Add the binding description and the corresponding driver for
the Kinetic KTD2026 and KTD2027.
Signed-off-by: André Apitzsch <[email protected]>
---
Changes in v2:
- Make binding description filename match compatible
- Address comments by Lee Jones
- Extend driver description in Kconfig
- Add copyright + link to datasheet
- Add unit to definition/variable names, where needed
- Define magic numbers
- Remove forward declaration of 'struct ktd202x'
- Remove superfluous comments
- Get rid of struct ktd202x_info
- Join ktd202x_chip_init() with ktd202x_chip_enable()
- Return the error on ktd202x_chip_disable()
- Remove unreachable case from chip_in_use()
- Rename ktd202x_brightness_set() argument from num_colors to num_channels
- Forward errors received in ktd202x_brightness_set()
- Remove variable for 'num_channels = 1'
- Add some explanations to blink time calculation
- Remove unneeded lcdev from ktd202x_blink_*_set()
- Add define for max brightness and replace deprecated LED_FULL by it
- Move setting led_classdev.brightness to ktd202x_brightness_*_set()
- Move mutex_lock inside ktd202x_blink_set()
- Add comment that 'color' property is optional (allow EINVAL)
- Replace escaped double quotes by single quotes
- Avoid overloading variable 'color'
- Do not lock during probe
- Remove usage of 'of_match_ptr'
- Document interrupt and pull-up supply, like done for aw2013[1]
- Fix error in num_steps calculation
- Link to v1: https://lore.kernel.org/r/[email protected]
[1] https://lore.kernel.org/linux-leds/[email protected]/
---
André Apitzsch (2):
dt-bindings: leds: Add Kinetic KTD2026/2027 LED
leds: add ktd202x driver
.../devicetree/bindings/leds/kinetic,ktd202x.yaml | 171 ++++++
drivers/leds/rgb/Kconfig | 13 +
drivers/leds/rgb/Makefile | 1 +
drivers/leds/rgb/leds-ktd202x.c | 625 +++++++++++++++++++++
4 files changed, 810 insertions(+)
---
base-commit: a47fc304d2b678db1a5d760a7d644dac9b067752
change-id: 20230618-ktd202x-546b2a7d240b
Best regards,
--
André Apitzsch <[email protected]>
Document Kinetic KTD2026/2027 LED driver devicetree bindings.
Signed-off-by: André Apitzsch <[email protected]>
---
.../devicetree/bindings/leds/kinetic,ktd202x.yaml | 171 +++++++++++++++++++++
1 file changed, 171 insertions(+)
diff --git a/Documentation/devicetree/bindings/leds/kinetic,ktd202x.yaml b/Documentation/devicetree/bindings/leds/kinetic,ktd202x.yaml
new file mode 100644
index 000000000000..832c030a5acf
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/kinetic,ktd202x.yaml
@@ -0,0 +1,171 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/kinetic,ktd202x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Kinetic KTD2026/7 RGB/White LED Driver
+
+maintainers:
+ - André Apitzsch <[email protected]>
+
+description: |
+ The KTD2026/7 is a RGB/White LED driver with I2C interface.
+
+ The data sheet can be found at:
+ https://www.kinet-ic.com/uploads/KTD2026-7-04h.pdf
+
+properties:
+ compatible:
+ enum:
+ - kinetic,ktd2026
+ - kinetic,ktd2027
+
+ reg:
+ maxItems: 1
+
+ vin-supply:
+ description: Regulator providing power to the "VIN" pin.
+
+ vio-supply:
+ description: Regulator providing power for pull-up of the I/O lines.
+ Note that this regulator does not directly connect to KTD2026, but is
+ needed for the correct operation of the status ("ST") and I2C lines.
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+ multi-led:
+ type: object
+ $ref: leds-class-multicolor.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+ patternProperties:
+ "^led@[0-3]$":
+ type: object
+ $ref: common.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ reg:
+ description: Index of the LED.
