These CSRs contain the SDRAM Bank Groups and row[16]/row[17] bits mapping,
which are applicable for the DDR4 and LPDDR4 memory chips only. For the
rest of the memories the ADDRMAP[7-8] registers are unused by the
controller and are zeros by default. The zero values will be perceived by
the HIF/SDRAM mapping detection procedure as normal bit positions, which
is wrong. So in order to prevent that parse these registers only if they
are applicable for the detected DDR protocol.
Signed-off-by: Serge Semin <[email protected]>
---
drivers/edac/synopsys_edac.c | 19 +++++++++++++------
1 file changed, 13 insertions(+), 6 deletions(-)
diff --git a/drivers/edac/synopsys_edac.c b/drivers/edac/synopsys_edac.c
index b77bc84c0bb0..5a06038aedcb 100644
--- a/drivers/edac/synopsys_edac.c
+++ b/drivers/edac/synopsys_edac.c
@@ -1008,12 +1008,15 @@ static void snps_setup_row_address_map(struct snps_edac_priv *priv, u32 *addrmap
priv->row_shift[15] = (((addrmap[6] >> 24) & ROW_MAX_VAL_MASK) ==
ROW_MAX_VAL_MASK) ? 0 : (((addrmap[6] >> 24) &
ROW_MAX_VAL_MASK) + ROW_B15_BASE);
- priv->row_shift[16] = ((addrmap[7] & ROW_MAX_VAL_MASK) ==
- ROW_MAX_VAL_MASK) ? 0 : ((addrmap[7] &
- ROW_MAX_VAL_MASK) + ROW_B16_BASE);
- priv->row_shift[17] = (((addrmap[7] >> 8) & ROW_MAX_VAL_MASK) ==
- ROW_MAX_VAL_MASK) ? 0 : (((addrmap[7] >> 8) &
- ROW_MAX_VAL_MASK) + ROW_B17_BASE);
+
+ if (priv->info.sdram_mode == MEM_DDR4 || priv->info.sdram_mode == MEM_LPDDR4) {
+ priv->row_shift[16] = ((addrmap[7] & ROW_MAX_VAL_MASK) ==
+ ROW_MAX_VAL_MASK) ? 0 : ((addrmap[7] &
+ ROW_MAX_VAL_MASK) + ROW_B16_BASE);
+ priv->row_shift[17] = (((addrmap[7] >> 8) & ROW_MAX_VAL_MASK) ==
+ ROW_MAX_VAL_MASK) ? 0 : (((addrmap[7] >> 8) &
+ ROW_MAX_VAL_MASK) + ROW_B17_BASE);
+ }
}
static void snps_setup_column_address_map(struct snps_edac_priv *priv, u32 *addrmap)
@@ -1129,6 +1132,10 @@ static void snps_setup_bank_address_map(struct snps_edac_priv *priv, u32 *addrma
static void snps_setup_bg_address_map(struct snps_edac_priv *priv, u32 *addrmap)
{
+ /* Bank group signals are available on the DDR4 memory only */
+ if (priv->info.sdram_mode != MEM_DDR4)
+ return;
+
priv->bankgrp_shift[0] = (addrmap[8] &
BANKGRP_MAX_VAL_MASK) + BANKGRP_B0_BASE;
priv->bankgrp_shift[1] = (((addrmap[8] >> 8) & BANKGRP_MAX_VAL_MASK) ==
--
2.41.0