Import processor configuration for the Xtensa core found in Espressif
ESP32S3 SoC.
Signed-off-by: Max Filippov <[email protected]>
---
.../variants/esp32s3/include/variant/core.h | 681 ++++++++++++++++++
.../esp32s3/include/variant/tie-asm.h | 429 +++++++++++
.../variants/esp32s3/include/variant/tie.h | 207 ++++++
3 files changed, 1317 insertions(+)
create mode 100644 arch/xtensa/variants/esp32s3/include/variant/core.h
create mode 100644 arch/xtensa/variants/esp32s3/include/variant/tie-asm.h
create mode 100644 arch/xtensa/variants/esp32s3/include/variant/tie.h
diff --git a/arch/xtensa/variants/esp32s3/include/variant/core.h b/arch/xtensa/variants/esp32s3/include/variant/core.h
new file mode 100644
index 000000000000..6c8fc963c0aa
--- /dev/null
+++ b/arch/xtensa/variants/esp32s3/include/variant/core.h
@@ -0,0 +1,681 @@
+/*
+ * xtensa/config/core-isa.h -- HAL definitions that are dependent on Xtensa
+ * processor CORE configuration
+ *
+ * See <xtensa/config/core.h>, which includes this file, for more details.
+ */
+
+/* Xtensa processor core configuration information.
+
+ Customer ID=15128; Build=0x90f1f; Copyright (c) 1999-2021 Tensilica Inc.
+
+ Permission is hereby granted, free of charge, to any person obtaining
+ a copy of this software and associated documentation files (the
+ "Software"), to deal in the Software without restriction, including
+ without limitation the rights to use, copy, modify, merge, publish,
+ distribute, sublicense, and/or sell copies of the Software, and to
+ permit persons to whom the Software is furnished to do so, subject to
+ the following conditions:
+
+ The above copyright notice and this permission notice shall be included
+ in all copies or substantial portions of the Software.
+
+ THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+ IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY
+ CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
+ TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
+ SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. */
+
+#ifndef _XTENSA_CORE_CONFIGURATION_H
+#define _XTENSA_CORE_CONFIGURATION_H
+
+
+/****************************************************************************
+ Parameters Useful for Any Code, USER or PRIVILEGED
+ ****************************************************************************/
+
+/*
+ * Note: Macros of the form XCHAL_HAVE_*** have a value of 1 if the option is
+ * configured, and a value of 0 otherwise. These macros are always defined.
+ */
+
+
+/*----------------------------------------------------------------------
+ ISA
+ ----------------------------------------------------------------------*/
+
+#define XCHAL_HAVE_BE 0 /* big-endian byte ordering */
+#define XCHAL_HAVE_WINDOWED 1 /* windowed registers option */
+#define XCHAL_NUM_AREGS 64 /* num of physical addr regs */
+#define XCHAL_NUM_AREGS_LOG2 6 /* log2(XCHAL_NUM_AREGS) */
+#define XCHAL_MAX_INSTRUCTION_SIZE 4 /* max instr bytes (3..8) */
+#define XCHAL_HAVE_DEBUG 1 /* debug option */
+#define XCHAL_HAVE_DENSITY 1 /* 16-bit instructions */
+#define XCHAL_HAVE_LOOPS 1 /* zero-overhead loops */
+#define XCHAL_LOOP_BUFFER_SIZE 256 /* zero-ov. loop instr buffer size */
+#define XCHAL_HAVE_NSA 1 /* NSA/NSAU instructions */
+#define XCHAL_HAVE_MINMAX 1 /* MIN/MAX instructions */
+#define XCHAL_HAVE_SEXT 1 /* SEXT instruction */
+#define XCHAL_HAVE_DEPBITS 0 /* DEPBITS instruction */
+#define XCHAL_HAVE_CLAMPS 1 /* CLAMPS instruction */
+#define XCHAL_HAVE_MUL16 1 /* MUL16S/MUL16U instructions */
+#define XCHAL_HAVE_MUL32 1 /* MULL instruction */
+#define XCHAL_HAVE_MUL32_HIGH 1 /* MULUH/MULSH instructions */
+#define XCHAL_HAVE_DIV32 1 /* QUOS/QUOU/REMS/REMU instructions */
+#define XCHAL_HAVE_L32R 1 /* L32R instruction */
+#define XCHAL_HAVE_ABSOLUTE_LITERALS 0 /* non-PC-rel (extended) L32R */
+#define XCHAL_HAVE_CONST16 0 /* CONST16 instruction */
+#define XCHAL_HAVE_ADDX 1 /* ADDX#/SUBX# instructions */
+#define XCHAL_HAVE_EXCLUSIVE 0 /* L32EX/S32EX instructions */
+#define XCHAL_HAVE_WIDE_BRANCHES 0 /* B*.W18 or B*.W15 instr's */
+#define XCHAL_HAVE_PREDICTED_BRANCHES 0 /* B[EQ/EQZ/NE/NEZ]T instr's */
+#define XCHAL_HAVE_CALL4AND12 1 /* (obsolete option) */
+#define XCHAL_HAVE_ABS 1 /* ABS instruction */
+/*#define XCHAL_HAVE_POPC 0*/ /* POPC instruction */
+/*#define XCHAL_HAVE_CRC 0*/ /* CRC instruction */
+#define XCHAL_HAVE_RELEASE_SYNC 1 /* L32AI/S32RI instructions */
+#define XCHAL_HAVE_S32C1I 1 /* S32C1I instruction */
+#define XCHAL_HAVE_SPECULATION 0 /* speculation */
+#define XCHAL_HAVE_FULL_RESET 1 /* all regs/state reset */
+#define XCHAL_NUM_CONTEXTS 1 /* */
+#define XCHAL_NUM_MISC_REGS 4 /* num of scratch regs (0..4) */
+#define XCHAL_HAVE_TAP_MASTER 0 /* JTAG TAP control instr's */
+#define XCHAL_HAVE_PRID 1 /* processor ID register */
+#define XCHAL_HAVE_EXTERN_REGS 1 /* WER/RER instructions */
+#define XCHAL_HAVE_MX 0 /* MX core (Tensilica internal) */
+#define XCHAL_HAVE_MP_INTERRUPTS 0 /* interrupt distributor port */
+#define XCHAL_HAVE_MP_RUNSTALL 0 /* core RunStall control port */
+#define XCHAL_HAVE_PSO 0 /* Power Shut-Off */
+#define XCHAL_HAVE_PSO_CDM 0 /* core/debug/mem pwr domains */
+#define XCHAL_HAVE_PSO_FULL_RETENTION 0 /* all regs preserved on PSO */
+#define XCHAL_HAVE_THREADPTR 1 /* THREADPTR register */
+#define XCHAL_HAVE_BOOLEANS 1 /* boolean registers */
+#define XCHAL_HAVE_CP 1 /* CPENABLE reg (coprocessor) */
+#define XCHAL_CP_MAXCFG 8 /* max allowed cp id plus one */
+#define XCHAL_HAVE_MAC16 1 /* MAC16 package */
+
+#define XCHAL_HAVE_FUSION 0 /* Fusion*/
+#define XCHAL_HAVE_FUSION_FP 0 /* Fusion FP option */
+#define XCHAL_HAVE_FUSION_LOW_POWER 0 /* Fusion Low Power option */
+#define XCHAL_HAVE_FUSION_AES 0 /* Fusion BLE/Wifi AES-128 CCM option */
+#define XCHAL_HAVE_FUSION_CONVENC 0 /* Fusion Conv Encode option */
+#define XCHAL_HAVE_FUSION_LFSR_CRC 0 /* Fusion LFSR-CRC option */
+#define XCHAL_HAVE_FUSION_BITOPS 0 /* Fusion Bit Operations Support option */
+#define XCHAL_HAVE_FUSION_AVS 0 /* Fusion AVS option */
+#define XCHAL_HAVE_FUSION_16BIT_BASEBAND 0 /* Fusion 16-bit Baseband option */
+#define XCHAL_HAVE_FUSION_VITERBI 0 /* Fusion Viterbi option */
+#define XCHAL_HAVE_FUSION_SOFTDEMAP 0 /* Fusion Soft Bit Demap option */
+#define XCHAL_HAVE_HIFIPRO 0 /* HiFiPro Audio Engine pkg */
+#define XCHAL_HAVE_HIFI5 0 /* HiFi5 Audio Engine pkg */
+#define XCHAL_HAVE_HIFI5_NN_MAC 0 /* HiFi5 Audio Engine NN-MAC option */
+#define XCHAL_HAVE_HIFI5_VFPU 0 /* HiFi5 Audio Engine Single-Precision VFPU option */
+#define XCHAL_HAVE_HIFI5_HP_VFPU 0 /* HiFi5 Audio Engine Half-Precision VFPU option */
+#define XCHAL_HAVE_HIFI4 0 /* HiFi4 Audio Engine pkg */
+#define XCHAL_HAVE_HIFI4_VFPU 0 /* HiFi4 Audio Engine VFPU option */
+#define XCHAL_HAVE_HIFI3 0 /* HiFi3 Audio Engine pkg */
+#define XCHAL_HAVE_HIFI3_VFPU 0 /* HiFi3 Audio Engine VFPU option */
+#define XCHAL_HAVE_HIFI3Z 0 /* HiFi3Z Audio Engine pkg */
+#define XCHAL_HAVE_HIFI3Z_VFPU 0 /* HiFi3Z Audio Engine VFPU option */
+#define XCHAL_HAVE_HIFI2 0 /* HiFi2 Audio Engine pkg */
+#define XCHAL_HAVE_HIFI2EP 0 /* HiFi2EP */
+#define XCHAL_HAVE_HIFI_MINI 0
+
+
+
+#define XCHAL_HAVE_VECTORFPU2005 0 /* vector floating-point pkg */
+#define XCHAL_HAVE_USER_DPFPU 0 /* user DP floating-point pkg */
+#define XCHAL_HAVE_USER_SPFPU 0 /* user SP floating-point pkg */
+#define XCHAL_HAVE_FP 1 /* single prec floating point */
+#define XCHAL_HAVE_FP_DIV 1 /* FP with DIV instructions */
+#define XCHAL_HAVE_FP_RECIP 1 /* FP with RECIP instructions */
+#define XCHAL_HAVE_FP_SQRT 1 /* FP with SQRT instructions */
+#define XCHAL_HAVE_FP_RSQRT 1 /* FP with RSQRT instructions */
+#define XCHAL_HAVE_DFP 0 /* double precision FP pkg */
+#define XCHAL_HAVE_DFP_DIV 0 /* DFP with DIV instructions */
+#define XCHAL_HAVE_DFP_RECIP 0 /* DFP with RECIP instructions*/