+ minimum: 0
+ maximum: 3
+
+ required:
+ - reg
+ - color
+
+ required:
+ - "#address-cells"
+ - "#size-cells"
+
+patternProperties:
+ "^led@[0-3]$":
+ type: object
+ $ref: common.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ reg:
+ description: Index of the LED.
+ minimum: 0
+ maximum: 3
+
+ required:
+ - reg
+
+required:
+ - compatible
+ - reg
+ - "#address-cells"
+ - "#size-cells"
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/leds/common.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led-controller@30 {
+ compatible = "kinetic,ktd2026";
+ reg = <0x30>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ vin-supply = <&pm8916_l17>;
+ vio-supply = <&pm8916_l6>;
+
+ led@0 {
+ reg = <0>;
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_RED>;
+ };
+
+ led@1 {
+ reg = <1>;
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_GREEN>;
+ };
+
+ led@2 {
+ reg = <2>;
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_BLUE>;
+ };
+ };
+ };
+ - |
+ #include <dt-bindings/leds/common.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led-controller@30 {
+ compatible = "kinetic,ktd2026";
+ reg = <0x30>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ vin-supply = <&pm8916_l17>;
+ vio-supply = <&pm8916_l6>;
+
+ multi-led {
+ color = <LED_COLOR_ID_RGB>;
+ function = LED_FUNCTION_STATUS;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@0 {
+ reg = <0>;
+ color = <LED_COLOR_ID_RED>;
+ };
+
+ led@1 {
+ reg = <1>;
+ color = <LED_COLOR_ID_GREEN>;
+ };
+
+ led@2 {
+ reg = <2>;
+ color = <LED_COLOR_ID_BLUE>;
+ };
+ };
+ };
+ };
--
2.42.0
This commit adds support for Kinetic KTD2026/7 RGB/White LED driver.
Signed-off-by: André Apitzsch <[email protected]>
---
drivers/leds/rgb/Kconfig | 13 +
drivers/leds/rgb/Makefile | 1 +
drivers/leds/rgb/leds-ktd202x.c | 625 ++++++++++++++++++++++++++++++++++++++++
3 files changed, 639 insertions(+)
diff --git a/drivers/leds/rgb/Kconfig b/drivers/leds/rgb/Kconfig
index 183bccc06cf3..a6a21f564673 100644
--- a/drivers/leds/rgb/Kconfig
+++ b/drivers/leds/rgb/Kconfig
@@ -14,6 +14,19 @@ config LEDS_GROUP_MULTICOLOR
To compile this driver as a module, choose M here: the module
will be called leds-group-multicolor.
+config LEDS_KTD202X
+ tristate "LED support for KTD202x Chips"
+ depends on I2C
+ depends on OF
+ select REGMAP_I2C
+ help
+ This option enables support for the Kinetic KTD2026/KTD2027
+ RGB/White LED driver found in different BQ mobile phones.
+ It is a 3 or 4 channel LED driver programmed via an I2C interface.
+
+ To compile this driver as a module, choose M here: the module
+ will be called leds-ktd202x.
