Patch 1, add UMP518 pmic adc description and sample in dt-bindings.
Patch 2, add UMP serise pmic adc driver, support both voltage and current mode.
Mingjin Yang (2):
dt-bindings: iio: adc: Add support for ump518 pmic adc
iio: adc: sprd_pmic_adc: Add support for UMP serise pmic adc
.../bindings/iio/adc/sprd,sc2720-adc.yaml | 2 +
drivers/iio/adc/Kconfig | 10 +
drivers/iio/adc/Makefile | 1 +
drivers/iio/adc/sprd_pmic_adc.c | 1298 +++++++++++++++++
4 files changed, 1311 insertions(+)
create mode 100644 drivers/iio/adc/sprd_pmic_adc.c
--
2.17.1
Add ump518 pmic adc description and sample in dt-bindings.
Signed-off-by: Mingjin Yang <[email protected]>
---
Documentation/devicetree/bindings/iio/adc/sprd,sc2720-adc.yaml | 2 ++
1 file changed, 2 insertions(+)
diff --git a/Documentation/devicetree/bindings/iio/adc/sprd,sc2720-adc.yaml b/Documentation/devicetree/bindings/iio/adc/sprd,sc2720-adc.yaml
index 8181cf9a8e07..f28d188d83da 100644
--- a/Documentation/devicetree/bindings/iio/adc/sprd,sc2720-adc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/sprd,sc2720-adc.yaml
@@ -21,6 +21,7 @@ properties:
- sprd,sc2730-adc
- sprd,sc2731-adc
- sprd,ump9620-adc
+ - sprd,ump518-adc
reg:
maxItems: 1
@@ -46,6 +47,7 @@ allOf:
contains:
enum:
- sprd,ump9620-adc
+ - sprd,ump518-adc
then:
properties:
nvmem-cells:
--
2.17.1
This patch adds support for UNISOC UMP family
of ADC driver. The ADC peripheral can support both
voltage and current mode whose input signal is
connected to the PMIC ADC AMUX.
Signed-off-by: Mingjin Yang <[email protected]>
---
drivers/iio/adc/Kconfig | 10 +
drivers/iio/adc/Makefile | 1 +
drivers/iio/adc/sprd_pmic_adc.c | 1298 +++++++++++++++++++++++++++++++
3 files changed, 1309 insertions(+)
create mode 100644 drivers/iio/adc/sprd_pmic_adc.c
diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
index dc14bde31ac1..39476abfbd8a 100644
--- a/drivers/iio/adc/Kconfig
+++ b/drivers/iio/adc/Kconfig
@@ -1375,6 +1375,16 @@ config TWL6030_GPADC
This driver can also be built as a module. If so, the module will be
called twl6030-gpadc.
+config SPRD_PMIC_ADC
+ tristate "Unisoc PMIC ADC"
+ depends on MFD_SC27XX_PMIC || COMPILE_TEST
+ help
+ Say yes here to build support for the integrated ADC inside the
+ Unisoc PMICs.
+
+ This driver can also be built as a module. If so, the module
+ will be called sprd_pmic_adc.
+
config VF610_ADC
tristate "Freescale vf610 ADC driver"
depends on HAS_IOMEM
diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile
index eb6e891790fb..1956dea9d543 100644
--- a/drivers/iio/adc/Makefile
+++ b/drivers/iio/adc/Makefile
@@ -95,6 +95,7 @@ obj-$(CONFIG_RICHTEK_RTQ6056) += rtq6056.o
obj-$(CONFIG_RZG2L_ADC) += rzg2l_adc.o
obj-$(CONFIG_SC27XX_ADC) += sc27xx_adc.o
obj-$(CONFIG_SPEAR_ADC) += spear_adc.o
+obj-$(CONFIG_SPRD_PMIC_ADC) += sprd_pmic_adc.o
obj-$(CONFIG_SUN4I_GPADC) += sun4i-gpadc-iio.o
obj-$(CONFIG_STM32_ADC_CORE) += stm32-adc-core.o
obj-$(CONFIG_STM32_ADC) += stm32-adc.o
diff --git a/drivers/iio/adc/sprd_pmic_adc.c b/drivers/iio/adc/sprd_pmic_adc.c
new file mode 100644
index 000000000000..6113bd84cd77
--- /dev/null
+++ b/drivers/iio/adc/sprd_pmic_adc.c
@@ -0,0 +1,1298 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (C) 2020 Unisoc Inc.
+
+#include <linux/hwspinlock.h>
+#include <linux/iio/iio.h>
+#include <linux/math64.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/nvmem-consumer.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
+#include <linux/slab.h>
+#include <linux/sort.h>
+
+/* ADC controller registers definition */
+#define SPRD_ADC_CTL 0x0
+
+#define SPRD_ADC_CH_CFG 0x4
+#define SPRD_ADC_CHN_ID_MASK GENMASK(4, 0)
+
+#define SPRD_ADC_DATA 0x4c
+#define SPRD_ADC_DATA_MASK GENMASK(11, 0)
+
+#define SPRD_ADC_INT_EN 0x50
+#define SPRD_ADC_IRQ_EN BIT(0)
+
+#define SPRD_ADC_INT_CLR 0x54
+#define SPRD_ADC_IRQ_CLR BIT(0)
+
+#define SPRD_ADC_INT_STS 0x58
+
+#define SPRD_ADC_INT_RAW 0x5c
+#define SPRD_ADC_IRQ_RAW BIT(0)
+
+/* Bits and mask definition for SPRD_ADC_CTL register */
+#define SPRD_ADC_EN BIT(0)
+#define SPRD_ADC_CHN_RUN BIT(1)
+#define SPRD_ADC_12BIT_MODE BIT(2)
+#define SPRD_ADC_RUN_NUM_MASK GENMASK(7, 4)
+#define SPRD_ADC_RUN_NUM_SHIFT 4
+#define SPRD_ADC_AVERAGE_SHIFT 8
+#define SPRD_ADC_AVERAGE_MASK GENMASK(10, 8)
+
+/* Timeout (ms) for the trylock of hardware spinlocks */
+#define SPRD_ADC_HWLOCK_TIMEOUT 5000
+
+/* Maximum ADC channel number */
+#define SPRD_ADC_CHANNEL_MAX 32
+
+/* Timeout (us) for ADC data conversion according to ADC datasheet */
+#define SPRD_ADC_RDY_TIMEOUT 1000000
+#define SPRD_ADC_POLL_RAW_STATUS 500
+
+/* ADC voltage ratio definition */
+#define SPRD_RATIO_NUMERATOR_OFFSET 16
+#define SPRD_RATIO_DENOMINATOR_MASK GENMASK(15, 0)
+#define RATIO(n, d) (((n) << SPRD_RATIO_NUMERATOR_OFFSET) | (d))
+#define R_INVALID (0xffffffff)
+#define RATIO_DEF RATIO(1, 1)
+
+/* ADC specific channel reference voltage 3.5V */
+#define SPRD_ADC_REFVOL_VDD35 3500000
+
+/* ADC default channel reference voltage is 2.8V */
+#define SPRD_ADC_REFVOL_VDD28 2800000
+
+#define SPRD_ADC_CELL_MAX (2)
+#define SPRD_ADC_INVALID_DATA (0XFFFFFFFF)
+#define SPRD_ADC_INIT_MAGIC (0xa7a77a7a)
+#define ADC_MESURE_NUMBER_SW (15)
+#define ADC_MESURE_NUMBER_HW_DEF (3) /* 2 << 3 = 8 times */
+
+#define CH_DATA_FMT "ch%d_d[(%d %d 0x%x 0x%x) | (%u/%u), (%u/%u), (%u/%u), (%u/%u), (%u/%u)]\n"
+
+#define SPRD_ADC_CHANNEL(index, mask) { \
+ .type = IIO_VOLTAGE, \
+ .channel = index, \
+ .info_mask_separate = mask | BIT(IIO_CHAN_INFO_SCALE), \
+ .datasheet_name = "CH##index", \
+ .indexed = 1, \
+}
+
+#define CH_DATA_INIT(sl, filter, isen, ip_r) \
+{ \
+ .scale = sl, \
+ .isen_info = isen, \
+ .filter_info = filter, \
+ .ip_ratio = ip_r, \
+ .ch_aux_ratio = {0, 0, 0, 0}, \
+ .inited = SPRD_ADC_INIT_MAGIC, \
+}
+
+#define CALIB_INFO_INIT(ch, sl, gph) \
+{ \
+ .channel = ch, \
+ .scale = sl, \
+ .graph = gph, \
+ .inited = SPRD_ADC_INIT_MAGIC, \
+}
+
+#define GRAPH_POINT_INIT(v0, a0, v1, a1)\