+#define XCHAL_HAVE_DFP_SQRT 0 /* DFP with SQRT instructions */
+#define XCHAL_HAVE_DFP_RSQRT 0 /* DFP with RSQRT instructions*/
+#define XCHAL_HAVE_DFP_ACCEL 0 /* double precision FP acceleration pkg */
+#define XCHAL_HAVE_DFP_accel XCHAL_HAVE_DFP_ACCEL /* for backward compatibility */
+
+#define XCHAL_HAVE_DFPU_SINGLE_ONLY 1 /* DFPU Coprocessor, single precision only */
+#define XCHAL_HAVE_DFPU_SINGLE_DOUBLE 0 /* DFPU Coprocessor, single and double precision */
+#define XCHAL_HAVE_VECTRA1 0 /* Vectra I pkg */
+#define XCHAL_HAVE_VECTRALX 0 /* Vectra LX pkg */
+
+#define XCHAL_HAVE_FUSIONG 0 /* FusionG */
+#define XCHAL_HAVE_FUSIONG3 0 /* FusionG3 */
+#define XCHAL_HAVE_FUSIONG6 0 /* FusionG6 */
+#define XCHAL_HAVE_FUSIONG_SP_VFPU 0 /* sp_vfpu option on FusionG */
+#define XCHAL_HAVE_FUSIONG_DP_VFPU 0 /* dp_vfpu option on FusionG */
+#define XCHAL_FUSIONG_SIMD32 0 /* simd32 for FusionG */
+
+#define XCHAL_HAVE_PDX 0 /* PDX */
+#define XCHAL_PDX_SIMD32 0 /* simd32 for PDX */
+#define XCHAL_HAVE_PDX4 0 /* PDX4 */
+#define XCHAL_HAVE_PDX8 0 /* PDX8 */
+#define XCHAL_HAVE_PDX16 0 /* PDX16 */
+
+#define XCHAL_HAVE_CONNXD2 0 /* ConnX D2 pkg */
+#define XCHAL_HAVE_CONNXD2_DUALLSFLIX 0 /* ConnX D2 & Dual LoadStore Flix */
+#define XCHAL_HAVE_BBE16 0 /* ConnX BBE16 pkg */
+#define XCHAL_HAVE_BBE16_RSQRT 0 /* BBE16 & vector recip sqrt */
+#define XCHAL_HAVE_BBE16_VECDIV 0 /* BBE16 & vector divide */
+#define XCHAL_HAVE_BBE16_DESPREAD 0 /* BBE16 & despread */
+#define XCHAL_HAVE_BBENEP 0 /* ConnX BBENEP pkgs */
+#define XCHAL_HAVE_BBENEP_SP_VFPU 0 /* sp_vfpu option on BBE-EP */
+#define XCHAL_HAVE_BSP3 0 /* ConnX BSP3 pkg */
+#define XCHAL_HAVE_BSP3_TRANSPOSE 0 /* BSP3 & transpose32x32 */
+#define XCHAL_HAVE_SSP16 0 /* ConnX SSP16 pkg */
+#define XCHAL_HAVE_SSP16_VITERBI 0 /* SSP16 & viterbi */
+#define XCHAL_HAVE_TURBO16 0 /* ConnX Turbo16 pkg */
+#define XCHAL_HAVE_BBP16 0 /* ConnX BBP16 pkg */
+#define XCHAL_HAVE_FLIX3 0 /* basic 3-way FLIX option */
+#define XCHAL_HAVE_GRIVPEP 0 /* General Release of IVPEP */
+#define XCHAL_HAVE_GRIVPEP_HISTOGRAM 0 /* Histogram option on GRIVPEP */
+
+#define XCHAL_HAVE_VISION 0 /* Vision P5/P6 */
+#define XCHAL_VISION_SIMD16 0 /* simd16 for Vision P5/P6 */
+#define XCHAL_VISION_TYPE 0 /* Vision P5, P6, or P3 */
+#define XCHAL_VISION_QUAD_MAC_TYPE 0 /* quad_mac option on Vision P6 */
+#define XCHAL_HAVE_VISION_HISTOGRAM 0 /* histogram option on Vision P5/P6 */
+#define XCHAL_HAVE_VISION_SP_VFPU 0 /* sp_vfpu option on Vision P5/P6 */
+#define XCHAL_HAVE_VISION_HP_VFPU 0 /* hp_vfpu option on Vision P6 */
+
+#define XCHAL_HAVE_VISIONC 0 /* Vision C */
+
+/*----------------------------------------------------------------------
+ MISC
+ ----------------------------------------------------------------------*/
+
+#define XCHAL_NUM_LOADSTORE_UNITS 1 /* load/store units */
+#define XCHAL_NUM_WRITEBUFFER_ENTRIES 4 /* size of write buffer */
+#define XCHAL_INST_FETCH_WIDTH 4 /* instr-fetch width in bytes */
+#define XCHAL_DATA_WIDTH 16 /* data width in bytes */
+#define XCHAL_DATA_PIPE_DELAY 1 /* d-side pipeline delay
+ (1 = 5-stage, 2 = 7-stage) */
+#define XCHAL_CLOCK_GATING_GLOBAL 1 /* global clock gating */
+#define XCHAL_CLOCK_GATING_FUNCUNIT 1 /* funct. unit clock gating */
+/* In T1050, applies to selected core load and store instructions (see ISA): */
+#define XCHAL_UNALIGNED_LOAD_EXCEPTION 0 /* unaligned loads cause exc. */
+#define XCHAL_UNALIGNED_STORE_EXCEPTION 0 /* unaligned stores cause exc.*/
+#define XCHAL_UNALIGNED_LOAD_HW 1 /* unaligned loads work in hw */
+#define XCHAL_UNALIGNED_STORE_HW 1 /* unaligned stores work in hw*/
+
+#define XCHAL_SW_VERSION 1200012 /* sw version of this header */
+
+#define XCHAL_CORE_ID "LX7_ESP32_S3_MP" /* alphanum core name
+ (CoreID) set in the Xtensa
+ Processor Generator */
+
+#define XCHAL_BUILD_UNIQUE_ID 0x00090F1F /* 22-bit sw build ID */
+
+/*
+ * These definitions describe the hardware targeted by this software.
+ */
+#define XCHAL_HW_CONFIGID0 0xC2F0FFFE /* ConfigID hi 32 bits*/
+#define XCHAL_HW_CONFIGID1 0x23090F1F /* ConfigID lo 32 bits*/
+#define XCHAL_HW_VERSION_NAME "LX7.0.12" /* full version name */
+#define XCHAL_HW_VERSION_MAJOR 2700 /* major ver# of targeted hw */
+#define XCHAL_HW_VERSION_MINOR 12 /* minor ver# of targeted hw */
+#define XCHAL_HW_VERSION 270012 /* major*100+minor */
+#define XCHAL_HW_REL_LX7 1
+#define XCHAL_HW_REL_LX7_0 1
+#define XCHAL_HW_REL_LX7_0_12 1
+#define XCHAL_HW_CONFIGID_RELIABLE 1
+/* If software targets a *range* of hardware versions, these are the bounds: */
+#define XCHAL_HW_MIN_VERSION_MAJOR 2700 /* major v of earliest tgt hw */
+#define XCHAL_HW_MIN_VERSION_MINOR 12 /* minor v of earliest tgt hw */
+#define XCHAL_HW_MIN_VERSION 270012 /* earliest targeted hw */
+#define XCHAL_HW_MAX_VERSION_MAJOR 2700 /* major v of latest tgt hw */
+#define XCHAL_HW_MAX_VERSION_MINOR 12 /* minor v of latest tgt hw */
+#define XCHAL_HW_MAX_VERSION 270012 /* latest targeted hw */
+
+
+/*----------------------------------------------------------------------
+ CACHE
+ ----------------------------------------------------------------------*/
+
+#define XCHAL_ICACHE_LINESIZE 4 /* I-cache line size in bytes */
+#define XCHAL_DCACHE_LINESIZE 16 /* D-cache line size in bytes */
+#define XCHAL_ICACHE_LINEWIDTH 2 /* log2(I line size in bytes) */
+#define XCHAL_DCACHE_LINEWIDTH 4 /* log2(D line size in bytes) */
+
+#define XCHAL_ICACHE_SIZE 0 /* I-cache size in bytes or 0 */
+#define XCHAL_DCACHE_SIZE 0 /* D-cache size in bytes or 0 */
+
+#define XCHAL_DCACHE_IS_WRITEBACK 0 /* writeback feature */
+#define XCHAL_DCACHE_IS_COHERENT 0 /* MP coherence feature */
+
+#define XCHAL_HAVE_PREFETCH 0 /* PREFCTL register */
+#define XCHAL_HAVE_PREFETCH_L1 0 /* prefetch to L1 dcache */
+#define XCHAL_PREFETCH_CASTOUT_LINES 0 /* dcache pref. castout bufsz */
+#define XCHAL_PREFETCH_ENTRIES 0 /* cache prefetch entries */
+#define XCHAL_PREFETCH_BLOCK_ENTRIES 0 /* prefetch block streams */
+#define XCHAL_HAVE_CACHE_BLOCKOPS 0 /* block prefetch for caches */
+#define XCHAL_HAVE_ICACHE_TEST 0 /* Icache test instructions */
+#define XCHAL_HAVE_DCACHE_TEST 0 /* Dcache test instructions */
+#define XCHAL_HAVE_ICACHE_DYN_WAYS 0 /* Icache dynamic way support */
+#define XCHAL_HAVE_DCACHE_DYN_WAYS 0 /* Dcache dynamic way support */
+
+
+
+
+/****************************************************************************
+ Parameters Useful for PRIVILEGED (Supervisory or Non-Virtualized) Code
+ ****************************************************************************/
+
+
+#ifndef XTENSA_HAL_NON_PRIVILEGED_ONLY
+
+/*----------------------------------------------------------------------
+ CACHE
+ ----------------------------------------------------------------------*/
+
+#define XCHAL_HAVE_PIF 1 /* any outbound bus present */
+
+#define XCHAL_HAVE_AXI 0 /* AXI bus */
+#define XCHAL_HAVE_AXI_ECC 0 /* ECC on AXI bus */
+#define XCHAL_HAVE_ACELITE 0 /* ACELite bus */
+
+#define XCHAL_HAVE_PIF_WR_RESP 0 /* pif write response */
+#define XCHAL_HAVE_PIF_REQ_ATTR 1 /* pif attribute */
+
+/* If present, cache size in bytes == (ways * 2^(linewidth + setwidth)). */
+
+/* Number of cache sets in log2(lines per way): */
+#define XCHAL_ICACHE_SETWIDTH 0
+#define XCHAL_DCACHE_SETWIDTH 0
+
+/* Cache set associativity (number of ways): */
+#define XCHAL_ICACHE_WAYS 1
+#define XCHAL_DCACHE_WAYS 1
+
+/* Cache features: */
+#define XCHAL_ICACHE_LINE_LOCKABLE 0
+#define XCHAL_DCACHE_LINE_LOCKABLE 0
+#define XCHAL_ICACHE_ECC_PARITY 0
+#define XCHAL_DCACHE_ECC_PARITY 0
+#define XCHAL_ICACHE_ECC_WIDTH 1
+#define XCHAL_DCACHE_ECC_WIDTH 1
+
+/* Cache access size in bytes (affects operation of SICW instruction): */
+#define XCHAL_ICACHE_ACCESS_SIZE 1
+#define XCHAL_DCACHE_ACCESS_SIZE 1
+
+#define XCHAL_DCACHE_BANKS 0 /* number of banks */