+
config LEDS_PWM_MULTICOLOR
tristate "PWM driven multi-color LED Support"
depends on PWM
diff --git a/drivers/leds/rgb/Makefile b/drivers/leds/rgb/Makefile
index c11cc56384e7..243f31e4d70d 100644
--- a/drivers/leds/rgb/Makefile
+++ b/drivers/leds/rgb/Makefile
@@ -1,6 +1,7 @@
# SPDX-License-Identifier: GPL-2.0
obj-$(CONFIG_LEDS_GROUP_MULTICOLOR) += leds-group-multicolor.o
+obj-$(CONFIG_LEDS_KTD202X) += leds-ktd202x.o
obj-$(CONFIG_LEDS_PWM_MULTICOLOR) += leds-pwm-multicolor.o
obj-$(CONFIG_LEDS_QCOM_LPG) += leds-qcom-lpg.o
obj-$(CONFIG_LEDS_MT6370_RGB) += leds-mt6370-rgb.o
diff --git a/drivers/leds/rgb/leds-ktd202x.c b/drivers/leds/rgb/leds-ktd202x.c
new file mode 100644
index 000000000000..29b0919eabd9
--- /dev/null
+++ b/drivers/leds/rgb/leds-ktd202x.c
@@ -0,0 +1,625 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Kinetic KTD2026/7 RGB/White LED driver with I2C interface
+ *
+ * Copyright 2023 André Apitzsch <[email protected]>
+ *
+ * Datasheet: https://www.kinet-ic.com/uploads/KTD2026-7-04h.pdf
+ */
+
+#include <linux/i2c.h>
+#include <linux/led-class-multicolor.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
+
+#define KTD2026_NUM_LEDS 3
+#define KTD2027_NUM_LEDS 4
+#define KTD202X_MAX_LEDS 4
+
+/* Register bank */
+#define KTD202X_REG_RESET_CONTROL 0x00
+#define KTD202X_REG_FLASH_PERIOD 0x01
+#define KTD202X_REG_PWM1_TIMER 0x02
+#define KTD202X_REG_PWM2_TIMER 0x03
+#define KTD202X_REG_CHANNEL_CTRL 0x04
+#define KTD202X_REG_TRISE_FALL 0x05
+#define KTD202X_REG_LED_IOUT(x) (0x06 + (x))
+
+/* Register 0 */
+#define KTD202X_TIMER_SLOT_CONTROL_TSLOT1 0x00
+#define KTD202X_TIMER_SLOT_CONTROL_TSLOT2 0x01
+#define KTD202X_TIMER_SLOT_CONTROL_TSLOT3 0x02
+#define KTD202X_TIMER_SLOT_CONTROL_TSLOT4 0x03
+#define KTD202X_RSTR_RESET 0x07
+
+#define KTD202X_ENABLE_CTRL_WAKE 0x00 /* SCL High & SDA High */
+#define KTD202X_ENABLE_CTRL_SLEEP 0x08 /* SCL High & SDA Toggling */
+
+#define KTD202X_TRISE_FALL_SCALE_NORMAL 0x00
+#define KTD202X_TRISE_FALL_SCALE_SLOW_X2 0x20
+#define KTD202X_TRISE_FALL_SCALE_SLOW_X4 0x40
+#define KTD202X_TRISE_FALL_SCALE_FAST_X8 0x60
+
+/* Register 1 */
+#define KTD202X_FLASH_PERIOD_256_MS_LOG_RAMP 0x00
+
+/* Register 2-3 */
+#define KTD202X_FLASH_ON_TIME_0_4_PERCENT 0x01
+
+/* Register 4 */
+#define KTD202X_CHANNEL_CTRL_MASK(x) (BIT(2 * (x)) | BIT(2 * (x) + 1))
+#define KTD202X_CHANNEL_CTRL_OFF 0x00
+#define KTD202X_CHANNEL_CTRL_ON(x) BIT(2 * (x))
+#define KTD202X_CHANNEL_CTRL_PWM1(x) BIT(2 * (x) + 1)
+#define KTD202X_CHANNEL_CTRL_PWM2(x) (BIT(2 * (x)) | BIT(2 * (x) + 1))
+
+/* Register 5 */
+#define KTD202X_RAMP_TIMES_2_MS 0x00
+
+/* Register 6-9 */
+#define KTD202X_LED_CURRENT_10_mA 0x4f
+
+#define KTD202X_FLASH_PERIOD_MIN_MS 256
+#define KTD202X_FLASH_PERIOD_STEP_MS 128
