From: Louis Kuo <[email protected]>
This adds the bindings, for the mediatek ISP3.0 SENINF module embedded in
some Mediatek SoC, such as the mt8365
Signed-off-by: Louis Kuo <[email protected]>
Signed-off-by: Phi-Bang Nguyen <[email protected]>
Signed-off-by: Laurent Pinchart <[email protected]>
Signed-off-by: Julien Stephan <[email protected]>
---
.../media/mediatek,mt8365-seninf.yaml | 259 ++++++++++++++++++
MAINTAINERS | 7 +
2 files changed, 266 insertions(+)
create mode 100644 Documentation/devicetree/bindings/media/mediatek,mt8365-seninf.yaml
diff --git a/Documentation/devicetree/bindings/media/mediatek,mt8365-seninf.yaml b/Documentation/devicetree/bindings/media/mediatek,mt8365-seninf.yaml
new file mode 100644
index 000000000000..0a7b7d949df7
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/mediatek,mt8365-seninf.yaml
@@ -0,0 +1,259 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (c) 2023 MediaTek, BayLibre
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/mediatek,mt8365-seninf.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek Sensor Interface 3.0
+
+maintainers:
+ - Laurent Pinchart <[email protected]>
+ - Julien Stephan <[email protected]>
+ - Andy Hsieh <[email protected]>
+
+description:
+ The ISP3.0 SENINF is the CSI-2 and parallel camera sensor interface found in
+ multiple MediaTek SoCs. It can support up to three physical CSI-2
+ input ports, configured in DPHY (2 or 4 data lanes) or CPHY depending on the soc.
+ On the output side, SENINF can be connected either to CAMSV instance or
+ to the internal ISP. CAMSV is used to bypass the internal ISP processing
+ in order to connect either an external ISP, or a sensor (RAW, YUV).
+
+properties:
+ compatible:
+ const: mediatek,mt8365-seninf
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ power-domains:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: Seninf camsys clock
+ - description: Seninf top mux clock
+
+ clock-names:
+ items:
+ - const: camsys
+ - const: top_mux
+
+ phys:
+ minItems: 1
+ maxItems: 4
+ description:
+ phandle to the PHYs connected to CSI0/A, CSI1, CSI2 and CSI0B
+
+ phy-names:
+ minItems: 1
+ items:
+ - const: csi0
+ - const: csi1
+ - const: csi2
+ - const: csi0b
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
+ description: CSI0 or CSI0A port
+
+ properties:
+ endpoint:
+ $ref: video-interfaces.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ clock-lanes:
+ maxItems: 1
+ data-lanes:
+ minItems: 1
+ maxItems: 4
+
+ port@1:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
+ description: CSI1 port
+
+ properties:
+ endpoint:
+ $ref: video-interfaces.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ clock-lanes:
+ maxItems: 1
+ data-lanes:
+ minItems: 1
+ maxItems: 4
+
+ port@2:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
+ description: CSI2 port
+
+ properties:
+ endpoint:
+ $ref: video-interfaces.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ clock-lanes:
+ maxItems: 1
+ data-lanes:
+ minItems: 1
+ maxItems: 4
+
+ port@3:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
+ description: CSI0B port
+
+ properties:
+ endpoint:
+ $ref: video-interfaces.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ clock-lanes:
+ maxItems: 1
+ data-lanes:
+ minItems: 1
+ maxItems: 2
+
+ port@4:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: connection point for cam0
+
+ port@5:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: connection point for cam1
+
+ port@6:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: connection point for camsv0
+
+ port@7:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: connection point for camsv1
+
+ port@8:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: connection point for camsv2