+
+/* Number of encoded cache attr bits (see <xtensa/hal.h> for decoded bits): */
+#define XCHAL_CA_BITS 4
+
+
+/*----------------------------------------------------------------------
+ INTERNAL I/D RAM/ROMs and XLMI
+ ----------------------------------------------------------------------*/
+#define XCHAL_NUM_INSTROM 0 /* number of core instr. ROMs */
+#define XCHAL_NUM_INSTRAM 1 /* number of core instr. RAMs */
+#define XCHAL_NUM_DATAROM 0 /* number of core data ROMs */
+#define XCHAL_NUM_DATARAM 1 /* number of core data RAMs */
+#define XCHAL_NUM_URAM 0 /* number of core unified RAMs*/
+#define XCHAL_NUM_XLMI 0 /* number of core XLMI ports */
+
+/* Instruction RAM 0: */
+#define XCHAL_INSTRAM0_VADDR 0x40000000 /* virtual address */
+#define XCHAL_INSTRAM0_PADDR 0x40000000 /* physical address */
+#define XCHAL_INSTRAM0_SIZE 67108864 /* size in bytes */
+#define XCHAL_INSTRAM0_ECC_PARITY 0 /* ECC/parity type, 0=none */
+#define XCHAL_HAVE_INSTRAM0 1
+#define XCHAL_INSTRAM0_HAVE_IDMA 0 /* idma supported by this local memory */
+
+/* Data RAM 0: */
+#define XCHAL_DATARAM0_VADDR 0x3C000000 /* virtual address */
+#define XCHAL_DATARAM0_PADDR 0x3C000000 /* physical address */
+#define XCHAL_DATARAM0_SIZE 67108864 /* size in bytes */
+#define XCHAL_DATARAM0_ECC_PARITY 0 /* ECC/parity type, 0=none */
+#define XCHAL_DATARAM0_BANKS 1 /* number of banks */
+#define XCHAL_HAVE_DATARAM0 1
+#define XCHAL_DATARAM0_HAVE_IDMA 0 /* idma supported by this local memory */
+
+#define XCHAL_HAVE_IDMA 0
+#define XCHAL_HAVE_IDMA_TRANSPOSE 0
+
+#define XCHAL_HAVE_IMEM_LOADSTORE 1 /* can load/store to IROM/IRAM*/
+
+
+/*----------------------------------------------------------------------
+ INTERRUPTS and TIMERS
+ ----------------------------------------------------------------------*/
+
+#define XCHAL_HAVE_INTERRUPTS 1 /* interrupt option */
+#define XCHAL_HAVE_HIGHPRI_INTERRUPTS 1 /* med/high-pri. interrupts */
+#define XCHAL_HAVE_NMI 1 /* non-maskable interrupt */
+#define XCHAL_HAVE_CCOUNT 1 /* CCOUNT reg. (timer option) */
+#define XCHAL_NUM_TIMERS 3 /* number of CCOMPAREn regs */
+#define XCHAL_NUM_INTERRUPTS 32 /* number of interrupts */
+#define XCHAL_NUM_INTERRUPTS_LOG2 5 /* ceil(log2(NUM_INTERRUPTS)) */
+#define XCHAL_NUM_EXTINTERRUPTS 26 /* num of external interrupts */
+#define XCHAL_NUM_INTLEVELS 6 /* number of interrupt levels
+ (not including level zero) */
+#define XCHAL_EXCM_LEVEL 3 /* level masked by PS.EXCM */
+ /* (always 1 in XEA1; levels 2 .. EXCM_LEVEL are "medium priority") */
+
+/* Masks of interrupts at each interrupt level: */
+#define XCHAL_INTLEVEL1_MASK 0x000637FF
+#define XCHAL_INTLEVEL2_MASK 0x00380000
+#define XCHAL_INTLEVEL3_MASK 0x28C08800
+#define XCHAL_INTLEVEL4_MASK 0x53000000
+#define XCHAL_INTLEVEL5_MASK 0x84010000
+#define XCHAL_INTLEVEL6_MASK 0x00000000
+#define XCHAL_INTLEVEL7_MASK 0x00004000
+
+/* Masks of interrupts at each range 1..n of interrupt levels: */
+#define XCHAL_INTLEVEL1_ANDBELOW_MASK 0x000637FF
+#define XCHAL_INTLEVEL2_ANDBELOW_MASK 0x003E37FF
+#define XCHAL_INTLEVEL3_ANDBELOW_MASK 0x28FEBFFF
+#define XCHAL_INTLEVEL4_ANDBELOW_MASK 0x7BFEBFFF
+#define XCHAL_INTLEVEL5_ANDBELOW_MASK 0xFFFFBFFF
+#define XCHAL_INTLEVEL6_ANDBELOW_MASK 0xFFFFBFFF
+#define XCHAL_INTLEVEL7_ANDBELOW_MASK 0xFFFFFFFF
+
+/* Level of each interrupt: */
+#define XCHAL_INT0_LEVEL 1
+#define XCHAL_INT1_LEVEL 1
+#define XCHAL_INT2_LEVEL 1
+#define XCHAL_INT3_LEVEL 1
+#define XCHAL_INT4_LEVEL 1
+#define XCHAL_INT5_LEVEL 1
+#define XCHAL_INT6_LEVEL 1
+#define XCHAL_INT7_LEVEL 1
+#define XCHAL_INT8_LEVEL 1
+#define XCHAL_INT9_LEVEL 1
+#define XCHAL_INT10_LEVEL 1
+#define XCHAL_INT11_LEVEL 3
+#define XCHAL_INT12_LEVEL 1
+#define XCHAL_INT13_LEVEL 1
+#define XCHAL_INT14_LEVEL 7
+#define XCHAL_INT15_LEVEL 3
+#define XCHAL_INT16_LEVEL 5
+#define XCHAL_INT17_LEVEL 1
+#define XCHAL_INT18_LEVEL 1
+#define XCHAL_INT19_LEVEL 2
+#define XCHAL_INT20_LEVEL 2
+#define XCHAL_INT21_LEVEL 2
+#define XCHAL_INT22_LEVEL 3
+#define XCHAL_INT23_LEVEL 3
+#define XCHAL_INT24_LEVEL 4
+#define XCHAL_INT25_LEVEL 4
+#define XCHAL_INT26_LEVEL 5
+#define XCHAL_INT27_LEVEL 3
+#define XCHAL_INT28_LEVEL 4
+#define XCHAL_INT29_LEVEL 3
+#define XCHAL_INT30_LEVEL 4
+#define XCHAL_INT31_LEVEL 5
+#define XCHAL_DEBUGLEVEL 6 /* debug interrupt level */
+#define XCHAL_HAVE_DEBUG_EXTERN_INT 1 /* OCD external db interrupt */
+#define XCHAL_NMILEVEL 7 /* NMI "level" (for use with
+ EXCSAVE/EPS/EPC_n, RFI n) */
+
+/* Type of each interrupt: */
+#define XCHAL_INT0_TYPE XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT1_TYPE XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT2_TYPE XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT3_TYPE XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT4_TYPE XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT5_TYPE XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT6_TYPE XTHAL_INTTYPE_TIMER
+#define XCHAL_INT7_TYPE XTHAL_INTTYPE_SOFTWARE
+#define XCHAL_INT8_TYPE XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT9_TYPE XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT10_TYPE XTHAL_INTTYPE_EXTERN_EDGE
+#define XCHAL_INT11_TYPE XTHAL_INTTYPE_PROFILING
+#define XCHAL_INT12_TYPE XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT13_TYPE XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT14_TYPE XTHAL_INTTYPE_NMI
+#define XCHAL_INT15_TYPE XTHAL_INTTYPE_TIMER
+#define XCHAL_INT16_TYPE XTHAL_INTTYPE_TIMER
+#define XCHAL_INT17_TYPE XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT18_TYPE XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT19_TYPE XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT20_TYPE XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT21_TYPE XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT22_TYPE XTHAL_INTTYPE_EXTERN_EDGE
+#define XCHAL_INT23_TYPE XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT24_TYPE XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT25_TYPE XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT26_TYPE XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT27_TYPE XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT28_TYPE XTHAL_INTTYPE_EXTERN_EDGE
+#define XCHAL_INT29_TYPE XTHAL_INTTYPE_SOFTWARE
+#define XCHAL_INT30_TYPE XTHAL_INTTYPE_EXTERN_EDGE
+#define XCHAL_INT31_TYPE XTHAL_INTTYPE_EXTERN_LEVEL
+
+/* Masks of interrupts for each type of interrupt: */
+#define XCHAL_INTTYPE_MASK_UNCONFIGURED 0x00000000
+#define XCHAL_INTTYPE_MASK_SOFTWARE 0x20000080
+#define XCHAL_INTTYPE_MASK_EXTERN_EDGE 0x50400400
+#define XCHAL_INTTYPE_MASK_EXTERN_LEVEL 0x8FBE333F
+#define XCHAL_INTTYPE_MASK_TIMER 0x00018040
+#define XCHAL_INTTYPE_MASK_NMI 0x00004000
+#define XCHAL_INTTYPE_MASK_WRITE_ERROR 0x00000000
+#define XCHAL_INTTYPE_MASK_PROFILING 0x00000800
+#define XCHAL_INTTYPE_MASK_IDMA_DONE 0x00000000
+#define XCHAL_INTTYPE_MASK_IDMA_ERR 0x00000000
+#define XCHAL_INTTYPE_MASK_GS_ERR 0x00000000
+
+/* Interrupt numbers assigned to specific interrupt sources: */
+#define XCHAL_TIMER0_INTERRUPT 6 /* CCOMPARE0 */
+#define XCHAL_TIMER1_INTERRUPT 15 /* CCOMPARE1 */
+#define XCHAL_TIMER2_INTERRUPT 16 /* CCOMPARE2 */
+#define XCHAL_TIMER3_INTERRUPT XTHAL_TIMER_UNCONFIGURED
+#define XCHAL_NMI_INTERRUPT 14 /* non-maskable interrupt */
+#define XCHAL_PROFILING_INTERRUPT 11
+
+/* Interrupt numbers for levels at which only one interrupt is configured: */
+#define XCHAL_INTLEVEL7_NUM 14
+/* (There are many interrupts each at level(s) 1, 2, 3, 4, 5.) */
+
+
+/*
+ * External interrupt mapping.
+ * These macros describe how Xtensa processor interrupt numbers
+ * (as numbered internally, eg. in INTERRUPT and INTENABLE registers)
+ * map to external BInterrupt<n> pins, for those interrupts
+ * configured as external (level-triggered, edge-triggered, or NMI).
+ * See the Xtensa processor databook for more details.