+#define KTD202X_FLASH_PERIOD_MAX_STEPS 126
+#define KTD202X_FLASH_ON_MAX 256
+
+#define KTD202X_MAX_BRIGHTNESS 192
+
+static const struct reg_default ktd202x_reg_defaults[] = {
+ { KTD202X_REG_RESET_CONTROL, KTD202X_TIMER_SLOT_CONTROL_TSLOT1 |
+ KTD202X_ENABLE_CTRL_WAKE | KTD202X_TRISE_FALL_SCALE_NORMAL },
+ { KTD202X_REG_FLASH_PERIOD, KTD202X_FLASH_PERIOD_256_MS_LOG_RAMP },
+ { KTD202X_REG_PWM1_TIMER, KTD202X_FLASH_ON_TIME_0_4_PERCENT },
+ { KTD202X_REG_PWM2_TIMER, KTD202X_FLASH_ON_TIME_0_4_PERCENT },
+ { KTD202X_REG_CHANNEL_CTRL, KTD202X_CHANNEL_CTRL_OFF },
+ { KTD202X_REG_TRISE_FALL, KTD202X_RAMP_TIMES_2_MS },
+ { KTD202X_REG_LED_IOUT(0), KTD202X_LED_CURRENT_10_mA },
+ { KTD202X_REG_LED_IOUT(1), KTD202X_LED_CURRENT_10_mA },
+ { KTD202X_REG_LED_IOUT(2), KTD202X_LED_CURRENT_10_mA },
+ { KTD202X_REG_LED_IOUT(3), KTD202X_LED_CURRENT_10_mA },
+};
+
+struct ktd202x_led {
+ struct ktd202x *chip;
+ union {
+ struct led_classdev cdev;
+ struct led_classdev_mc mcdev;
+ };
+ u32 index;
+};
+
+struct ktd202x {
+ struct mutex mutex;
+ struct regulator_bulk_data regulators[2];
+ struct device *dev;
+ struct regmap *regmap;
+ bool enabled;
+ int num_leds;
+ struct ktd202x_led leds[];
+};
+
+static int ktd202x_chip_disable(struct ktd202x *chip)
+{
+ int ret;
+
+ if (!chip->enabled)
+ return 0;
+
+ regmap_write(chip->regmap, KTD202X_REG_RESET_CONTROL,
+ KTD202X_ENABLE_CTRL_SLEEP);
+
+ ret = regulator_bulk_disable(ARRAY_SIZE(chip->regulators),
+ chip->regulators);
+ if (ret) {
+ dev_err(chip->dev, "Failed to disable regulators: %d\n", ret);
+ return ret;
+ }
+
+ chip->enabled = false;
+ return 0;
+}
+
+static int ktd202x_chip_enable(struct ktd202x *chip)
+{
+ int ret;
+
+ if (chip->enabled)
+ return 0;
+
+ ret = regulator_bulk_enable(ARRAY_SIZE(chip->regulators),
+ chip->regulators);
+ if (ret) {
+ dev_err(chip->dev, "Failed to enable regulators: %d\n", ret);
+ return ret;
+ }
+ chip->enabled = true;
+
+ ret = regmap_write(chip->regmap, KTD202X_REG_RESET_CONTROL,
+ KTD202X_ENABLE_CTRL_WAKE);
+
+ if (ret) {
+ dev_err(chip->dev, "Failed to enable the chip: %d\n", ret);
+ ktd202x_chip_disable(chip);
+ }
+
+ return ret;
+}
+
+static bool ktd202x_chip_in_use(struct ktd202x *chip)
+{
+ int i;
+
+ for (i = 0; i < chip->num_leds; i++) {
+ if (chip->leds[i].cdev.brightness)
+ return true;
+ }
+ return false;
+}
+
+static int ktd202x_brightness_set(struct ktd202x_led *led,
+ struct mc_subled *subleds,
+ unsigned int num_channels)
+{
+ enum led_brightness brightness;
+ bool mode_blink;
+ int common_mode;
+ int channel;
+ int state;
+ int mode;
+ int ret;
+ int i;
+
+ if (ktd202x_chip_in_use(led->chip)) {
+ ret = ktd202x_chip_enable(led->chip);
+ if (ret)
+ return ret;
+ }
+
+ ret = regmap_read(led->chip->regmap, KTD202X_REG_CHANNEL_CTRL, &state);
