On Thu, 10 Aug 2023, Wenkai.Chung wrote:
> Hi Jones,
>
> I am writing to follow up on the email and patch I sent you on July 27th.
> Did you receive the patch? I appreciate your response.
I have the patch. It's in my queue.
> -----Original Message-----
> From: Wenkai.Chung
> Sent: Thursday, July 27, 2023 1:43 PM
> To: 'Lee Jones' <[email protected]>; '[email protected]' <[email protected]>
> Cc: Susi.Driver <[email protected]>
> Subject: [PATCH] Add a mfd driver to support Advantech EIO-IS200 series EC.
>
>
> Add a mfd driver to support Advantech EIO-IS200 series EC.
>
> Signed-off-by: wenkai.chung <[email protected]>
> ---
> drivers/mfd/Kconfig | 13 +
> drivers/mfd/Makefile | 1 +
> drivers/mfd/eiois200.h | 146 +++++++++++
> drivers/mfd/eiois200_core.c | 496 ++++++++++++++++++++++++++++++++++++
> 4 files changed, 656 insertions(+)
> create mode 100644 drivers/mfd/eiois200.h create mode 100644 drivers/mfd/eiois200_core.c
>
> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index 6f5b259a6d6a..ca792a077da9 100644
> --- a/drivers/mfd/Kconfig
> +++ b/drivers/mfd/Kconfig
> @@ -154,6 +154,19 @@ config MFD_ATMEL_HLCDC
> This driver provides common support for accessing the device,
> additional drivers must be enabled in order to use the
> functionality of the device.
> +
> + config MFD_EIOIS200
> + tristate "Advantech EIO-IS200 Embedded Controller core driver"
> + depends on X86 && m
> + default m
> + select MFD_CORE
> + help
> + Support for the EIO-IS200 controller.
> +
> + This driver provides common support for accessing the device,
> + additional drivers must be enabled in order to use the functionality
> + of the device.
> +
>
> config MFD_ATMEL_SMC
> bool
> diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index f3d1f1dc73b5..59e911054688 100644
> --- a/drivers/mfd/Makefile
> +++ b/drivers/mfd/Makefile
> @@ -276,6 +276,7 @@ obj-$(CONFIG_MFD_INTEL_M10_BMC_PMCI) += intel-m10-bmc-pmci.o
>
> obj-$(CONFIG_MFD_ATC260X) += atc260x-core.o
> obj-$(CONFIG_MFD_ATC260X_I2C) += atc260x-i2c.o
> +obj-$(CONFIG_MFD_EIOIS200) += eiois200_core.o
>
> rsmu-i2c-objs := rsmu_core.o rsmu_i2c.o
> rsmu-spi-objs := rsmu_core.o rsmu_spi.o
> diff --git a/drivers/mfd/eiois200.h b/drivers/mfd/eiois200.h new file mode 100644 index 000000000000..24a448d70d00
> --- /dev/null
> +++ b/drivers/mfd/eiois200.h
> @@ -0,0 +1,146 @@
> +/* SPDX-License-Identifier: GPL-2.0-only */
> +
> +#ifndef _MFD_EIOIS200_H_
> +#define _MFD_EIOIS200_H_
> +#include <linux/stddef.h>
> +#include <linux/io.h>
> +#include <linux/regmap.h>
> +
> +// Definition
> +#define EIOIS200_CHIPID1 0x20
> +#define EIOIS200_CHIPID2 0x21
> +#define EIOIS200_CHIPVER 0x22
> +#define EIOIS200_SIOCTRL 0x23
