by Laurent Pinchart

[permalink] [raw]

Subject: Re: [PATCH v2 3/3] media: i2c: imx219: Add support for cropped 640x480 resolution

On Fri, Mar 06, 2020 at 05:02:30PM +0000, Dave Stevenson wrote:
> On Fri, 6 Mar 2020 at 14:59, Lad, Prabhakar wrote:
> > On Fri, Mar 6, 2020 at 2:47 PM Dave Stevenson wrote:
> > > On Fri, 6 Mar 2020 at 10:33, Lad Prabhakar wrote:
> > > >
> > > > This patch adds mode table entry for capturing cropped 640x480 resolution
> > > >
> > > > Signed-off-by: Lad Prabhakar <[email protected]>
> > > > ---
> > > > drivers/media/i2c/imx219.c | 72 ++++++++++++++++++++++++++++++++++++--
> > > > 1 file changed, 70 insertions(+), 2 deletions(-)
> > > >
> > > > diff --git a/drivers/media/i2c/imx219.c b/drivers/media/i2c/imx219.c
> > > > index f96f3ce9fd85..6a86f500ec48 100644
> > > > --- a/drivers/media/i2c/imx219.c
> > > > +++ b/drivers/media/i2c/imx219.c
> > > > @@ -54,6 +54,7 @@
> > > > #define IMX219_VTS_15FPS 0x0dc6
> > > > #define IMX219_VTS_30FPS_1080P 0x06e3
> > > > #define IMX219_VTS_30FPS_BINNED 0x06e3
> > > > +#define IMX219_VTS_30FPS_640x480 0x06e3
> > >
> > > Thanks on updating this - I can confirm the default is now 30fps
> > > rather than the 90 I was seeing before.
> > > Reducing vertical blanking down to the minimum 4 lines give me
> > > 109.3fps and all still working properly :-)
> >
> > thank you for testing.
> >
> > > > #define IMX219_VTS_MAX 0xffff
> > > >
> > > > #define IMX219_VBLANK_MIN 4
> > > > @@ -142,8 +143,8 @@ struct imx219_mode {
> > > >
> > > > /*
> > > > * Register sets lifted off the i2C interface from the Raspberry Pi firmware
> > > > - * driver.
> > > > - * 3280x2464 = mode 2, 1920x1080 = mode 1, and 1640x1232 = mode 4.
> > > > + * driver for resolutions 3280x2464, 1920x1080 and 1640x1232.
> > > > + * 3280x2464 = mode 2, 1920x1080 = mode 1, 1640x1232 = mode 4, 640x480 = mode 1.
> > >
> > > 640x480 has come from mode 1 of the firmware? mode 1 is the 1080p mode.
> >
> > my bad, my context of mode was cropped/binned.
> >
> > > Having checked through the register settings they are identical to
> > > those used by the Pi firmware for mode 7, see [1]. You could quote
> > > that rather than stating that they were derived by yourself.
> > >
> > > One of Sony's concerns when I discussed upstreaming this driver with
> > > them was that people might add modes with random register settings. If
> > > the image quality was then sub-standard they'd unjustly look bad. They
> > > validated and blessed the register sets that we were using in the Pi
> > > firmware, so retaining that parentage will make them happy.
> > >
> > > [1] https://github.com/6by9/raspiraw/blob/master/imx219_modes.h#L506
> > >
> > To be honest the driver which was in-house didn't have any references
> > for the register settings,
> > I'll instead add the reference to which you pointed and set as mode = 7.
>
> Code of unknown origin being passed around is always fun!
>
> I hadn't referenced my raspiraw repo as the source as it's not an
> officially released app, and Github repos have a tendency to move or
> get deleted over time. The original comment that it was as per the
> Raspberry Pi firmware (of which raspiraw is an I2C dump of the
> transactions, but anyone else could attach an analyser for themselves)
> seemed sufficient to me. Up to you though.
>
> FYI The complete list of modes we have register sets for are
> - mode 1 = 1920x1080 cropped
> - mode 2 = 3280x2464 full FOV
> - mode 3 = same as mode 2 for legacy reasons.
> - mode 4 = 1640x1232 2x2 binned
> - mode 5 = 1640x922 2x2 binned and centre cropped to 16:9
> - mode 6 = 1280x720 2x2 binned in the fast binning mode, and centre
> cropped. For higher framerate capture (up to 120fps)
> - mode 7 = 640x480 2x2 binned in the fast binning mode, and centre
> cropped. For higher framerate capture (up to 200fps). I'd need to
> investigate why your copy of this register set only gets up to 109fps.
> Quite possibly line_length being reduced.
>
> > If you are Okay Ill just resend this patch as rest have been acked.
>
> Fine by me if others are happy with the rest of the patches.
>
> > > > */
> > > > static const struct imx219_reg mode_3280x2464_regs[] = {
> > > > {0x0100, 0x00},
> > > > @@ -318,6 +319,63 @@ static const struct imx219_reg mode_1640_1232_regs[] = {
> > > > {0x0163, 0x78},
> > > > };
> > > >
> > > > +static const struct imx219_reg mode_640_480_regs[] = {
> > > > + {0x0100, 0x00},
> > > > + {0x30eb, 0x05},
> > > > + {0x30eb, 0x0c},
> > > > + {0x300a, 0xff},
> > > > + {0x300b, 0xff},
> > > > + {0x30eb, 0x05},
> > > > + {0x30eb, 0x09},
> > > > + {0x0114, 0x01},
> > > > + {0x0128, 0x00},
> > > > + {0x012a, 0x18},
> > > > + {0x012b, 0x00},
> > > > + {0x0162, 0x0d},
> > > > + {0x0163, 0x78},
> > > > + {0x0164, 0x03},
> > > > + {0x0165, 0xe8},
> > > > + {0x0166, 0x08},
> > > > + {0x0167, 0xe7},
> > > > + {0x0168, 0x02},
> > > > + {0x0169, 0xf0},
> > > > + {0x016a, 0x06},
> > > > + {0x016b, 0xaf},
> > > > + {0x016c, 0x02},
> > > > + {0x016d, 0x80},
> > > > + {0x016e, 0x01},
> > > > + {0x016f, 0xe0},
> > > > + {0x0170, 0x01},
> > > > + {0x0171, 0x01},
> > > > + {0x0174, 0x03},
> > > > + {0x0175, 0x03},
> > > > + {0x0301, 0x05},
> > > > + {0x0303, 0x01},
> > > > + {0x0304, 0x03},
> > > > + {0x0305, 0x03},
> > > > + {0x0306, 0x00},
> > > > + {0x0307, 0x39},
> > > > + {0x030b, 0x01},
> > > > + {0x030c, 0x00},
> > > > + {0x030d, 0x72},
> > > > + {0x0624, 0x06},
> > > > + {0x0625, 0x68},
> > > > + {0x0626, 0x04},
> > > > + {0x0627, 0xd0},