+ if (ret)
+ return ret;
+
+ for (i = 0; i < num_channels; i++) {
+ channel = subleds[i].channel;
+ common_mode |= (state >> 2*channel) & (BIT(0) | BIT(1));
+ }
+ mode_blink = common_mode == KTD202X_CHANNEL_CTRL_PWM1(0);
+
+ for (i = 0; i < num_channels; i++) {
+ brightness = subleds[i].brightness;
+ channel = subleds[i].channel;
+
+ ret = regmap_write(led->chip->regmap,
+ KTD202X_REG_LED_IOUT(channel),
+ brightness ? brightness-1 : 0);
+ if (ret)
+ return ret;
+
+ if (brightness) {
+ if (mode_blink)
+ mode = KTD202X_CHANNEL_CTRL_PWM1(channel);
+ else
+ mode = KTD202X_CHANNEL_CTRL_ON(channel);
+ } else {
+ mode = KTD202X_CHANNEL_CTRL_OFF;
+ }
+ ret = regmap_update_bits(led->chip->regmap,
+ KTD202X_REG_CHANNEL_CTRL,
+ KTD202X_CHANNEL_CTRL_MASK(channel),
+ mode);
+ if (ret)
+ return ret;
+ }
+
+ if (!ktd202x_chip_in_use(led->chip))
+ return ktd202x_chip_disable(led->chip);
+
+ return 0;
+}
+
+static int ktd202x_brightness_single_set(struct led_classdev *cdev,
+ enum led_brightness value)
+{
+ struct ktd202x_led *led = container_of(cdev, struct ktd202x_led, cdev);
+ struct mc_subled info;
+ int ret;
+
+ cdev->brightness = value;
+
+ mutex_lock(&led->chip->mutex);
+
+ info.brightness = value;
+ info.channel = led->index;
+ ret = ktd202x_brightness_set(led, &info, 1);
+
+ mutex_unlock(&led->chip->mutex);
+
+ return ret;
+}
+
+static int ktd202x_brightness_mc_set(struct led_classdev *cdev,
+ enum led_brightness value)
+{
+ struct led_classdev_mc *mc = lcdev_to_mccdev(cdev);
+ struct ktd202x_led *led = container_of(mc, struct ktd202x_led, mcdev);
+ int ret;
+
+ cdev->brightness = value;
+
+ mutex_lock(&led->chip->mutex);
+
+ led_mc_calc_color_components(mc, value);
+ ret = ktd202x_brightness_set(led, mc->subled_info, mc->num_colors);
+
+ mutex_unlock(&led->chip->mutex);
+
+ return ret;
+}
+
+static int ktd202x_blink_set(struct ktd202x_led *led, unsigned long *delay_on,
+ unsigned long *delay_off, struct mc_subled *subleds,
+ unsigned int num_channels)
+{
+ unsigned long delay_total_ms;
+ int ret, num_steps, on;
+ u8 ctrl_mask = 0;
+ u8 ctrl_pwm1 = 0;
+ u8 ctrl_on = 0;
+ int i, channel;
+
+ mutex_lock(&led->chip->mutex);
+
+ for (i = 0; i < num_channels; i++) {
+ channel = subleds[i].channel;
+ ctrl_mask |= KTD202X_CHANNEL_CTRL_MASK(channel);
+ ctrl_on |= KTD202X_CHANNEL_CTRL_ON(channel);
+ ctrl_pwm1 |= KTD202X_CHANNEL_CTRL_PWM1(channel);
+ }
+
+ /* Never off - brightness is already set, disable blinking */
+ if (!*delay_off) {
+ ret = regmap_update_bits(led->chip->regmap,
+ KTD202X_REG_CHANNEL_CTRL,
+ ctrl_mask,
+ ctrl_on);
+ goto out;
+ }
+
+ /* Convert into values the HW will understand. */
+ /* Integer representation of time of flash period */
+ num_steps = (*delay_on + *delay_off - KTD202X_FLASH_PERIOD_MIN_MS) /