> +#define EIOIS200_SIOCTRL_SIOEN BIT(0)
> +#define EIOIS200_SIOCTRL_SWRST BIT(1)
> +#define EIOIS200_IRQCTRL 0x70
> +#define EIOIS200_CHIP_ID 0x9610
> +#define EIO201_211_CHIP_ID 0x9620
> +#define EIOIS200_ICCODE 0x10
> +#define EIO201_ICCODE 0x20
> +#define EIO211_ICCODE 0x21
> +
> +// LPC PNP
> +#define EIOIS200_PNP_INDEX 0x299
> +#define EIOIS200_PNP_DATA 0x29A
> +#define EIOIS200_SUB_PNP_INDEX 0x499
> +#define EIOIS200_SUB_PNP_DATA 0x49A
> +#define EIOIS200_EXT_MODE_ENTER 0x87
> +#define EIOIS200_EXT_MODE_EXIT 0xAA
> +
> +// LPC LDN
> +#define EIOIS200_LDN 0x07
> +#define EIOIS200_LDN_PMC0 0x0C
> +#define EIOIS200_LDN_PMC1 0x0D
> +
> +// PMC common registers
> +#define EIOIS200_LDAR 0x30
> +#define EIOIS200_LDAR_LDACT BIT(0)
> +#define EIOIS200_IOBA0H 0x60
> +#define EIOIS200_IOBA0L 0x61
> +#define EIOIS200_IOBA1H 0x62
> +#define EIOIS200_IOBA1L 0x63
> +#define EIOIS200_PMC_STATUS_IBF BIT(1)
> +#define EIOIS200_PMC_STATUS_OBF BIT(0)
> +#define EIOIS200_PMC_PORT 0x2F0
> +
> +// PMC (Power management channel) command list
> +#define EIOIS200_PMC_CMD_WDT_WRITE 0x2A
> +#define EIOIS200_PMC_CMD_WDT_READ 0x2B
> +#define EIOIS200_PMC_CMD_WDT_START 0x2C
> +#define EIOIS200_PMC_CMD_WDT_STOP 0x2D
> +#define EIOIS200_PMC_CMD_WDT_TRIG 0x2E
> +#define EIOIS200_PMC_CMD_ACPIRAM_READ 0x31
> +#define EIOIS200_PMC_CMD_CFG_SAVE 0x56
> +
> +// New PMC command list
> +#define EIOIS200_NEW_PMC_CMD_DOC_FW_READ 0x03
> +#define EIOIS200_NEW_PMC_CMD_SYSTEM_READ 0x55
> +#define EIOIS200_NEW_PMC_CMD_WDT_WRITE 0x2A
> +#define EIOIS200_NEW_PMC_CMD_WDT_READ 0x2B
> +
> +// OLD PMC
> +#define EIOIS200_PMC_NO_INDEX 0xFF
> +
> +// ACPI RAM Address Table
> +#define EIOIS200_ACPIRAM_VERSIONSECTION (0xFA)
> +#define EIOIS200_ACPIRAM_ICVENDOR (EIOIS200_ACPIRAM_VERSIONSECTION + 0x00)
> +#define EIOIS200_ACPIRAM_ICCODE (EIOIS200_ACPIRAM_VERSIONSECTION + 0x01)
> +#define EIOIS200_ACPIRAM_CODEBASE (EIOIS200_ACPIRAM_VERSIONSECTION + 0x02)
> +
> +/* Firmware **/
> +#define EIOIS200_F_SUB_NEW_CODE_BASE BIT(6) // Identity second EC code base version
> +#define EIOIS200_F_SUB_CHANGED BIT(7) // Setting second EC changed
> +#define EIOIS200_F_NEW_CODE_BASE BIT(8) // Identity code base version
> +#define EIOIS200_F_CHANGED BIT(9) // Setting changed
> +#define EIOIS200_F_SUB_CHIP_EXIST BIT(30) // Second EIO-IS200 exist
> +#define EIOIS200_F_CHIP_EXIST BIT(31) // EIO-IS200 exist
> +
> +/* Others **/
> +#define EC_NUM 2
> +
> +struct _pmc_port {
> + union {
> + u16 cmd;
> + u16 status;
> + };
> + u16 data;
> +};
> +
> +struct _eiois200_dev_port {
> + u16 idx;
> + u16 data;
> +};
> +
> +struct _pmc_op {
> + u8 cmd;
> + u8 index; // use 0xFF to identify PMC command with index or not.
