The driver has OF match table, still it uses ID lookup table for
retrieving match data. Currently the driver is working on the
assumption that a I2C device registered via OF will always match a
legacy I2C device ID. The correct approach is to have an OF device ID
table using of_device_match_data() if the devices are registered via OF.
Signed-off-by: Biju Das <[email protected]>
---
drivers/pinctrl/pinctrl-mcp23s08_i2c.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/pinctrl/pinctrl-mcp23s08_i2c.c b/drivers/pinctrl/pinctrl-mcp23s08_i2c.c
index 3dd1bd8e73eb..393d9b099cc5 100644
--- a/drivers/pinctrl/pinctrl-mcp23s08_i2c.c
+++ b/drivers/pinctrl/pinctrl-mcp23s08_i2c.c
@@ -10,9 +10,8 @@
static int mcp230xx_probe(struct i2c_client *client)
{
- const struct i2c_device_id *id = i2c_client_get_device_id(client);
struct device *dev = &client->dev;
- unsigned int type = id->driver_data;
+ unsigned int type;
struct mcp23s08 *mcp;
int ret;
@@ -20,6 +19,7 @@ static int mcp230xx_probe(struct i2c_client *client)
if (!mcp)
return -ENOMEM;
+ type = (uintptr_t)i2c_get_match_data(client);
switch (type) {
case MCP_TYPE_008:
mcp->regmap = devm_regmap_init_i2c(client, &mcp23x08_regmap);
--
2.25.1