+ \
+ .volt0 = v0, \
+ .adc0 = a0, \
+ .volt1 = v1, \
+ .adc1 = a1, \
+ .inited = SPRD_ADC_INIT_MAGIC
+
+#define REG_BIT_INIT(b_base, reg_address, b_mask, b_offset, set, clr, func, verse) \
+{ \
+ .base = b_base, \
+ .reg_addr = reg_address, \
+ .mask = b_mask, \
+ .offset = b_offset, \
+ .val_set = set, \
+ .val_clr = clr, \
+ .inited = SPRD_ADC_INIT_MAGIC, \
+ .get_val = func, \
+ .reverse = verse \
+}
+
+enum SPRD_PMIC_TYPE {
+ UMP9620_ADC,
+ UMP518_ADC,
+};
+
+enum SPRD_ADC_GRAPH_TYPE {
+ TWO_CELL_GRAPH,
+ SPRD_ADC_GRAPH_TYPE_MAX
+};
+
+enum SPRD_ADC_GRAPH_OFFSET {
+ GRAPH_BIG,
+ GRAPH_SMALL,
+ GRAPH_VBAT_DET,
+ GRAPH_MAX
+};
+
+enum SPRD_ADC_SCALE {
+ SCALE_00,
+ SCALE_01,
+ SCALE_10,
+ SCALE_11,
+ SPRD_ADC_SCALE_MAX
+};
+
+enum SPRD_ADC_REG_TYPE {
+ REG_MODULE_EN,
+ REG_CLK_EN,
+ REG_SOFT_RST,
+ REG_XTL_CTRL,
+ REG_SCALE,
+ REG_CFG_FIXED_ST = 11,/* FIXED CFG START */
+ REG_CAL_EN,
+ REG_NTC_MUX,
+ REG_CFG_FIXED_END,/* FIXED CFG END */
+ REG_ISEN_ST = 21,/* CURRENT MODE START */
+ REG_ISEN0,
+ REG_ISEN1,
+ REG_ISEN2,
+ REG_ISEN3,
+ REG_ISEN_END,/* CURRENT MODE END */
+ SPRD_ADC_REG_TYPE_MAX
+};
+
+enum SPRD_ADC_REG_BASE {
+ BASE_GLB,
+ BASE_ANA
+};
+
+struct sprd_adc_pm_data {
+ struct regmap *clk_regmap;
+ u32 clk_reg;/* adc clk26 vote reg */
+ u32 clk_reg_mask;/* adc clk26 vote reg mask */
+ bool dev_suspended;
+};
+
+/*bit[0-7]: scale
+ *bit[8-15]: filter_info(bit8: sw filter support, bit[9-15]: hw filter val(2<<n))
+ *bit[16-23]: isen_info (bit16: isen support, bit[17-23]: isen val)
+ */
+struct sprd_adc_channel_data {
+ int scale;
+ int graph;
+ int isen_info;
+ int filter_info;
+ int ip_ratio;
+ int ch_aux_ratio[SPRD_ADC_SCALE_MAX];
+ int inited;
+};
+
+struct calib_info {
+ int channel;
+ int scale;
+ int graph;
+ int ch_aux_ratio[SPRD_ADC_SCALE_MAX];
+ int inited;
+};
+
+struct reg_bit {
+ u32 base;
+ u32 reg_addr;
+ u32 mask;
+ u32 offset;
+ u32 val_set;
+ u32 val_clr;
+ u32 inited;
+ bool reverse;
+ u32 (*get_val)(void *pri, int ch, bool set);
+};
+
+struct sprd_adc_data {
+ struct iio_dev *indio_dev;
+ struct device *dev;
+ struct regmap *regmap;
+ /* lock to protect against multiple access to the device */
+ struct mutex mutex;
+ /*
+ * One hardware spinlock to synchronize between the multiple
+ * subsystems which will access the unique ADC controller.
+ */
+ struct hwspinlock *hwlock;
+ u32 base;
+ int irq;
+ struct sprd_adc_channel_data ch_data[SPRD_ADC_CHANNEL_MAX];
+ const struct sprd_adc_variant_data *var_data;
+ struct sprd_adc_pm_data pm_data;
+};
+
+struct sprd_adc_variant_data {
+ const int pmic_type;
+ const struct reg_bit *const reg_list;
+ const u32 glb_reg_base;
+ const u32 adc_reg_base_offset;
+ const u32 graph_index;
+ const struct calib_info calib_infos[GRAPH_MAX];
+ const int aux_ratio_comm[SPRD_ADC_SCALE_MAX];
+ void (*const ch_data_init)(struct sprd_adc_data *data);
+};
+
+struct sprd_adc_linear_graph {
+ const char *cell_names[SPRD_ADC_CELL_MAX+1];/* must end with NULL point */
+ int cell_value[SPRD_ADC_CELL_MAX+1];
+ void (*const calibrate)(struct sprd_adc_linear_graph *graph);
+ const int volt0;
+ int adc0;
+ const int volt1;
+ int adc1;
+ const int inited;
+};
+
+struct sprd_adc_graphs {
+ struct sprd_adc_linear_graph adc_graphs[GRAPH_MAX];
+};
+
+static void sprd_adc_calib_with_two_cell(struct sprd_adc_linear_graph *graph);
+static u32 get_isen(void *pri, int ch, bool enable);
+static int sprd_adc_soft_rst(struct sprd_adc_data *data);
+static int sprd_adc_hw_enable(struct sprd_adc_data *data);
+static inline u32 GET_REG_ADDR(struct sprd_adc_data *data, int index)
+{
+ u32 base = ((data->var_data->reg_list[index].base == BASE_GLB)
+ ? (data->var_data->glb_reg_base)
+ : (data->base - data->var_data->adc_reg_base_offset));
+ return (base + data->var_data->reg_list[index].reg_addr);
+}
+
+static inline void ratio_to_u32_fract(u32 ratio, struct u32_fract *fract)
+{
+ fract->numerator = ratio >> SPRD_RATIO_NUMERATOR_OFFSET;
+ fract->denominator = ratio & SPRD_RATIO_DENOMINATOR_MASK;
+}
+
+static struct sprd_adc_graphs sprd_adc_graphs_array[] = {
+ [TWO_CELL_GRAPH] = {
+ .adc_graphs = {
+ [GRAPH_BIG] = {
+ .cell_names = {"big_scale_calib1", "big_scale_calib2", NULL},
+ .calibrate = sprd_adc_calib_with_two_cell,
+ GRAPH_POINT_INIT(4200, 3310, 3600, 2832),
+ },
+ [GRAPH_SMALL] = {
+ .cell_names = {"small_scale_calib1", "small_scale_calib2", NULL},
+ .calibrate = sprd_adc_calib_with_two_cell,
+ GRAPH_POINT_INIT(1000, 3413, 100, 341),
+ },
+ [GRAPH_VBAT_DET] = {
+ .cell_names = {"vbat_det_cal1", "vbat_det_cal2", NULL},
+ .calibrate = sprd_adc_calib_with_two_cell,
+ GRAPH_POINT_INIT(1400, 3482, 200, 476),
+ },
+ },
+ },
+};
+
+static const struct reg_bit regs_ump9620[] = {
+ [REG_MODULE_EN] = REG_BIT_INIT(BASE_GLB, 0x08, BIT(5), 5, 1, 0, NULL, false),
+ [REG_CLK_EN] = REG_BIT_INIT(BASE_GLB, 0x0c, GENMASK(6, 5), 5, 0x3, 0, NULL, false),
+ [REG_SOFT_RST] = REG_BIT_INIT(BASE_GLB, 0x14, BIT(6), 6, 1, 0, NULL, false),
+ [REG_XTL_CTRL] = REG_BIT_INIT(BASE_GLB, 0x378, BIT(8), 8, 1, 0, NULL, false),
+ [REG_SCALE] = REG_BIT_INIT(BASE_ANA, 0xffff, GENMASK(10, 9), 9, -1, -1, NULL, false),
+ [REG_CAL_EN] = REG_BIT_INIT(BASE_ANA, 0x4, BIT(12), 12, 1, 0, NULL, false),
+ [REG_ISEN0] = REG_BIT_INIT(BASE_GLB, 0x384, BIT(0), 0, 1, 0, NULL, true),
+ [REG_ISEN1] = REG_BIT_INIT(BASE_GLB, 0x384, BIT(13), 13, 1, 0, NULL, false),
+ [REG_ISEN2] = REG_BIT_INIT(BASE_GLB, 0x384, GENMASK(11, 9), 9, -1, -1, get_isen, false),
+ [REG_ISEN3] = REG_BIT_INIT(BASE_ANA, 0xB0, BIT(0), 0, 1, 0, NULL, false),
+};
+
+static const struct iio_chan_spec sprd_channels[] = {
+ SPRD_ADC_CHANNEL(0, BIT(IIO_CHAN_INFO_PROCESSED)),
+ SPRD_ADC_CHANNEL(1, BIT(IIO_CHAN_INFO_PROCESSED)),
+ SPRD_ADC_CHANNEL(2, BIT(IIO_CHAN_INFO_PROCESSED)),
+ SPRD_ADC_CHANNEL(3, BIT(IIO_CHAN_INFO_PROCESSED)),
+ SPRD_ADC_CHANNEL(4, BIT(IIO_CHAN_INFO_PROCESSED)),
+ SPRD_ADC_CHANNEL(5, BIT(IIO_CHAN_INFO_PROCESSED)),
+ SPRD_ADC_CHANNEL(6, BIT(IIO_CHAN_INFO_PROCESSED)),