+
+ port@9:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: connection point for camsv3
+
+ required:
+ - port@0
+ - port@1
+ - port@2
+ - port@3
+ - port@4
+ - port@5
+ - port@6
+ - port@7
+ - port@8
+ - port@9
+
+required:
+ - compatible
+ - interrupts
+ - clocks
+ - clock-names
+ - power-domains
+ - ports
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/mediatek,mt8365-clk.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/phy/phy.h>
+ #include <dt-bindings/power/mediatek,mt8365-power.h>
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ seninf: seninf@15040000 {
+ compatible = "mediatek,mt8365-seninf";
+ reg = <0 0x15040000 0 0x6000>;
+ interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&camsys CLK_CAM_SENIF>,
+ <&topckgen CLK_TOP_SENIF_SEL>;
+ clock-names = "camsys", "top_mux";
+
+ power-domains = <&spm MT8365_POWER_DOMAIN_CAM>;
+
+ phys = <&mipi_csi0 PHY_TYPE_DPHY>;
+ phy-names = "csi0";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ seninf_in1: endpoint {
+ clock-lanes = <2>;
+ data-lanes = <1 3 0 4>;
+ remote-endpoint = <&isp1_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ };
+
+ port@2 {
+ reg = <2>;
+ };
+
+ port@3 {
+ reg = <3>;
+ };
+
+ port@4 {
+ reg = <4>;
+ seninf_camsv1_endpoint: endpoint {
+ remote-endpoint = <&camsv1_endpoint>;
+ };
+ };
+
+ port@5 {
+ reg = <5>;
+ };
+
+ port@6 {
+ reg = <6>;
+ };
+
+ port@7 {
+ reg = <7>;
+ };
+
+ port@8 {
+ reg = <8>;
+ };
+
+ port@9 {
+ reg = <9>;
+ };
+
+ };
+ };
+ };
+
+...
diff --git a/MAINTAINERS b/MAINTAINERS
index f14c1807067e..2997ec387cc0 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -13359,6 +13359,13 @@ M: Sean Wang <[email protected]>
S: Maintained
F: drivers/char/hw_random/mtk-rng.c
+MEDIATEK ISP3.0 DRIVER
+M: Laurent Pinchart <[email protected]>
+M: Julien Stephan <[email protected]>
+M: Andy Hsieh <[email protected]>
+S: Supported
+F: Documentation/devicetree/bindings/media/mediatek,mt8365-seninf.yaml
+
MEDIATEK SMI DRIVER
M: Yong Wu <[email protected]>
L: [email protected] (moderated for non-subscribers)
--
2.41.0
On Mon, 07 Aug 2023 11:48:10 +0200, Julien Stephan wrote:
> From: Louis Kuo <[email protected]>
>
> This adds the bindings, for the mediatek ISP3.0 SENINF module embedded in
> some Mediatek SoC, such as the mt8365
>
> Signed-off-by: Louis Kuo <[email protected]>
> Signed-off-by: Phi-Bang Nguyen <[email protected]>
> Signed-off-by: Laurent Pinchart <[email protected]>
> Signed-off-by: Julien Stephan <[email protected]>
> ---
> .../media/mediatek,mt8365-seninf.yaml | 259 ++++++++++++++++++
> MAINTAINERS | 7 +
> 2 files changed, 266 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/media/mediatek,mt8365-seninf.yaml
>
My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):
yamllint warnings/errors:
dtschema/dtc warnings/errors:
Documentation/devicetree/bindings/media/mediatek,mt8365-seninf.example.dts:28:18: fatal error: dt-bindings/power/mediatek,mt8365-power.h: No such file or directory
28 | #include <dt-bindings/power/mediatek,mt8365-power.h>
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
compilation terminated.
make[2]: *** [scripts/Makefile.lib:419: Documentation/devicetree/bindings/media/mediatek,mt8365-seninf.example.dtb] Error 1
make[2]: *** Waiting for unfinished jobs....
make[1]: *** [/builds/robherring/dt-review-ci/linux/Makefile:1500: dt_binding_check] Error 2
make: *** [Makefile:234: __sub-make] Error 2
doc reference errors (make refcheckdocs):
See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/[email protected]
The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.
If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:
pip3 install dtschema --upgrade
Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.