From: Clément Léger <[email protected]>
Add support for vlan operation (add, del, filtering) on the RZN1
driver. The a5psw switch supports up to 32 VLAN IDs with filtering,
tagged/untagged VLANs and PVID for each ports.
Signed-off-by: Clément Léger <[email protected]>
Signed-off-by: Alexis Lothoré <[email protected]>
---
Changes since v4:
- ensure vlan port tagging is enabled/disabled only when enabling/disabling
vlan-aware bridges (by configuring it in a5psw_port_vlan_filtering
instead of a5psw_port_vlan_<add/del>)
---
drivers/net/dsa/rzn1_a5psw.c | 166 +++++++++++++++++++++++++++++++++++
drivers/net/dsa/rzn1_a5psw.h | 8 +-
2 files changed, 171 insertions(+), 3 deletions(-)
diff --git a/drivers/net/dsa/rzn1_a5psw.c b/drivers/net/dsa/rzn1_a5psw.c
index e4a93dad1d58..2bb458f2c1f8 100644
--- a/drivers/net/dsa/rzn1_a5psw.c
+++ b/drivers/net/dsa/rzn1_a5psw.c
@@ -639,6 +639,146 @@ static int a5psw_port_fdb_dump(struct dsa_switch *ds, int port,
return ret;
}
+static int a5psw_port_vlan_filtering(struct dsa_switch *ds, int port,
+ bool vlan_filtering,
+ struct netlink_ext_ack *extack)
+{
+ u32 mask = BIT(port + A5PSW_VLAN_VERI_SHIFT) |
+ BIT(port + A5PSW_VLAN_DISC_SHIFT);
+ u32 val = vlan_filtering ? mask : 0;
+ struct a5psw *a5psw = ds->priv;
+
+ /* Disable/enable vlan tagging */
+ a5psw_reg_rmw(a5psw, A5PSW_VLAN_IN_MODE_ENA, BIT(port),
+ vlan_filtering ? BIT(port) : 0);
+
+ /* Disable/enable vlan input filtering */
+ a5psw_reg_rmw(a5psw, A5PSW_VLAN_VERIFY, mask, val);
+
+ return 0;
+}
+
+static int a5psw_find_vlan_entry(struct a5psw *a5psw, u16 vid)
+{
+ u32 vlan_res;
+ int i;
+
+ /* Find vlan for this port */
+ for (i = 0; i < A5PSW_VLAN_COUNT; i++) {
+ vlan_res = a5psw_reg_readl(a5psw, A5PSW_VLAN_RES(i));
+ if (FIELD_GET(A5PSW_VLAN_RES_VLANID, vlan_res) == vid)
+ return i;
+ }
+
+ return -1;
+}
+
+static int a5psw_new_vlan_res_entry(struct a5psw *a5psw, u16 newvid)
+{
+ u32 vlan_res;
+ int i;
+
+ /* Find a free VLAN entry */
+ for (i = 0; i < A5PSW_VLAN_COUNT; i++) {
+ vlan_res = a5psw_reg_readl(a5psw, A5PSW_VLAN_RES(i));
+ if (!(FIELD_GET(A5PSW_VLAN_RES_PORTMASK, vlan_res))) {
+ vlan_res = FIELD_PREP(A5PSW_VLAN_RES_VLANID, newvid);
+ a5psw_reg_writel(a5psw, A5PSW_VLAN_RES(i), vlan_res);
+ return i;
+ }
+ }
+
+ return -1;
+}
+
+static void a5psw_port_vlan_tagged_cfg(struct a5psw *a5psw,
+ unsigned int vlan_res_id, int port,
+ bool set)
+{
+ u32 mask = A5PSW_VLAN_RES_WR_PORTMASK | A5PSW_VLAN_RES_RD_TAGMASK |
+ BIT(port);
+ u32 vlan_res_off = A5PSW_VLAN_RES(vlan_res_id);
+ u32 val = A5PSW_VLAN_RES_WR_TAGMASK, reg;
+
+ if (set)
+ val |= BIT(port);
+
+ /* Toggle tag mask read */
+ a5psw_reg_writel(a5psw, vlan_res_off, A5PSW_VLAN_RES_RD_TAGMASK);
+ reg = a5psw_reg_readl(a5psw, vlan_res_off);
+ a5psw_reg_writel(a5psw, vlan_res_off, A5PSW_VLAN_RES_RD_TAGMASK);
