2023-09-26 20:54:17

by Stephan Gerhold

[permalink] [raw]
Subject: [PATCH 05/13] arm64: dts: qcom: msm8916-samsung-serranove: Add sound and modem

Enable sound and modem for the Samsung S4 Mini Value Edition. The setup
is similar to most MSM8916 devices, i.e.:

- QDSP6 audio
- Speaker/earpiece/headphones/microphones via digital/analog codec in
MSM8916/PM8916
- WWAN Internet via BAM-DMUX

except:

- Samsung-specific audio jack detection (not supported yet)

Signed-off-by: Stephan Gerhold <[email protected]>
---
arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts | 14 ++++++++++++++
1 file changed, 14 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts
index 68da2a2d3077..5f33aa0ad7b5 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts
@@ -6,6 +6,8 @@
/dts-v1/;

#include "msm8916-pm8916.dtsi"
+#include "msm8916-modem-qdsp6.dtsi"
+
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/irq.h>
@@ -319,6 +321,10 @@ &blsp_uart2 {
status = "okay";
};

+&mpss_mem {
+ reg = <0x0 0x86800000 0x0 0x5a00000>;
+};
+
&pm8916_resin {
status = "okay";
linux,code = <KEY_VOLUMEDOWN>;
@@ -350,6 +356,14 @@ &sdhc_2 {
no-1-8-v;
};

+&sound {
+ status = "okay";
+ audio-routing =
+ "AMIC1", "MIC BIAS External1",
+ "AMIC2", "MIC BIAS Internal2",
+ "AMIC3", "MIC BIAS External1";
+};
+
&usb {
status = "okay";
extcon = <&muic>, <&muic>;

--
2.42.0


2023-09-26 22:02:00

by Konrad Dybcio

[permalink] [raw]
Subject: Re: [PATCH 05/13] arm64: dts: qcom: msm8916-samsung-serranove: Add sound and modem

On 26.09.2023 18:51, Stephan Gerhold wrote:
> Enable sound and modem for the Samsung S4 Mini Value Edition. The setup
> is similar to most MSM8916 devices, i.e.:
>
> - QDSP6 audio
> - Speaker/earpiece/headphones/microphones via digital/analog codec in
> MSM8916/PM8916
> - WWAN Internet via BAM-DMUX
>
> except:
>
> - Samsung-specific audio jack detection (not supported yet)
>
> Signed-off-by: Stephan Gerhold <[email protected]>
> ---
> arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts | 14 ++++++++++++++
> 1 file changed, 14 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts
> index 68da2a2d3077..5f33aa0ad7b5 100644
> --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts
> +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts
> @@ -6,6 +6,8 @@
> /dts-v1/;
>
> #include "msm8916-pm8916.dtsi"
> +#include "msm8916-modem-qdsp6.dtsi"
> +
> #include <dt-bindings/gpio/gpio.h>
> #include <dt-bindings/input/input.h>
> #include <dt-bindings/interrupt-controller/irq.h>
> @@ -319,6 +321,10 @@ &blsp_uart2 {
> status = "okay";
> };
>
> +&mpss_mem {
> + reg = <0x0 0x86800000 0x0 0x5a00000>;
> +};
> +
> &pm8916_resin {
> status = "okay";
> linux,code = <KEY_VOLUMEDOWN>;
> @@ -350,6 +356,14 @@ &sdhc_2 {
> no-1-8-v;
> };
>
> +&sound {
> + status = "okay";
> + audio-routing =
> + "AMIC1", "MIC BIAS External1",
> + "AMIC2", "MIC BIAS Internal2",
> + "AMIC3", "MIC BIAS External1";
> +};
I *think* we should be able to harmlessly enable &audio globally?

Konrad