Add an optional timeout arg to 'rootwait' as the maximum time in
seconds to wait for the root device to show up before attempting
forced mount of the root filesystem.
Use case:
In case of device mapper usage for the rootfs (e.g. root=/dev/dm-0),
if the mapper is not able to create the virtual block for any reason
(wrong arguments, bad dm-verity signature, etc), the `rootwait` param
causes the kernel to wait forever. It may however be desirable to only
wait for a given time and then panic (force mount) to cause device reset.
This gives the bootloader a chance to detect the problem and to take some
measures, such as marking the booted partition as bad (for A/B case) or
entering a recovery mode.
In success case, mounting happens as soon as the root device is ready,
unlike the existing 'rootdelay' parameter which performs an unconditional
pause.
Signed-off-by: Loic Poulain <[email protected]>
---
v2: rebase + reword: add use case example
v3: Use kstrtoint instead of deprecated simple_strtoul
v4: Handle mult overflow when converting sec to ms
Initialize end ktime after ROOT_DEV check
.../admin-guide/kernel-parameters.txt | 4 ++
init/do_mounts.c | 38 ++++++++++++++++++-
2 files changed, 40 insertions(+), 2 deletions(-)
diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index a1457995fd41..387cf9c2a2c5 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -5501,6 +5501,10 @@
Useful for devices that are detected asynchronously
(e.g. USB and MMC devices).
+ rootwait= [KNL] Maximum time (in seconds) to wait for root device
+ to show up before attempting to mount the root
+ filesystem.
+
rproc_mem=nn[KMG][@address]
[KNL,ARM,CMA] Remoteproc physical memory block.
Memory area to be used by remote processor image,
diff --git a/init/do_mounts.c b/init/do_mounts.c
index 1aa015883519..5dfd30b13f48 100644
--- a/init/do_mounts.c
+++ b/init/do_mounts.c
@@ -18,6 +18,7 @@
#include <linux/slab.h>
#include <linux/ramfs.h>
#include <linux/shmem_fs.h>
+#include <linux/ktime.h>
#include <linux/nfs_fs.h>
#include <linux/nfs_fs_sb.h>
@@ -71,12 +72,37 @@ static int __init rootwait_setup(char *str)
{
if (*str)
return 0;
- root_wait = 1;
+ root_wait = -1;
return 1;
}
__setup("rootwait", rootwait_setup);
+static int __init rootwait_timeout_setup(char *str)
+{
+ int sec;
+
+ if (kstrtoint(str, 0, &sec) || sec < 0) {
+ pr_warn("ignoring invalid rootwait value\n");
+ goto ignore;
+ }
+
+ if (check_mul_overflow(sec, MSEC_PER_SEC, &root_wait)) {
+ pr_warn("ignoring excessive rootwait value\n");
+ goto ignore;
+ }
+
+ return 1;
+
+ignore:
+ /* Fallback to indefinite wait */
+ root_wait = -1;
+
+ return 1;
+}
+
+__setup("rootwait=", rootwait_timeout_setup);
+
static char * __initdata root_mount_data;
static int __init root_data_setup(char *str)
{
@@ -384,14 +410,22 @@ void __init mount_root(char *root_device_name)
/* wait for any asynchronous scanning to complete */
static void __init wait_for_root(char *root_device_name)
{
+ ktime_t end;
+
if (ROOT_DEV != 0)
return;
pr_info("Waiting for root device %s...\n", root_device_name);
+ end = ktime_add_ms(ktime_get_raw(), root_wait);
+
while (!driver_probe_done() ||
- early_lookup_bdev(root_device_name, &ROOT_DEV) < 0)
+ early_lookup_bdev(root_device_name, &ROOT_DEV) < 0) {
msleep(5);
+ if (root_wait > 0 && ktime_after(ktime_get_raw(), end))
+ break;
+ }
+
async_synchronize_full();
}
--
2.34.1
On Sun, Aug 13, 2023 at 10:23:49AM +0200, Loic Poulain wrote:
> Add an optional timeout arg to 'rootwait' as the maximum time in
> seconds to wait for the root device to show up before attempting
> forced mount of the root filesystem.
>
> Use case:
> In case of device mapper usage for the rootfs (e.g. root=/dev/dm-0),
> if the mapper is not able to create the virtual block for any reason
> (wrong arguments, bad dm-verity signature, etc), the `rootwait` param
> causes the kernel to wait forever. It may however be desirable to only
> wait for a given time and then panic (force mount) to cause device reset.
> This gives the bootloader a chance to detect the problem and to take some
> measures, such as marking the booted partition as bad (for A/B case) or
> entering a recovery mode.
>
> In success case, mounting happens as soon as the root device is ready,
> unlike the existing 'rootdelay' parameter which performs an unconditional
> pause.
>
> Signed-off-by: Loic Poulain <[email protected]>
> ---
Looks mostly fine to me now but that's v6.7 fodder as it's rather late
in the cycle. I'll earmark this but feel free to resend post merge
window closure.
On Sun, 13 Aug 2023 10:23:49 +0200, Loic Poulain wrote:
> Add an optional timeout arg to 'rootwait' as the maximum time in
> seconds to wait for the root device to show up before attempting
> forced mount of the root filesystem.
>
> Use case:
> In case of device mapper usage for the rootfs (e.g. root=/dev/dm-0),
> if the mapper is not able to create the virtual block for any reason
> (wrong arguments, bad dm-verity signature, etc), the `rootwait` param
> causes the kernel to wait forever. It may however be desirable to only
> wait for a given time and then panic (force mount) to cause device reset.
> This gives the bootloader a chance to detect the problem and to take some
> measures, such as marking the booted partition as bad (for A/B case) or
> entering a recovery mode.
>
> [...]
Hmkay, let's give this some -next exposure.
---
Applied to the vfs.misc branch of the vfs/vfs.git tree.
Patches in the vfs.misc branch should appear in linux-next soon.
Please report any outstanding bugs that were missed during review in a
new review to the original patch series allowing us to drop it.
It's encouraged to provide Acked-bys and Reviewed-bys even though the
patch has now been applied. If possible patch trailers will be updated.
Note that commit hashes shown below are subject to change due to rebase,
trailer updates or similar. If in doubt, please check the listed branch.
tree: https://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs.git
branch: vfs.misc
[1/1] init: Add support for rootwait timeout parameter
https://git.kernel.org/vfs/vfs/c/3b0086ced97f