+ SPRD_ADC_CHANNEL(7, BIT(IIO_CHAN_INFO_PROCESSED)),
+ SPRD_ADC_CHANNEL(8, BIT(IIO_CHAN_INFO_PROCESSED)),
+ SPRD_ADC_CHANNEL(9, BIT(IIO_CHAN_INFO_PROCESSED)),
+ SPRD_ADC_CHANNEL(10, BIT(IIO_CHAN_INFO_PROCESSED)),
+ SPRD_ADC_CHANNEL(11, BIT(IIO_CHAN_INFO_PROCESSED)),
+ SPRD_ADC_CHANNEL(12, BIT(IIO_CHAN_INFO_PROCESSED)),
+ SPRD_ADC_CHANNEL(13, BIT(IIO_CHAN_INFO_PROCESSED)),
+ SPRD_ADC_CHANNEL(14, BIT(IIO_CHAN_INFO_PROCESSED)),
+ SPRD_ADC_CHANNEL(15, BIT(IIO_CHAN_INFO_PROCESSED)),
+ SPRD_ADC_CHANNEL(16, BIT(IIO_CHAN_INFO_PROCESSED)),
+ SPRD_ADC_CHANNEL(17, BIT(IIO_CHAN_INFO_PROCESSED)),
+ SPRD_ADC_CHANNEL(18, BIT(IIO_CHAN_INFO_PROCESSED)),
+ SPRD_ADC_CHANNEL(19, BIT(IIO_CHAN_INFO_PROCESSED)),
+ SPRD_ADC_CHANNEL(20, BIT(IIO_CHAN_INFO_RAW)),
+ SPRD_ADC_CHANNEL(21, BIT(IIO_CHAN_INFO_PROCESSED)),
+ SPRD_ADC_CHANNEL(22, BIT(IIO_CHAN_INFO_PROCESSED)),
+ SPRD_ADC_CHANNEL(23, BIT(IIO_CHAN_INFO_PROCESSED)),
+ SPRD_ADC_CHANNEL(24, BIT(IIO_CHAN_INFO_PROCESSED)),
+ SPRD_ADC_CHANNEL(25, BIT(IIO_CHAN_INFO_PROCESSED)),
+ SPRD_ADC_CHANNEL(26, BIT(IIO_CHAN_INFO_PROCESSED)),
+ SPRD_ADC_CHANNEL(27, BIT(IIO_CHAN_INFO_PROCESSED)),
+ SPRD_ADC_CHANNEL(28, BIT(IIO_CHAN_INFO_PROCESSED)),
+ SPRD_ADC_CHANNEL(29, BIT(IIO_CHAN_INFO_PROCESSED)),
+ SPRD_ADC_CHANNEL(30, BIT(IIO_CHAN_INFO_PROCESSED)),
+ SPRD_ADC_CHANNEL(31, BIT(IIO_CHAN_INFO_PROCESSED)),
+};
+
+static void sprd_adc_calib_with_two_cell(struct sprd_adc_linear_graph *graph)
+{
+ int adc_calib_data0 = graph->cell_value[0];
+ int adc_calib_data1 = graph->cell_value[1];
+ int adc0_calib, adc1_calib;
+
+ pr_debug("calib before: adc0: %d:, adc1:%d, calib_data0: %d, calib_data1: %d\n",
+ graph->adc0, graph->adc1, adc_calib_data0, adc_calib_data1);
+
+ adc0_calib = (adc_calib_data0 & 0xfff0) >> 4;
+ adc1_calib = (adc_calib_data1 & 0xfff0) >> 4;
+
+ if (adc0_calib > 0 && adc1_calib > 0) {
+ graph->adc0 = adc0_calib;
+ graph->adc1 = adc1_calib;
+ }
+
+ pr_debug("calib aft: adc0: %d:, adc1:%d, calib_data0: %d, calib_data1: %d\n",
+ graph->adc0, graph->adc1, adc_calib_data0, adc_calib_data1);
+}
+
+static const struct calib_info *sprd_adc_calib_info_get(struct sprd_adc_data *data, int ch)
+{
+ int calib_index, calib_small = 1;
+ const struct calib_info *calib_info;
+
+ for (calib_index = 0; calib_index < GRAPH_MAX; calib_index++) {
+ calib_info = &data->var_data->calib_infos[calib_index];
+ if (calib_info->inited != SPRD_ADC_INIT_MAGIC)
+ continue;
+
+ if (calib_info->graph == GRAPH_SMALL)
+ calib_small = calib_index;
+
+ if (calib_info->channel == ch)
+ return calib_info;
+ }
+
+ return &data->var_data->calib_infos[calib_small];
+}
+
+static void sprd_adc_aux_ratio_init(struct sprd_adc_data *data, int ch)
+{
+ u64 final_ratio;
+ int scale, *aux_ratio_ch, aux_ratio_tmp[SPRD_ADC_SCALE_MAX];
+ const struct calib_info *calib_match = sprd_adc_calib_info_get(data, ch);
+ const int *aux_ratio_calib;
+ struct u32_fract c_fract, aux_fract;
+
+ data->ch_data[ch].graph = calib_match->graph;
+ aux_ratio_ch = data->ch_data[ch].ch_aux_ratio;
+
+ aux_ratio_calib = &data->var_data->aux_ratio_comm[0];
+ memcpy(&aux_ratio_tmp[0], aux_ratio_calib, sizeof(int) * SPRD_ADC_SCALE_MAX);
+
+ ratio_to_u32_fract(aux_ratio_calib[calib_match->scale], &c_fract);
+ for (scale = 0; scale < SPRD_ADC_SCALE_MAX; scale++) {
+
+ if (ch == calib_match->channel && scale == calib_match->scale) {
+ aux_ratio_ch[scale] = RATIO_DEF;
+ continue;
+ }
+
+ if (aux_ratio_tmp[scale] == R_INVALID || aux_ratio_calib[scale] == R_INVALID) {
+ aux_ratio_ch[scale] = RATIO_DEF;
+ continue;
+ }
+
+ ratio_to_u32_fract(aux_ratio_tmp[scale], &aux_fract);
+ if (scale > calib_match->scale) {
+ final_ratio =
+ div_u64((u64)aux_fract.denominator * c_fract.numerator * 1000,
+ c_fract.denominator * aux_fract.numerator);
+ aux_ratio_ch[scale] = RATIO(1000, (int)final_ratio);
+ } else {
+ final_ratio =
+ div_u64((u64)c_fract.denominator * aux_fract.numerator * 1000,
+ aux_fract.denominator * c_fract.numerator);
+ aux_ratio_ch[scale] = RATIO((int)final_ratio, 1000);
+ }
+ }
+}
+
+static inline void sprd_adc_ch_data_show(struct sprd_adc_data *data, int ch)
+{
+ struct sprd_adc_channel_data *ch_data = &data->ch_data[ch];
+ struct u32_fract ip_fract, aux_fract0, aux_fract1, aux_fract2, aux_fract3;
+
+ ratio_to_u32_fract(ch_data->ip_ratio, &ip_fract);
+ ratio_to_u32_fract(ch_data->ch_aux_ratio[0], &aux_fract0);
+ ratio_to_u32_fract(ch_data->ch_aux_ratio[1], &aux_fract1);
+ ratio_to_u32_fract(ch_data->ch_aux_ratio[2], &aux_fract2);
+ ratio_to_u32_fract(ch_data->ch_aux_ratio[3], &aux_fract3);
+ dev_dbg(data->dev, CH_DATA_FMT,
+ ch, ch_data->scale, ch_data->graph, ch_data->isen_info, ch_data->filter_info,
+ ip_fract.numerator, ip_fract.denominator,
+ aux_fract0.numerator, aux_fract0.denominator,
+ aux_fract1.numerator, aux_fract1.denominator,
+ aux_fract2.numerator, aux_fract2.denominator,
+ aux_fract3.numerator, aux_fract3.denominator);
+}
+
+static void sprd_adc_ch_data_merge(struct sprd_adc_data *data, struct sprd_adc_channel_data *d_diff,
+ struct sprd_adc_channel_data *d_def)
+{
+ struct sprd_adc_channel_data *ch_data;
+ int ch;
+
+ for (ch = 0; ch < SPRD_ADC_CHANNEL_MAX; ch++) {
+ ch_data = &data->ch_data[ch];
+ *ch_data = ((d_diff[ch].inited == SPRD_ADC_INIT_MAGIC) ? d_diff[ch] : *d_def);
+ }
+
+ for (ch = 0; ch < SPRD_ADC_CHANNEL_MAX; ch++) {
+ sprd_adc_aux_ratio_init(data, ch);
+ sprd_adc_ch_data_show(data, ch);
+ }
+}
+
+static int sprd_adc_graphs_calibrate(struct sprd_adc_data *data)
+{
+ int i, j, ret;
+ struct sprd_adc_graphs *graphs;
+ struct sprd_adc_linear_graph *linear_graph;
+ u16 cell_value = 0;
+
+ if (data->var_data->graph_index >= SPRD_ADC_GRAPH_TYPE_MAX)
+ return -EINVAL;
+
+ graphs = &sprd_adc_graphs_array[data->var_data->graph_index];
+ for (i = 0; i < GRAPH_MAX; i++) {
+
+ if (graphs->adc_graphs[i].inited != SPRD_ADC_INIT_MAGIC)
+ continue;
+
+ linear_graph = &graphs->adc_graphs[i];
+ for (j = 0; linear_graph->cell_names[j] != NULL; j++) {