+ KTD202X_FLASH_PERIOD_STEP_MS;
+ num_steps = clamp(num_steps, 0, KTD202X_FLASH_PERIOD_MAX_STEPS);
+ /* Integer representation of percentage of LED ON time */
+ on = (*delay_on * KTD202X_FLASH_ON_MAX) / (*delay_on + *delay_off);
+
+ /* Actually used delay_{on,off} values */
+ delay_total_ms = num_steps * KTD202X_FLASH_PERIOD_STEP_MS +
+ KTD202X_FLASH_PERIOD_MIN_MS;
+ *delay_on = (delay_total_ms * on) / KTD202X_FLASH_ON_MAX;
+ *delay_off = delay_total_ms - *delay_on;
+
+ /* Set timings */
+ ret = regmap_write(led->chip->regmap, KTD202X_REG_FLASH_PERIOD,
+ num_steps);
+ if (ret)
+ goto out;
+
+ ret = regmap_write(led->chip->regmap, KTD202X_REG_PWM1_TIMER, on);
+ if (ret)
+ goto out;
+
+ ret = regmap_update_bits(led->chip->regmap, KTD202X_REG_CHANNEL_CTRL,
+ ctrl_mask,
+ ctrl_pwm1);
+out:
+ mutex_unlock(&led->chip->mutex);
+ return ret;
+}
+
+static int ktd202x_blink_single_set(struct led_classdev *cdev,
+ unsigned long *delay_on,
+ unsigned long *delay_off)
+{
+ struct ktd202x_led *led = container_of(cdev, struct ktd202x_led, cdev);
+ struct mc_subled info;
+ int ret;
+
+ if (!cdev->brightness) {
+ ret = ktd202x_brightness_single_set(cdev, KTD202X_MAX_BRIGHTNESS);
+ if (ret)
+ return ret;
+ }
+
+ /* If no blink specified, default to 1 Hz. */
+ if (!*delay_off && !*delay_on) {
+ *delay_off = 500;
+ *delay_on = 500;
+ }
+
+ /* Never on - just set to off */
+ if (!*delay_on)
+ return ktd202x_brightness_single_set(cdev, LED_OFF);
+
+ info.channel = led->index;
+
+ return ktd202x_blink_set(led, delay_on, delay_off, &info, 1);
+}
+
+static int ktd202x_blink_mc_set(struct led_classdev *cdev,
+ unsigned long *delay_on,
+ unsigned long *delay_off)
+{
+ struct led_classdev_mc *mc = lcdev_to_mccdev(cdev);
+ struct ktd202x_led *led = container_of(mc, struct ktd202x_led, mcdev);
+ int ret;
+
+ if (!cdev->brightness) {
+ ret = ktd202x_brightness_mc_set(cdev, KTD202X_MAX_BRIGHTNESS);
+ if (ret)
+ return ret;
+ }
+
+ /* If no blink specified, default to 1 Hz. */
+ if (!*delay_off && !*delay_on) {
+ *delay_off = 500;
+ *delay_on = 500;
+ }
+
+ /* Never on - just set to off */
+ if (!*delay_on)
+ return ktd202x_brightness_mc_set(cdev, LED_OFF);
+
+ return ktd202x_blink_set(led, delay_on, delay_off, mc->subled_info,
+ mc->num_colors);
+}
+
+static int ktd202x_add_led(struct ktd202x *chip, struct device_node *np,
+ unsigned int index)
+{
+ struct ktd202x_led *led = &chip->leds[index];
+ struct led_init_data init_data = {};
+ struct led_classdev *cdev;
+ struct device_node *child;
+ struct mc_subled *info;
+ int num_channels;
+ u32 color = 0;
+ u32 reg;
+ int ret;
+ int i;
+
+ /* Color property is optional in single color case */
+ ret = of_property_read_u32(np, "color", &color);
+ if (ret < 0 && ret != -EINVAL) {