> + u8 offset;
> + u8 len;
> + u8 *data;
> +};
> +
> +struct _pmc_new_op {
> + u8 cmd;
> + u8 control;
> + u8 device_id;
> + u8 size;
> + u8 *payload;
> +};
> +
> +enum eiois200_rw_operation {
> + OPERATION_READ,
> + OPERATION_WRITE,
> +};
> +
> +struct _eiois200_dev {
> + u32 flag;
> +
> + struct _pmc_port pmc;
> + struct _pmc_port pmc1;
> +
> + struct mutex eiois200_io_mutex; // mutex lock for eiois200 io access
> +};
> +
> +/* exported symbol */
> +//extern struct _eiois200_dev *eiois200_dev; int
> +eiois200_core_pmc_operation(const struct _pmc_port *pmc,
> + const struct _pmc_op *operation,
> + enum eiois200_rw_operation rw);
> +
> +int eiois200_core_new_pmc_operation(const struct _pmc_port *pmc,
> + const struct _pmc_new_op *operation);
> +
> +int eiois200_core_pmc_wait_ibf(const struct _pmc_port *pmc); int
> +eiois200_core_pmc_wait_obf(const struct _pmc_port *pmc);
> +
> +#define WAIT_IBF(pmc) eiois200_core_pmc_wait_ibf(pmc)
> +#define WAIT_OBF(pmc) eiois200_core_pmc_wait_obf(pmc)
> +#define NEW_CODE_BASE (eiois200_dev->flag & EIOIS200_F_NEW_CODE_BASE)
> +
> +#ifdef pr_fmt
> +#undef pr_fmt
> +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt #endif
> +
> +#endif
> diff --git a/drivers/mfd/eiois200_core.c b/drivers/mfd/eiois200_core.c new file mode 100644 index 000000000000..4be6c8651b6a
> --- /dev/null
> +++ b/drivers/mfd/eiois200_core.c
> @@ -0,0 +1,496 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * MFD driver for Advantech EIO-IS200 Embedded controller.
> + *
> + * This driver provides PMC commands interface for subdrivers.
> + *
> + * Copyright (C) 2023 Advantech Corporation. All rights reserved.
> + */
> +
> +#include <linux/uaccess.h>
> +#include <linux/mfd/core.h>
> +#include <linux/mutex.h>
> +#include <linux/delay.h>
> +#include <linux/isa.h>
> +#include "eiois200.h"
> +
> +static int timeout = 500;
> +module_param(timeout, int, 0);
> +MODULE_PARM_DESC(timeout,
> + "IO exponential increased timeout value. (default="
> + __MODULE_STRING(timeout) ")");
> +
> +struct _eiois200_dev_port eio_pnp_port[EC_NUM] = {
> + {EIOIS200_PNP_INDEX, EIOIS200_PNP_DATA },
> + {EIOIS200_SUB_PNP_INDEX, EIOIS200_SUB_PNP_DATA} };
> +
> +struct _eiois200_dev *eiois200_dev;
> +struct regmap *regmap_is200;
> +
> +static struct mfd_cell susi_mfd_devs[] = {
> + { .name = "eiois200_wdt"},
> +};
> +
> +/* For regmap */
> +static int reg_read(void *context, unsigned int reg, unsigned int *val)
> +{
> + *val = inb(reg);
> +
> + return 0;
> +}
> +
> +static int reg_write(void *context, unsigned int reg, unsigned int val)
> +{
> + outb(val, reg);
> +
> + return 0;
> +}
> +
> +struct regmap_range is200_rang[] = {
> + {EIOIS200_PNP_INDEX, EIOIS200_PNP_DATA },
> + {EIOIS200_SUB_PNP_INDEX, EIOIS200_SUB_PNP_DATA },