+ */
+
+/* Core interrupt numbers mapped to each EXTERNAL BInterrupt pin number: */
+#define XCHAL_EXTINT0_NUM 0 /* (intlevel 1) */
+#define XCHAL_EXTINT1_NUM 1 /* (intlevel 1) */
+#define XCHAL_EXTINT2_NUM 2 /* (intlevel 1) */
+#define XCHAL_EXTINT3_NUM 3 /* (intlevel 1) */
+#define XCHAL_EXTINT4_NUM 4 /* (intlevel 1) */
+#define XCHAL_EXTINT5_NUM 5 /* (intlevel 1) */
+#define XCHAL_EXTINT6_NUM 8 /* (intlevel 1) */
+#define XCHAL_EXTINT7_NUM 9 /* (intlevel 1) */
+#define XCHAL_EXTINT8_NUM 10 /* (intlevel 1) */
+#define XCHAL_EXTINT9_NUM 12 /* (intlevel 1) */
+#define XCHAL_EXTINT10_NUM 13 /* (intlevel 1) */
+#define XCHAL_EXTINT11_NUM 14 /* (intlevel 7) */
+#define XCHAL_EXTINT12_NUM 17 /* (intlevel 1) */
+#define XCHAL_EXTINT13_NUM 18 /* (intlevel 1) */
+#define XCHAL_EXTINT14_NUM 19 /* (intlevel 2) */
+#define XCHAL_EXTINT15_NUM 20 /* (intlevel 2) */
+#define XCHAL_EXTINT16_NUM 21 /* (intlevel 2) */
+#define XCHAL_EXTINT17_NUM 22 /* (intlevel 3) */
+#define XCHAL_EXTINT18_NUM 23 /* (intlevel 3) */
+#define XCHAL_EXTINT19_NUM 24 /* (intlevel 4) */
+#define XCHAL_EXTINT20_NUM 25 /* (intlevel 4) */
+#define XCHAL_EXTINT21_NUM 26 /* (intlevel 5) */
+#define XCHAL_EXTINT22_NUM 27 /* (intlevel 3) */
+#define XCHAL_EXTINT23_NUM 28 /* (intlevel 4) */
+#define XCHAL_EXTINT24_NUM 30 /* (intlevel 4) */
+#define XCHAL_EXTINT25_NUM 31 /* (intlevel 5) */
+/* EXTERNAL BInterrupt pin numbers mapped to each core interrupt number: */
+#define XCHAL_INT0_EXTNUM 0 /* (intlevel 1) */
+#define XCHAL_INT1_EXTNUM 1 /* (intlevel 1) */
+#define XCHAL_INT2_EXTNUM 2 /* (intlevel 1) */
+#define XCHAL_INT3_EXTNUM 3 /* (intlevel 1) */
+#define XCHAL_INT4_EXTNUM 4 /* (intlevel 1) */
+#define XCHAL_INT5_EXTNUM 5 /* (intlevel 1) */
+#define XCHAL_INT8_EXTNUM 6 /* (intlevel 1) */
+#define XCHAL_INT9_EXTNUM 7 /* (intlevel 1) */
+#define XCHAL_INT10_EXTNUM 8 /* (intlevel 1) */
+#define XCHAL_INT12_EXTNUM 9 /* (intlevel 1) */
+#define XCHAL_INT13_EXTNUM 10 /* (intlevel 1) */
+#define XCHAL_INT14_EXTNUM 11 /* (intlevel 7) */
+#define XCHAL_INT17_EXTNUM 12 /* (intlevel 1) */
+#define XCHAL_INT18_EXTNUM 13 /* (intlevel 1) */
+#define XCHAL_INT19_EXTNUM 14 /* (intlevel 2) */
+#define XCHAL_INT20_EXTNUM 15 /* (intlevel 2) */
+#define XCHAL_INT21_EXTNUM 16 /* (intlevel 2) */
+#define XCHAL_INT22_EXTNUM 17 /* (intlevel 3) */
+#define XCHAL_INT23_EXTNUM 18 /* (intlevel 3) */
+#define XCHAL_INT24_EXTNUM 19 /* (intlevel 4) */
+#define XCHAL_INT25_EXTNUM 20 /* (intlevel 4) */
+#define XCHAL_INT26_EXTNUM 21 /* (intlevel 5) */
+#define XCHAL_INT27_EXTNUM 22 /* (intlevel 3) */
+#define XCHAL_INT28_EXTNUM 23 /* (intlevel 4) */
+#define XCHAL_INT30_EXTNUM 24 /* (intlevel 4) */
+#define XCHAL_INT31_EXTNUM 25 /* (intlevel 5) */
+
+
+/*----------------------------------------------------------------------
+ EXCEPTIONS and VECTORS
+ ----------------------------------------------------------------------*/
+
+#define XCHAL_XEA_VERSION 2 /* Xtensa Exception Architecture
+ number: 1 == XEA1 (old)
+ 2 == XEA2 (new)
+ 0 == XEAX (extern) or TX */
+#define XCHAL_HAVE_XEA1 0 /* Exception Architecture 1 */
+#define XCHAL_HAVE_XEA2 1 /* Exception Architecture 2 */
+#define XCHAL_HAVE_XEAX 0 /* External Exception Arch. */
+#define XCHAL_HAVE_EXCEPTIONS 1 /* exception option */
+#define XCHAL_HAVE_HALT 0 /* halt architecture option */
+#define XCHAL_HAVE_BOOTLOADER 0 /* boot loader (for TX) */
+#define XCHAL_HAVE_MEM_ECC_PARITY 0 /* local memory ECC/parity */
+#define XCHAL_HAVE_VECTOR_SELECT 1 /* relocatable vectors */
+#define XCHAL_HAVE_VECBASE 1 /* relocatable vectors */
+#define XCHAL_VECBASE_RESET_VADDR 0x40000000 /* VECBASE reset value */
+#define XCHAL_VECBASE_RESET_PADDR 0x40000000
+#define XCHAL_RESET_VECBASE_OVERLAP 0
+
+#define XCHAL_RESET_VECTOR0_VADDR 0x50000000
+#define XCHAL_RESET_VECTOR0_PADDR 0x50000000
+#define XCHAL_RESET_VECTOR1_VADDR 0x40000400
+#define XCHAL_RESET_VECTOR1_PADDR 0x40000400
+#define XCHAL_RESET_VECTOR_VADDR 0x40000400
+#define XCHAL_RESET_VECTOR_PADDR 0x40000400
+#define XCHAL_USER_VECOFS 0x00000340
+#define XCHAL_USER_VECTOR_VADDR 0x40000340
+#define XCHAL_USER_VECTOR_PADDR 0x40000340
+#define XCHAL_KERNEL_VECOFS 0x00000300
+#define XCHAL_KERNEL_VECTOR_VADDR 0x40000300
+#define XCHAL_KERNEL_VECTOR_PADDR 0x40000300
+#define XCHAL_DOUBLEEXC_VECOFS 0x000003C0
+#define XCHAL_DOUBLEEXC_VECTOR_VADDR 0x400003C0
+#define XCHAL_DOUBLEEXC_VECTOR_PADDR 0x400003C0
+#define XCHAL_WINDOW_OF4_VECOFS 0x00000000
+#define XCHAL_WINDOW_UF4_VECOFS 0x00000040
+#define XCHAL_WINDOW_OF8_VECOFS 0x00000080
+#define XCHAL_WINDOW_UF8_VECOFS 0x000000C0
+#define XCHAL_WINDOW_OF12_VECOFS 0x00000100
+#define XCHAL_WINDOW_UF12_VECOFS 0x00000140
+#define XCHAL_WINDOW_VECTORS_VADDR 0x40000000
+#define XCHAL_WINDOW_VECTORS_PADDR 0x40000000
+#define XCHAL_INTLEVEL2_VECOFS 0x00000180
+#define XCHAL_INTLEVEL2_VECTOR_VADDR 0x40000180
+#define XCHAL_INTLEVEL2_VECTOR_PADDR 0x40000180
+#define XCHAL_INTLEVEL3_VECOFS 0x000001C0
+#define XCHAL_INTLEVEL3_VECTOR_VADDR 0x400001C0
+#define XCHAL_INTLEVEL3_VECTOR_PADDR 0x400001C0
+#define XCHAL_INTLEVEL4_VECOFS 0x00000200
+#define XCHAL_INTLEVEL4_VECTOR_VADDR 0x40000200
+#define XCHAL_INTLEVEL4_VECTOR_PADDR 0x40000200
+#define XCHAL_INTLEVEL5_VECOFS 0x00000240
+#define XCHAL_INTLEVEL5_VECTOR_VADDR 0x40000240
+#define XCHAL_INTLEVEL5_VECTOR_PADDR 0x40000240
+#define XCHAL_INTLEVEL6_VECOFS 0x00000280
+#define XCHAL_INTLEVEL6_VECTOR_VADDR 0x40000280
+#define XCHAL_INTLEVEL6_VECTOR_PADDR 0x40000280
+#define XCHAL_DEBUG_VECOFS XCHAL_INTLEVEL6_VECOFS
+#define XCHAL_DEBUG_VECTOR_VADDR XCHAL_INTLEVEL6_VECTOR_VADDR
+#define XCHAL_DEBUG_VECTOR_PADDR XCHAL_INTLEVEL6_VECTOR_PADDR
+#define XCHAL_NMI_VECOFS 0x000002C0
+#define XCHAL_NMI_VECTOR_VADDR 0x400002C0
+#define XCHAL_NMI_VECTOR_PADDR 0x400002C0
+#define XCHAL_INTLEVEL7_VECOFS XCHAL_NMI_VECOFS
+#define XCHAL_INTLEVEL7_VECTOR_VADDR XCHAL_NMI_VECTOR_VADDR
+#define XCHAL_INTLEVEL7_VECTOR_PADDR XCHAL_NMI_VECTOR_PADDR
+
+
+/*----------------------------------------------------------------------
+ DEBUG MODULE
+ ----------------------------------------------------------------------*/
+
+/* Misc */
+#define XCHAL_HAVE_DEBUG_ERI 1 /* ERI to debug module */
+#define XCHAL_HAVE_DEBUG_APB 0 /* APB to debug module */
+#define XCHAL_HAVE_DEBUG_JTAG 1 /* JTAG to debug module */
+
+/* On-Chip Debug (OCD) */
+#define XCHAL_HAVE_OCD 1 /* OnChipDebug option */
+#define XCHAL_NUM_IBREAK 2 /* number of IBREAKn regs */
+#define XCHAL_NUM_DBREAK 2 /* number of DBREAKn regs */
+#define XCHAL_HAVE_OCD_DIR_ARRAY 0 /* faster OCD option (to LX4) */
+#define XCHAL_HAVE_OCD_LS32DDR 1 /* L32DDR/S32DDR (faster OCD) */
+
+/* TRAX (in core) */
+#define XCHAL_HAVE_TRAX 1 /* TRAX in debug module */
+#define XCHAL_TRAX_MEM_SIZE 16384 /* TRAX memory size in bytes */
+#define XCHAL_TRAX_MEM_SHAREABLE 1 /* start/end regs; ready sig. */
+#define XCHAL_TRAX_ATB_WIDTH 0 /* ATB width (bits), 0=no ATB */
+#define XCHAL_TRAX_TIME_WIDTH 0 /* timestamp bitwidth, 0=none */
+
+/* Perf counters */
+#define XCHAL_NUM_PERF_COUNTERS 2 /* performance counters */
+
+
+/*----------------------------------------------------------------------
+ MMU
+ ----------------------------------------------------------------------*/
+
+/* See core-matmap.h header file for more details. */
+
+#define XCHAL_HAVE_TLBS 1 /* inverse of HAVE_CACHEATTR */
+#define XCHAL_HAVE_SPANNING_WAY 1 /* one way maps I+D 4GB vaddr */
+#define XCHAL_SPANNING_WAY 0 /* TLB spanning way number */
+#define XCHAL_HAVE_IDENTITY_MAP 1 /* vaddr == paddr always */
+#define XCHAL_HAVE_CACHEATTR 0 /* CACHEATTR register present */
+#define XCHAL_HAVE_MIMIC_CACHEATTR 1 /* region protection */
+#define XCHAL_HAVE_XLT_CACHEATTR 0 /* region prot. w/translation */
+#define XCHAL_HAVE_PTP_MMU 0 /* full MMU (with page table
+ [autorefill] and protection)
+ usable for an MMU-based OS */
+
+/* If none of the above last 5 are set, it's a custom TLB configuration. */
+
+#define XCHAL_MMU_ASID_BITS 0 /* number of bits in ASIDs */
+#define XCHAL_MMU_RINGS 1 /* number of rings (1..4) */
+#define XCHAL_MMU_RING_BITS 0 /* num of bits in RING field */
+
+/*----------------------------------------------------------------------
+ MPU
+ ----------------------------------------------------------------------*/
+#define XCHAL_HAVE_MPU 0
+#define XCHAL_MPU_ENTRIES 0
+
+#define XCHAL_MPU_ALIGN_REQ 1 /* MPU requires alignment of entries to background map */
+#define XCHAL_MPU_BACKGROUND_ENTRIES 0 /* number of entries in bg map*/
+#define XCHAL_MPU_BG_CACHEADRDIS 0 /* default CACHEADRDIS for bg */
+
+#define XCHAL_MPU_ALIGN_BITS 0
+#define XCHAL_MPU_ALIGN 0
+
+#endif /* !XTENSA_HAL_NON_PRIVILEGED_ONLY */
+
+
+#endif /* _XTENSA_CORE_CONFIGURATION_H */
diff --git a/arch/xtensa/variants/esp32s3/include/variant/tie-asm.h b/arch/xtensa/variants/esp32s3/include/variant/tie-asm.h
new file mode 100644
index 000000000000..104dc10fd414
--- /dev/null
+++ b/arch/xtensa/variants/esp32s3/include/variant/tie-asm.h
@@ -0,0 +1,429 @@
+/*
+ * tie-asm.h -- compile-time HAL assembler definitions dependent on CORE & TIE
+ *
+ * NOTE: This header file is not meant to be included directly.
