2023-09-03 17:45:03

by Biju Das

[permalink] [raw]
Subject: [PATCH v3 1/2] regulator: pv880x0: Drop ifdeffery

Drop of_match_ptr() from pv88080_regulator_driver and get rid of ugly
CONFIG_OF ifdeffery. This slightly increases the size of pv88080_dt_ids
on non-OF system and shouldn't be an issue.

Add mod_devicetable.h include.

While at it, remove trailing comma in the terminator entry for OF/ID
table.

Suggested-by: Andy Shevchenko <[email protected]>
Signed-off-by: Biju Das <[email protected]>
---
v2->v3:
* Swapped the patch.
* Removed trailing comma in the terminator entry for OF/ID table.
* Restored OF table position.
* Updated commit description.
v2:
* New patch.
---
drivers/regulator/pv88080-regulator.c | 9 ++++-----
1 file changed, 4 insertions(+), 5 deletions(-)

diff --git a/drivers/regulator/pv88080-regulator.c b/drivers/regulator/pv88080-regulator.c
index 7ab3e4a9bd28..1b2a8385e2e8 100644
--- a/drivers/regulator/pv88080-regulator.c
+++ b/drivers/regulator/pv88080-regulator.c
@@ -5,6 +5,7 @@

#include <linux/err.h>
#include <linux/i2c.h>
+#include <linux/mod_devicetable.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/init.h>
@@ -196,15 +197,13 @@ static const struct pv88080_compatible_regmap pv88080_ba_regs = {
.hvbuck_vsel_mask = PV88080_VHVBUCK_MASK,
};

-#ifdef CONFIG_OF
static const struct of_device_id pv88080_dt_ids[] = {
{ .compatible = "pvs,pv88080", .data = (void *)TYPE_PV88080_AA },
{ .compatible = "pvs,pv88080-aa", .data = (void *)TYPE_PV88080_AA },
{ .compatible = "pvs,pv88080-ba", .data = (void *)TYPE_PV88080_BA },
- {},
+ {}
};
MODULE_DEVICE_TABLE(of, pv88080_dt_ids);
-#endif

static unsigned int pv88080_buck_get_mode(struct regulator_dev *rdev)
{
@@ -550,7 +549,7 @@ static const struct i2c_device_id pv88080_i2c_id[] = {
{ "pv88080", TYPE_PV88080_AA },
{ "pv88080-aa", TYPE_PV88080_AA },
{ "pv88080-ba", TYPE_PV88080_BA },
- {},
+ {}
};
MODULE_DEVICE_TABLE(i2c, pv88080_i2c_id);

@@ -558,7 +557,7 @@ static struct i2c_driver pv88080_regulator_driver = {
.driver = {
.name = "pv88080",
.probe_type = PROBE_PREFER_ASYNCHRONOUS,
- .of_match_table = of_match_ptr(pv88080_dt_ids),
+ .of_match_table = pv88080_dt_ids,
},
.probe = pv88080_i2c_probe,
.id_table = pv88080_i2c_id,
--
2.25.1