+ ret = nvmem_cell_read_u16(data->dev, linear_graph->cell_names[j],
+ &cell_value);
+ if (ret) {
+ dev_err(data->dev, "calibrate err! name: %s: ret %d\n",
+ linear_graph->cell_names[j], ret);
+ return ret;
+ }
+ linear_graph->cell_value[j] = cell_value;
+ }
+ }
+
+ for (i = 0; i < GRAPH_MAX; i++) {
+
+ if (graphs->adc_graphs[i].inited != SPRD_ADC_INIT_MAGIC)
+ continue;
+
+ linear_graph = &graphs->adc_graphs[i];
+ linear_graph->calibrate(linear_graph);
+ }
+
+ return 0;
+}
+
+static void ump9620_ch_data_init(struct sprd_adc_data *data)
+{
+ struct sprd_adc_channel_data ch_data_def = CH_DATA_INIT(SCALE_00, 0, 0, RATIO_DEF);
+ struct sprd_adc_channel_data ch_data[SPRD_ADC_CHANNEL_MAX] = {
+ [0] = CH_DATA_INIT(SCALE_01, 0, 0, RATIO_DEF),
+ [5] = CH_DATA_INIT(SCALE_00, 0x1, 0x9, RATIO_DEF),
+ [6] = CH_DATA_INIT(SCALE_00, 0x1, 0x9, RATIO_DEF),
+ [7] = CH_DATA_INIT(SCALE_10, 0, 0, RATIO_DEF),
+ [9] = CH_DATA_INIT(SCALE_10, 0, 0, RATIO_DEF),
+ [10] = CH_DATA_INIT(SCALE_11, 0, 0, RATIO_DEF),
+ [11] = CH_DATA_INIT(SCALE_00, 0, 0, RATIO_DEF),
+ [13] = CH_DATA_INIT(SCALE_01, 0, 0, RATIO_DEF),
+ [14] = CH_DATA_INIT(SCALE_00, 0, 0, RATIO(68, 900)),
+ [15] = CH_DATA_INIT(SCALE_00, 0, 0, RATIO(1, 3)),
+ [19] = CH_DATA_INIT(SCALE_11, 0, 0, RATIO_DEF),
+ [21] = CH_DATA_INIT(SCALE_00, 0, 0, RATIO(3, 8)),
+ [22] = CH_DATA_INIT(SCALE_00, 0, 0, RATIO(3, 8)),
+ [23] = CH_DATA_INIT(SCALE_00, 0, 0, RATIO(3, 8)),
+ [30] = CH_DATA_INIT(SCALE_11, 0, 0, RATIO_DEF),
+ [31] = CH_DATA_INIT(SCALE_11, 0, 0, RATIO_DEF),
+ };
+
+ sprd_adc_ch_data_merge(data, ch_data, &ch_data_def);
+}
+
+static void sprd_adc_regs_dump(struct sprd_adc_data *data, int ch, int scale, const char *tag)
+{
+ u32 mod_en = 0, clk_en = 0, int_ctl = 0, int_raw = 0, adc_ctl = 0;
+ u32 ch_cfg = 0, pm_clk_reg = 0, xtl_ctl = 0;
+ int ret;
+
+ ret = regmap_read(data->regmap, GET_REG_ADDR(data, REG_MODULE_EN), &mod_en);
+ ret |= regmap_read(data->regmap, GET_REG_ADDR(data, REG_CLK_EN), &clk_en);
+ ret |= regmap_read(data->regmap, GET_REG_ADDR(data, REG_XTL_CTRL), &xtl_ctl);
+ ret |= regmap_read(data->regmap, data->base + SPRD_ADC_INT_CLR, &int_ctl);
+ ret |= regmap_read(data->regmap, data->base + SPRD_ADC_INT_RAW, &int_raw);
+ ret |= regmap_read(data->regmap, data->base + SPRD_ADC_CTL, &adc_ctl);
+ ret |= regmap_read(data->regmap, data->base + SPRD_ADC_CH_CFG, &ch_cfg);
+ if (data->pm_data.clk_regmap)
+ ret |= regmap_read(data->pm_data.clk_regmap, data->pm_data.clk_reg, &pm_clk_reg);
+
+ if (ret) {
+ dev_err(data->dev, "regs_dump err: ret %d\n", ret);
+ return;
+ }
+
+ dev_err(data->dev, "[%s]: ch %d, sl %d, clk_en 0x%x, xtl_ctl 0x%x, pm_clk 0x%x\n",
+ tag, ch, scale, clk_en, xtl_ctl, pm_clk_reg);
+ dev_err(data->dev, "mod_en 0x%x, int_ctl 0x%x, int_raw 0x%x, adc_ctl 0x%x, ch_cfg 0x%x\n",
+ mod_en, int_ctl, int_raw, adc_ctl, ch_cfg);
+}
+
+static u32 get_isen(void *pri, int ch, bool enable)
+{
+ struct sprd_adc_data *data = (struct sprd_adc_data *)pri;
+
+ if (!enable)
+ return 0;
+
+ return (data->ch_data[ch].isen_info >> 1);
+}
+
+static int sprd_adc_reg_cfg(struct sprd_adc_data *data, int ch, int index, bool set)
+{
+ int ret;
+ u32 reg_addr, val, read_val = 0;
+ const struct reg_bit *const reg_inf = &data->var_data->reg_list[index];
+ bool set_act = ((set && !reg_inf->reverse) || (!set && reg_inf->reverse));
+
+ if (data->var_data->reg_list[index].inited != SPRD_ADC_INIT_MAGIC)
+ return 0;
+
+ reg_addr = GET_REG_ADDR(data, index);
+ if (!reg_inf->get_val)
+ val = (set_act ? reg_inf->val_set : reg_inf->val_clr);
+ else
+ val = reg_inf->get_val(data, ch, set_act);
+ val = ((val << reg_inf->offset) & reg_inf->mask);
+ ret = regmap_update_bits(data->regmap, reg_addr, reg_inf->mask, val);
+ ret |= regmap_read(data->regmap, reg_addr, &read_val);
+ if (ret) {
+ dev_err(data->dev, "reg_cfg err: reg[%d], ret %d\n", reg_addr, ret);
+ return ret;
+ }
+
+ dev_dbg(data->dev, "reg_cfg[%d %d]: reg 0x%x, mask: 0x%x, val: 0x%x, read_val: 0x%x\n",
+ set, reg_inf->reverse, reg_addr, reg_inf->mask, val, read_val);
+
+ return 0;
+}
+
+static void sprd_adc_regs_set_order(struct sprd_adc_data *data, int ch, int start, int end)
+{
+ int i;
+
+ for (i = start + 1; i < end; i++)
+ sprd_adc_reg_cfg(data, ch, i, true);
+}
+
+static void sprd_adc_regs_clr_order_reverse(struct sprd_adc_data *data, int ch, int start, int end)
+{
+ int i;
+
+ for (i = end - 1; i > start; i--)
+ sprd_adc_reg_cfg(data, ch, i, false);
+}
+
+static int sprd_adc_isen_enable(struct sprd_adc_data *data, int channel)
+{
+ bool isen_support = data->ch_data[channel].isen_info & 0x1;
+
+ if (!isen_support)
+ return 0;
+
+ sprd_adc_regs_set_order(data, channel, REG_ISEN_ST, REG_ISEN_END);
+ usleep_range(500, 1000);
+
+ return 0;
+}
+
+static int sprd_adc_isen_disable(struct sprd_adc_data *data, int channel)
+{
+ bool isen_support = data->ch_data[channel].isen_info & 0x1;
+
+ if (!isen_support)
+ return 0;
+
+ sprd_adc_regs_clr_order_reverse(data, channel, REG_ISEN_ST, REG_ISEN_END);
+ usleep_range(500, 1000);
+
+ return 0;
+}
+
+static void sprd_adc_config_fixed(struct sprd_adc_data *data)
+{
+ sprd_adc_regs_set_order(data, -1, REG_CFG_FIXED_ST, REG_CFG_FIXED_END);
+}
+
+static int sprd_adc_data_average(int *vals, int len)
+{
+ int i, sum = 0;
+
+ for (i = 0; i < len; i++)
+ sum += vals[i];
+ return DIV_ROUND_CLOSEST(sum, len);
+}
+
+static int compare_val(const void *a, const void *b)
+{
+ return *(int *)a - *(int *)b;
+}
+
+static int sprd_adc_get_val_with_sw_filter(struct sprd_adc_data *data, int ch)
+{
+ int data_buf[ADC_MESURE_NUMBER_SW] = { 0 }, ret = 0, num = ADC_MESURE_NUMBER_SW;
+ int count, result;
+ unsigned int rawdata;
+
+ for (count = 0; count < ADC_MESURE_NUMBER_SW; count++) {
+ ret |= regmap_read(data->regmap, data->base + SPRD_ADC_DATA, &rawdata);
+ rawdata &= SPRD_ADC_DATA_MASK;
+ data_buf[count] = rawdata;
+ udelay(10);
+ if (ret)
+ return -EINVAL;
+ }
+
+ sort(data_buf, ADC_MESURE_NUMBER_SW, sizeof(int), compare_val, NULL);