+ */
+
+/* This header file contains assembly-language definitions (assembly
+ macros, etc.) for this specific Xtensa processor's TIE extensions
+ and options. It is customized to this Xtensa processor configuration.
+
+ Customer ID=15128; Build=0x90f1f; Copyright (c) 1999-2021 Cadence Design Systems Inc.
+
+ Permission is hereby granted, free of charge, to any person obtaining
+ a copy of this software and associated documentation files (the
+ "Software"), to deal in the Software without restriction, including
+ without limitation the rights to use, copy, modify, merge, publish,
+ distribute, sublicense, and/or sell copies of the Software, and to
+ permit persons to whom the Software is furnished to do so, subject to
+ the following conditions:
+
+ The above copyright notice and this permission notice shall be included
+ in all copies or substantial portions of the Software.
+
+ THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+ IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY
+ CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
+ TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
+ SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. */
+
+#ifndef _XTENSA_CORE_TIE_ASM_H
+#define _XTENSA_CORE_TIE_ASM_H
+
+/* Selection parameter values for save-area save/restore macros: */
+/* Option vs. TIE: */
+#define XTHAL_SAS_TIE 0x0001 /* custom extension or coprocessor */
+#define XTHAL_SAS_OPT 0x0002 /* optional (and not a coprocessor) */
+#define XTHAL_SAS_ANYOT 0x0003 /* both of the above */
+/* Whether used automatically by compiler: */
+#define XTHAL_SAS_NOCC 0x0004 /* not used by compiler w/o special opts/code */
+#define XTHAL_SAS_CC 0x0008 /* used by compiler without special opts/code */
+#define XTHAL_SAS_ANYCC 0x000C /* both of the above */
+/* ABI handling across function calls: */
+#define XTHAL_SAS_CALR 0x0010 /* caller-saved */
+#define XTHAL_SAS_CALE 0x0020 /* callee-saved */
+#define XTHAL_SAS_GLOB 0x0040 /* global across function calls (in thread) */
+#define XTHAL_SAS_ANYABI 0x0070 /* all of the above three */
+/* Misc */
+#define XTHAL_SAS_ALL 0xFFFF /* include all default NCP contents */
+#define XTHAL_SAS3(optie,ccuse,abi) ( ((optie) & XTHAL_SAS_ANYOT) \
+ | ((ccuse) & XTHAL_SAS_ANYCC) \
+ | ((abi) & XTHAL_SAS_ANYABI) )
+
+
+ /*
+ * Macro to store all non-coprocessor (extra) custom TIE and optional state
+ * (not including zero-overhead loop registers).
+ * Required parameters:
+ * ptr Save area pointer address register (clobbered)
+ * (register must contain a 4 byte aligned address).
+ * at1..at4 Four temporary address registers (first XCHAL_NCP_NUM_ATMPS
+ * registers are clobbered, the remaining are unused).
+ * Optional parameters:
+ * continue If macro invoked as part of a larger store sequence, set to 1
+ * if this is not the first in the sequence. Defaults to 0.
+ * ofs Offset from start of larger sequence (from value of first ptr
+ * in sequence) at which to store. Defaults to next available space
+ * (or 0 if <continue> is 0).
+ * select Select what category(ies) of registers to store, as a bitmask
+ * (see XTHAL_SAS_xxx constants). Defaults to all registers.
+ * alloc Select what category(ies) of registers to allocate; if any
+ * category is selected here that is not in <select>, space for
+ * the corresponding registers is skipped without doing any store.
+ */
+ .macro xchal_ncp_store ptr at1 at2 at3 at4 continue=0 ofs=-1 select=XTHAL_SAS_ALL alloc=0
+ xchal_sa_start \continue, \ofs
+ // Optional global registers used by default by the compiler:
+ .ifeq (XTHAL_SAS_OPT | XTHAL_SAS_CC | XTHAL_SAS_GLOB) & ~(\select)
+ xchal_sa_align \ptr, 0, 1016, 4, 4
+ rur.THREADPTR \at1 // threadptr option
+ s32i \at1, \ptr, .Lxchal_ofs_+0
+ .set .Lxchal_ofs_, .Lxchal_ofs_ + 4
+ .elseif ((XTHAL_SAS_OPT | XTHAL_SAS_CC | XTHAL_SAS_GLOB) & ~(\alloc)) == 0
+ xchal_sa_align \ptr, 0, 1016, 4, 4
+ .set .Lxchal_ofs_, .Lxchal_ofs_ + 4
+ .endif
+ // Optional caller-saved registers used by default by the compiler:
+ .ifeq (XTHAL_SAS_OPT | XTHAL_SAS_CC | XTHAL_SAS_CALR) & ~(\select)
+ xchal_sa_align \ptr, 0, 1012, 4, 4
+ rsr.ACCLO \at1 // MAC16 option
+ s32i \at1, \ptr, .Lxchal_ofs_+0
+ rsr.ACCHI \at1 // MAC16 option
+ s32i \at1, \ptr, .Lxchal_ofs_+4
+ .set .Lxchal_ofs_, .Lxchal_ofs_ + 8
+ .elseif ((XTHAL_SAS_OPT | XTHAL_SAS_CC | XTHAL_SAS_CALR) & ~(\alloc)) == 0
+ xchal_sa_align \ptr, 0, 1012, 4, 4
+ .set .Lxchal_ofs_, .Lxchal_ofs_ + 8
+ .endif
+ // Optional caller-saved registers not used by default by the compiler:
+ .ifeq (XTHAL_SAS_OPT | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~(\select)
+ xchal_sa_align \ptr, 0, 996, 4, 4
+ rsr.BR \at1 // boolean option
+ s32i \at1, \ptr, .Lxchal_ofs_+0
+ rsr.SCOMPARE1 \at1 // conditional store option
+ s32i \at1, \ptr, .Lxchal_ofs_+4
+ rsr.M0 \at1 // MAC16 option
+ s32i \at1, \ptr, .Lxchal_ofs_+8
+ rsr.M1 \at1 // MAC16 option
+ s32i \at1, \ptr, .Lxchal_ofs_+12
+ rsr.M2 \at1 // MAC16 option
+ s32i \at1, \ptr, .Lxchal_ofs_+16
+ rsr.M3 \at1 // MAC16 option
+ s32i \at1, \ptr, .Lxchal_ofs_+20
+ .set .Lxchal_ofs_, .Lxchal_ofs_ + 24
+ .elseif ((XTHAL_SAS_OPT | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~(\alloc)) == 0
+ xchal_sa_align \ptr, 0, 996, 4, 4
+ .set .Lxchal_ofs_, .Lxchal_ofs_ + 24
+ .endif
+ .endm // xchal_ncp_store
+
+ /*
+ * Macro to load all non-coprocessor (extra) custom TIE and optional state
+ * (not including zero-overhead loop registers).
+ * Required parameters:
+ * ptr Save area pointer address register (clobbered)
+ * (register must contain a 4 byte aligned address).
+ * at1..at4 Four temporary address registers (first XCHAL_NCP_NUM_ATMPS
+ * registers are clobbered, the remaining are unused).
+ * Optional parameters:
+ * continue If macro invoked as part of a larger load sequence, set to 1
+ * if this is not the first in the sequence. Defaults to 0.
+ * ofs Offset from start of larger sequence (from value of first ptr
+ * in sequence) at which to load. Defaults to next available space
+ * (or 0 if <continue> is 0).
+ * select Select what category(ies) of registers to load, as a bitmask
+ * (see XTHAL_SAS_xxx constants). Defaults to all registers.
+ * alloc Select what category(ies) of registers to allocate; if any
+ * category is selected here that is not in <select>, space for
+ * the corresponding registers is skipped without doing any load.
