From: Thomas Gleixner <[email protected]>
When a serial port is used for kernel console output, then all
modifications to the UART registers which are done from other contexts,
e.g. getty, termios, are interference points for the kernel console.
So far this has been ignored and the printk output is based on the
principle of hope. The rework of the console infrastructure which aims to
support threaded and atomic consoles, requires to mark sections which
modify the UART registers as unsafe. This allows the atomic write function
to make informed decisions and eventually to restore operational state. It
also allows to prevent the regular UART code from modifying UART registers
while printk output is in progress.
All modifications of UART registers are guarded by the UART port lock,
which provides an obvious synchronization point with the console
infrastructure.
To avoid adding this functionality to all UART drivers, wrap the
spin_[un]lock*() invocations for uart_port::lock into helper functions
which just contain the spin_[un]lock*() invocations for now. In a
subsequent step these helpers will gain the console synchronization
mechanisms.
Converted with coccinelle. No functional change.
Signed-off-by: Thomas Gleixner <[email protected]>
---
drivers/tty/serial/jsm/jsm_neo.c | 4 ++--
drivers/tty/serial/jsm/jsm_tty.c | 16 ++++++++--------
2 files changed, 10 insertions(+), 10 deletions(-)
diff --git a/drivers/tty/serial/jsm/jsm_neo.c b/drivers/tty/serial/jsm/jsm_neo.c
index 0c78f66276cd..2bd640428970 100644
--- a/drivers/tty/serial/jsm/jsm_neo.c
+++ b/drivers/tty/serial/jsm/jsm_neo.c
@@ -816,9 +816,9 @@ static void neo_parse_isr(struct jsm_board *brd, u32 port)
/* Parse any modem signal changes */
jsm_dbg(INTR, &ch->ch_bd->pci_dev,
"MOD_STAT: sending to parse_modem_sigs\n");
- spin_lock_irqsave(&ch->uart_port.lock, lock_flags);
+ uart_port_lock_irqsave(&ch->uart_port, &lock_flags);
neo_parse_modem(ch, readb(&ch->ch_neo_uart->msr));
- spin_unlock_irqrestore(&ch->uart_port.lock, lock_flags);
+ uart_port_unlock_irqrestore(&ch->uart_port, lock_flags);
}
}
diff --git a/drivers/tty/serial/jsm/jsm_tty.c b/drivers/tty/serial/jsm/jsm_tty.c
index 222afc270c88..ce0fef7e2c66 100644
--- a/drivers/tty/serial/jsm/jsm_tty.c
+++ b/drivers/tty/serial/jsm/jsm_tty.c
@@ -152,14 +152,14 @@ static void jsm_tty_send_xchar(struct uart_port *port, char ch)
container_of(port, struct jsm_channel, uart_port);
struct ktermios *termios;
- spin_lock_irqsave(&port->lock, lock_flags);
+ uart_port_lock_irqsave(port, &lock_flags);
termios = &port->state->port.tty->termios;
if (ch == termios->c_cc[VSTART])
channel->ch_bd->bd_ops->send_start_character(channel);
if (ch == termios->c_cc[VSTOP])
channel->ch_bd->bd_ops->send_stop_character(channel);
- spin_unlock_irqrestore(&port->lock, lock_flags);
+ uart_port_unlock_irqrestore(port, lock_flags);
}
static void jsm_tty_stop_rx(struct uart_port *port)
@@ -176,13 +176,13 @@ static void jsm_tty_break(struct uart_port *port, int break_state)
struct jsm_channel *channel =
container_of(port, struct jsm_channel, uart_port);
- spin_lock_irqsave(&port->lock, lock_flags);
+ uart_port_lock_irqsave(port, &lock_flags);
if (break_state == -1)
channel->ch_bd->bd_ops->send_break(channel);
else
channel->ch_bd->bd_ops->clear_break(channel);
- spin_unlock_irqrestore(&port->lock, lock_flags);
+ uart_port_unlock_irqrestore(port, lock_flags);
}
static int jsm_tty_open(struct uart_port *port)
@@ -241,7 +241,7 @@ static int jsm_tty_open(struct uart_port *port)
channel->ch_cached_lsr = 0;
channel->ch_stops_sent = 0;
- spin_lock_irqsave(&port->lock, lock_flags);
+ uart_port_lock_irqsave(port, &lock_flags);
termios = &port->state->port.tty->termios;
channel->ch_c_cflag = termios->c_cflag;
channel->ch_c_iflag = termios->c_iflag;
@@ -261,7 +261,7 @@ static int jsm_tty_open(struct uart_port *port)
jsm_carrier(channel);
channel->ch_open_count++;
- spin_unlock_irqrestore(&port->lock, lock_flags);
+ uart_port_unlock_irqrestore(port, lock_flags);
jsm_dbg(OPEN, &channel->ch_bd->pci_dev, "finish\n");
return 0;
@@ -307,7 +307,7 @@ static void jsm_tty_set_termios(struct uart_port *port,
struct jsm_channel *channel =
container_of(port, struct jsm_channel, uart_port);
- spin_lock_irqsave(&port->lock, lock_flags);
+ uart_port_lock_irqsave(port, &lock_flags);
channel->ch_c_cflag = termios->c_cflag;
channel->ch_c_iflag = termios->c_iflag;
channel->ch_c_oflag = termios->c_oflag;
@@ -317,7 +317,7 @@ static void jsm_tty_set_termios(struct uart_port *port,
channel->ch_bd->bd_ops->param(channel);
jsm_carrier(channel);
- spin_unlock_irqrestore(&port->lock, lock_flags);
+ uart_port_unlock_irqrestore(port, lock_flags);
}
static const char *jsm_tty_type(struct uart_port *port)
--
2.39.2