+ result = sprd_adc_data_average(&data_buf[num / 5], (num - num * 2 / 5));
+
+ for (count = 0; count < ADC_MESURE_NUMBER_SW; count++)
+ dev_dbg(data->dev, "data_buf[%d]=%d ", count, data_buf[count]);
+ dev_dbg(data->dev, "result=%d\n", result);
+
+ return result;
+}
+
+static int sprd_adc_enable(struct sprd_adc_data *data, int channel)
+{
+ int ret = 0;
+ u32 reg_read = 0;
+
+ if (data->pm_data.clk_regmap) {
+ ret = regmap_update_bits(data->pm_data.clk_regmap, data->pm_data.clk_reg,
+ data->pm_data.clk_reg_mask,
+ data->pm_data.clk_reg_mask);
+ ret |= regmap_read(data->pm_data.clk_regmap, data->pm_data.clk_reg, ®_read);
+ if (ret) {
+ dev_err(data->dev, "failed to enable clk26m, channel %d\n", channel);
+ return ret;
+ }
+ dev_dbg(data->dev, "enable clk26m: ch %d, reg_read 0x%x\n", channel, reg_read);
+ }
+
+ ret = sprd_adc_isen_enable(data, channel);
+ if (ret) {
+ dev_err(data->dev, "failed to enable isen\n");
+ return ret;
+ }
+
+ ret = regmap_update_bits(data->regmap, data->base + SPRD_ADC_CTL,
+ SPRD_ADC_EN, SPRD_ADC_EN);
+ if (ret) {
+ dev_err(data->dev, "failed to set SPRD_ADC_EN\n");
+ return ret;
+ }
+
+ return ret;
+}
+
+static int sprd_adc_disable(struct sprd_adc_data *data, int channel)
+{
+ int ret = 0;
+ u32 reg_read = 0;
+
+ ret = regmap_update_bits(data->regmap, data->base + SPRD_ADC_CTL, SPRD_ADC_EN, 0);
+ if (ret) {
+ dev_err(data->dev, "failed to reset SPRD_ADC_EN\n");
+ return ret;
+ }
+
+ ret = sprd_adc_isen_disable(data, channel);
+ if (ret) {
+ dev_err(data->dev, "failed to disable isen\n");
+ return ret;
+ }
+
+ if (data->pm_data.clk_regmap) {
+ ret = regmap_update_bits(data->pm_data.clk_regmap, data->pm_data.clk_reg,
+ data->pm_data.clk_reg_mask, 0);
+ ret |= regmap_read(data->pm_data.clk_regmap, data->pm_data.clk_reg, ®_read);
+ if (ret) {
+ dev_err(data->dev, "failed to disable clk26m, channel %d\n", channel);
+ return ret;
+ }
+ dev_dbg(data->dev, "disable clk26m: ch %d, reg_read 0x%x\n", channel, reg_read);
+ }
+
+ return ret;
+}
+
+static int sprd_adc_read(struct sprd_adc_data *data, int channel, int scale, int *val)
+{
+ int ret = 0, sample_num_sw;
+ u32 rawdata = 0, tmp, status, scale_shift, scale_mask;
+ bool filter_sw = data->ch_data[channel].filter_info & 0x1;
+ int sample_num_hw = data->ch_data[channel].filter_info >> 1;
+
+ if (data->pm_data.dev_suspended) {
+ dev_err(data->dev, "adc_exp: adc bas been suspended, ignore.\n");
+ return -EBUSY;
+ }
+
+ dev_dbg(data->dev, "ch_data[%d]: scale %d, graph %d, filter_info 0x%x, isen_info 0x%x\n",
+ channel, data->ch_data[channel].scale, data->ch_data[channel].graph,
+ data->ch_data[channel].filter_info, data->ch_data[channel].isen_info);
+
+ ret = hwspin_lock_timeout_raw(data->hwlock, SPRD_ADC_HWLOCK_TIMEOUT);
+ if (ret) {
+ dev_err(data->dev, "timeout to get the hwspinlock\n");
+ return ret;
+ }
+
+ ret = sprd_adc_enable(data, channel);
+ if (ret)
+ goto disable_adc;
+
+ ret = regmap_update_bits(data->regmap, data->base + SPRD_ADC_INT_CLR,
+ SPRD_ADC_IRQ_CLR, SPRD_ADC_IRQ_CLR);
+ if (ret)
+ goto disable_adc;
+
+ /* Configure the channel id and scale */
+ scale_shift = data->var_data->reg_list[REG_SCALE].offset;
+ scale_mask = data->var_data->reg_list[REG_SCALE].mask;
+ tmp = (scale << scale_shift) & scale_mask;
+ tmp |= channel & SPRD_ADC_CHN_ID_MASK;
+ ret = regmap_update_bits(data->regmap, data->base + SPRD_ADC_CH_CFG,
+ SPRD_ADC_CHN_ID_MASK | scale_mask, tmp);
+ if (ret)
+ goto disable_adc;
+
+ /* Select 12bit conversion mode, and only sample 1 time */
+ tmp = SPRD_ADC_12BIT_MODE;
+ sample_num_sw = (filter_sw ? ADC_MESURE_NUMBER_SW - 1 : 0);
+ sample_num_hw = ((sample_num_hw > 0) ? sample_num_hw : ADC_MESURE_NUMBER_HW_DEF);
+ tmp |= ((unsigned long)sample_num_sw << SPRD_ADC_RUN_NUM_SHIFT) & SPRD_ADC_RUN_NUM_MASK;
+ tmp |= ((unsigned long)sample_num_hw << SPRD_ADC_AVERAGE_SHIFT) & SPRD_ADC_AVERAGE_MASK;
+ ret = regmap_update_bits(data->regmap, data->base + SPRD_ADC_CTL,
+ SPRD_ADC_RUN_NUM_MASK | SPRD_ADC_12BIT_MODE |
+ SPRD_ADC_AVERAGE_MASK, tmp);
+ if (ret)
+ goto disable_adc;
+
+ ret = regmap_update_bits(data->regmap, data->base + SPRD_ADC_CTL,
+ SPRD_ADC_CHN_RUN, SPRD_ADC_CHN_RUN);
+ if (ret)
+ goto disable_adc;
+
+ ret = regmap_read_poll_timeout(data->regmap, data->base + SPRD_ADC_INT_RAW, status,
+ (status & SPRD_ADC_IRQ_RAW), SPRD_ADC_POLL_RAW_STATUS,
+ SPRD_ADC_RDY_TIMEOUT);
+ if (ret) {
+ dev_err(data->dev, "read adc timeout 0x%x\n", status);
+ sprd_adc_regs_dump(data, channel, scale, "t_bef");
+ sprd_adc_hw_enable(data);
+ sprd_adc_soft_rst(data);
+ sprd_adc_regs_dump(data, channel, scale, "t_aft");
+ goto disable_adc;
+ }
+
+ if (filter_sw) {
+ rawdata = sprd_adc_get_val_with_sw_filter(data, channel);
+ } else {
+ ret = regmap_read(data->regmap, data->base + SPRD_ADC_DATA, &rawdata);
+ rawdata &= SPRD_ADC_DATA_MASK;
+ }
+disable_adc:
+ ret = sprd_adc_disable(data, channel);
+
+ hwspin_unlock_raw(data->hwlock);
+
+ if (!ret)
+ *val = rawdata;
+
+ return ret;
+}
+
+static int sprd_adc_calculate_volt_by_graph(struct sprd_adc_data *data, int channel,
+ int scale, int raw_adc)
+{
+ int tmp;
+ struct sprd_adc_graphs *graphs = &sprd_adc_graphs_array[data->var_data->graph_index];
+ int graph_offset = data->ch_data[channel].graph;
+ struct sprd_adc_linear_graph *linear_graph = &graphs->adc_graphs[graph_offset];
+
+ tmp = (linear_graph->volt0 - linear_graph->volt1) * (raw_adc - linear_graph->adc1);
+ tmp /= (linear_graph->adc0 - linear_graph->adc1);
+ tmp += linear_graph->volt1;
+ tmp = (tmp < 0 ? 0 : tmp);
+
+ dev_dbg(data->dev, "by_graph_c%d: v0 %d a0 %d, v1 %d a1 %d, raw_adc 0x%x, vol_graph %d\n",
+ channel, linear_graph->volt0, linear_graph->adc0, linear_graph->volt1,
+ linear_graph->adc1, raw_adc, tmp);
+
+ return tmp;
+}
+
+static int sprd_adc_calculate_volt_by_ratio(struct sprd_adc_data *data, int channel,
+ int scale, int vol_graph)
+{
+ struct u32_fract ip_fract, aux_fract;