+ */
+ .macro xchal_ncp_load ptr at1 at2 at3 at4 continue=0 ofs=-1 select=XTHAL_SAS_ALL alloc=0
+ xchal_sa_start \continue, \ofs
+ // Optional global registers used by default by the compiler:
+ .ifeq (XTHAL_SAS_OPT | XTHAL_SAS_CC | XTHAL_SAS_GLOB) & ~(\select)
+ xchal_sa_align \ptr, 0, 1016, 4, 4
+ l32i \at1, \ptr, .Lxchal_ofs_+0
+ wur.THREADPTR \at1 // threadptr option
+ .set .Lxchal_ofs_, .Lxchal_ofs_ + 4
+ .elseif ((XTHAL_SAS_OPT | XTHAL_SAS_CC | XTHAL_SAS_GLOB) & ~(\alloc)) == 0
+ xchal_sa_align \ptr, 0, 1016, 4, 4
+ .set .Lxchal_ofs_, .Lxchal_ofs_ + 4
+ .endif
+ // Optional caller-saved registers used by default by the compiler:
+ .ifeq (XTHAL_SAS_OPT | XTHAL_SAS_CC | XTHAL_SAS_CALR) & ~(\select)
+ xchal_sa_align \ptr, 0, 1012, 4, 4
+ l32i \at1, \ptr, .Lxchal_ofs_+0
+ wsr.ACCLO \at1 // MAC16 option
+ l32i \at1, \ptr, .Lxchal_ofs_+4
+ wsr.ACCHI \at1 // MAC16 option
+ .set .Lxchal_ofs_, .Lxchal_ofs_ + 8
+ .elseif ((XTHAL_SAS_OPT | XTHAL_SAS_CC | XTHAL_SAS_CALR) & ~(\alloc)) == 0
+ xchal_sa_align \ptr, 0, 1012, 4, 4
+ .set .Lxchal_ofs_, .Lxchal_ofs_ + 8
+ .endif
+ // Optional caller-saved registers not used by default by the compiler:
+ .ifeq (XTHAL_SAS_OPT | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~(\select)
+ xchal_sa_align \ptr, 0, 996, 4, 4
+ l32i \at1, \ptr, .Lxchal_ofs_+0
+ wsr.BR \at1 // boolean option
+ l32i \at1, \ptr, .Lxchal_ofs_+4
+ wsr.SCOMPARE1 \at1 // conditional store option
+ l32i \at1, \ptr, .Lxchal_ofs_+8
+ wsr.M0 \at1 // MAC16 option
+ l32i \at1, \ptr, .Lxchal_ofs_+12
+ wsr.M1 \at1 // MAC16 option
+ l32i \at1, \ptr, .Lxchal_ofs_+16
+ wsr.M2 \at1 // MAC16 option
+ l32i \at1, \ptr, .Lxchal_ofs_+20
+ wsr.M3 \at1 // MAC16 option
+ .set .Lxchal_ofs_, .Lxchal_ofs_ + 24
+ .elseif ((XTHAL_SAS_OPT | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~(\alloc)) == 0
+ xchal_sa_align \ptr, 0, 996, 4, 4
+ .set .Lxchal_ofs_, .Lxchal_ofs_ + 24
+ .endif
+ .endm // xchal_ncp_load
+
+
+#define XCHAL_NCP_NUM_ATMPS 1
+
+ /*
+ * Macro to store the state of TIE coprocessor FPU.
+ * Required parameters:
+ * ptr Save area pointer address register (clobbered)
+ * (register must contain a 4 byte aligned address).
+ * at1..at4 Four temporary address registers (first XCHAL_CP0_NUM_ATMPS
+ * registers are clobbered, the remaining are unused).
+ * Optional parameters are the same as for xchal_ncp_store.
+ */
+#define xchal_cp_FPU_store xchal_cp0_store
+ .macro xchal_cp0_store ptr at1 at2 at3 at4 continue=0 ofs=-1 select=XTHAL_SAS_ALL alloc=0
+ xchal_sa_start \continue, \ofs
+ // Custom caller-saved registers not used by default by the compiler:
+ .ifeq (XTHAL_SAS_TIE | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~(\select)
+ xchal_sa_align \ptr, 0, 948, 4, 4
+ rur.FCR \at1 // ureg 232
+ s32i \at1, \ptr, .Lxchal_ofs_+0
+ rur.FSR \at1 // ureg 233
+ s32i \at1, \ptr, .Lxchal_ofs_+4
+ ssi f0, \ptr, .Lxchal_ofs_+8
+ ssi f1, \ptr, .Lxchal_ofs_+12
+ ssi f2, \ptr, .Lxchal_ofs_+16
+ ssi f3, \ptr, .Lxchal_ofs_+20
+ ssi f4, \ptr, .Lxchal_ofs_+24
+ ssi f5, \ptr, .Lxchal_ofs_+28
+ ssi f6, \ptr, .Lxchal_ofs_+32
+ ssi f7, \ptr, .Lxchal_ofs_+36
+ ssi f8, \ptr, .Lxchal_ofs_+40
+ ssi f9, \ptr, .Lxchal_ofs_+44
+ ssi f10, \ptr, .Lxchal_ofs_+48
+ ssi f11, \ptr, .Lxchal_ofs_+52
+ ssi f12, \ptr, .Lxchal_ofs_+56
+ ssi f13, \ptr, .Lxchal_ofs_+60
+ ssi f14, \ptr, .Lxchal_ofs_+64
+ ssi f15, \ptr, .Lxchal_ofs_+68
+ .set .Lxchal_ofs_, .Lxchal_ofs_ + 72
+ .elseif ((XTHAL_SAS_TIE | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~(\alloc)) == 0
+ xchal_sa_align \ptr, 0, 948, 4, 4
+ .set .Lxchal_ofs_, .Lxchal_ofs_ + 72
+ .endif
+ .endm // xchal_cp0_store
+
+ /*
+ * Macro to load the state of TIE coprocessor FPU.
+ * Required parameters:
+ * ptr Save area pointer address register (clobbered)
+ * (register must contain a 4 byte aligned address).
+ * at1..at4 Four temporary address registers (first XCHAL_CP0_NUM_ATMPS
+ * registers are clobbered, the remaining are unused).
+ * Optional parameters are the same as for xchal_ncp_load.
+ */
+#define xchal_cp_FPU_load xchal_cp0_load
+ .macro xchal_cp0_load ptr at1 at2 at3 at4 continue=0 ofs=-1 select=XTHAL_SAS_ALL alloc=0
+ xchal_sa_start \continue, \ofs
+ // Custom caller-saved registers not used by default by the compiler:
+ .ifeq (XTHAL_SAS_TIE | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~(\select)
+ xchal_sa_align \ptr, 0, 948, 4, 4
+ l32i \at1, \ptr, .Lxchal_ofs_+0
+ wur.FCR \at1 // ureg 232
+ l32i \at1, \ptr, .Lxchal_ofs_+4
+ wur.FSR \at1 // ureg 233
+ lsi f0, \ptr, .Lxchal_ofs_+8
+ lsi f1, \ptr, .Lxchal_ofs_+12
+ lsi f2, \ptr, .Lxchal_ofs_+16
+ lsi f3, \ptr, .Lxchal_ofs_+20
+ lsi f4, \ptr, .Lxchal_ofs_+24
+ lsi f5, \ptr, .Lxchal_ofs_+28
+ lsi f6, \ptr, .Lxchal_ofs_+32
+ lsi f7, \ptr, .Lxchal_ofs_+36
+ lsi f8, \ptr, .Lxchal_ofs_+40
+ lsi f9, \ptr, .Lxchal_ofs_+44
+ lsi f10, \ptr, .Lxchal_ofs_+48
+ lsi f11, \ptr, .Lxchal_ofs_+52
+ lsi f12, \ptr, .Lxchal_ofs_+56
+ lsi f13, \ptr, .Lxchal_ofs_+60
+ lsi f14, \ptr, .Lxchal_ofs_+64
+ lsi f15, \ptr, .Lxchal_ofs_+68
+ .set .Lxchal_ofs_, .Lxchal_ofs_ + 72
+ .elseif ((XTHAL_SAS_TIE | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~(\alloc)) == 0
+ xchal_sa_align \ptr, 0, 948, 4, 4
+ .set .Lxchal_ofs_, .Lxchal_ofs_ + 72
+ .endif
+ .endm // xchal_cp0_load
+
+#define XCHAL_CP0_NUM_ATMPS 1
+ /*
+ * Macro to store the state of TIE coprocessor cop_ai.
+ * Required parameters:
+ * ptr Save area pointer address register (clobbered)
+ * (register must contain a 16 byte aligned address).
+ * at1..at4 Four temporary address registers (first XCHAL_CP3_NUM_ATMPS
+ * registers are clobbered, the remaining are unused).
+ * Optional parameters are the same as for xchal_ncp_store.
+ */
+#define xchal_cp_cop_ai_store xchal_cp3_store
+ .macro xchal_cp3_store ptr at1 at2 at3 at4 continue=0 ofs=-1 select=XTHAL_SAS_ALL alloc=0
+ xchal_sa_start \continue, \ofs
+ // Custom caller-saved registers not used by default by the compiler:
+ .ifeq (XTHAL_SAS_TIE | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~(\select)
+ xchal_sa_align \ptr, 0, 0, 16, 16
+ rur.ACCX_0 \at1 // ureg 0
+ s32i \at1, \ptr, .Lxchal_ofs_+0
+ rur.ACCX_1 \at1 // ureg 1
+ s32i \at1, \ptr, .Lxchal_ofs_+4
+ rur.QACC_H_0 \at1 // ureg 2
+ s32i \at1, \ptr, .Lxchal_ofs_+8
+ rur.QACC_H_1 \at1 // ureg 3
+ s32i \at1, \ptr, .Lxchal_ofs_+12
+ rur.QACC_H_2 \at1 // ureg 4
+ s32i \at1, \ptr, .Lxchal_ofs_+16
+ rur.QACC_H_3 \at1 // ureg 5
+ s32i \at1, \ptr, .Lxchal_ofs_+20
+ rur.QACC_H_4 \at1 // ureg 6
+ s32i \at1, \ptr, .Lxchal_ofs_+24
+ rur.QACC_L_0 \at1 // ureg 7
+ s32i \at1, \ptr, .Lxchal_ofs_+28
+ rur.QACC_L_1 \at1 // ureg 8
+ s32i \at1, \ptr, .Lxchal_ofs_+32
+ rur.QACC_L_2 \at1 // ureg 9
+ s32i \at1, \ptr, .Lxchal_ofs_+36
+ rur.QACC_L_3 \at1 // ureg 10
+ s32i \at1, \ptr, .Lxchal_ofs_+40
+ rur.QACC_L_4 \at1 // ureg 11
+ s32i \at1, \ptr, .Lxchal_ofs_+44
+ rur.SAR_BYTE \at1 // ureg 13
+ s32i \at1, \ptr, .Lxchal_ofs_+48
+ rur.FFT_BIT_WIDTH \at1 // ureg 14
+ s32i \at1, \ptr, .Lxchal_ofs_+52
+ rur.UA_STATE_0 \at1 // ureg 15
+ s32i \at1, \ptr, .Lxchal_ofs_+56
+ rur.UA_STATE_1 \at1 // ureg 16
+ s32i \at1, \ptr, .Lxchal_ofs_+60
+ rur.UA_STATE_2 \at1 // ureg 17
+ s32i \at1, \ptr, .Lxchal_ofs_+64
+ rur.UA_STATE_3 \at1 // ureg 18
+ s32i \at1, \ptr, .Lxchal_ofs_+68
+ st.qr q0, \ptr, .Lxchal_ofs_+80
+ st.qr q1, \ptr, .Lxchal_ofs_+96
+ st.qr q2, \ptr, .Lxchal_ofs_+112
+ addi \ptr, \ptr, 128
+ st.qr q3, \ptr, .Lxchal_ofs_+0
+ st.qr q4, \ptr, .Lxchal_ofs_+16
+ st.qr q5, \ptr, .Lxchal_ofs_+32
+ st.qr q6, \ptr, .Lxchal_ofs_+48
+ st.qr q7, \ptr, .Lxchal_ofs_+64
+ .set .Lxchal_pofs_, .Lxchal_pofs_ + 128
+ .set .Lxchal_ofs_, .Lxchal_ofs_ + 80
+ .elseif ((XTHAL_SAS_TIE | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~(\alloc)) == 0
+ xchal_sa_align \ptr, 0, 0, 16, 16
+ .set .Lxchal_ofs_, .Lxchal_ofs_ + 208
+ .endif
+ .endm // xchal_cp3_store
+
+ /*
+ * Macro to load the state of TIE coprocessor cop_ai.