> + {EIOIS200_PMC_PORT, EIOIS200_PMC_PORT + 0x0F},
> +};
> +
> +static const struct regmap_access_table volatile_regs = {
> + .yes_ranges = is200_rang,
> + .n_yes_ranges = ARRAY_SIZE(is200_rang), };
> +
> +static const struct regmap_config pnp_regmap_config = {
> + .reg_bits = 16,
> + .val_bits = 8,
> + .volatile_table = &volatile_regs,
> +
> + .reg_write = reg_write,
> + .reg_read = reg_read,
> +};
> +
> +/* For EIO-IS200 pnp io port access */
> +static int is200_pnp_in(const struct _eiois200_dev_port *port, u8 idx)
> +{
> + int ret;
> +
> + regmap_write(regmap_is200, port->idx, idx);
> + regmap_read(regmap_is200, port->data, &ret);
> +
> + return ret;
> +}
> +
> +static void is200_pnp_out(const struct _eiois200_dev_port *port, u8
> +idx, u8 data) {
> + regmap_write(regmap_is200, port->idx, idx);
> + regmap_write(regmap_is200, port->data, data); }
> +
> +static void is200_ext_entry(const struct _eiois200_dev_port *port) {
> + regmap_write(regmap_is200, port->idx, EIOIS200_EXT_MODE_ENTER);
> + regmap_write(regmap_is200, port->idx, EIOIS200_EXT_MODE_ENTER); }
> +
> +static void eio_ext_leave(const struct _eiois200_dev_port *port) {
> + regmap_write(regmap_is200, port->idx, EIOIS200_EXT_MODE_EXIT); }
> +
> +/* EIO-IS200 io port access function for pmc command */ static int
> +pmc_out_data(const struct _pmc_port *pmc, u8 value) {
> + if (WAIT_IBF(pmc))
> + return -ETIME;
> +
> + regmap_write(regmap_is200, pmc->data, value);
> +
> + return 0;
> +}
> +
> +static int pmc_out_cmd(const struct _pmc_port *pmc, u8 value) {
> + if (WAIT_IBF(pmc))
> + return -ETIME;
> +
> + regmap_write(regmap_is200, pmc->cmd, value);
> +
> + return 0;
> +}
> +
> +static int pmc_in_data(const struct _pmc_port *pmc, u8 *value) {
> + int val;
> +
> + if (WAIT_OBF(pmc))
> + return -ETIME;
> +
> + regmap_read(regmap_is200, pmc->data, &val);
> +
> + *value = val & 0xFF;
> +
> + return 0;
> +}
> +
> +static int pmc_in_status(const struct _pmc_port *pmc) {
> + int val;
> +
> + regmap_read(regmap_is200, pmc->data, &val);
> +
> + return val;
> +}
> +
> +static void pmc_clear(const struct _pmc_port *pmc) {
> + int val;
> +
> + /* Read out previous garbage if needed */
> + if (pmc_in_status(pmc) & EIOIS200_PMC_STATUS_IBF)
> + regmap_read(regmap_is200, pmc->data, &val); }
> +
> +/* Wait input buffer clear */
> +int eiois200_core_pmc_wait_ibf(const struct _pmc_port *pmc) {
> + u32 time;
> + unsigned int val;
> +
> + for (time = 0 ; time < timeout ; time++) {
> + regmap_read(regmap_is200, pmc->status, &val);
> + if ((val & EIOIS200_PMC_STATUS_IBF) == 0)
> + return 0;
> +
> + /* incremental delay */
> + if (time * 10 < 1000)
> + ndelay(time * 10);
> + else
> + msleep(time / 100);
> + }
> +
> + /* over 0.5 s */
