1, LDO_RG_BASE(1)),
> + }, *curr_info;
> +
> + curr_info = regulator_info + idx;
> + desc = &rdesc->desc;
> + desc->name = curr_info->name;
> + desc->of_match = of_match_ptr(curr_info->name);
> + desc->regulators_node = of_match_ptr("regulators");
> + desc->id = idx;
> + desc->owner = THIS_MODULE;
> + desc->type = REGULATOR_VOLTAGE;
> + desc->enable_mask = mtp_sel ? MTP_SEL_MASK(1) : MTP_SEL_MASK(0);
> + desc->active_discharge_on = RTQ2208_EN_DIS_MASK;
> + desc->active_discharge_off = 0;
> + desc->active_discharge_mask = RTQ2208_EN_DIS_MASK;
> +
> + rdesc->mode_mask = RTQ2208_BUCK_NRMODE_MASK;
> +
> + if (idx >= RTQ2208_BUCK_B && idx <= RTQ2208_BUCK_E) {
> + /* init buck desc */
> + desc->enable_reg = BUCK_RG_SHIFT(curr_info->base, 2);
> + desc->ops = &rtq2208_regulator_buck_ops;
> + desc->vsel_reg = curr_info->base + VSEL_SHIFT(mtp_sel);
> + desc->vsel_mask = RTQ2208_BUCK_NR_MTP_SEL_MASK;
> + desc->n_voltages = RTQ2208_VOUT_MAXNUM;
> + desc->linear_ranges = rtq2208_vout_range;
> + desc->n_linear_ranges = ARRAY_SIZE(rtq2208_vout_range);
> + desc->ramp_reg = BUCK_RG_SHIFT(curr_info->base, 5);
> + desc->active_discharge_reg = curr_info->base;
> + desc->of_map_mode = rtq2208_of_map_mode;
> +
> + rdesc->mode_reg = BUCK_RG_SHIFT(curr_info->base, 2);
> + rdesc->suspend_config_reg = BUCK_RG_SHIFT(curr_info->base, 4);
> + rdesc->suspend_enable_mask = RTQ2208_BUCK_EN_STR_MASK;
> + rdesc->suspend_mode_mask = RTQ2208_BUCK_STRMODE_MASK;
> + } else {
> + /* init ldo desc */
> + desc->enable_reg = curr_info->base;
> + desc->ops = &rtq2208_regulator_ldo_ops;
> + desc->n_voltages = 1;
> + desc->active_discharge_reg = LDO_RG_SHIFT(curr_info->base, 2);
> + desc->of_parse_cb = rtq2208_of_parse_cb;
> +
> + rdesc->suspend_config_reg = curr_info->base;
> + rdesc->suspend_enable_mask = RTQ2208_LDO_EN_STR_MASK;
> + }
> +}
> +
> +/** different slave address corresponds different used bucks
> + * slave address 0x10: BUCK[BCA FGE]
> + * slave address 0x20: BUCK[BC FGHE]
> + * slave address 0x40: BUCK[C G]
> + */
> +static int rtq2208_regulator_check(int slave_addr, int *num, int *regulator_idx_table, unsigned int *buck_masks)
> +{
> + static bool rtq2208_used_table[3][RTQ2208_LDO_MAX] = {
> + /* BUCK[BCA FGE], LDO[12] */
> + {1, 1, 0, 1, 1, 1, 0, 1, 1, 1},
> + /* BUCK[BC FGHE], LDO[12]*/
> + {1, 1, 0, 0, 1, 1, 1, 1, 1, 1},
> + /* BUCK[C G], LDO[12] */
> + {0, 1, 0, 0, 0, 1, 0, 0, 1, 1},
> + };
> + int i, idx = ffs(slave_addr >> 4) - 1;
> + u8 mask;
> +
> + for (i = 0; i < RTQ2208_LDO_MAX; i++) {
> + if (!rtq2208_used_table[idx][i])
> + continue;
> +
> + regulator_idx_table[(*num)++] = i;
> +
> + mask = RTQ2208_BUCK_MASK(4 * i, 4 * i + 1);
> + buck_masks[i >> 1] &= ~mask;
> + }
> +
> + return 0;
> +}
> +
> +static const struct regmap_config rtq2208_regmap_config = {
> + .reg_bits = 8,
> + .val_bits = 8,
> + .max_register = 0xEF,
> +};
> +
> +static int rtq2208_probe(struct i2c_client *i2c)
> +{
> + struct device *dev = &i2c->dev;
> + struct regmap *regmap;
> + struct rtq2208_regulator_desc *rdesc;
> + struct regulator_dev *rdev;
> + struct regulator_config cfg;
> + struct rtq2208_rdev_map *rdev_map;
> + int i, ret = 0, idx, mtp_sel, n_regulator = 0;
> + unsigned int regulator_idx_table[RTQ2208_LDO_MAX],
> + buck_masks[RTQ2208_BUCK_NUM_IRQ_REGS] = {0x33, 0x33, 0x33, 0x33, 0x33};
> +
> + rdev_map = devm_kzalloc(dev, sizeof(struct rtq2208_rdev_map), GFP_KERNEL);
> + if (!rdev_map)