+ * Required parameters:
+ * ptr Save area pointer address register (clobbered)
+ * (register must contain a 16 byte aligned address).
+ * at1..at4 Four temporary address registers (first XCHAL_CP3_NUM_ATMPS
+ * registers are clobbered, the remaining are unused).
+ * Optional parameters are the same as for xchal_ncp_load.
+ */
+#define xchal_cp_cop_ai_load xchal_cp3_load
+ .macro xchal_cp3_load ptr at1 at2 at3 at4 continue=0 ofs=-1 select=XTHAL_SAS_ALL alloc=0
+ xchal_sa_start \continue, \ofs
+ // Custom caller-saved registers not used by default by the compiler:
+ .ifeq (XTHAL_SAS_TIE | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~(\select)
+ xchal_sa_align \ptr, 0, 0, 16, 16
+ l32i \at1, \ptr, .Lxchal_ofs_+0
+ wur.ACCX_0 \at1 // ureg 0
+ l32i \at1, \ptr, .Lxchal_ofs_+4
+ wur.ACCX_1 \at1 // ureg 1
+ l32i \at1, \ptr, .Lxchal_ofs_+8
+ wur.QACC_H_0 \at1 // ureg 2
+ l32i \at1, \ptr, .Lxchal_ofs_+12
+ wur.QACC_H_1 \at1 // ureg 3
+ l32i \at1, \ptr, .Lxchal_ofs_+16
+ wur.QACC_H_2 \at1 // ureg 4
+ l32i \at1, \ptr, .Lxchal_ofs_+20
+ wur.QACC_H_3 \at1 // ureg 5
+ l32i \at1, \ptr, .Lxchal_ofs_+24
+ wur.QACC_H_4 \at1 // ureg 6
+ l32i \at1, \ptr, .Lxchal_ofs_+28
+ wur.QACC_L_0 \at1 // ureg 7
+ l32i \at1, \ptr, .Lxchal_ofs_+32
+ wur.QACC_L_1 \at1 // ureg 8
+ l32i \at1, \ptr, .Lxchal_ofs_+36
+ wur.QACC_L_2 \at1 // ureg 9
+ l32i \at1, \ptr, .Lxchal_ofs_+40
+ wur.QACC_L_3 \at1 // ureg 10
+ l32i \at1, \ptr, .Lxchal_ofs_+44
+ wur.QACC_L_4 \at1 // ureg 11
+ l32i \at1, \ptr, .Lxchal_ofs_+48
+ wur.SAR_BYTE \at1 // ureg 13
+ l32i \at1, \ptr, .Lxchal_ofs_+52
+ wur.FFT_BIT_WIDTH \at1 // ureg 14
+ l32i \at1, \ptr, .Lxchal_ofs_+56
+ wur.UA_STATE_0 \at1 // ureg 15
+ l32i \at1, \ptr, .Lxchal_ofs_+60
+ wur.UA_STATE_1 \at1 // ureg 16
+ l32i \at1, \ptr, .Lxchal_ofs_+64
+ wur.UA_STATE_2 \at1 // ureg 17
+ l32i \at1, \ptr, .Lxchal_ofs_+68
+ wur.UA_STATE_3 \at1 // ureg 18
+ ld.qr q0, \ptr, .Lxchal_ofs_+80
+ ld.qr q1, \ptr, .Lxchal_ofs_+96
+ ld.qr q2, \ptr, .Lxchal_ofs_+112
+ addi \ptr, \ptr, 128
+ ld.qr q3, \ptr, .Lxchal_ofs_+0
+ ld.qr q4, \ptr, .Lxchal_ofs_+16
+ ld.qr q5, \ptr, .Lxchal_ofs_+32
+ ld.qr q6, \ptr, .Lxchal_ofs_+48
+ ld.qr q7, \ptr, .Lxchal_ofs_+64
+ .set .Lxchal_pofs_, .Lxchal_pofs_ + 128
+ .set .Lxchal_ofs_, .Lxchal_ofs_ + 80
+ .elseif ((XTHAL_SAS_TIE | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~(\alloc)) == 0
+ xchal_sa_align \ptr, 0, 0, 16, 16
+ .set .Lxchal_ofs_, .Lxchal_ofs_ + 208
+ .endif
+ .endm // xchal_cp3_load
+
+#define XCHAL_CP3_NUM_ATMPS 1
+#define XCHAL_SA_NUM_ATMPS 1
+
+ /* Empty macros for unconfigured coprocessors: */
+ .macro xchal_cp1_store p a b c d continue=0 ofs=-1 select=-1 ; .endm
+ .macro xchal_cp1_load p a b c d continue=0 ofs=-1 select=-1 ; .endm
+ .macro xchal_cp2_store p a b c d continue=0 ofs=-1 select=-1 ; .endm
+ .macro xchal_cp2_load p a b c d continue=0 ofs=-1 select=-1 ; .endm
+ .macro xchal_cp4_store p a b c d continue=0 ofs=-1 select=-1 ; .endm
+ .macro xchal_cp4_load p a b c d continue=0 ofs=-1 select=-1 ; .endm
+ .macro xchal_cp5_store p a b c d continue=0 ofs=-1 select=-1 ; .endm
+ .macro xchal_cp5_load p a b c d continue=0 ofs=-1 select=-1 ; .endm
+ .macro xchal_cp6_store p a b c d continue=0 ofs=-1 select=-1 ; .endm
+ .macro xchal_cp6_load p a b c d continue=0 ofs=-1 select=-1 ; .endm
+ .macro xchal_cp7_store p a b c d continue=0 ofs=-1 select=-1 ; .endm
+ .macro xchal_cp7_load p a b c d continue=0 ofs=-1 select=-1 ; .endm
+
+#endif /*_XTENSA_CORE_TIE_ASM_H*/
diff --git a/arch/xtensa/variants/esp32s3/include/variant/tie.h b/arch/xtensa/variants/esp32s3/include/variant/tie.h
new file mode 100644
index 000000000000..e7671b1979e4
--- /dev/null
+++ b/arch/xtensa/variants/esp32s3/include/variant/tie.h
@@ -0,0 +1,207 @@
+/*
+ * tie.h -- compile-time HAL definitions dependent on CORE & TIE configuration
+ *
+ * NOTE: This header file is not meant to be included directly.
+ */
+
+/* This header file describes this specific Xtensa processor's TIE extensions
+ that extend basic Xtensa core functionality. It is customized to this
+ Xtensa processor configuration.
+
+ Customer ID=15128; Build=0x90f1f; Copyright (c) 1999-2021 Cadence Design Systems Inc.
+
+ Permission is hereby granted, free of charge, to any person obtaining
+ a copy of this software and associated documentation files (the
+ "Software"), to deal in the Software without restriction, including
+ without limitation the rights to use, copy, modify, merge, publish,
+ distribute, sublicense, and/or sell copies of the Software, and to
+ permit persons to whom the Software is furnished to do so, subject to
+ the following conditions:
+
+ The above copyright notice and this permission notice shall be included
+ in all copies or substantial portions of the Software.
+
+ THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+ IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY
+ CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
+ TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
+ SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. */
+
+#ifndef _XTENSA_CORE_TIE_H
+#define _XTENSA_CORE_TIE_H
+
+#define XCHAL_CP_NUM 2 /* number of coprocessors */
+#define XCHAL_CP_MAX 4 /* max CP ID + 1 (0 if none) */
+#define XCHAL_CP_MASK 0x09 /* bitmask of all CPs by ID */
+#define XCHAL_CP_PORT_MASK 0x00 /* bitmask of only port CPs */
+
+/* Basic parameters of each coprocessor: */
+#define XCHAL_CP0_NAME "FPU"
+#define XCHAL_CP0_IDENT FPU
+#define XCHAL_CP0_SA_SIZE 72 /* size of state save area */
+#define XCHAL_CP0_SA_ALIGN 4 /* min alignment of save area */
+#define XCHAL_CP_ID_FPU 0 /* coprocessor ID (0..7) */
+#define XCHAL_CP3_NAME "cop_ai"
+#define XCHAL_CP3_IDENT cop_ai
+#define XCHAL_CP3_SA_SIZE 208 /* size of state save area */
+#define XCHAL_CP3_SA_ALIGN 16 /* min alignment of save area */
+#define XCHAL_CP_ID_COP_AI 3 /* coprocessor ID (0..7) */
+
+/* Filler info for unassigned coprocessors, to simplify arrays etc: */
+#define XCHAL_CP1_SA_SIZE 0
+#define XCHAL_CP1_SA_ALIGN 1
+#define XCHAL_CP2_SA_SIZE 0
+#define XCHAL_CP2_SA_ALIGN 1
+#define XCHAL_CP4_SA_SIZE 0
+#define XCHAL_CP4_SA_ALIGN 1
+#define XCHAL_CP5_SA_SIZE 0
+#define XCHAL_CP5_SA_ALIGN 1
+#define XCHAL_CP6_SA_SIZE 0
+#define XCHAL_CP6_SA_ALIGN 1
+#define XCHAL_CP7_SA_SIZE 0
+#define XCHAL_CP7_SA_ALIGN 1
+
+/* Save area for non-coprocessor optional and custom (TIE) state: */
+#define XCHAL_NCP_SA_SIZE 36
+#define XCHAL_NCP_SA_ALIGN 4
+
+/* Total save area for optional and custom state (NCP + CPn): */
+#define XCHAL_TOTAL_SA_SIZE 336 /* with 16-byte align padding */
+#define XCHAL_TOTAL_SA_ALIGN 16 /* actual minimum alignment */
+
+/*
+ * Detailed contents of save areas.
+ * NOTE: caller must define the XCHAL_SA_REG macro (not defined here)
+ * before expanding the XCHAL_xxx_SA_LIST() macros.