+
+ reg &= ~mask;
+ reg |= val;
+ a5psw_reg_writel(a5psw, vlan_res_off, reg);
+}
+
+static void a5psw_port_vlan_cfg(struct a5psw *a5psw, unsigned int vlan_res_id,
+ int port, bool set)
+{
+ u32 mask = A5PSW_VLAN_RES_WR_TAGMASK | BIT(port);
+ u32 reg = A5PSW_VLAN_RES_WR_PORTMASK;
+
+ if (set)
+ reg |= BIT(port);
+
+ a5psw_reg_rmw(a5psw, A5PSW_VLAN_RES(vlan_res_id), mask, reg);
+}
+
+static int a5psw_port_vlan_add(struct dsa_switch *ds, int port,
+ const struct switchdev_obj_port_vlan *vlan,
+ struct netlink_ext_ack *extack)
+{
+ bool tagged = !(vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED);
+ bool pvid = vlan->flags & BRIDGE_VLAN_INFO_PVID;
+ struct a5psw *a5psw = ds->priv;
+ u16 vid = vlan->vid;
+ int vlan_res_id;
+
+ dev_dbg(a5psw->dev, "Add VLAN %d on port %d, %s, %s\n",
+ vid, port, tagged ? "tagged" : "untagged",
+ pvid ? "PVID" : "no PVID");
+
+ vlan_res_id = a5psw_find_vlan_entry(a5psw, vid);
+ if (vlan_res_id < 0) {
+ vlan_res_id = a5psw_new_vlan_res_entry(a5psw, vid);
+ if (vlan_res_id < 0)
+ return -ENOSPC;
+ }
+
+ a5psw_port_vlan_cfg(a5psw, vlan_res_id, port, true);
+ if (tagged)
+ a5psw_port_vlan_tagged_cfg(a5psw, vlan_res_id, port, true);
+
+ /* Configure port to tag with corresponding VID, but do not enable it
+ * yet: wait for vlan filtering to be enabled to enable vlan port
+ * tagging
+ */
+ if (pvid)
+ a5psw_reg_writel(a5psw, A5PSW_SYSTEM_TAGINFO(port), vid);
+
+ return 0;
+}
+
+static int a5psw_port_vlan_del(struct dsa_switch *ds, int port,
+ const struct switchdev_obj_port_vlan *vlan)
+{
+ struct a5psw *a5psw = ds->priv;
+ u16 vid = vlan->vid;
+ int vlan_res_id;
+
+ dev_dbg(a5psw->dev, "Removing VLAN %d on port %d\n", vid, port);
+
+ vlan_res_id = a5psw_find_vlan_entry(a5psw, vid);
+ if (vlan_res_id < 0)
+ return -EINVAL;
+
+ a5psw_port_vlan_cfg(a5psw, vlan_res_id, port, false);
+ a5psw_port_vlan_tagged_cfg(a5psw, vlan_res_id, port, false);
+
+ return 0;
+}
+
static u64 a5psw_read_stat(struct a5psw *a5psw, u32 offset, int port)
{
u32 reg_lo, reg_hi;
@@ -756,6 +896,27 @@ static void a5psw_get_eth_ctrl_stats(struct dsa_switch *ds, int port,
ctrl_stats->MACControlFramesReceived = stat;
}
+static void a5psw_vlan_setup(struct a5psw *a5psw, int port)
+{
+ u32 reg;
+
+ /* Enable TAG always mode for the port, this is actually controlled
+ * by VLAN_IN_MODE_ENA field which will be used for PVID insertion
+ */
+ reg = A5PSW_VLAN_IN_MODE_TAG_ALWAYS;
+ reg <<= A5PSW_VLAN_IN_MODE_PORT_SHIFT(port);
+ a5psw_reg_rmw(a5psw, A5PSW_VLAN_IN_MODE, A5PSW_VLAN_IN_MODE_PORT(port),
+ reg);
+
+ /* Set transparent mode for output frame manipulation, this will depend
+ * on the VLAN_RES configuration mode
+ */
+ reg = A5PSW_VLAN_OUT_MODE_TRANSPARENT;
+ reg <<= A5PSW_VLAN_OUT_MODE_PORT_SHIFT(port);