> + return -ENOMEM;
> +
> + /* get mtp_sel0 or mtp_sel1 */
> + mtp_sel = device_property_read_bool(dev, "richtek,mtp-sel-high");
> +
> + regmap = devm_regmap_init_i2c(i2c, &rtq2208_regmap_config);
> + if (IS_ERR(regmap))
> + return dev_err_probe(dev, PTR_ERR(regmap), "Failed to allocate regmap\n");
> +
> + /* get needed regulator */
> + ret = rtq2208_regulator_check(i2c->addr, &n_regulator, regulator_idx_table, buck_masks);
> + if (ret)
> + return dev_err_probe(dev, ret, "Failed to check used regulators\n");
> +
> + rdev_map->regmap = regmap;
> + rdev_map->dev = dev;
> +
> + cfg.dev = dev;
> +
> + for (i = 0; i < n_regulator; i++) {
> + idx = regulator_idx_table[i];
> +
> + rdesc = devm_kcalloc(dev, 1, sizeof(struct rtq2208_regulator_desc), GFP_KERNEL);
It's the same as devm_kzalloc(dev, sizeof(*rdesc), GFP_KERNEL). More simple?
> + if (!rdesc)
> + return -ENOMEM;
> +
> + /* init regulator desc */
> + rtq2208_init_regulator_desc(rdesc, mtp_sel, idx);
> +
> + /* regiser regulator */
> + rdev = devm_regulator_register(dev, &rdesc->desc, &cfg);
> + if (IS_ERR(rdev))
> + return PTR_ERR(rdev);
> +
> + rdev_map->rdev[idx] = rdev;
> + }
> +
> + /* init interrupt mask */
> + ret = rtq2208_init_irq_mask(rdev_map, buck_masks);
> + if (ret)
> + return ret;
> +
> + /* register interrupt */
> + ret = devm_request_threaded_irq(dev, i2c->irq, NULL, rtq2208_irq_handler,
> + IRQF_ONESHOT, dev_name(dev), rdev_map);
> +
> + return ret;
Why not directly write this as 'return devm_request_threaded_irq .......?
> +}
> +
> +static const struct of_device_id __maybe_unused rtq2208_device_tables[] = {
Remove __maybe_unused. it cannot be unsed.
The below 'of_match_table' will always need it.
> + { .compatible = "richtek,rtq2208", },
~~~
this comma can be removed.
> + {}
> +};
> +MODULE_DEVICE_TABLE(of, rtq2208_device_tables);
> +
> +static struct i2c_driver rtq2208_driver = {
> + .driver = {
> + .name = "rtq2208",
> + .of_match_table = rtq2208_device_tables,
> + },
> + .probe_new = rtq2208_probe,
> +};
> +module_i2c_driver(rtq2208_driver);
> +
> +MODULE_AUTHOR("Alina Yu <[email protected]>");
> +MODULE_DESCRIPTION("Richtek RTQ2208 Regulator Driver");
> +MODULE_LICENSE("GPL v2");
'GPL' only is fine. In SPDX license, you already said it 'GPL v2+'.
> --
> 2.7.4
>
On Thu, Aug 03, 2023 at 03:24:25PM +0800, ChiYuan Huang wrote:
> On Wed, Jul 26, 2023 at 03:13:12PM +0800, Alina Yu wrote:
> > Signed-off-by: Alina Yu <[email protected]>
> > Reported-by: kernel test robot <[email protected]>
> This patch series is to add new drivers, not fix.
> Why do you add the Reported-by tag?
The LKP people have some boilerplate in their reports that tells people
to add Reported-bys for things they find based on patches, it's a
constant problem :(
Hi
Mark,
On Thu, Aug 03, 2023 at 12:08:28PM +0100, Mark Brown wrote:
> On Thu, Aug 03, 2023 at 03:24:25PM +0800, ChiYuan Huang wrote:
> > On Wed, Jul 26, 2023 at 03:13:12PM +0800, Alina Yu wrote:
>
> > > Signed-off-by: Alina Yu <[email protected]>
> > > Reported-by: kernel test robot <[email protected]>
> > This patch series is to add new drivers, not fix.
> > Why do you add the Reported-by tag?
>
> The LKP people have some boilerplate in their reports that tells people
> to add Reported-bys for things they find based on patches, it's a
> constant problem :(
Sorry, I misunerstood the meaning of Reported-by
I've removed that since v6.
Thanks, Alina