Some commands in tps25750 take longer than 1 second
to complete, and some responses need some delay before
the result becomes available.
Signed-off-by: Abdel Alkuor <[email protected]>
---
Changes in v6:
- Use tps6598x_exec_cmd as a wrapper
Changes in v5:
- Incorporating tps25750 into tps6598x driver
drivers/usb/typec/tipd/core.c | 19 +++++++++++++++----
1 file changed, 15 insertions(+), 4 deletions(-)
diff --git a/drivers/usb/typec/tipd/core.c b/drivers/usb/typec/tipd/core.c
index 37b56ce75f39..32420c61660d 100644
--- a/drivers/usb/typec/tipd/core.c
+++ b/drivers/usb/typec/tipd/core.c
@@ -282,9 +282,10 @@ static void tps6598x_disconnect(struct tps6598x *tps, u32 status)
power_supply_changed(tps->psy);
}
-static int tps6598x_exec_cmd(struct tps6598x *tps, const char *cmd,
+static int tps6598x_exec_cmd_tmo(struct tps6598x *tps, const char *cmd,
size_t in_len, u8 *in_data,
- size_t out_len, u8 *out_data)
+ size_t out_len, u8 *out_data,
+ u32 cmd_timeout_ms, u32 res_delay_ms)
{
unsigned long timeout;
u32 val;
@@ -307,8 +308,7 @@ static int tps6598x_exec_cmd(struct tps6598x *tps, const char *cmd,
if (ret < 0)
return ret;
- /* XXX: Using 1s for now, but it may not be enough for every command. */
- timeout = jiffies + msecs_to_jiffies(1000);
+ timeout = jiffies + msecs_to_jiffies(cmd_timeout_ms);
do {
ret = tps6598x_read32(tps, TPS_REG_CMD1, &val);
@@ -321,6 +321,9 @@ static int tps6598x_exec_cmd(struct tps6598x *tps, const char *cmd,
return -ETIMEDOUT;
} while (val);
+ /* some commands require delay for the result to be available */
+ mdelay(res_delay_ms);
+
if (out_len) {
ret = tps6598x_block_read(tps, TPS_REG_DATA1,
out_data, out_len);
@@ -345,6 +348,14 @@ static int tps6598x_exec_cmd(struct tps6598x *tps, const char *cmd,
return 0;
}
+static int tps6598x_exec_cmd(struct tps6598x *tps, const char *cmd,
+ size_t in_len, u8 *in_data,
+ size_t out_len, u8 *out_data)
+{
+ return tps6598x_exec_cmd_tmo(tps, cmd, in_len, in_data,
+ out_len, out_data, 1000, 0);
+}
+
static int tps6598x_dr_set(struct typec_port *port, enum typec_data_role role)
{
const char *cmd = (role == TYPEC_DEVICE) ? "SWUF" : "SWDF";
--
2.34.1
On Sat, Sep 23, 2023 at 03:39:47AM -0400, Abdel Alkuor wrote:
> Some commands in tps25750 take longer than 1 second
> to complete, and some responses need some delay before
> the result becomes available.
>
> Signed-off-by: Abdel Alkuor <[email protected]>
Reviewed-by: Heikki Krogerus <[email protected]>
> ---
> Changes in v6:
> - Use tps6598x_exec_cmd as a wrapper
> Changes in v5:
> - Incorporating tps25750 into tps6598x driver
>
> drivers/usb/typec/tipd/core.c | 19 +++++++++++++++----
> 1 file changed, 15 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/usb/typec/tipd/core.c b/drivers/usb/typec/tipd/core.c
> index 37b56ce75f39..32420c61660d 100644
> --- a/drivers/usb/typec/tipd/core.c
> +++ b/drivers/usb/typec/tipd/core.c
> @@ -282,9 +282,10 @@ static void tps6598x_disconnect(struct tps6598x *tps, u32 status)
> power_supply_changed(tps->psy);
> }
>
> -static int tps6598x_exec_cmd(struct tps6598x *tps, const char *cmd,
> +static int tps6598x_exec_cmd_tmo(struct tps6598x *tps, const char *cmd,
> size_t in_len, u8 *in_data,
> - size_t out_len, u8 *out_data)
> + size_t out_len, u8 *out_data,
> + u32 cmd_timeout_ms, u32 res_delay_ms)
> {
> unsigned long timeout;
> u32 val;
> @@ -307,8 +308,7 @@ static int tps6598x_exec_cmd(struct tps6598x *tps, const char *cmd,
> if (ret < 0)
> return ret;
>
> - /* XXX: Using 1s for now, but it may not be enough for every command. */
> - timeout = jiffies + msecs_to_jiffies(1000);
> + timeout = jiffies + msecs_to_jiffies(cmd_timeout_ms);
>
> do {
> ret = tps6598x_read32(tps, TPS_REG_CMD1, &val);
> @@ -321,6 +321,9 @@ static int tps6598x_exec_cmd(struct tps6598x *tps, const char *cmd,
> return -ETIMEDOUT;
> } while (val);
>
> + /* some commands require delay for the result to be available */
> + mdelay(res_delay_ms);
> +
> if (out_len) {
> ret = tps6598x_block_read(tps, TPS_REG_DATA1,
> out_data, out_len);
> @@ -345,6 +348,14 @@ static int tps6598x_exec_cmd(struct tps6598x *tps, const char *cmd,
> return 0;
> }
>
> +static int tps6598x_exec_cmd(struct tps6598x *tps, const char *cmd,
> + size_t in_len, u8 *in_data,
> + size_t out_len, u8 *out_data)
> +{
> + return tps6598x_exec_cmd_tmo(tps, cmd, in_len, in_data,
> + out_len, out_data, 1000, 0);
> +}
> +
> static int tps6598x_dr_set(struct typec_port *port, enum typec_data_role role)
> {
> const char *cmd = (role == TYPEC_DEVICE) ? "SWUF" : "SWDF";
> --
> 2.34.1
--
heikki
On Wed, Sep 27, 2023 at 10:00:50AM +0300, Heikki Krogerus wrote:
> On Sat, Sep 23, 2023 at 03:39:47AM -0400, Abdel Alkuor wrote:
> > Some commands in tps25750 take longer than 1 second
> > to complete, and some responses need some delay before
> > the result becomes available.