+ int pmic_type = data->var_data->pmic_type;
+ u32 vol_final = vol_graph;
+
+ ratio_to_u32_fract(data->ch_data[channel].ip_ratio, &ip_fract);
+ vol_final = DIV_ROUND_CLOSEST(vol_final * ip_fract.denominator, ip_fract.numerator);
+
+ ratio_to_u32_fract(data->ch_data[channel].ch_aux_ratio[scale], &aux_fract);
+ vol_final = DIV_ROUND_CLOSEST(vol_final * aux_fract.denominator, aux_fract.numerator);
+
+ dev_dbg(data->dev, "by_ratio_c%d: id %d, scale %d, ip_r[%d/%d], aux_r[%d/%d], vol_f %d\n",
+ channel, pmic_type, scale, ip_fract.numerator, ip_fract.denominator,
+ aux_fract.numerator, aux_fract.denominator, vol_final);
+
+ return vol_final;
+}
+
+static int sprd_adc_read_processed(struct sprd_adc_data *data, int channel, int scale, int *val)
+{
+ int ret, raw_adc, vol_graph;
+
+ ret = sprd_adc_read(data, channel, scale, &raw_adc);
+
+ if (ret)
+ return ret;
+
+ vol_graph = sprd_adc_calculate_volt_by_graph(data, channel, scale, raw_adc);
+ *val = sprd_adc_calculate_volt_by_ratio(data, channel, scale, vol_graph);
+
+ return 0;
+}
+
+static int sprd_adc_ch_data_encode(struct sprd_adc_data *data, int ch)
+{
+ int scale = data->ch_data[ch].scale & 0xff;
+ int isen_info = data->ch_data[ch].isen_info & 0xff;
+ int filter_info = data->ch_data[ch].filter_info & 0xff;
+
+ return (scale | (filter_info << 8) | (isen_info << 16));
+}
+
+static void sprd_adc_ch_data_decode(struct sprd_adc_data *data, int ch, int val)
+{
+ int scale_override, filter_override, isen_override;
+
+ scale_override = (val & 0xff);
+ filter_override = ((val >> 8) & 0xff);
+ isen_override = ((val >> 16) & 0xff);
+
+ if (scale_override < SPRD_ADC_SCALE_MAX && scale_override != data->ch_data[ch].scale)
+ data->ch_data[ch].scale = scale_override;
+
+ if (data->ch_data[ch].filter_info != filter_override)
+ data->ch_data[ch].filter_info = filter_override;
+
+ if (data->ch_data[ch].isen_info != isen_override)
+ data->ch_data[ch].isen_info = isen_override;
+}
+
+static int sprd_adc_read_raw(struct iio_dev *indio_dev, struct iio_chan_spec const *chan,
+ int *val, int *val2, long mask)
+{
+ struct sprd_adc_data *data = iio_priv(indio_dev);
+ int scale = data->ch_data[chan->channel].scale;
+ int ret, tmp;
+
+ switch (mask) {
+ case IIO_CHAN_INFO_RAW:
+ mutex_lock(&data->mutex);
+ ret = sprd_adc_read(data, chan->channel, scale, &tmp);
+ mutex_unlock(&data->mutex);
+
+ if (ret)
+ return ret;
+
+ *val = tmp;
+ return IIO_VAL_INT;
+
+ case IIO_CHAN_INFO_PROCESSED:
+ mutex_lock(&data->mutex);
+ ret = sprd_adc_read_processed(data, chan->channel, scale, &tmp);
+ mutex_unlock(&data->mutex);
+
+ if (ret)
+ return ret;
+
+ *val = tmp;
+ return IIO_VAL_INT;
+
+ case IIO_CHAN_INFO_SCALE:
+ *val = sprd_adc_ch_data_encode(data, chan->channel);
+ return IIO_VAL_INT;
+
+ default:
+ return -EINVAL;
+ }
+}
+
+static int sprd_adc_write_raw(struct iio_dev *indio_dev, struct iio_chan_spec const *chan,
+ int val, int val2, long mask)
+{
+ struct sprd_adc_data *data = iio_priv(indio_dev);
+
+ switch (mask) {
+ case IIO_CHAN_INFO_SCALE:
+ sprd_adc_ch_data_decode(data, chan->channel, val);
+ return 0;
+
+ default:
+ return -EINVAL;
+ }
+}
+
+static int sprd_adc_soft_rst(struct sprd_adc_data *data)
+{
+ int ret;
+ u32 reg_addr, mask;
+
+ reg_addr = GET_REG_ADDR(data, REG_SOFT_RST);
+ mask = data->var_data->reg_list[REG_SOFT_RST].mask;
+ ret = regmap_update_bits(data->regmap, reg_addr, mask, mask);
+ if (ret)
+ return ret;
+
+ udelay(10);
+
+ reg_addr = GET_REG_ADDR(data, REG_SOFT_RST);
+ mask = data->var_data->reg_list[REG_SOFT_RST].mask;
+ ret = regmap_update_bits(data->regmap, reg_addr, mask, 0);
+ if (ret)
+ return ret;
+
+ sprd_adc_config_fixed(data);
+
+ return 0;
+}
+static int sprd_adc_hw_enable(struct sprd_adc_data *data)
+{
+ int ret;
+ u32 reg_addr, mask;
+
+ reg_addr = GET_REG_ADDR(data, REG_XTL_CTRL);
+ mask = data->var_data->reg_list[REG_XTL_CTRL].mask;
+ ret = regmap_update_bits(data->regmap, reg_addr, mask, mask);
+ if (ret)
+ return ret;
+
+ reg_addr = GET_REG_ADDR(data, REG_MODULE_EN);
+ mask = data->var_data->reg_list[REG_MODULE_EN].mask;
+ ret = regmap_update_bits(data->regmap, reg_addr, mask, mask);
+ if (ret)
+ return ret;
+
+ /* Enable ADC work clock */
+ reg_addr = GET_REG_ADDR(data, REG_CLK_EN);
+ mask = data->var_data->reg_list[REG_CLK_EN].mask;
+ ret = regmap_update_bits(data->regmap, reg_addr, mask, mask);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static void sprd_adc_hw_disable(void *_data)
+{
+ struct sprd_adc_data *data = _data;
+ u32 reg_addr, mask;
+
+ /* Disable ADC work clock and controller clock */
+ reg_addr = GET_REG_ADDR(data, REG_CLK_EN);
+ mask = data->var_data->reg_list[REG_CLK_EN].mask;
+ regmap_update_bits(data->regmap, reg_addr, mask, 0);
+
+ reg_addr = GET_REG_ADDR(data, REG_MODULE_EN);
+ mask = data->var_data->reg_list[REG_MODULE_EN].mask;
+ regmap_update_bits(data->regmap, reg_addr, mask, 0);
+}
+
+static void sprd_adc_free_lock(void *_data)
+{
+ struct sprd_adc_data *sprd_data = _data;
+
+ hwspin_lock_free(sprd_data->hwlock);
+ mutex_destroy(&sprd_data->mutex);
+}
+
+static int sprd_adc_ch_data_init(struct sprd_adc_data *data)
+{
+ struct device_node *np = data->dev->of_node;
+ int size, ret, ch, ch_data_val, i;
+ u32 *ch_data_override;
+
+ data->var_data->ch_data_init(data);
+
+ size = of_property_count_elems_of_size(np, "ch_data_override", sizeof(u32));
+ if (size <= 0)
+ return 0;
+
+ if (size % 2) {
+ dev_err(data->dev, "Pair of ch data err!\n");
+ return -EINVAL;
+ }
+
+ ch_data_override = kcalloc(size, sizeof(u32), GFP_KERNEL);
+ if (!ch_data_override)
+ return -ENOMEM;
+
+ ret = of_property_read_u32_array(np, "ch_data_override", ch_data_override, size);
+ if (ret < 0) {
+ dev_err(data->dev, "Failed to read ch data from dt: %d\n", ret);
+ kfree(ch_data_override);
+ return ret;
+ }
+
+ for (i = 0; i < size; i += 2) {
+ ch = ch_data_override[i];
+ ch_data_val = ch_data_override[i+1];
+ sprd_adc_ch_data_decode(data, ch, ch_data_val);