I'm wondering where these four values come from. They set the
TP_WINDOW_WIDTH and TP_WINDOW_HEIGHT registers to 1640 and 1232
respectively, which seems to have been copied from the 1640x1232 mode.
Are they right for the 640x480 mode ? All the other modes set those two
registers to the same values as X_OUTPUT_SIZE and Y_OUTPUT_SIZE.

> > > > + {0x455e, 0x00},
> > > > + {0x471e, 0x4b},
> > > > + {0x4767, 0x0f},
> > > > + {0x4750, 0x14},
> > > > + {0x4540, 0x00},
> > > > + {0x47b4, 0x14},
> > > > + {0x4713, 0x30},
> > > > + {0x478b, 0x10},
> > > > + {0x478f, 0x10},
> > > > + {0x4793, 0x10},
> > > > + {0x4797, 0x0e},
> > > > + {0x479b, 0x0e},
> > > > +};
> > > > +
> > > > static const char * const imx219_test_pattern_menu[] = {
> > > > "Disabled",
> > > > "Color Bars",
> > > > @@ -424,6 +482,16 @@ static const struct imx219_mode supported_modes[] = {
> > > > .regs = mode_1640_1232_regs,
> > > > },
> > > > },
> > > > + {
> > > > + /* 640x480 30fps mode */
> > > > + .width = 640,
> > > > + .height = 480,
> > > > + .vts_def = IMX219_VTS_30FPS_640x480,
> > > > + .reg_list = {
> > > > + .num_of_regs = ARRAY_SIZE(mode_640_480_regs),
> > > > + .regs = mode_640_480_regs,
> > > > + },
> > > > + },
> > > > };
> > > >
> > > > struct imx219 {

--
Regards,

Laurent Pinchart