> >
> > Signed-off-by: Abdel Alkuor <[email protected]>
>
> Reviewed-by: Heikki Krogerus <[email protected]>
Hold on!
You are not specifying the driver in the subject. You need to fix
that.
> > ---
> > Changes in v6:
> > - Use tps6598x_exec_cmd as a wrapper
> > Changes in v5:
> > - Incorporating tps25750 into tps6598x driver
> >
> > drivers/usb/typec/tipd/core.c | 19 +++++++++++++++----
> > 1 file changed, 15 insertions(+), 4 deletions(-)
> >
> > diff --git a/drivers/usb/typec/tipd/core.c b/drivers/usb/typec/tipd/core.c
> > index 37b56ce75f39..32420c61660d 100644
> > --- a/drivers/usb/typec/tipd/core.c
> > +++ b/drivers/usb/typec/tipd/core.c
> > @@ -282,9 +282,10 @@ static void tps6598x_disconnect(struct tps6598x *tps, u32 status)
> > power_supply_changed(tps->psy);
> > }
> >
> > -static int tps6598x_exec_cmd(struct tps6598x *tps, const char *cmd,
> > +static int tps6598x_exec_cmd_tmo(struct tps6598x *tps, const char *cmd,
> > size_t in_len, u8 *in_data,
> > - size_t out_len, u8 *out_data)
> > + size_t out_len, u8 *out_data,
> > + u32 cmd_timeout_ms, u32 res_delay_ms)
> > {
> > unsigned long timeout;
> > u32 val;
> > @@ -307,8 +308,7 @@ static int tps6598x_exec_cmd(struct tps6598x *tps, const char *cmd,
> > if (ret < 0)
> > return ret;
> >
> > - /* XXX: Using 1s for now, but it may not be enough for every command. */
> > - timeout = jiffies + msecs_to_jiffies(1000);
> > + timeout = jiffies + msecs_to_jiffies(cmd_timeout_ms);
> >
> > do {
> > ret = tps6598x_read32(tps, TPS_REG_CMD1, &val);
> > @@ -321,6 +321,9 @@ static int tps6598x_exec_cmd(struct tps6598x *tps, const char *cmd,
> > return -ETIMEDOUT;
> > } while (val);
> >
> > + /* some commands require delay for the result to be available */
> > + mdelay(res_delay_ms);
> > +
> > if (out_len) {
> > ret = tps6598x_block_read(tps, TPS_REG_DATA1,
> > out_data, out_len);
> > @@ -345,6 +348,14 @@ static int tps6598x_exec_cmd(struct tps6598x *tps, const char *cmd,
> > return 0;
> > }
> >
> > +static int tps6598x_exec_cmd(struct tps6598x *tps, const char *cmd,
> > + size_t in_len, u8 *in_data,
> > + size_t out_len, u8 *out_data)
> > +{
> > + return tps6598x_exec_cmd_tmo(tps, cmd, in_len, in_data,
> > + out_len, out_data, 1000, 0);
> > +}
> > +
> > static int tps6598x_dr_set(struct typec_port *port, enum typec_data_role role)
> > {
> > const char *cmd = (role == TYPEC_DEVICE) ? "SWUF" : "SWDF";
> > --
> > 2.34.1
>
> --
> heikki
--
heikki
On Wed, Sep 27, 2023 at 10:18:04AM +0300, Heikki Krogerus wrote:
> On Wed, Sep 27, 2023 at 10:00:50AM +0300, Heikki Krogerus wrote:
> > On Sat, Sep 23, 2023 at 03:39:47AM -0400, Abdel Alkuor wrote:
> > > Some commands in tps25750 take longer than 1 second
> > > to complete, and some responses need some delay before
> > > the result becomes available.
> > >
> > > Signed-off-by: Abdel Alkuor <[email protected]>
> >
> > Reviewed-by: Heikki Krogerus <[email protected]>
>
> Hold on!
>
> You are not specifying the driver in the subject. You need to fix
> that.
>
I will send new patches with their subject updated.
Thanks,
Abdel