The bridge does not have any cells on the node level, just on the
ports.
The VGA connector is actually named "J30" on the board so give it that
name in the device tree.
Signed-off-by: Linus Walleij <[email protected]>
---
arch/arm/boot/dts/arm/integratorap-im-pd1.dts | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/arm/integratorap-im-pd1.dts b/arch/arm/boot/dts/arm/integratorap-im-pd1.dts
index 7072a70da00d..367850ea0912 100644
--- a/arch/arm/boot/dts/arm/integratorap-im-pd1.dts
+++ b/arch/arm/boot/dts/arm/integratorap-im-pd1.dts
@@ -129,8 +129,6 @@ button@5 {
bridge {
compatible = "ti,ths8134b", "ti,ths8134";
- #address-cells = <1>;
- #size-cells = <0>;
ports {
#address-cells = <1>;
@@ -154,6 +152,7 @@ vga_bridge_out: endpoint {
vga {
compatible = "vga-connector";
+ label = "J30";
port {
vga_con_in: endpoint {
--
2.34.1