+ sprd_adc_ch_data_show(data, ch);
+ }
+
+ kfree(ch_data_override);
+
+ return 0;
+}
+
+static int sprd_adc_pm_init(struct sprd_adc_data *data)
+{
+ unsigned int pm_args[2];
+ u32 reg, mask;
+ struct device_node *np = data->dev->of_node;
+
+ data->pm_data.clk_regmap =
+ syscon_regmap_lookup_by_phandle_args(np, "sprd_adc_pm_reg", 2, pm_args);
+ if (!IS_ERR_OR_NULL(data->pm_data.clk_regmap)) {
+ data->pm_data.clk_reg = reg = pm_args[0];
+ data->pm_data.clk_reg_mask = mask = pm_args[1];
+ } else {
+ data->pm_data.clk_regmap = NULL;
+ }
+
+ data->pm_data.dev_suspended = false;
+
+ return 0;
+}
+
+static const struct iio_info sprd_info = {
+ .read_raw = &sprd_adc_read_raw,
+ .write_raw = &sprd_adc_write_raw,
+};
+
+static int sprd_adc_probe(struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ struct sprd_adc_data *sprd_data;
+ const struct sprd_adc_variant_data *pdata;
+ struct iio_dev *indio_dev;
+ int ret;
+
+ pdata = of_device_get_match_data(&pdev->dev);
+ if (!pdata) {
+ dev_err(&pdev->dev, "No matching driver data found\n");
+ return -EINVAL;
+ }
+
+ indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*sprd_data));
+ if (!indio_dev)
+ return -ENOMEM;
+
+ sprd_data = iio_priv(indio_dev);
+
+ sprd_data->regmap = dev_get_regmap(pdev->dev.parent, NULL);
+ if (!sprd_data->regmap) {
+ dev_err(&pdev->dev, "failed to get ADC regmap\n");
+ return -ENODEV;
+ }
+
+ ret = of_property_read_u32(np, "reg", &sprd_data->base);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to get ADC base address\n");
+ return ret;
+ }
+
+ sprd_data->irq = platform_get_irq(pdev, 0);
+ if (sprd_data->irq < 0) {
+ dev_err(&pdev->dev, "failed to get ADC irq number\n");
+ return sprd_data->irq;
+ }
+
+ ret = of_hwspin_lock_get_id(np, 0);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "failed to get hwspinlock id\n");
+ return ret;
+ }
+
+ mutex_init(&sprd_data->mutex);
+ sprd_data->hwlock = hwspin_lock_request_specific(ret);
+ if (!sprd_data->hwlock) {
+ dev_err(&pdev->dev, "failed to request hwspinlock\n");
+ return -ENXIO;
+ }
+
+ ret = devm_add_action(&pdev->dev, sprd_adc_free_lock, sprd_data);
+ if (ret) {
+ sprd_adc_free_lock(sprd_data);
+ dev_err(&pdev->dev, "failed to add free lock action\n");
+ return ret;
+ }
+
+ sprd_data->dev = &pdev->dev;
+ sprd_data->var_data = pdata;
+ sprd_data->indio_dev = indio_dev;
+
+ /* ADC channel scales calibration from nvmem device */
+ ret = sprd_adc_graphs_calibrate(sprd_data);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to calib graphs from nvmem\n");
+ return ret;
+ }
+
+ ret = sprd_adc_pm_init(sprd_data);
+ if (ret) {
+ dev_err(&pdev->dev, "adc pm init err.\n");
+ return ret;
+ }
+
+ ret = sprd_adc_ch_data_init(sprd_data);
+ if (ret) {
+ dev_err(&pdev->dev, "ch data init err.\n");
+ return ret;
+ }
+
+ ret = sprd_adc_hw_enable(sprd_data);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to enable ADC module\n");
+ return ret;
+ }
+
+ ret = devm_add_action(&pdev->dev, sprd_adc_hw_disable, sprd_data);
+ if (ret) {
+ sprd_adc_hw_disable(sprd_data);
+ dev_err(&pdev->dev, "failed to add ADC disable action\n");
+ return ret;
+ }
+
+ ret = sprd_adc_soft_rst(sprd_data);
+ if (ret) {
+ dev_err(&pdev->dev, "adc soft rst failed\n");
+ return ret;
+ }
+
+ indio_dev->dev.parent = &pdev->dev;
+ indio_dev->name = dev_name(&pdev->dev);
+ indio_dev->modes = INDIO_DIRECT_MODE;
+ indio_dev->info = &sprd_info;
+ indio_dev->channels = sprd_channels;
+ indio_dev->num_channels = ARRAY_SIZE(sprd_channels);
+ ret = devm_iio_device_register(&pdev->dev, indio_dev);
+ if (ret)
+ dev_err(&pdev->dev, "could not register iio (ADC)");
+
+ platform_set_drvdata(pdev, indio_dev);
+
+ return ret;
+}
+
+static int sprd_adc_pm_suspend(struct device *dev)
+{
+ struct sprd_adc_data *sprd_data = iio_priv(dev_get_drvdata(dev));
+
+ mutex_lock(&sprd_data->mutex);
+ sprd_data->pm_data.dev_suspended = true;
+ mutex_unlock(&sprd_data->mutex);
+
+ return 0;
+}
+
+static int sprd_adc_pm_resume(struct device *dev)
+{
+ struct sprd_adc_data *sprd_data = iio_priv(dev_get_drvdata(dev));
+
+ mutex_lock(&sprd_data->mutex);
+ sprd_data->pm_data.dev_suspended = false;
+ mutex_unlock(&sprd_data->mutex);
+
+ return 0;
+}
+
+static const struct sprd_adc_variant_data ump9620_data = {
+ .pmic_type = UMP9620_ADC,
+ .glb_reg_base = 0x2000,
+ .adc_reg_base_offset = 0x4,
+ .reg_list = regs_ump9620,
+ .graph_index = TWO_CELL_GRAPH,
+ .calib_infos = {
+ CALIB_INFO_INIT(11, SCALE_00, GRAPH_BIG),
+ CALIB_INFO_INIT(1, SCALE_00, GRAPH_SMALL),
+ CALIB_INFO_INIT(0, SCALE_01, GRAPH_VBAT_DET)
+ },
+ .aux_ratio_comm = {RATIO_DEF, RATIO(100, 133), RATIO(1000, 2600), RATIO(1000, 4060)},
+ .ch_data_init = ump9620_ch_data_init,
+};
+
+static const struct sprd_adc_variant_data ump518_data = {
+ .pmic_type = UMP518_ADC,
+ .glb_reg_base = 0x1800,
+ .adc_reg_base_offset = 0x4,
+ .reg_list = regs_ump9620,
+ .graph_index = TWO_CELL_GRAPH,
+ .calib_infos = {
+ CALIB_INFO_INIT(11, SCALE_00, GRAPH_BIG),
+ CALIB_INFO_INIT(1, SCALE_00, GRAPH_SMALL),
+ CALIB_INFO_INIT(0, SCALE_01, GRAPH_VBAT_DET)
+ },
+ .aux_ratio_comm = {RATIO_DEF, RATIO(100, 133), RATIO(1000, 2600), RATIO(1000, 4060)},
+ .ch_data_init = ump9620_ch_data_init,
+};
+
+static const struct of_device_id sprd_adc_of_match[] = {
+ { .compatible = "sprd,ump9620-adc", .data = &ump9620_data},
+ { .compatible = "sprd,ump518-adc", .data = &ump518_data},
+ { }
+};
+
+static const struct dev_pm_ops sprd_adc_pm_ops = {
+ .suspend_noirq = sprd_adc_pm_suspend,
+ .resume_noirq = sprd_adc_pm_resume,
+};
+
+static struct platform_driver sprd_adc_driver = {
+ .probe = sprd_adc_probe,
+ .driver = {
+ .name = "sprd-adc",
+ .of_match_table = sprd_adc_of_match,
+ .pm = &sprd_adc_pm_ops,
+ },
+};
+
+module_platform_driver(sprd_adc_driver);
+MODULE_DESCRIPTION("SPRD PMIC ADC Driver");
+MODULE_LICENSE("GPL");
--
2.17.1
On Wed, Aug 16, 2023 at 04:02:24PM +0800, Mingjin Yang wrote:
> Add ump518 pmic adc description and sample in dt-bindings.