> + return -ETIME;
> +}
> +EXPORT_SYMBOL(eiois200_core_pmc_wait_ibf);
> +
> +/* Wait output buffer filled */
> +int eiois200_core_pmc_wait_obf(const struct _pmc_port *pmc) {
> + u32 time;
> + unsigned int val;
> +
> + for (time = 0 ; time < timeout ; time++) {
> + regmap_read(regmap_is200, pmc->status, &val);
> + if ((val & EIOIS200_PMC_STATUS_OBF))
> + return 0;
> +
> + /* incremental delay */
> + if (time * 10 < 1000)
> + ndelay(time * 10);
> + else
> + msleep(time / 100);
> + }
> +
> + /* over 0.5 s */
> + return -ETIME;
> +}
> +EXPORT_SYMBOL(eiois200_core_pmc_wait_obf);
> +
> +/* Execute a old pmc (power management channel) command */ int
> +eiois200_core_pmc_operation(const struct _pmc_port *pmc,
> + const struct _pmc_op *op,
> + enum eiois200_rw_operation rw)
> +{
> + bool read_cmd = rw == OPERATION_READ;
> + bool has_index = op->index == EIOIS200_PMC_NO_INDEX;
> +
> + mutex_lock(&eiois200_dev->eiois200_io_mutex);
> +
> + if (rw != OPERATION_READ && rw != OPERATION_WRITE)
> + return -EINVAL;
> +
> + pmc_clear(pmc);
> +
> + if (pmc_out_cmd(pmc, op->cmd))
> + goto exit;
> +
> + if (has_index && pmc_out_data(pmc, op->index))
> + goto exit;
> +
> + if (pmc_out_data(pmc, op->offset) ||
> + pmc_out_data(pmc, op->len))
> + goto exit;
> +
> + for (u8 i = 0 ; i < op->len ; i++)
> + if (read_cmd) {
> + if (pmc_in_data(pmc, &op->data[i]))
> + goto exit;
> + } else {
> + if (pmc_out_data(pmc, op->data[i]))
> + goto exit;
> + }
> +
> + mutex_unlock(&eiois200_dev->eiois200_io_mutex);
> + return 0;
> +
> +exit:
> + mutex_unlock(&eiois200_dev->eiois200_io_mutex);
> + return -ETIME;
> +}
> +EXPORT_SYMBOL(eiois200_core_pmc_operation);
> +
> +/* Execute a new pmc command (fixed length) */ int
> +eiois200_core_new_pmc_operation(const struct _pmc_port *pmc, const
> +struct _pmc_new_op *op) {
> + bool read_cmd = op->cmd & 0x01;
> +
> + mutex_lock(&eiois200_dev->eiois200_io_mutex);
> +
> + pmc_clear(pmc);
> +
> + if (pmc_out_cmd(pmc, op->cmd) ||
> + pmc_out_data(pmc, op->control) ||
> + pmc_out_data(pmc, op->device_id) ||
> + pmc_out_data(pmc, op->size))
> + goto exit;
> +
> + for (u8 i = 0 ; i < op->size ; i++)
> + if (read_cmd) {
> + if (pmc_in_data(pmc, &op->payload[i]))
> + goto exit;
> + } else {
> + if (pmc_out_data(pmc, op->payload[i]))
> + goto exit;
> + }
> +
> + mutex_unlock(&eiois200_dev->eiois200_io_mutex);
> + return 0;
> +
> +exit:
> + mutex_unlock(&eiois200_dev->eiois200_io_mutex);
> + return -ETIME;
> +}
> +EXPORT_SYMBOL(eiois200_core_new_pmc_operation);
> +
> +static int get_pmc_port(void)
> +{
> + u8 i = 0;
> +
> + mutex_lock(&eiois200_dev->eiois200_io_mutex);
> +
> + for (i = 0 ; i < EC_NUM ; i++) {
> + struct _eiois200_dev_port *port = eio_pnp_port + i;
> + struct _pmc_port *pmc_ptr = i == 0 ? &eiois200_dev->pmc :