+ dev_err(chip->dev, "failed to parse 'color' of %pOF\n", np);
+ return ret;
+ }
+
+ if (color == LED_COLOR_ID_RGB) {
+ num_channels = of_get_available_child_count(np);
+ if (!num_channels || num_channels > chip->num_leds)
+ return -EINVAL;
+ } else {
+ num_channels = 1;
+ }
+
+ led->chip = chip;
+
+ if (color == LED_COLOR_ID_RGB) {
+ info = devm_kcalloc(chip->dev, num_channels, sizeof(*info),
+ GFP_KERNEL);
+ if (!info)
+ return -ENOMEM;
+
+ i = 0;
+ for_each_available_child_of_node(np, child) {
+ u32 mono_color = 0;
+
+ ret = of_property_read_u32(child, "reg", ®);
+ if (ret != 0 || reg >= chip->num_leds) {
+ dev_err(chip->dev, "invalid 'reg' of %pOFn\n",
+ np);
+ return -EINVAL;
+ }
+
+ ret = of_property_read_u32(child, "color", &mono_color);
+ if (ret < 0 && ret != -EINVAL) {
+ dev_err(chip->dev,
+ "failed to parse 'color' of %pOF\n",
+ np);
+ return ret;
+ }
+
+ info[i].color_index = mono_color;
+ info[i].channel = reg;
+ info[i].intensity = 0;
+ i++;
+ }
+
+ led->mcdev.subled_info = info;
+ led->mcdev.num_colors = num_channels;
+
+ cdev = &led->mcdev.led_cdev;
+ cdev->brightness_set_blocking = ktd202x_brightness_mc_set;
+ cdev->blink_set = ktd202x_blink_mc_set;
+ } else {
+ ret = of_property_read_u32(np, "reg", ®);
+ if (ret != 0 || reg >= chip->num_leds) {
+ dev_err(chip->dev, "invalid 'reg' of %pOFn\n", np);
+ return -EINVAL;
+ }
+ led->index = reg;
+
+ cdev = &led->cdev;
+ cdev->brightness_set_blocking = ktd202x_brightness_single_set;
+ cdev->blink_set = ktd202x_blink_single_set;
+ }
+
+ cdev->max_brightness = KTD202X_MAX_BRIGHTNESS;
+
+ init_data.fwnode = of_fwnode_handle(np);
+
+ if (color == LED_COLOR_ID_RGB)
+ ret = devm_led_classdev_multicolor_register_ext(chip->dev,
+ &led->mcdev,
+ &init_data);
+ else
+ ret = devm_led_classdev_register_ext(chip->dev, &led->cdev,
+ &init_data);
+ if (ret) {
+ dev_err(chip->dev, "unable to register %s\n", cdev->name);
+ of_node_put(np);
+ }
+
+ return ret;
+}
+
+static int ktd202x_probe_dt(struct ktd202x *chip)
+{
+ struct device_node *np = dev_of_node(chip->dev), *child;
+ unsigned int i;
+ int count, ret;
+
+ chip->num_leds = (int)(unsigned long)of_device_get_match_data(chip->dev);
+
+ count = of_get_available_child_count(np);
+ if (!count || count > chip->num_leds)
+ return -EINVAL;
+
+ regmap_write(chip->regmap, KTD202X_REG_RESET_CONTROL,
+ KTD202X_RSTR_RESET);
+
+ /* Allow the device to execute the complete reset */
+ usleep_range(200, 300);
+
+ i = 0;
+ for_each_available_child_of_node(np, child) {
+ ret = ktd202x_add_led(chip, child, i);
+ if (ret)
+ return ret;
+ i++;
+ }
+
+ return 0;
+}
+
+static const struct regmap_config ktd202x_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .max_register = 0x09,
+ .cache_type = REGCACHE_FLAT,
+ .reg_defaults = ktd202x_reg_defaults,