+ *
+ * XCHAL_SA_REG(s,ccused,abikind,kind,opt,name,galign,align,asize,
+ * dbnum,base,regnum,bitsz,gapsz,reset,x...)
+ *
+ * s = passed from XCHAL_*_LIST(s), eg. to select how to expand
+ * ccused = set if used by compiler without special options or code
+ * abikind = 0 (caller-saved), 1 (callee-saved), or 2 (thread-global)
+ * kind = 0 (special reg), 1 (TIE user reg), or 2 (TIE regfile reg)
+ * opt = 0 (custom TIE extension or coprocessor), or 1 (optional reg)
+ * name = lowercase reg name (no quotes)
+ * galign = group byte alignment (power of 2) (galign >= align)
+ * align = register byte alignment (power of 2)
+ * asize = allocated size in bytes (asize*8 == bitsz + gapsz + padsz)
+ * (not including any pad bytes required to galign this or next reg)
+ * dbnum = unique target number f/debug (see <xtensa-libdb-macros.h>)
+ * base = reg shortname w/o index (or sr=special, ur=TIE user reg)
+ * regnum = reg index in regfile, or special/TIE-user reg number
+ * bitsz = number of significant bits (regfile width, or ur/sr mask bits)
+ * gapsz = intervening bits, if bitsz bits not stored contiguously
+ * (padsz = pad bits at end [TIE regfile] or at msbits [ur,sr] of asize)
+ * reset = register reset value (or 0 if undefined at reset)
+ * x = reserved for future use (0 until then)
+ *
+ * To filter out certain registers, e.g. to expand only the non-global
+ * registers used by the compiler, you can do something like this:
+ *
+ * #define XCHAL_SA_REG(s,ccused,p...) SELCC##ccused(p)
+ * #define SELCC0(p...)
+ * #define SELCC1(abikind,p...) SELAK##abikind(p)
+ * #define SELAK0(p...) REG(p)
+ * #define SELAK1(p...) REG(p)
+ * #define SELAK2(p...)
+ * #define REG(kind,tie,name,galn,aln,asz,csz,dbnum,base,rnum,bsz,rst,x...) \
+ * ...what you want to expand...
+ */
+
+#define XCHAL_NCP_SA_NUM 9
+#define XCHAL_NCP_SA_LIST(s) \
+ XCHAL_SA_REG(s,1,2,1,1, threadptr, 4, 4, 4,0x03E7, ur,231, 32,0,0,0) \
+ XCHAL_SA_REG(s,1,0,0,1, acclo, 4, 4, 4,0x0210, sr,16 , 32,0,0,0) \
+ XCHAL_SA_REG(s,1,0,0,1, acchi, 4, 4, 4,0x0211, sr,17 , 8,0,0,0) \
+ XCHAL_SA_REG(s,0,0,0,1, br, 4, 4, 4,0x0204, sr,4 , 16,0,0,0) \
+ XCHAL_SA_REG(s,0,0,0,1, scompare1, 4, 4, 4,0x020C, sr,12 , 32,0,0,0) \
+ XCHAL_SA_REG(s,0,0,0,1, m0, 4, 4, 4,0x0220, sr,32 , 32,0,0,0) \
+ XCHAL_SA_REG(s,0,0,0,1, m1, 4, 4, 4,0x0221, sr,33 , 32,0,0,0) \
+ XCHAL_SA_REG(s,0,0,0,1, m2, 4, 4, 4,0x0222, sr,34 , 32,0,0,0) \
+ XCHAL_SA_REG(s,0,0,0,1, m3, 4, 4, 4,0x0223, sr,35 , 32,0,0,0)
+
+#define XCHAL_CP0_SA_NUM 18
+#define XCHAL_CP0_SA_LIST(s) \
+ XCHAL_SA_REG(s,0,0,1,0, fcr, 4, 4, 4,0x03E8, ur,232, 32,0,0,0) \
+ XCHAL_SA_REG(s,0,0,1,0, fsr, 4, 4, 4,0x03E9, ur,233, 32,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0, f0, 4, 4, 4,0x0030, f,0 , 32,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0, f1, 4, 4, 4,0x0031, f,1 , 32,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0, f2, 4, 4, 4,0x0032, f,2 , 32,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0, f3, 4, 4, 4,0x0033, f,3 , 32,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0, f4, 4, 4, 4,0x0034, f,4 , 32,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0, f5, 4, 4, 4,0x0035, f,5 , 32,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0, f6, 4, 4, 4,0x0036, f,6 , 32,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0, f7, 4, 4, 4,0x0037, f,7 , 32,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0, f8, 4, 4, 4,0x0038, f,8 , 32,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0, f9, 4, 4, 4,0x0039, f,9 , 32,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0, f10, 4, 4, 4,0x003A, f,10 , 32,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0, f11, 4, 4, 4,0x003B, f,11 , 32,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0, f12, 4, 4, 4,0x003C, f,12 , 32,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0, f13, 4, 4, 4,0x003D, f,13 , 32,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0, f14, 4, 4, 4,0x003E, f,14 , 32,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0, f15, 4, 4, 4,0x003F, f,15 , 32,0,0,0)
+
+#define XCHAL_CP1_SA_NUM 0
+#define XCHAL_CP1_SA_LIST(s) /* empty */
+
+#define XCHAL_CP2_SA_NUM 0
+#define XCHAL_CP2_SA_LIST(s) /* empty */
+
+#define XCHAL_CP3_SA_NUM 26
+#define XCHAL_CP3_SA_LIST(s) \
+ XCHAL_SA_REG(s,0,0,1,0, accx_0,16, 4, 4,0x0300, ur,0 , 32,0,0,0) \
+ XCHAL_SA_REG(s,0,0,1,0, accx_1, 4, 4, 4,0x0301, ur,1 , 8,0,0,0) \
+ XCHAL_SA_REG(s,0,0,1,0, qacc_h_0, 4, 4, 4,0x0302, ur,2 , 32,0,0,0) \
+ XCHAL_SA_REG(s,0,0,1,0, qacc_h_1, 4, 4, 4,0x0303, ur,3 , 32,0,0,0) \
+ XCHAL_SA_REG(s,0,0,1,0, qacc_h_2, 4, 4, 4,0x0304, ur,4 , 32,0,0,0) \
+ XCHAL_SA_REG(s,0,0,1,0, qacc_h_3, 4, 4, 4,0x0305, ur,5 , 32,0,0,0) \
+ XCHAL_SA_REG(s,0,0,1,0, qacc_h_4, 4, 4, 4,0x0306, ur,6 , 32,0,0,0) \
+ XCHAL_SA_REG(s,0,0,1,0, qacc_l_0, 4, 4, 4,0x0307, ur,7 , 32,0,0,0) \
+ XCHAL_SA_REG(s,0,0,1,0, qacc_l_1, 4, 4, 4,0x0308, ur,8 , 32,0,0,0) \
+ XCHAL_SA_REG(s,0,0,1,0, qacc_l_2, 4, 4, 4,0x0309, ur,9 , 32,0,0,0) \
+ XCHAL_SA_REG(s,0,0,1,0, qacc_l_3, 4, 4, 4,0x030A, ur,10 , 32,0,0,0) \
+ XCHAL_SA_REG(s,0,0,1,0, qacc_l_4, 4, 4, 4,0x030B, ur,11 , 32,0,0,0) \
+ XCHAL_SA_REG(s,0,0,1,0, sar_byte, 4, 4, 4,0x030D, ur,13 , 4,0,0,0) \
+ XCHAL_SA_REG(s,0,0,1,0, fft_bit_width, 4, 4, 4,0x030E, ur,14 , 4,0,0,0) \
+ XCHAL_SA_REG(s,0,0,1,0, ua_state_0, 4, 4, 4,0x030F, ur,15 , 32,0,0,0) \
+ XCHAL_SA_REG(s,0,0,1,0, ua_state_1, 4, 4, 4,0x0310, ur,16 , 32,0,0,0) \
+ XCHAL_SA_REG(s,0,0,1,0, ua_state_2, 4, 4, 4,0x0311, ur,17 , 32,0,0,0) \
+ XCHAL_SA_REG(s,0,0,1,0, ua_state_3, 4, 4, 4,0x0312, ur,18 , 32,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0, q0,16,16,16,0x1008, q,0 ,128,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0, q1,16,16,16,0x1009, q,1 ,128,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0, q2,16,16,16,0x100A, q,2 ,128,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0, q3,16,16,16,0x100B, q,3 ,128,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0, q4,16,16,16,0x100C, q,4 ,128,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0, q5,16,16,16,0x100D, q,5 ,128,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0, q6,16,16,16,0x100E, q,6 ,128,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0, q7,16,16,16,0x100F, q,7 ,128,0,0,0)
+
+#define XCHAL_CP4_SA_NUM 0
+#define XCHAL_CP4_SA_LIST(s) /* empty */
+
+#define XCHAL_CP5_SA_NUM 0
+#define XCHAL_CP5_SA_LIST(s) /* empty */
+
+#define XCHAL_CP6_SA_NUM 0
+#define XCHAL_CP6_SA_LIST(s) /* empty */
+
+#define XCHAL_CP7_SA_NUM 0
+#define XCHAL_CP7_SA_LIST(s) /* empty */
+
+/* Byte length of instruction from its first nibble (op0 field), per FLIX. */
+#define XCHAL_OP0_FORMAT_LENGTHS 3,3,3,3,3,3,3,3,2,2,2,2,2,2,4,4
+/* Byte length of instruction from its first byte, per FLIX. */
+#define XCHAL_BYTE0_FORMAT_LENGTHS \
+ 3,3,3,3,3,3,3,3,2,2,2,2,2,2,4,4, 3,3,3,3,3,3,3,3,2,2,2,2,2,2,4,4,\
+ 3,3,3,3,3,3,3,3,2,2,2,2,2,2,4,4, 3,3,3,3,3,3,3,3,2,2,2,2,2,2,4,4,\
+ 3,3,3,3,3,3,3,3,2,2,2,2,2,2,4,4, 3,3,3,3,3,3,3,3,2,2,2,2,2,2,4,4,\
+ 3,3,3,3,3,3,3,3,2,2,2,2,2,2,4,4, 3,3,3,3,3,3,3,3,2,2,2,2,2,2,4,4,\
+ 3,3,3,3,3,3,3,3,2,2,2,2,2,2,4,4, 3,3,3,3,3,3,3,3,2,2,2,2,2,2,4,4,\
+ 3,3,3,3,3,3,3,3,2,2,2,2,2,2,4,4, 3,3,3,3,3,3,3,3,2,2,2,2,2,2,4,4,\
+ 3,3,3,3,3,3,3,3,2,2,2,2,2,2,4,4, 3,3,3,3,3,3,3,3,2,2,2,2,2,2,4,4,\
+ 3,3,3,3,3,3,3,3,2,2,2,2,2,2,4,4, 3,3,3,3,3,3,3,3,2,2,2,2,2,2,4,4
+
+#endif /*_XTENSA_CORE_TIE_H*/
--
2.30.2