Preferred core rankings can be changed dynamically by the
platform based on the workload and platform conditions and
accounting for thermals and aging.
When this occurs, cpu priority need to be set.
Signed-off-by: Meng Li <[email protected]>
Reviewed-by: Wyes Karny <[email protected]>
---
drivers/cpufreq/amd-pstate.c | 34 ++++++++++++++++++++++++++++++++--
include/linux/amd-pstate.h | 6 ++++++
2 files changed, 38 insertions(+), 2 deletions(-)
diff --git a/drivers/cpufreq/amd-pstate.c b/drivers/cpufreq/amd-pstate.c
index 050e23594057..97b1d4674b4f 100644
--- a/drivers/cpufreq/amd-pstate.c
+++ b/drivers/cpufreq/amd-pstate.c
@@ -318,6 +318,7 @@ static int pstate_init_perf(struct amd_cpudata *cpudata)
WRITE_ONCE(cpudata->nominal_perf, AMD_CPPC_NOMINAL_PERF(cap1));
WRITE_ONCE(cpudata->lowest_nonlinear_perf, AMD_CPPC_LOWNONLIN_PERF(cap1));
WRITE_ONCE(cpudata->lowest_perf, AMD_CPPC_LOWEST_PERF(cap1));
+ WRITE_ONCE(cpudata->prefcore_ranking, AMD_CPPC_HIGHEST_PERF(cap1));
return 0;
}
@@ -339,6 +340,7 @@ static int cppc_init_perf(struct amd_cpudata *cpudata)
WRITE_ONCE(cpudata->lowest_nonlinear_perf,
cppc_perf.lowest_nonlinear_perf);
WRITE_ONCE(cpudata->lowest_perf, cppc_perf.lowest_perf);
+ WRITE_ONCE(cpudata->prefcore_ranking, cppc_perf.highest_perf);
if (cppc_state == AMD_PSTATE_ACTIVE)
return 0;
@@ -545,7 +547,7 @@ static void amd_pstate_adjust_perf(unsigned int cpu,
if (target_perf < capacity)
des_perf = DIV_ROUND_UP(cap_perf * target_perf, capacity);
- min_perf = READ_ONCE(cpudata->highest_perf);
+ min_perf = READ_ONCE(cpudata->lowest_perf);
if (_min_perf < capacity)
min_perf = DIV_ROUND_UP(cap_perf * _min_perf, capacity);
@@ -765,6 +767,32 @@ static void amd_pstate_init_prefcore(unsigned int cpu)
}
}
+static void amd_pstate_update_highest_perf(unsigned int cpu)
+{
+ struct cpufreq_policy *policy;
+ struct amd_cpudata *cpudata;
+ u32 prev_high = 0, cur_high = 0;
+ int ret;
+
+ if (!prefcore)
+ return;
+
+ ret = amd_pstate_get_highest_perf(cpu, &cur_high);
+ if (ret)
+ return;
+
+ policy = cpufreq_cpu_get(cpu);
+ cpudata = policy->driver_data;
+ prev_high = READ_ONCE(cpudata->prefcore_ranking);
+
+ if (prev_high != cur_high) {
+ WRITE_ONCE(cpudata->prefcore_ranking, cur_high);
+ sched_set_itmt_core_prio(cur_high, cpu);
+ }
+
+ cpufreq_cpu_put(policy);
+}
+
static int amd_pstate_cpu_init(struct cpufreq_policy *policy)
{
int min_freq, max_freq, nominal_freq, lowest_nonlinear_freq, ret;
@@ -947,7 +975,7 @@ static ssize_t show_amd_pstate_highest_perf(struct cpufreq_policy *policy,
u32 perf;
struct amd_cpudata *cpudata = policy->driver_data;
- perf = READ_ONCE(cpudata->highest_perf);
+ perf = READ_ONCE(cpudata->prefcore_ranking);
return sysfs_emit(buf, "%u\n", perf);
}
@@ -1513,6 +1541,7 @@ static struct cpufreq_driver amd_pstate_driver = {
.suspend = amd_pstate_cpu_suspend,
.resume = amd_pstate_cpu_resume,
.set_boost = amd_pstate_set_boost,
+ .update_highest_perf = amd_pstate_update_highest_perf,
.name = "amd-pstate",
.attr = amd_pstate_attr,
};
@@ -1527,6 +1556,7 @@ static struct cpufreq_driver amd_pstate_epp_driver = {
.online = amd_pstate_epp_cpu_online,
.suspend = amd_pstate_epp_suspend,
.resume = amd_pstate_epp_resume,
+ .update_highest_perf = amd_pstate_update_highest_perf,
.name = "amd-pstate-epp",
.attr = amd_pstate_epp_attr,
};
diff --git a/include/linux/amd-pstate.h b/include/linux/amd-pstate.h
index 446394f84606..030a6a97c2b9 100644
--- a/include/linux/amd-pstate.h
+++ b/include/linux/amd-pstate.h
@@ -39,11 +39,16 @@ struct amd_aperf_mperf {
* @cppc_req_cached: cached performance request hints
* @highest_perf: the maximum performance an individual processor may reach,
* assuming ideal conditions
+ * For platforms that do not support the preferred core feature, the
+ * highest_pef may be configured with 166 or 255, to avoid max frequency
+ * calculated wrongly. we take the fixed value as the highest_perf.
* @nominal_perf: the maximum sustained performance level of the processor,
* assuming ideal operating conditions
* @lowest_nonlinear_perf: the lowest performance level at which nonlinear power
* savings are achieved
* @lowest_perf: the absolute lowest performance level of the processor
+ * @prefcore_ranking: the preferred core ranking, the higher value indicates a higher
+ * priority.
* @max_freq: the frequency that mapped to highest_perf
* @min_freq: the frequency that mapped to lowest_perf
* @nominal_freq: the frequency that mapped to nominal_perf
@@ -70,6 +75,7 @@ struct amd_cpudata {
u32 nominal_perf;
u32 lowest_nonlinear_perf;
u32 lowest_perf;
+ u32 prefcore_ranking;
u32 max_freq;
u32 min_freq;
--
2.34.1