>
> Signed-off-by: Mingjin Yang <[email protected]>
> ---
> Documentation/devicetree/bindings/iio/adc/sprd,sc2720-adc.yaml | 2 ++
Acked-by: Conor Dooley <[email protected]>
Thanks,
Conor.
> 1 file changed, 2 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/iio/adc/sprd,sc2720-adc.yaml b/Documentation/devicetree/bindings/iio/adc/sprd,sc2720-adc.yaml
> index 8181cf9a8e07..f28d188d83da 100644
> --- a/Documentation/devicetree/bindings/iio/adc/sprd,sc2720-adc.yaml
> +++ b/Documentation/devicetree/bindings/iio/adc/sprd,sc2720-adc.yaml
> @@ -21,6 +21,7 @@ properties:
> - sprd,sc2730-adc
> - sprd,sc2731-adc
> - sprd,ump9620-adc
> + - sprd,ump518-adc
>
> reg:
> maxItems: 1
> @@ -46,6 +47,7 @@ allOf:
> contains:
> enum:
> - sprd,ump9620-adc
> + - sprd,ump518-adc
> then:
> properties:
> nvmem-cells:
> --
> 2.17.1
>
On Wed, 16 Aug 2023 15:44:55 +0100
Conor Dooley <[email protected]> wrote:
> On Wed, Aug 16, 2023 at 04:02:24PM +0800, Mingjin Yang wrote:
> > Add ump518 pmic adc description and sample in dt-bindings.
ADC
Description? I'm seeing the compatible only which doesn't seem like
a description to me.
> >
> > Signed-off-by: Mingjin Yang <[email protected]>
> > ---
> > Documentation/devicetree/bindings/iio/adc/sprd,sc2720-adc.yaml | 2 ++
>
> Acked-by: Conor Dooley <[email protected]>
>
> Thanks,
> Conor.
>
> > 1 file changed, 2 insertions(+)
> >
> > diff --git a/Documentation/devicetree/bindings/iio/adc/sprd,sc2720-adc.yaml b/Documentation/devicetree/bindings/iio/adc/sprd,sc2720-adc.yaml
> > index 8181cf9a8e07..f28d188d83da 100644
> > --- a/Documentation/devicetree/bindings/iio/adc/sprd,sc2720-adc.yaml
> > +++ b/Documentation/devicetree/bindings/iio/adc/sprd,sc2720-adc.yaml
> > @@ -21,6 +21,7 @@ properties:
> > - sprd,sc2730-adc
> > - sprd,sc2731-adc
> > - sprd,ump9620-adc
> > + - sprd,ump518-adc
alpha-numeric ordering probably worth retaining.
So I'd move this and the case below up one line.
Thanks,
Jonathan
> >
> > reg:
> > maxItems: 1
> > @@ -46,6 +47,7 @@ allOf:
> > contains:
> > enum:
> > - sprd,ump9620-adc
> > + - sprd,ump518-adc
> > then:
> > properties:
> > nvmem-cells:
> > --
> > 2.17.1
> >
On Wed, 30 Aug 2023 15:15:12 +0800
杨明金 <[email protected]> wrote:
> Jonathan Cameron <[email protected]> 于2023年8月28日周一 23:56写道：
> >
Hi,
Please crop replies to relevant part only. Hopefully I found it!
> > > +static int sprd_adc_enable(struct sprd_adc_data *data, int channel)
> > > +{
> > > + int ret = 0;
> > > + u32 reg_read = 0;
> > > +
> > > + if (data->pm_data.clk_regmap) {
> > > + ret = regmap_update_bits(data->pm_data.clk_regmap, data->pm_data.clk_reg,
> > > + data->pm_data.clk_reg_mask,
> > > + data->pm_data.clk_reg_mask);
> > > + ret |= regmap_read(data->pm_data.clk_regmap, data->pm_data.clk_reg, ®_read);
> > > + if (ret) {
> > > + dev_err(data->dev, "failed to enable clk26m, channel %d\n", channel);
> > > + return ret;
> > > + }
> > > + dev_dbg(data->dev, "enable clk26m: ch %d, reg_read 0x%x\n", channel, reg_read);
> >
> > Directly accessing the regmap of a clock seems unusual. Why not provide generic clock interfaces
> > for this?
>
> This register is used to vote to enable/disable the pmic 26m clk which
> is provided to modules like audio, typec and adc.
> Therefore, this clk cannot be disabled or enabled directly.
clk_enable() and friends support reference counted enable and disable
so I don't understand why this needs something unusual.
>
> > > +static int sprd_adc_probe(struct platform_device *pdev)
> > > +{
> > > + struct device_node *np = pdev->dev.of_node;
> > > + struct sprd_adc_data *sprd_data;
> > > + const struct sprd_adc_variant_data *pdata;
> > > + struct iio_dev *indio_dev;
> > > + int ret;
> > > +
> > > + pdata = of_device_get_match_data(&pdev->dev);
> >
> > device_get_match_data()
> >
> >
> > > + if (!pdata) {
> > > + dev_err(&pdev->dev, "No matching driver data found\n");
> > > + return -EINVAL;
> > > + }
> > > +
> > > + indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*sprd_data));
> > > + if (!indio_dev)
> > > + return -ENOMEM;
> > > +
> > > + sprd_data = iio_priv(indio_dev);
> > > +
> > > + sprd_data->regmap = dev_get_regmap(pdev->dev.parent, NULL);
> > > + if (!sprd_data->regmap) {
> > > + dev_err(&pdev->dev, "failed to get ADC regmap\n");
> > > + return -ENODEV;
> > > + }
> > > +
> > > + ret = of_property_read_u32(np, "reg", &sprd_data->base);
> >
> > Even though some elements of this (of_hwspin...) don't have generic firmware
> > interfaces, I would prefer to see those from linux/property.h used
> > wherever possible. It will take us a long time to make that a subsystem
> > wide change, but good not to have more unnecessary instances of device tree
> > specific property reading.
>
> Sorry, I don't understand what needs to be modified. Can you provide
> more information or give an example?
> Do you mean that the "reg" property reading is unnecessary?
No. Where possibly use
device_property_read_u32(dev, "reg".. etc
and similar functions from
include/linux/property.h rather than device tree specific ones.
The generic property handling deals with various different types of firmware
without needing drivers to be aware of it.
Some elements that you need here do not have generic property handling so
for those you will need to continue using the of_ variants.
Note that this is to support long term move of everything to the generic
firmware framework. Even if we drivers in IIO etc that are really device
tree only there are benefits for maintenance in using one framework
for all drivers. As some IIO drivers do support other firmware types
(ACPI for example) the generic version is the preferred choice.
Thanks,
Jonathan