2023-09-23 04:42:47

by Matti Lehtimäki

Subject: [PATCH] ARM: dts: qcom: apq8026-samsung-matisse-wifi: Fix inverted hall sensor

Fix hall sensor GPIO polarity and also allow disabling the sensor.
Remove unneeded interrupt.

Fixes: f15623bda1dc ("ARM: dts: qcom: Add support for Samsung Galaxy Tab 4 10.1 (SM-T530)")
Signed-off-by: Matti Lehtimäki <[email protected]>
---
arch/arm/boot/dts/qcom/qcom-apq8026-samsung-matisse-wifi.dts | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/qcom/qcom-apq8026-samsung-matisse-wifi.dts b/arch/arm/boot/dts/qcom/qcom-apq8026-samsung-matisse-wifi.dts
index 884d99297d4c..f516e0426bb9 100644
--- a/arch/arm/boot/dts/qcom/qcom-apq8026-samsung-matisse-wifi.dts
+++ b/arch/arm/boot/dts/qcom/qcom-apq8026-samsung-matisse-wifi.dts
@@ -45,11 +45,11 @@ gpio-hall-sensor {

event-hall-sensor {
label = "Hall Effect Sensor";
- gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>;
- interrupts = <&tlmm 110 IRQ_TYPE_EDGE_FALLING>;
+ gpios = <&tlmm 110 GPIO_ACTIVE_LOW>;
linux,input-type = <EV_SW>;
linux,code = <SW_LID>;
debounce-interval = <15>;
+ linux,can-disable;
wakeup-source;
};
};
--
2.39.2

2023-09-28 00:58:09

by Bjorn Andersson

Subject: Re: [PATCH] ARM: dts: qcom: apq8026-samsung-matisse-wifi: Fix inverted hall sensor

On Fri, 22 Sep 2023 04:12:11 +0300, Matti Lehtimäki wrote:
> Fix hall sensor GPIO polarity and also allow disabling the sensor.
> Remove unneeded interrupt.
>
>

Applied, thanks!

[1/1] ARM: dts: qcom: apq8026-samsung-matisse-wifi: Fix inverted hall sensor
commit: 0b73519790d29e4bc71afc4882a9aa9ea649bcf7

Best regards,
--
Bjorn Andersson <[email protected]>