This series add base description of UART, TLMM, RPMHCC, GCC and RPMh PD
nodes which helps SM4450 boot to shell with console on boards with this
SoC.
Signed-off-by: Tengfei Fan <[email protected]>
---
This patch series depends on below patch series:
"[PATCH v2 0/4] clk: qcom: Add support for GCC and RPMHCC on SM4450"
https://lore.kernel.org/linux-arm-msm/[email protected]/
"[PATCH v4 0/2] pinctl: qcom: Add SM4450 pinctrl driver"
https://lore.kernel.org/linux-arm-msm/[email protected]/
v3 -> v4:
- adjustment the sequence of property and property-names
- update 0 to 0x0 for reg params
- remove unrelated change
- separate SoC change and board change
v2 -> v3:
- fix dtbs_check warning
- remove interconnect, iommu, scm and tcsr related code
- rearrangement dt node
- remove smmu, scm and tcsr related documentation update
- enable CONFIG_SM_GCC_4450 in defconfig related patch
v1 -> v2:
- setting "qcom,rpmh-rsc" compatible to the first property
- keep order by unit address
- move tlmm node into soc node
- update arm,smmu.yaml
- add enable pinctrl and interconnect defconfig patches
- remove blank line
- redo dtbs_check check
previous discussion here:
[1] v3: https://lore.kernel.org/linux-arm-msm/[email protected]
[2] v2: https://lore.kernel.org/linux-arm-msm/[email protected]
[3] v1: https://lore.kernel.org/linux-arm-msm/[email protected]
Ajit Pandey (1):
arm64: dts: qcom: sm4450: Add apps_rsc and cmd_db node
Tengfei Fan (5):
dt-bindings: interrupt-controller: qcom,pdc: document qcom,sm4450-pdc
arm64: dts: qcom: sm4450: Add RPMH and Global clock
arm64: dts: qcom: add uart console support for SM4450
arm64: dts: qcom: sm4450-qrd: add QRD4450 uart support
arm64: defconfig: enable clock controller and pinctrl
.../interrupt-controller/qcom,pdc.yaml | 1 +
arch/arm64/boot/dts/qcom/sm4450-qrd.dts | 19 +++-
arch/arm64/boot/dts/qcom/sm4450.dtsi | 107 ++++++++++++++++++
arch/arm64/configs/defconfig | 2 +
4 files changed, 127 insertions(+), 2 deletions(-)
base-commit: 940fcc189c51032dd0282cbee4497542c982ac59
--
2.17.1