2023-09-14 08:02:41

by Matyas, Daniel

[permalink] [raw]
Subject: [PATCH v3 4/5] hwmon: max31827: Add support for max31828 and max31829

When adi,flt-q and/or adi,alrm-pol are not mentioned,
the default configuration is loaded.

Signed-off-by: Daniel Matyas <[email protected]>
---

v3: Added patch.

drivers/hwmon/max31827.c | 68 +++++++++++++++++++++++++++++++++-------
1 file changed, 57 insertions(+), 11 deletions(-)

diff --git a/drivers/hwmon/max31827.c b/drivers/hwmon/max31827.c
index 41c440b8a474..1f29a1f5759d 100644
--- a/drivers/hwmon/max31827.c
+++ b/drivers/hwmon/max31827.c
@@ -46,12 +46,17 @@
#define MAX31827_12_BIT_CNV_TIME 140

#define MAX31827_ALRM_POL_LOW 0x0
+#define MAX31827_ALRM_POL_HIGH 0x1
+
#define MAX31827_FLT_Q_1 0x0
+#define MAX31827_FLT_Q_4 0x2

#define MAX31827_16_BIT_TO_M_DGR(x) (sign_extend32(x, 15) * 1000 / 16)
#define MAX31827_M_DGR_TO_16_BIT(x) (((x) << 4) / 1000)
#define MAX31827_DEVICE_ENABLE(x) ((x) ? 0xA : 0x0)

+enum chips { max31827, max31828, max31829 };
+
enum max31827_cnv {
MAX31827_CNV_1_DIV_64_HZ = 1,
MAX31827_CNV_1_DIV_32_HZ,
@@ -383,12 +388,21 @@ static int max31827_write(struct device *dev, enum hwmon_sensor_types type,
return -EOPNOTSUPP;
}

+static const struct i2c_device_id max31827_i2c_ids[] = {
+ { "max31827", max31827 },
+ { "max31828", max31828 },
+ { "max31829", max31829 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, max31827_i2c_ids);
+
static int max31827_init_client(struct max31827_state *st,
struct fwnode_handle *fwnode)
{
bool prop;
u32 data, lsb_idx;
unsigned int res = 0;
+ enum chips type;
int ret;

st->enable = true;
@@ -402,6 +416,11 @@ static int max31827_init_client(struct max31827_state *st,
prop = fwnode_property_read_bool(fwnode, "adi,timeout-enable");
res |= FIELD_PREP(MAX31827_CONFIGURATION_TIMEOUT_MASK, !prop);

+ if (st->client->dev.of_node)
+ type = (enum chips)of_device_get_match_data(&st->client->dev);
+ else
+ type = i2c_match_id(max31827_i2c_ids, st->client)->driver_data;
+
if (fwnode_property_present(fwnode, "adi,alrm-pol")) {
ret = fwnode_property_read_u32(fwnode, "adi,alrm-pol", &data);
if (ret)
@@ -409,8 +428,19 @@ static int max31827_init_client(struct max31827_state *st,

res |= FIELD_PREP(MAX31827_CONFIGURATION_ALRM_POL_MASK, !!data);
} else {
- res |= FIELD_PREP(MAX31827_CONFIGURATION_ALRM_POL_MASK,
- MAX31827_ALRM_POL_LOW);
+ switch (type) {
+ case max31827:
+ case max31828:
+ res |= FIELD_PREP(MAX31827_CONFIGURATION_ALRM_POL_MASK,
+ MAX31827_ALRM_POL_LOW);
+ break;
+ case max31829:
+ res |= FIELD_PREP(MAX31827_CONFIGURATION_ALRM_POL_MASK,
+ MAX31827_ALRM_POL_HIGH);
+ break;
+ default:
+ return -EOPNOTSUPP;
+ }
}

if (fwnode_property_present(fwnode, "adi,flt-q")) {
@@ -429,8 +459,19 @@ static int max31827_init_client(struct max31827_state *st,

res |= FIELD_PREP(MAX31827_CONFIGURATION_FLT_Q_MASK, lsb_idx);
} else {
- res |= FIELD_PREP(MAX31827_CONFIGURATION_FLT_Q_MASK,
- MAX31827_FLT_Q_1);
+ switch (type) {
+ case max31827:
+ res |= FIELD_PREP(MAX31827_CONFIGURATION_FLT_Q_MASK,
+ MAX31827_FLT_Q_1);
+ break;
+ case max31828:
+ case max31829:
+ res |= FIELD_PREP(MAX31827_CONFIGURATION_FLT_Q_MASK,
+ MAX31827_FLT_Q_4);
+ break;
+ default:
+ return -EOPNOTSUPP;
+ }
}

return regmap_write(st->regmap, MAX31827_CONFIGURATION_REG, res);
@@ -492,14 +533,19 @@ static int max31827_probe(struct i2c_client *client)
return PTR_ERR_OR_ZERO(hwmon_dev);
}

-static const struct i2c_device_id max31827_i2c_ids[] = {
- { "max31827", 0 },
- { }
-};
-MODULE_DEVICE_TABLE(i2c, max31827_i2c_ids);
-
static const struct of_device_id max31827_of_match[] = {
- { .compatible = "adi,max31827" },
+ {
+ .compatible = "adi,max31827",
+ .data = (void *)max31827
+ },
+ {
+ .compatible = "adi,max31828",
+ .data = (void *)max31828
+ },
+ {
+ .compatible = "adi,max31829",
+ .data = (void *)max31829
+ },
{ }
};
MODULE_DEVICE_TABLE(of, max31827_of_match);
--
2.34.1