> +&eiois200_dev->pmc1;
> +
> + is200_ext_entry(port);
> +
> + /* Switch to PMC device */
> + is200_pnp_out(port, EIOIS200_LDN, EIOIS200_LDN_PMC1);
> +
> + /* Active device */
> + is200_pnp_out(port, EIOIS200_LDAR, EIOIS200_LDAR_LDACT);
> +
> + /* Get PMC base port address */
> + pmc_ptr->data = is200_pnp_in(port, EIOIS200_IOBA0H) << 8;
> + pmc_ptr->data |= is200_pnp_in(port, EIOIS200_IOBA0L);
> + pmc_ptr->cmd = is200_pnp_in(port, EIOIS200_IOBA1H) << 8;
> + pmc_ptr->cmd |= is200_pnp_in(port, EIOIS200_IOBA1L);
> +
> + /* Disable IRQ */
> + is200_pnp_out(port, EIOIS200_IRQCTRL, 0);
> +
> + eio_ext_leave(port);
> +
> + if ((eiois200_dev->flag & EIOIS200_F_SUB_CHIP_EXIST) == 0)
> + break;
> + }
> +
> + mutex_unlock(&eiois200_dev->eiois200_io_mutex);
> +
> + return 0;
> +}
> +
> +static int eiois200_exist(void)
> +{
> + u16 chipid = 0;
> + u8 tmp = 0, i = 0;
> +
> + for (i = 0 ; i < EC_NUM ; i++) {
> + struct _eiois200_dev_port *port = eio_pnp_port + i;
> +
> + is200_ext_entry(port);
> +
> + chipid = is200_pnp_in(port, EIOIS200_CHIPID1) << 8;
> + chipid |= is200_pnp_in(port, EIOIS200_CHIPID2);
> +
> + if (chipid == EIOIS200_CHIP_ID || chipid == EIO201_211_CHIP_ID) {
> + /* Enable SIO devices */
> + pr_info("chipID = 0x%X\n", chipid);
> + tmp = is200_pnp_in(port, EIOIS200_SIOCTRL);
> + tmp |= EIOIS200_SIOCTRL_SIOEN;
> + is200_pnp_out(port, EIOIS200_SIOCTRL, tmp);
> +
> + eiois200_dev->flag |= EIOIS200_F_CHIP_EXIST;
> +
> + if (port->data == EIOIS200_SUB_PNP_DATA)
> + eiois200_dev->flag |= EIOIS200_F_SUB_CHIP_EXIST;
> +
> + get_pmc_port();
> +
> + eio_ext_leave(port);
> + return 0;
> + }
> +
> + eio_ext_leave(port);
> + }
> +
> + return -ENODEV;
> +}
> +
> +/* read information of acpi store in EC */ static uint8_t
> +acpiram_access(const struct _pmc_port *pmc, uint8_t acpi_ram_address) {
> + u8 ret;
> +
> + mutex_lock(&eiois200_dev->eiois200_io_mutex);
> +
> + /* clear previous garbage */
> + pmc_clear(pmc);
> + msleep(1);
> +
> + /* procedure for read data */
> + if (pmc_out_cmd(pmc, EIOIS200_PMC_CMD_ACPIRAM_READ) ||
> + pmc_out_data(pmc, acpi_ram_address) ||
> + pmc_out_data(pmc, 1) ||
> + pmc_in_data(pmc, &ret)) {
> + /* return 0 for error */
> + mutex_unlock(&eiois200_dev->eiois200_io_mutex);
> + return 0;
> + }
> +
> + mutex_unlock(&eiois200_dev->eiois200_io_mutex);
> + return ret;
> +}
> +
> +static int firmware_code_base(struct device *dev,
> + const struct _pmc_port *pmc)
> +{
> + u8 ic_vendor, ic_code, code_base;
> +
> + ic_vendor = acpiram_access(pmc, EIOIS200_ACPIRAM_ICVENDOR);
> + ic_code = acpiram_access(pmc, EIOIS200_ACPIRAM_ICCODE);
> + code_base = acpiram_access(pmc, EIOIS200_ACPIRAM_CODEBASE);
> +
> + if (ic_vendor != 'R')
> + goto exit;
> +
