* Marc Haber <[email protected]> [230906 14:41]:
> With my tools I have found out that it really seems to be related to the
> CPU of the host. I have changed my VM definition to "copy host CPU
> configuration to VM" in libvirt and have moved this very VM (image and
> settings) to hosts with a "Ryzen 5 Pro 4650G" and to an "Intel Xeon
> E3-1246" where they work flawlessly, while on both APUs I have available
> ("AMD G-T40E" and "AMD GX-412TC SOC") the regression in 6.5 shows. And
> if I boot other VMs on the APUs with 6.5 the issue comes up. It is a
> clear regression since going back to 4.6's serial code solves the issue
> on the APUs.
Not sure why the CPU matters here..
One thing to check is if you have these in your .config:
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
Or do you maybe have CONFIG_SERIAL_CORE=m as loadable module?
If you have CONFIG_SERIAL_CORE=m, maybe you need to modprobe serial_base
if you have some minimal rootfs that does not automatically do it for you.
Regards,
Tony