+ .num_reg_defaults = ARRAY_SIZE(ktd202x_reg_defaults),
+};
+
+static int ktd202x_probe(struct i2c_client *client)
+{
+ struct device *dev = &client->dev;
+ struct ktd202x *chip;
+ int count;
+ int ret;
+
+ count = device_get_child_node_count(dev);
+ if (!count || count > KTD202X_MAX_LEDS)
+ return dev_err_probe(dev, -EINVAL,
+ "Incorrect number of leds (%d)", count);
+
+ chip = devm_kzalloc(dev, struct_size(chip, leds, count), GFP_KERNEL);
+ if (!chip)
+ return -ENOMEM;
+
+ mutex_init(&chip->mutex);
+
+ chip->dev = dev;
+ i2c_set_clientdata(client, chip);
+
+ chip->regmap = devm_regmap_init_i2c(client, &ktd202x_regmap_config);
+ if (IS_ERR(chip->regmap)) {
+ ret = dev_err_probe(dev, PTR_ERR(chip->regmap),
+ "Failed to allocate register map.\n");
+ goto error;
+ }
+
+ chip->regulators[0].supply = "vin";
+ chip->regulators[1].supply = "vio";
+ ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(chip->regulators),
+ chip->regulators);
+ if (ret < 0) {
+ dev_err_probe(dev, ret, "Failed to request regulators.\n");
+ goto error;
+ }
+
+ ret = regulator_bulk_enable(ARRAY_SIZE(chip->regulators),
+ chip->regulators);
+ if (ret) {
+ dev_err_probe(dev, ret, "Failed to enable regulators.\n");
+ goto error;
+ }
+
+ ret = ktd202x_probe_dt(chip);
+ if (ret < 0)
+ goto error_reg;
+
+ ret = regulator_bulk_disable(ARRAY_SIZE(chip->regulators),
+ chip->regulators);
+ if (ret) {
+ dev_err_probe(dev, ret, "Failed to disable regulators.\n");
+ goto error;
+ }
+
+ return 0;
+
+error_reg:
+ regulator_bulk_disable(ARRAY_SIZE(chip->regulators),
+ chip->regulators);
+
+error:
+ mutex_destroy(&chip->mutex);
+ return ret;
+}
+
+static void ktd202x_remove(struct i2c_client *client)
+{
+ struct ktd202x *chip = i2c_get_clientdata(client);
+
+ ktd202x_chip_disable(chip);
+
+ mutex_destroy(&chip->mutex);
+}
+
+static void ktd202x_shutdown(struct i2c_client *client)
+{
+ struct ktd202x *chip = i2c_get_clientdata(client);
+
+ /* Reset registers to make sure all off before shutdown */
+ regmap_write(chip->regmap, KTD202X_REG_RESET_CONTROL,
+ KTD202X_RSTR_RESET);
+}
+
+static const struct of_device_id ktd202x_match_table[] = {
+ { .compatible = "kinetic,ktd2026", .data = (void *)KTD2026_NUM_LEDS },
+ { .compatible = "kinetic,ktd2027", .data = (void *)KTD2027_NUM_LEDS },
+ {},
+};
+
+MODULE_DEVICE_TABLE(of, ktd202x_match_table);
+
+static struct i2c_driver ktd202x_driver = {
+ .driver = {
+ .name = "leds-ktd202x",
+ .of_match_table = ktd202x_match_table,
+ },
+ .probe_new = ktd202x_probe,
+ .remove = ktd202x_remove,
+ .shutdown = ktd202x_shutdown,
+};
+module_i2c_driver(ktd202x_driver);
+
+MODULE_AUTHOR("André Apitzsch <[email protected]>");
+MODULE_DESCRIPTION("Kinetic KTD2026/7 LED driver");
+MODULE_LICENSE("GPL");
--
2.42.0