> + if (ic_code != EIOIS200_ICCODE &&
> + ic_code != EIO201_ICCODE &&
> + ic_code != EIO211_ICCODE)
> + goto exit;
> +
> + if (code_base == 0x80) {
> + eiois200_dev->flag |= EIOIS200_F_NEW_CODE_BASE;
> + return 0;
> + }
> +
> + if (code_base == 0 && (ic_code == EIO201_ICCODE ||
> + ic_code == EIO211_ICCODE))
> + return 0;
> +
> + exit:
> + dev_err(dev,
> + "Codebase check fail:\n"
> + "ic_vendor: 0x%X ,ic_code : 0x%X ,code_base : 0x%X\n",
> + ic_vendor, ic_code, code_base);
> + return -ENODEV;
> +}
> +
> +int eiois200_probe(struct device *dev, unsigned int id) {
> + int ret = 0;
> +
> + pr_err("timeout=%d\n", timeout);
> +
> + eiois200_dev = devm_kzalloc(dev, sizeof(struct _eiois200_dev), GFP_KERNEL);
> + if (!eiois200_dev)
> + return -ENOMEM;
> +
> + mutex_init(&eiois200_dev->eiois200_io_mutex);
> +
> + regmap_is200 = devm_regmap_init(dev, NULL, eiois200_dev, &pnp_regmap_config);
> + if (!regmap_is200)
> + return -ENOMEM;
> +
> + if (eiois200_exist()) {
> + dev_err(dev, "EIO IS-200 not detected.\n");
> + return -ENODEV;
> + }
> +
> + if (firmware_code_base(dev, &eiois200_dev->pmc)) {
> + dev_err(dev, "Codebase check fail\n");
> + return -EIO;
> + }
> +
> + dev_set_drvdata(dev, eiois200_dev);
> +
> + ret = devm_mfd_add_devices(dev, -1, susi_mfd_devs,
> + ARRAY_SIZE(susi_mfd_devs),
> + NULL, -1, NULL);
> + if (ret)
> + dev_err(dev, "Cannot add sub device (error = %d )\n", ret);
> +
> + return ret;
> +}
> +
> +void eiois200_config_save(const struct _pmc_port *pmc) {
> + mutex_lock(&eiois200_dev->eiois200_io_mutex);
> +
> + pmc_out_cmd(pmc, EIOIS200_PMC_CMD_CFG_SAVE);
> +
> + mutex_unlock(&eiois200_dev->eiois200_io_mutex);
> +}
> +
> +static int eiois200_store_settings(void) {
> + if ((eiois200_dev->flag & EIOIS200_F_CHIP_EXIST) == 0)
> + return 0;
> +
> + if (NEW_CODE_BASE)
> + return 0;
> +
> + if (eiois200_dev->flag & EIOIS200_F_CHANGED)
> + eiois200_config_save(&eiois200_dev->pmc);
> +
> + if (eiois200_dev->flag & EIOIS200_F_SUB_CHANGED)
> + eiois200_config_save(&eiois200_dev->pmc1);
> +
> + return 0;
> +}
> +
> +void eiois200_shutdown(struct device *dev, unsigned int id) {
> + eiois200_store_settings();
> +}
> +
> +int eiois200_suspend(struct device *dev, unsigned int id, pm_message_t
> +msg) {
> + return eiois200_store_settings();
> +}
> +
> +static struct isa_driver eiois200_driver = {
> + .probe = eiois200_probe,
> + .shutdown = eiois200_shutdown,
> + .suspend = eiois200_suspend,
> +
> + .driver = {
> + .owner = THIS_MODULE,
> + .name = KBUILD_MODNAME,
> + },
> +};
> +
> +module_isa_driver(eiois200_driver, 1);
> +
> +MODULE_AUTHOR("susi.driver <[email protected]>");
> +MODULE_DESCRIPTION("Mfd driver for Advantech EIO-IS200 EC");
> +MODULE_LICENSE("GPL v2");
> +
> --
> 2.34.1
>
--
Lee Jones [李琼斯]