+ a5psw_reg_rmw(a5psw, A5PSW_VLAN_OUT_MODE,
+ A5PSW_VLAN_OUT_MODE_PORT(port), reg);
+}
+
static int a5psw_setup(struct dsa_switch *ds)
{
struct a5psw *a5psw = ds->priv;
@@ -830,6 +991,8 @@ static int a5psw_setup(struct dsa_switch *ds)
/* Enable standalone mode for user ports */
if (dsa_port_is_user(dp))
a5psw_port_set_standalone(a5psw, port, true);
+
+ a5psw_vlan_setup(a5psw, port);
}
return 0;
@@ -859,6 +1022,9 @@ static const struct dsa_switch_ops a5psw_switch_ops = {
.port_bridge_flags = a5psw_port_bridge_flags,
.port_stp_state_set = a5psw_port_stp_state_set,
.port_fast_age = a5psw_port_fast_age,
+ .port_vlan_filtering = a5psw_port_vlan_filtering,
+ .port_vlan_add = a5psw_port_vlan_add,
+ .port_vlan_del = a5psw_port_vlan_del,
.port_fdb_add = a5psw_port_fdb_add,
.port_fdb_del = a5psw_port_fdb_del,
.port_fdb_dump = a5psw_port_fdb_dump,
diff --git a/drivers/net/dsa/rzn1_a5psw.h b/drivers/net/dsa/rzn1_a5psw.h
index b869192eef3f..d54acedac194 100644
--- a/drivers/net/dsa/rzn1_a5psw.h
+++ b/drivers/net/dsa/rzn1_a5psw.h
@@ -51,7 +51,9 @@
#define A5PSW_VLAN_IN_MODE_TAG_ALWAYS 0x2
#define A5PSW_VLAN_OUT_MODE 0x2C
-#define A5PSW_VLAN_OUT_MODE_PORT(port) (GENMASK(1, 0) << ((port) * 2))
+#define A5PSW_VLAN_OUT_MODE_PORT_SHIFT(port) ((port) * 2)
+#define A5PSW_VLAN_OUT_MODE_PORT(port) (GENMASK(1, 0) << \
+ A5PSW_VLAN_OUT_MODE_PORT_SHIFT(port))
#define A5PSW_VLAN_OUT_MODE_DIS 0x0
#define A5PSW_VLAN_OUT_MODE_STRIP 0x1
#define A5PSW_VLAN_OUT_MODE_TAG_THROUGH 0x2
@@ -60,7 +62,7 @@
#define A5PSW_VLAN_IN_MODE_ENA 0x30
#define A5PSW_VLAN_TAG_ID 0x34
-#define A5PSW_SYSTEM_TAGINFO(port) (0x200 + A5PSW_PORT_OFFSET(port))
+#define A5PSW_SYSTEM_TAGINFO(port) (0x200 + 4 * (port))
#define A5PSW_AUTH_PORT(port) (0x240 + 4 * (port))
#define A5PSW_AUTH_PORT_AUTHORIZED BIT(0)
@@ -69,7 +71,7 @@
#define A5PSW_VLAN_RES_WR_PORTMASK BIT(30)
#define A5PSW_VLAN_RES_WR_TAGMASK BIT(29)
#define A5PSW_VLAN_RES_RD_TAGMASK BIT(28)
-#define A5PSW_VLAN_RES_ID GENMASK(16, 5)
+#define A5PSW_VLAN_RES_VLANID GENMASK(16, 5)
#define A5PSW_VLAN_RES_PORTMASK GENMASK(4, 0)
#define A5PSW_RXMATCH_CONFIG(port) (0x3e80 + 4 * (port))
--
2.41.0
On Thu, Aug 10, 2023 at 11:36:51AM +0200, [email protected] wrote:
> +static int a5psw_port_vlan_add(struct dsa_switch *ds, int port,
> + const struct switchdev_obj_port_vlan *vlan,
> + struct netlink_ext_ack *extack)
> +{
> + dev_dbg(a5psw->dev, "Add VLAN %d on port %d, %s, %s\n",
> + vid, port, tagged ? "tagged" : "untagged",
> + pvid ? "PVID" : "no PVID");
> +}
> +
> +static int a5psw_port_vlan_del(struct dsa_switch *ds, int port,
> + const struct switchdev_obj_port_vlan *vlan)
> +{
> + dev_dbg(a5psw->dev, "Removing VLAN %d on port %d\n", vid, port);
> +}
These are unnecessary, we have trace points for VLANs in net/dsa/trace.h.